Quick Setup Guide
NS-HT511 5.1 Home Theater System
Front controls features
Congratulations on your purchase of a high-quality Insignia
product. Your NS-HT511 represents the state of the art in home
theater system design and is designed for reliable and
trouble-free performance.
Features
Front controls
ITEM DESCRIPTION
FUNCTION
1
2
ON/STANDBY button
HDMI THRU indicator
Press to turn on your stereo receiver.
Lights when the HDMI pass-through function is activated
in standby mode.
Package contents
• AM antenna
• Surround Sound
Receiver (NS-AV511)
• Front speakers (2)
• Center speaker
• Surround speakers (2)
• Subwoofer
• Remote control
• AA batteries (2)
• FM antenna
3
4
5
6
7
STANDBY indicator
Remote control sensor
Display
SETUP button
TUNING /
Lights red when your stereo receiver is in standby mode.
Receives the signal from the remote control.
Provides information about receiver functions and settings.
Press to open the on-screen menus.
Press TUNING / to tune the radio to the next or
previous station
• Color labels for speaker cables
• Speaker cables:
• 11 ft. (3)
• 26 ft. (2)
• RCA cable 10 ft.
• Rubber spacers for speakers (20)
• User Guide
PRESET /
Press PRESET / to tune the radio to the next or
previous station preset.
• Quick Setup Guide
ENTER
Press ENTER to conꢀrm a selection.
8
9
RETURN button
MEMORY button
In menu mode, press to return to the main menu.
Press to save a radio station preset. Press with the TUNING
MODE button to clear presets.
Back view features
ITEM DESCRIPTION
FUNCTION
10 TUNING MODE button
Press to turn on the receiver tuning mode and listen to
1
DIGITAL IN jacks
Plug the optical digital cable from a game (1) or
TV/CD (2) into the upper jacks, or the coaxial
digital cable from a BD/DVD into the lower jack.
Plug the HDMI signal input cable from a GAME
(IN4), CBL/SAT (IN3), VCR/DVR (IN2), BD/DVD
(IN1).
Plug the HDMI output signal cable to a TV or
monitor into the OUT jack.
the radio. Press with the MEMORY button to clear presets.
Fluorescent display
11 MASTER VOLUME knob
12 Headphone jack
13 Input selector buttons
14 Protective cap
Turn to increase or decrease the volume.
Plug your headphones into this jack.
Press to select the input signal source you want.
Remove when using jack.
2
HDMI jacks
15 AUX INPUT VIDEO jack
Plug an external video source into this jack.
3
4
ANTENNA connectors Connect a 75 ohm FM antenna to the coaxial
connector or an AM loop antenna to the wire
connectors.
16 AUX INPUT AUDIO L/R jacks Plug an external sound source into this jack.
17 HOME button Press to access audio settings.
Connect the front speakers to these jacks.
Connect the left and right surround speakers and
the center speaker to these connectors. If you use
the RF-RBCARD to connect your surround speakers,
do not connect them here.
FRONT SPEAKERS
SURROUND SPEAKERS
CENTER SPEAKER
Fluorescent display features
Back view
ITEM DESCRIPTION
ITEM DESCRIPTION
1
2
3
4
Audio input indicator
Listening mode indicator
Tuning indicators
5
6
MUTING indicator
DIGITAL display
5
6
AC power cord
Plug this cord into an AC power outlet.
COMPONENT video jacks Plug the cables from a component video source
into the #1 (BD/DVD) or #2 (CBL/SAT) jacks.
Plug the cables to a component video monitor into
the OUT jacks.
SLEEP indicator
The jacks are color coded (red, green, and blue) to
correspond to the cable connectors.
Plug the composite video and audio L/R output
cables from the indicated devices into these jacks.
For video recording, plug the composite video and
audio L/R input cables to a VCR or DVR into the
OUT jacks
Installing batteries in the remote control
7
Composite Video and
1
2
Remove the cover.
Audio L/R jacks
Insert two AA batteries into the compartment
matching the polarity indicated.
Replace the cover.
CAUTION: Do not use Ni-Cd rechargeable
batteries in this remote control.
3
8
9
MONITOR OUT V (Video) Connect this jack to a TV monitor.
SUBWOOFER Connect the subwoofer to this jack.
Remove the batteries if they are not to be used
for an extended period of time.
Actual product may vary from image shown.
Batteries (AA)
|