Contents
Safety precautions
Preparation
2
2
3
3
4
5
6
7
COLOUR TELEVISION
......
1 Confirm which remote control you have
INSTRUCTIONS
...................................
2 Inserting the batteries
...
3
Connecting the aerial and external devices
Thank you for buying this JVC
colour television.
........................
4 Connecting the power cord
..............................................
5 SETUP TOUR
To make sure you understand how to
use your new TV, please read this
manual thoroughly before you begin.
Basic operation
Remote control buttons and functions 8
.....................................
ECO SENSOR button
8
8
8
8
9
9
9
9
10
10
11
11
12
12
13
13
13
14
14
14
15
16
16
16
17
18
19
.................................
PICTURE MODE button
COLOUR SYSTEM button
SOUND SYSTEM button
.............................
...............................
AV-16N211
AV-21Y211
.............................................
.............................................
DISPLAY button
MUTING button
.........................................
OFF TIMER button
PICTURE BOOSTER button
...........................
........................................
RETURN + button
..............................
CHANNEL SCAN button
Using the TV’s menus
............................................
...........................................................
Basic operation
INPUT
.....................................................
ON TIMER
AUTO SHUTOFF
..........................................
.................................................
..................................................
CHILD LOCK
BLUE BACK
..........................................
...............................................
AI ECO DISPLAY
SETUP TOUR
.......................................
AUTO CH PRESET
MANUAL CH PRESET
..................................
..............................................................
SKIP
..................................................
LANGUAGE
Picture Adjustments
....................................
TV buttons and parts
Using the buttons on the TV
Troubleshooting
Specifications
Back cover
GGT0010-001A-E
0803-NIC-JMT
© 2003 VICTOR COMPANY OF JAPAN, LIMITED
Preparation
1 Confirm which remote control you have
Your TV comes with one of the two remote controls shown below. Functions you
can operate differ depending on the type of remote control.
RM-C375GY
For TV model:
AV-21Y211
RM-C367GY
For TV model:
AV-16N211
PICTURE
ECO
PICTURE
BOOSTER
POWER
POWER
BOOSTER
SENSOR
SYSTEM
COLOUR SOUND
SYSTEM
COLOUR SOUND
PICTURE
MODE
PICTURE
MODE
1
2
3
6
9
1
2
3
6
9
TV/VIDEO
TV/VIDEO
4
5
8
0
4
5
8
0
OFF
TIMER
OFF
TIMER
7
7
CHANNEL
SCAN
CHANNEL
SCAN
RETURN+
RETURN+
- --
/
- --
/
DISPLAY
MUTING
DISPLAY
MUTING
MENU
MENU
CHANNEL
VOLUME
CHANNEL
VOLUME
REMOTE CONTROL UNIT
RM-C367GY
RM-C375GY
2 Inserting the batteries
Correctly insert two batteries, observing the and
,
.
polarities and inserting the end first.
.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new
batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3 Connecting the aerial and external devices
• For further details, refer to the manuals provided with the devices you are connecting.
• Connecting cables are not supplied.
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either
jack is output through both. You cannot provide input to both the front and rear jacks at the
same time. Disconnect one input, or use one of the jacks as an output jack only (for
monitoring or recording).
■ Connecting the aerial and VCR
Connecting the aerial
To install rod aerial:
(1)
Install into the top-rear aerial holder. Once installed, it cannot be removed.
VHF/UHF outdoor aerial
Indoor aerial
Rod aerial
Aerial holder
(2)
Matching aerial adapter
(supplied)
1
2
(3)
VIDEO AUDIO
IN
VIDEO AUDIO
IN
OUT
OUT
• Illustration of AV-21Y211
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
VIDEO AUDIO
IN
OUT
3
To video
output
To audio
output
To RF
output
1
VCR
• Illustration of AV-21Y211
To aerial input
4
Preparation
■ Connecting other external devices
To audio
output
To video
output
VIDEO AUDIO
VCR (for playing)
IN
OUT
VCR (for recording)
To audio
input
To video
input
• Illustration of AV-21Y211
To video
output
Camcorder
or
TV game
To audio
output
MENU
VIDEO
AUDIO
IN
Headphones
• Illustration of AV-21Y211
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
• Because the front AUDIO jacks are monaural, even stereo input becomes monaural.
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5
Preparation
5 SETUP TOUR
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.
•In case of resetting that the reason for such as removal, you can set the AUTO CH
PRESET function on the “MENU 3” menu. For details, see page 14.
1 Press the Main power button
on the TV.
The POWER lamp lights. After the
JVC logo has been displayed, the TV
ON TIMER POWER
automatically switches to the
language setting mode.
POWER lamp Main power button
CHANNEL
SCAN
RETURN+
- --
/
0
SETUP TOUR
DISPLAY
MUTING
DISPLAY
button
MENU
/
MENU
MENU –/+
buttons
buttons
2 Press the MENU M buttons to
select the on-screen language.
CHANNEL
VOLUME
SETUP TOUR
LANGUAGE
ENGLISH
NEXT
EXIT BY
OPERATE BY -+
DISPLAY
3 Press the MENU y button.
The AUTO PROGRAMMING function will start and the indicator blinks.
SETUP TOUR
NOW PROGRAMMING
STOP BY -+
• To stop the AUTO PROGRAMMING function, press the MENU m buttons.
When all the TV channels that can be received on your TV have been preset, the
display goes out and the AUTO PROGRAMMING function operation is completed.
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH
PRESET function. For details, see page 15.
6
Basic operation
The illustration below is for the remote
control RM-C367GY. Your remote control
may not look exactly like the illustration.
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the
Main power button on the TV then press
the POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
PICTURE
ECO
POWER
BOOSTER
SENSOR
- the CHANNEL m button
- the Number buttons
SYSTEM
COLOUR SOUND
PICTURE
MODE
- the TV/VIDEO button
1
2
3
6
9
TV/VIDEO
2 Select a channel.
4
5
8
0
■ Press the CHANNEL m button.
OFF
7
TIMER
• Up/down selection cannot be selected for
channels to which the SKIP has been set to
“YES”. See page 16.
CHANNEL
SCAN
RETURN+
- --
/
DISPLAY
MUTING
■ Press the Number buttons to enter
the channel number.
MENU
• If you want to enter a two-digit number,
press the -/-- button to select the two digit
mode “--”, then enter the channel
number.
CHANNEL
VOLUME
REMOTE CONTROL UNIT
RM-C367GY
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your
TV for a long time or if you wish to save
energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 12.
7
Remote control buttons and functions
ECO SENSOR button
COLOUR SYSTEM button
<AV-16N211 only>
If the picture is not clear or no colour
appears, change the current colour system
to another colour system.
You can adjust this TV so that the screen
automatically adjusts to the optimum
contrast according to the brightness of
your room. This function reduces eye
strain and the power consumption of this
TV.
Press this button to select the colour
system.
SECAM
NTSC3.58
AUTO
PAL
NTSC4.43
Press this button to select the desired
mode.
AUTO:
Automatic colour system selection.
AI ECO SENSOR 1:
• For the colour systems in each country or
region, see the table “Broadcasting systems”
on Back cover.
The AI ECO SENSOR function switches
on.
Usually, it is recommended to watch the TV
in this mode.
• If the picture is not normal in the AUTO
mode, change the AUTO mode to another
colour system.
AI ECO SENSOR 2:
The AI ECO SENSOR function switches
on.
SOUND SYSTEM button
If you feel the screen in the “AI ECO
SENSOR 1” mode is too dark, select this
mode.
If the sound is not clear even when the
picture appears normal, change the
current sound system to another sound
system.
AI ECO SENSOR OFF:
The AI ECO SENSOR function switches
off.
Press this button to select the sound
system.
• You can display on the screen the effect of the
AI ECO SENSOR function.
For details, see “AI ECO DISPLAY” on page 14.
B/G
I
D/K
M
• For the sound systems in each country or
region, see the table “Broadcasting systems”
on Back cover.
PICTURE MODE button
You can select one of three picture
adjustment settings as you like.
• You cannot select any sound system when in
a VIDEO mode.
Press this button to select a mode.
BRIGHT:
Heightens contrast and sharpness.
STANDARD:
Standardizes picture adjustments.
SOFT:
Softens contrast and sharpness.
• Pressing this button returns all the picture
settings in “MENU 4” to their default settings.
8
Remote control buttons and functions
DISPLAY button
PICTURE BOOSTER button
You can continuously display the current
channel number or VIDEO mode on the
screen.
When the picture is unclear because the
reception level of the TV signal is low,
activating the Picture Booster improves
the picture clarity in some situations.
Repeatedly press the PICTURE BOOSTER
button to select the desired mode.
Press this button.
To turn the display off, press this button
again.
• When selecting a VIDEO mode with no
signal, indication of the VIDEO mode
becomes fixed on the screen.
HIGH:
The Picture Booster is functioning at
maximum.
LOW:
The Picture Booster is functioning at
minimum.
MUTING button
You can turn the sound off instantly.
OFF:
Press this button.
The Picture Booster is off.
To turn the sound on, press this button
again.
• If the picture becomes abnormal when you
set the Picture Booster to HIGH, then set it to
LOW or OFF.
OFF TIMER button
You can set the TV to automatically turn
off after a set time.
Press this button to select the period of
time.
• You can set the period of time to a maximum
of 120 minutes in 10 miniute increments.
• 1 minute before the OFF TIMER function
turns off the TV, “GOOD NIGHT!” appears.
To display the remaining time, press this
button once.
To cancel the OFF TIMER function,
press this button to set the period of
time to “0”.
• The OFF TIMER function will not turn off the
TV’s main power.
9
Remote control buttons and functions
RETURN + button
CHANNEL SCAN button
You can set a channel you frequently view
to the Return Channel and you can view
that channel at any time with one-touch.
You can quickly view all TV channels
programmes that you can view on your
TV, and search for the programme you
want to view.
To set the channel to the Return
Channel:
1 Press this button to start scanning
TV channels.
1 Select the channel you want to set
to the Return Channel.
The TV channel programmes are each
displayed for several seconds.
2 Press this button and hold until the
message “RETURN PLUS
• The programmes of TV channels for
which the SKIP function is set to “YES”
are not displayed. (See page 16.)
PROGRAMMED!” appears.
• When you turn off the TV, the Return
Channel setting is canceled.
2 When you find the programme you
want to view, press this button
again to stop scanning.
To view the Return Channel:
Press this button.
• You can view two channels (current channel
and Return Channel) alternately by pressing
this button.
To cancel the Return Channel setting:
Press this button and hold until the
message “RETURN PLUS CANCELED!”
appears.
If no channel is set to the Return
Channel:
You can view the channel selected right
before the current channel by pressing
this button.
10
Using the TV’s menus
This TV has a number of functions you can operate using the menus. To use all your TV’s
functions fully, you need to understand how to use the menus.
3 Repeatedly press the
MENU T buttons to select
a desired function.
CHANNEL
RETURN+
- --
/
0
SCAN
DISPLAY
MUTING
DISPLAY
button
4 Press the MENU M buttons to
MENU
/
MENU
change function settings.
MENU –/+
buttons
buttons
Example:
CHANNEL
VOLUME
Changes the AUTO
SHUTOFF setting.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
OFF
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
OFF
OFF
ON
⇔
3 Basic operation
AI ECO DISPLAY
ON
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
1 Press the MENU T buttons.
One of the 4 menus is displayed.
• With some functions, the operation
method may differ.
MENU number
5 Press the DISPLAY button to
turn the display off.
MENU
1
TV
INPUT
The icon on
the left indicates
the currently
ON TIMER
PR 1 0:00
•To operate a menu using the buttons on
the front panel of the TV, refer to
“Operating menus” on page 18.
selected function.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Repeatedly press the
MENU T buttons to
display a desired menu.
• If you hold down the y button, the next
menu is displayed.
• If the selected function is on the first line,
pressing the r button displays the
preceding menu.
11
Using the TV’s menus
4 Press DISPLAY to turn the display
off.
INPUT
You can view images from VCRs or other
devices connected to your TV.
• If you turn off the TV’s main power by
pressing the Main power button, the ON
TIMER function is canceled.
1 Press MENU T to display the
“MENU 1” menu, then select
“INPUT”.
• If you do not turn off the TV after starting
the ON TIMER function, the channel will
automatically switch to the channel set for
the ON TIMER function.
MENU
1
TV
INPUT
ON TIMER
PR 1 0:00
When the time set for the ON TIMER
function is reached:
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
The TV automatically turns on and the
channel set for the ON TIMER function is
displayed.
• For safety reasons the TV will automatically
turn off if no operations are made within
approximately two hours after the TV is
turned on with the ON TIMER function.
2 Press MENU M to select the VIDEO
mode.
TV mode changes to VIDEO mode.
• The OFF TIMER function and AUTO
SHUTOFF function have priority over the ON
TIMER function.
ON TIMER
Your TV will automatically turn on and
tune into the channel you set after the
period of time you set.
1 Press MENU T to display the
“MENU 1” menu, then select
“ON TIMER”.
MENU
1
INPUT
ON TIMER
TV
Channel
No.
PR 1 0:00
OPERATE BY VOL-+
SELECT BY
PROGRAM BY -+
EXIT BY
DISPLAY
2 Press MENU M to select a channel
you want to view when the TV turns
on.
3 Press VOLUME M to select the
period of time after which you want
to turn on the TV.
The ON TIMER function starts.
• Each time you press the button, the period
of time changes in 15 minute intervals (up
to 12 hours).
To cancel the ON TIMER function,
press the VOLUME m button to set the
period of time to “0:00”.
12
Using the TV’s menus
AUTO SHUTOFF
BLUE BACK
You can set your TV to turn off if no
signals are received for about 15 minutes
or longer after the end of a broadcast.
If no signal is being received or the signal
is very weak, a blue screen automatically
becomes the picture background.
If you wish to continue viewing the poor
picture, you must set the BLUE BACK
function to “OFF”.
1 Press MENU T to display the
“MENU 2” menu, then select
“AUTO SHUTOFF”.
1 Press MENU T to display the
“MENU 2” menu, then select
“BLUE BACK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
AI ECO DISPLAY
ON
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
AI ECO DISPLAY
ON
2 Press MENU M to select “ON”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
To cancel the AUTO SHUTOFF function,
select “OFF”.
2 Press MENU M to select “ON”.
• The AUTO SHUTOFF function does not
turn off the TV’s main power.
To cancel the BLUE BACK function,
select “OFF”.
• The AUTO SHUTOFF will not work for a
VIDEO mode.
CHILD LOCK
You can disable the front control buttons
of the TV.
When this function is set to “ON”, the TV
can be operated using only the remote
control.
Use this function to prevent children from
operating the TV without parental consent.
1 Press MENU T to display the
“MENU 2” menu, then select
“CHILD LOCK”.
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
ON
ON
ON
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to select “ON”.
To cancel the CHILD LOCK function,
select “OFF”.
• The CHILD LOCK function is canceled
when you turn the power off.
13
Using the TV’s menus
AI ECO DISPLAY
AUTO CH PRESET
<AV-16N211 only>
You can automatically preset all TV
channels that can be received by your TV
to channels.
You can display on the screen the effect of
the AI ECO SENSOR function.
1 Press MENU T to display the
“MENU 3” menu, then select
“AUTO CH PRESET”.
1 Press MENU T to display the
“MENU 2” menu, then select
“AI ECO DISPLAY”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
MENU
AUTO SHUTOFF
CHILD LOCK
BLUE BACK
2
OFF
OFF
OFF
LANGUAGE
ENGLISH
AI ECO DISPLAY
ON
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M to start the AUTO
2 Press MENU M to select “ON”.
CH PRESET function.
The clover mark indicating the brightness of
your room is displayed for several seconds
each time the brightness changes. The
number of clover marks displayed on screen
increases as your room becomes darker.
“>>>ON SEARCH” is displayed on
the screen.
When all the TV channels that can be
received on your TV have been preset,
the display goes out and the AUTO CH
PRESET function operation is
completed.
To cancel the AI ECO DISPLAY
function, select “OFF”.
To stop the AUTO CH PRESET:
Press the MENU m buttons.
• The AUTO CH PRESET function does not
preset a TV channel to the AV channel
(channel number 0).
SETUP TOUR
You can start the SETUP TOUR function.
1 Press MENU T to display the
“MENU 3” menu, then select
“SETUP TOUR”.
• If the TV cannot preset the TV channel
you want to view, preset it manually. For
details, see “MANUAL CH PRESET” on
page 15.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
JVC logo is appear and the SETUP
TOUR function will start.
For details, see page 6.
14
Using the TV’s menus
If the picture is not clear:
Fine-tune the TV channel.
MANUAL CH PRESET
You can manually preset desired TV
channels to desired channels.
1
Press MENU t to select “FINE”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
NO
B/G
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
SELECT BY
PROGRAM BY -+
FINE
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
LANGUAGE
ENGLISH
2
Hold VOLUME m down to fine-tune
the TV channel so that the best image
is displayed on screen.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
“>” or “<” indicates that the TV is
fine-tuning the TV channel.
2 Press MENU M.
The sub-menu is displayed.
If the sound is not clear:
MANUAL
FINE
SKIP
NO
SOUND SYSTEM
EXIT
B/G
1
Press MENU t to select “SOUND
SYSTEM”.
SELECT BY
PROGRAM BY -+
SEARCH BY VOL-+ DISPLAY
PR 1 VL
EXIT BY
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
• The channel number is displayed as a PR
number. For example, channel 1 will be
displayed as PR 1. However, the AV
channel will be displayed as AV.
SELECT BY
PROGRAM BY -+
CHANGE BY VOL-+ DISPLAY
PR 3 VL
EXIT BY
2
Press VOLUME m to select the
appropriate sound system.
3 Press MENU M to select the
channel number.
•For the sound systems in each country
or region, refer to the table
“Broadcasting systems” on Back cover.
4 Press VOLUME M to start
searching for the TV channel.
“>>>” or “<<<” is displayed on the
screen.
5 Press MENU T to select
“MANUAL”.
When the TV finds a TV channel, the
“>>>” or “<<<” display goes out,
and the TV channel is preset to the
currently selected channel number.
6 Repeat steps 3 to 5 if you want to
preset another TV channel to a
channel.
• If the TV channel you want to preset is not
displayed, repeat step 4 until the TV finds
the TV channel you want to preset.
• To stop the MANUAL CH PRESET function,
press any button other than the VOLUME
m button.
15
Using the TV’s menus
SKIP
LANGUAGE
You can set undesired channels to be
skipped. Channels set to be skipped
cannot be selected by the CHANNEL m
buttons or the CHANNEL SCAN button.
• Channels to which TV channels have not
been preset are automatically set to be
skipped.
You can select the language for the on-
screen display.
1 Press MENU T to display the
“MENU 3” menu, then select
“LANGUAGE”.
MENU
AUTO CH PRESET
MANUAL CH PRESET
SETUP TOUR
3
1 Press MENU T to display the
“MENU 3” menu, then select
“MANUAL CH PRESET”.
LANGUAGE
ENGLISH
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
2 Press MENU M.
2 Press MENU M to select
The sub-menu is displayed.
language.
The on-screen display indications are
in the selected language.
3 Press MENU T to select “SKIP”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
Picture Adjustments
You can adjust the picture as you like.
SELECT BY
PROGRAM BY -+
YES/NO BY VOL-+ DISPLAY
PR 3 VL
EXIT BY
1 Press MENU T to display the
4 Press MENU M to select the
“MENU 4” menu.
channel you want to skip.
MENU
4
TINT
COLOUR
BRIGHT
CONT.
SHARP
5 Press VOLUME M to select “YES”.
The channel is set to be skipped.
To cancel the SKIP function, select
“NO”.
SELECT BY
OPERATE BY -+
EXIT BY
DISPLAY
6 Repeat steps 4 and 5 if you want to
set another channel to skip.
2 Press MENU T to select an item
and press MENU M to adjust it.
TINT*
n : Reddish + : Greenish
COLOUR
BRIGHT
CONT.
n : Lighter
n : Darker
n : Lower
n : Softer
+ : Deeper
+ : Brighter
+ : Higher
+ : Sharper
SHARP
*TINT (tint) is displayed only when
viewing images from NTSC3.58 or
NTSC4.43 colour systems.
16
TV buttons and parts
<AV-21Y211>
3
4
5
7 8 9
0
1
2
ON TIMER POWER
CHANNEL
VOLUME
EXIT
MENU
VIDEO
AUDIO
IN
<AV-16N211>
1
2
4
7
5
6
8
3
9
0
MENU
CHANNEL
VOLUME
EXIT
ON TIMER POWER
VIDEO
AUDIO
IN
7 Remote control sensor
8 ON TIMER lamp
The light is switched on while
ON TIMER function is operating.
9 POWER lamp
When the Main power is on,
the light is red.
0 Main power button
1Headphone jack
2VIDEO/AUDIO terminal
3 MENU buttons
• MENU button
• MENU m buttons
4 CHANNEL m buttons
5 VOLUME m buttons
6 AI ECO sensor
17
Using the buttons on the TV
Basic operation
Operating menus
Check to make sure the CHILD LOCK
function is set to “OFF”. When the CHILD
LOCK function is set to “ON”, the TV
cannot be operated using the front control
buttons. For details, see “CHILD LOCK” on
page 13.
You can operate functions in menus using
the front control buttons on the TV.
1 Press MENU y to display a menu.
2 Press MENU y repeatedly to display
the menu you want to use.
1 Press CHANNEL M to turn the TV
3 Press MENU y to select the desired
on from standby mode.
function or item.
2 Press CHANNEL M to select a
4 Press MENU M or VOLUME M to
carry out the desired operation.
For details, see the description for each
function.
channel.
3 Press VOLUME M to adjust the
volume.
5 Press VOLUME M to turn the menu
4 To turn your TV off, press the Main
power button to turn off the TV’s
main power.
display off.
To turn the sub-menu display off:
To change the TV mode to the VIDEO
mode:
• Press the TV/VIDEO button if the TV has one.
See page 7.
1
Press MENU y to select “EXIT”.
MANUAL
FINE
SKIP
SOUND SYSTEM
EXIT
NO
M
• If the TV has no TV/VIDEO button, select the
VIDEO mode with the INPUT function in
“MENU 1”.
SELECT BY
PROGRAM BY -+
EXIT
PR 3 VL
EXIT BY
BY VOL-+ DISPLAY
2
Press VOLUME m to turn the display
off.
18
Troubleshooting
If there is no picture or the TV does not operate normally, make sure the problem isn’t
due to the reasons indicated below.
If the problem persists even after taking the measures indicated, please contact a
service technician.
Cannot turn the TV on
Poor picture
• Press the Main power button on the TV.
• Connect the power cord to the AC outlet.
• Press the COLOUR SYSTEM button to select
another colour system. (see page 8.)
• Adjust the picture settings. (see page 16.)
• Set the Picture mode to STANDARD.
(see page 8.)
The screen turns blue
• Is the BLUE BACK function on?
(see page 13.)
• If noise (snow) totally blocks out the
picture, check the following.
- Have the TV and aerial been connected
properly?
Remote control inoperable
- Has the aerial cable been damaged?
- Is the aerial pointing in the right direction?
- Is the aerial itself faulty?
• Replace the batteries. (see page 3.)
Buttons on front of the TV do not
work
• If the TV or aerial suffer interference from
other equipment, stripes or noise may
appear in the picture. Move any equipment
which can cause interference away from the
TV.
• Switch the CHILD LOCK function off.
(see page 13.)
• If the TV or aerial suffer interference from
signals reflecting from mountains or
buildings, double-pictures (ghosting) will
occur. Change the aerial’s direction or
replace it with an aerial with better
directionality.
TV does not respond immediately
• Press the main power button on the TV to
turn off the main power. Press the main
power button again to turn on the TV. If the
TV returns to a normal state, operation is
normal.
• When a white and bright still image (such
as a white dress) is displayed on the screen,
the white part may look as if it is coloured.
When the image disappears from the screen,
the unnatural colours will also disappear.
The TV turns off suddenly
• Is the OFF TIMER function set to operate?
(see page 9.)
The TV turns on suddenly
• Is the AUTO SHUTOFF function on?
(see page 13.)
• Is the ON TIMER function set to operate?
(see page 12.)
• Have you not performed an operation for
about two hours after the TV was switched
on by the ON TIMER function?
(see page 12.) If you don’t perform an
operation within about two hours, the TV is
automatically switched off for safety.
The TV channel changes suddenly
• Is the ON TIMER function set to operate?
(see page 12.)
Poor sound
• Press the SOUND SYSTEM button to select
another sound system. (see page 8.)
19
Specifications
Model
AV-21Y211
AV-16N211
TV RF systems
Colour systems
B, G, I, D, K, M
PAL, SECAM, NTSC3.58 / 4.43 MHz
Channel and frequencies VHF low channel (VL)
VHF high channel (VH)
= 46.25 to 140.25 MHz
= 147.25 to 423.25 MHz
= 431.25 to 863.25 MHz
UHF channel (U)
Receives cable channels in mid band (X to Z, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41).
Power input
AC110 to 240V, 50 / 60 Hz
Power consumption
Maximum 90 W,
Average 60 W
Maximum 85 W,
Average 54 W
Screen size
(measured diagonally)
Picture tube 548 mm
Visible area 508 mm
Picture tube 423 mm
Visible area 380 mm
Audio output
5W
5W
(Rated power output)
Speakers
(6 cm x 12 cm) oval x 2
(5 cm x 9 cm) oval x 2
External input / output
INPUT:
VIDEO input (RCA), AUDIO input (RCA)
VIDEO output (RCA), AUDIO output (RCA)
stereo mini jack (3.5 mm diameter)
OUTPUT:
Headphone jack:
Dimensions (W x H x D) 649 mm x 470.5 mm x
477.5 mm
518 mm x 391.5 mm x
403 mm
Weight
21 kg
13 kg
Accessories
•
Remote control unit: RM-C375GY x 1 • Remote control unit: RM C367GY x 1
• AA / R6 / UM-3 dry cell battery x 2
• Matching aerial adapter x 1
• Rod aerial x 1
• AA / R6 / UM-3 dry cell battery x 2
• Matching aerial adapter x 1
• Rod aerial x 1
Design and specifications subject to change without notice.
Broadcasting systems
System
Area
Country or Region
Colour
Sound
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc.
Indonesia, Malaysia, Singapore, Thailand,
India, etc.
China, Vietnam, etc.
Hong Kong, etc.
PAL
B/G
Asia,
Middle
East
PAL
PAL
D/K
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc.
Russia, etc.
Czech Republic, Poland, etc.
Germany, Holland, Belgium, etc.
UK, etc.
SECAM
NTSC
SECAM
PAL
PAL
PAL
B/G
M
D/K
D/K
B/G
I
Europe
Oceania Australia, New Zealand, etc.
Republic of South Africa, etc.
PAL
PAL
B/G
I
Africa
Nigeria, etc.
Egypt, Morocco, etc.
PAL
SECAM
B/G
B/G
|