Quick Setup Guide NS-PU98505/NS-PU98505-C
I
USB to Ethernet Adapter
Thank you for purchasing this high quality Insignia USB to Ethernet
Adapter. Use this adapter to instantly connect to a 10/100 Mbps network
from the USB port on your desktop or laptop computer.
3 When the installation is complete, click Finish to restart your
computer and finish the installation.
PACKAGE CONTENTS
•
•
•
USB to Ethernet Adapter
Driver CD
Quick Setup Guide
SETTING UP THE ADAPTER
Note: The driver software must be installed before you connect the adapter. The
adapter does not need to be connected for the software to install.
To install on a Windows PC:
1 Insert the driver CD into the optical drive on your computer. The
software should run automatically. The initial installation screen opens.
Note: If the software does not run automatically, locate and double-click
Run.exe on the driver CD.
4 Connect the USB connector on the adapter to an open USB port on
your desktop or laptop computer.
5 Connect a network cable to the Ethernet port on the adapter.
2 Click on your operating system, then follow on-screen instructions.
To install on a Mac:
1 Insert the driver CD into the optical drive of your computer. On the
driver CD, locate and click AX88772.dmg. Click the AX88772 icon
(
). The driver setup driver setup dialog box opens.
Note: If the computer has Windows 8, you do not need to install the driver from
the disc. The drivers are installed automatically.
Before using your new product, please read these instructions to prevent any damage.
|