OPERATOR’S MANUAL
650935-X-C
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
INCLUDE MANUALS: 66266-X-B Lower Pump End (pn 97999-829), 67147-B Hydraulic Motor (pn 97999-1219) &
S-632 General Information Manual (pn 97999-624)
RELEASED: 9-29-00
REVISED:
(REV. C)
11-10-06
650935-X43-C
CHOP-CHECK PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
3.6:1 RATIO
6” STROKE
CARBON STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
PUMP DATA
•
Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
637449 for repair of hydraulic motor section.
637074-X43-B for repair of lower pump section. Refer to the
chart on page 2 for description of -XXX options.
MODEL 650935-X43-C
•
•
Hydraulic Inlet (not shown)
3/8 - 18 N.P.T.F. - 2 (female)
Hydraulic Outlet (female)
1/2 - 14 N.P.T.F. - 2
SPECIFICATIONS
Hydraulic Motor 67147-B
(see manual 67147-B)
Model Series (refer to option chart) . . . . . . . . 650935-X43-C
Type . . . . . . . . . . . . . . . . . . Hydraulically Operated, Chop-Check
Ratio . . . . . . . . . . . . . . . . . . . . . . . . . 3.6:1
47-15/32"
(1206 mm)
Spacer Section
Hydraulic Motor . . . . . . . . . . . . . . . . . 67147-B
Motor Repair Kit . . . . . . . . . . . . . . . 637449
Screw 93342-1 (3)
Washer Y79-625 (3)
Motor Size . . . . . . . . . . . . . . . . . . . 2.062 sq." (13.3 sq. cm)
Stroke . . . . . . . . . . . . . . . . . . . . . . 6" (15.2 cm)
Hydraulic Inlet (female) . . . . . . . . . . 3/8 - 18 N.P.T.F. - 2
Hydraulic Return (female) . . . . . . . . 1/2 - 14 N.P.T.F. - 2
Lower Pump End Series . . . . . . . . . . 66266-X43-B
Lower Pump Repair Kit . . . . . . . . . 637074-X43-B
Material Inlet . . . . . . . . . . . . . . . . . N/A
Connector (see Figure 2)
Spacer Rod 93345-1 (3)
33-3/32"
(841 mm)
Material Outlet (female) . . . . . . . . . 1 - 11-1/2 N.P.T.F. - 1ꢀ
Weight . . . . . . . . . . . . . . . . . . . . . . . . 62.1 lbs (28.2 kgs)
Material Outlet (female)
1 -11-1/2 N.P.T.F. - 1
90_ from hydraulic inlet
17-3/4"
(450 mm)
PERFORMANCE
Hydraulic Inlet Pressure Range . . . 50 - 1200 p.s.i. (3.4 - 83 bar)
Fluid Pressure Range . . . . . . 180 - 4320 p.s.i. (12.4 - 297.9 bar)
Required H-power @ 50 c.p.m. . . . . . . 3.2 @ 1200 (83 bar)
Hydraulic flow required @ 50 c.p.m. . 4.9 g.p.m. (18.5 l.p.m.)
Maximum rec’d Cycles / Minute . . . . . 50
Displacement In Per Cycle . . . . . . . . 6.959
Volume / Cycle . . . . . . . . . . . . . . . . . . 3.9 oz. (114 ml)
Cycles Per Gallon . . . . . . . . . . . . . . . 33.2
Lower Pump 66266-X43-B
(see manual 66266-X-B)
3-15/32"
(88 mm)
3
Figure 1
Flow @ 50 Cycles / Minute . . . . . . . . . 1.5 g.p.m. (5.7 l.p.m.)
Noise Level . . . . . . . . . . . . . . . . . . . . N/A
Maximum Temperature Limit . . . . . . . 130_ F (54_ C)
Accessories available: 61937-1 wall bracket and 65138 floor mounting flange.
IMPORTANT
This is one of the four documents which support the pump. Re-
placement copies of these forms are available upon request.
= 650935-X-C Model Operator’s Manual (pn 97999-836)
- S-632 General Information - Industrial Piston Pumps (pn 97999-624)
- 66266-X-B Lower Pump End Operator’s Manual (pn 97999-829)
- 67147-B Hydraulic Motor Operator’s Manual (pn 97999-1219)
INGERSOLL RAND COMPANY LTD
P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 43506-0151
& (800) 276-4658 D FAX (800) 266-7016
E2006
CCN 99778888
|