Quick Setup Guide
Low Wattage Travel Converter/Adapter NS-TADPCON / NS-TADPCON-C
|
3 Compare the power outlet voltage to your device’s voltage.
Note: The voltage of some devices will be a range. If your power
outlet voltage is in the range of your device’s voltage (for example, a
120-240V device and a 240V power outlet), use ADAPTER mode.
4 Check the wattage of your device.
If you use ADAPTER mode:
Package contents
Making sure your device is compatible
Warning: Failure to select the correct voltage setting could damage
your device. DO NOT use this converter with high-wattage devices, such
as hair dryers and curling irons.
Check out these important
safety instructions to keep
yourself and your devices safe.
BE
•
Low wattage travel converter/adapter
CAREFUL!
•
Quick Setup Guide
3-prong blades
Device wattage is:
Instructions:
275W max. at 100-120V
575W max. at 100-240V
You can use this adapter.
See “Selecting your plug”
for further instructions.
The power outlet
voltage is:
Slide the mode
switch to:
Features
•
•
Read and review these instructions before using the
converter/adapter.
Before using the converter/adapter, check the product you
intend to connect to the converter/adapter for the
manufacturer’s voltage and wattage rating, which should be
located on the product.
Caution: Adapters alone do not convert voltage. To avoid damaging
your device, select CONVERTER when necessary.
DO NOT use this product with hair dryers, curling irons, or
other high-wattage devices.
Do not leave the converter/adapter in the power outlet
when not in use. Do not continue to use the
converter/adapter if it is not working properly, has been
damaged, or dropped in water.
Round pins
Plug
selector
•
•
•
The same as your device’s
voltage
In the range of your
device’s voltage
100V and your device is
120V
ADAPTER
576W or more
Your device is not
compatible. Do NOT use this
adapter with your device.
1 Determine the voltage of the power outlet you want to use.
See the table on the next page for common voltages.
2 Check the voltage of the device you want to connect to the
power outlet.
Flat angled and
parallel blades
If you use CONVERTER mode:
•
•
Device wattage is:
Instructions:
•
•
Greater than your device’s CONVERTER
voltage
Power indicator
0-25W
You can use this converter.
See “Selecting your plug”
for further instructions.
Less than your device’s
voltage*
Your device is not
compatible. Do NOT use
this converter/adapter
with your device
Mode
switch
•
•
Check your appliance label to see if it requires less than 2.5A.
No grounding. This product is for use with unearthed or
double-insulated appliance only.
26W or more
Your device is not
compatible. Do NOT use this
converter with your device.
Adapter
outlet
*Note: If the power outlet is 100V and your device is 120V, use
ADAPTER mode.
Warning: This product is intended for adult use. This product is NOT
intended for use by unsupervised children. Choose proper settings and
plug in this product before directly supervising children using devices
Before using your new product, please read
these instructions to prevent any damage.
connected to this product.
|