JVC Computer Accessories AAT100BT User Manual

English  
FCC INFORMATION  
Registering to a Bluetooth device – Pairing  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
Before pairing...  
2 Connect the unit to the dock  
Thank you for purchasing this JVC product. Before you begin operating this unit, please read  
the operating instructions carefully to be sure you get the best possible performance. If you have  
any questions, consult your JVC dealer.  
following two conditions:  
Turn off the iPod.  
connector on the bottom of the  
(1) This device may not cause harmful interference  
(2) This device must accept any interference received, including interference that  
may cause undesired operation.  
Place the target Bluetooth device within 1 m  
of the unit.  
iPod, then turn on the iPod.  
The unit automatically starts pairing and  
the LED indicator flashes rapidly. When  
the pairing is completed, flash will become  
slower after the pairing completed.  
CAUTION: Changes or modifications not approved by JVC could void user’s  
authority to operate the equipment.  
1 Turn on the target Bluetooth  
device and execute pairing  
operation on the device to find  
the unit.  
BLUETOOTH TRANSMITTER  
ÉMETTEUR BLUETOOTH  
TRANSMISOR BLUETOOTH  
CAUTION  
1. For your safety…  
Contact  
4. To protect the transmitter, DO NOT…  
allow them to get wet  
shake them or drop them against hard  
objects  
Address:  
JVC AMERICAS CORP.  
Never use the headphones when driving  
a car, motorcycle, or bicycle. This could  
result in an accident.  
JVC COMPANY OF AMERICA  
1700 Valley Road, Wayne, N.J. 07470  
Telephone: 1 (800) 252-5722  
Pay special attention to traffic around  
you when using the headphones outside.  
Failure to do so could result in an  
accident.  
Be careful not to turn up the sound  
volume too high. Your hearing can  
be damaged by listening to sounds at  
excessive volume for long periods.  
Do not disassemble or modify the  
transmitter.  
Do not allow flammable, water or  
metallic objects to enter the transmitter.  
In the dry air such as in winter, you  
may feel a static shock when using the  
transmitter.  
2. Avoid using the transmitter…  
in places subject to excessive humidity or  
dust  
insert forcibly when connecting the unit;  
otherwise the unit and the connected  
device may be damaged.  
The pass code* of the unit is set to “0000.” If the pass code of the target Bluetooth device is  
other than “0000,” you cannot execute pairing. When the target device requests the pass code  
during pairing operation, enter “0000.”  
Note: This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the  
instructions, it may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
AA-T100BT -J/C  
apply excessive force to the unit when  
connected; otherwise the unit and the  
connected device may be damaged.  
touch the terminals of the unit and the  
connected device or contact metallic  
object to them; otherwise damage or  
malfunction may be caused with poor  
contact or a static shock.  
* also called as “pass key,” “PIN number,” etc.  
The pairing mode will be canceled about in 60 seconds. In this case, turn off the iPod and  
disconnect the unit, and then perform the pairing operation again.  
Listening to Music  
5. About iPod…  
Preparation:  
If the iPod does not play correctly, please  
update your iPod software to the latest  
version. For details about updating your  
iPod, check on the Apple web site.  
<http://www.apple.com>  
3 Start playback of the iPod.  
Refer to the iPod’s instruction manual for  
the operation of the iPod.  
Reorient or relocate the receiving antenna.  
Finish pairing between the unit and the  
Bluetooth device.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
If the target Bluetooth device supports  
the AVRCP of the Bluetooth Profile,  
play, pause and skip (forward/reverse)  
functions are available from the target  
Bluetooth device.  
1 Turn on the Bluetooth device.  
Sound distortion may occur when playing  
back audio source with high recording  
levels. When distortion occurs, it is  
recommended to turn off the equalizer of  
the iPod. For information on operating  
the iPod, see the iPod instruction manual.  
JVC is not responsible for any loss of or  
damage to iPod that might result from  
the use of this product.  
Consult the dealer or an experienced radio/TV technician for help.  
2 Connect the unit to the dock  
connector on the bottom of the  
iPod, then turn on the iPod.  
The unit automatically turns on and will  
connect to the target Bluetooth device.  
in places subject to extremely high (over  
40°C or 104°F) or low (under 0°C or  
32°F) temperatures  
IC INFORMATION  
3. DO NOT leave the transmitter…  
exposed to direct sunlight  
near a heater  
To stop using the unit,  
Turn off the iPod and pull off the unit straight  
from the iPod.  
This device complies with RSS-210 of the IC Rules. Operation is subject to the  
following two conditions:  
If the connection is not completed within  
five minutes, the unit automatically turns  
off. In this case, turn off the iPod and  
disconnect the unit, and then repeat the  
procedure from step 1.  
(1) This device may not cause harmful interference  
(2) This device must accept any interference received, including interference that  
may cause undesired operation of the device.  
CAUTION: Changes or modifications not approved by JVC could void user’s  
authority to operate the equipment.  
About Bluetooth  
Contact  
Address:  
JVC CANADA INC.  
LED flashing patterns  
Cautions on Bluetooth  
communication  
INSTRUCTIONS  
21 Finchdene Square, Toronto, ON M1X 1A7  
Telephone: (416) 293-1311  
Status  
LED  
Flashing pattern  
MANUEL D’INSTRUCTIONS  
Microwaves emitted from Bluetooth devices  
may affect the operation of electronic  
medical devices. Turn off this unit and other  
Bluetooth devices in hospitals, airplanes,  
trains, or crowding places.  
Bluetooth devices use 2.4 GHz band, which  
is the same as that used by wireless LAN  
devices and microwave oven. Interference  
may occur near these devices and cause  
noise, disconnectivity, or a decrease of  
communication speed.  
Connection with all Bluetooth devices cannot  
be guaranteed. Connectivity, operation,  
display indication or function may differ  
depending on the characteristics and  
specification of the devices.  
Some Bluetooth devices take more time to  
establish connection.  
Pairing  
Blue  
Blue  
Blue  
Blue  
-------------  
----------------------------  
--------------------------------  
--------------------------------------  
Bluetooth is a short-range wireless radio  
communication technology for the mobile  
device such as cellular phones, portable PCs,  
and other devices. The Bluetooth devices can  
be connected without cables and communicate  
each other.  
Note: This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Industry Canada’s RSS-210. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with the  
instructions, it may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
MANUAL DE INSTRUCCIONES  
Waiting connection  
Last device connecting  
Communicating  
About Bluetooth Profile  
Bluetooth Profile designates the way of  
communication between Bluetooth devices.  
The system supports the following Bluetooth  
Profiles.  
A2DP: Advanced Audio Distribution Profile  
The profile controls sending/receiving the high-  
quality audio contents.  
Troubleshooting  
What appears to be trouble is not always  
serious. Check the following points before  
consult your JVC dealer.  
The sound may be intermittent in the  
following cases. Avoid the following  
conditions when you use this unit.  
Places where the wireless local area  
network is applied.  
Reorient or relocate the receiving antenna.  
Cannot pair the devices.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
You cannot pair the Bluetooth device having  
sending function only.  
Near the microwave oven.  
Near the other Bluetooth devices.  
Places where the radiowave is used.  
AVRCP: Audio/Video Remote Control Profile  
The profile controls the functions of audio/  
video devices such as playing, stopping, pausing  
Bring the devices as closer as possible.  
Cannot connect the devices.  
No sound.  
Consult the dealer or an experienced radio/TV technician for help.  
To use the Bluetooth functions, the Bluetooth  
devices are required to be compatible with  
the same Bluetooth profiles as this unit is.  
However, the functions may not be available  
depending on the specifications of the  
Bluetooth device even when it is compatible  
with the same profiles.  
Pairing is incomplete. Perform the pairing  
again.  
The connection between the Bluetooth device  
and this unit is incomplete. Connect the  
devices again.  
and volume control.  
The sound is intermittent/The  
communication range is small.  
Although Bluetooth® wireless technology  
can transmit the contents within the range  
of approx. 10 m, obstacles (human bodies,  
metallic objects, wall, etc.) or radiowave  
condition may affect the sound and decrease  
its range.  
INFORMATION SUR IC  
About pairing  
Pairing creates a unique and encrypted link  
between two Bluetooth devices and lets them  
communicate with each other. Bluetooth devices  
will not work if the devices have not been paired.  
Cet appareil est conforme à la RSS-210 du réglement de la IC. Le fonctionnement  
est sujet aux deux conditions suivantes:  
(1) Cet appareil ne peut causer d’interférences nuisi-bles  
(2) Cet appareil reçoit toute interférence même les interférences qui peuvent  
occasioner un mauvais fonctionnement.  
ATTENTION: Les changements ou les modifications non approuvés par JVC  
risquent de retirer à l’utilisateur le droit d’utiliser l’appareil.  
Contact  
Features  
Printed in China  
LNT0097-001A  
This unit is a stereo transmitter using Bluetooth® wireless technology.  
© 2007 Victor Company of Japan, Limited  
ENGLISH  
Adresse:  
JVC CANADA INC.  
Compatible iPods  
Music  
Designs and specifications are subject to change without notice.  
21 Finchdene Square, Toronto, ON M1X 1A7  
iPod (with click wheel, with color  
display, with video)  
Specifications  
Téléphone: (416) 293-1311  
Power supply:  
Compatible iPods:  
This product’s performance would be degraded under a strong electro-static  
environment. And the function would be self-recoverable after the above case.  
This product’s performance would be degraded since the disturbance from the mains  
cord. And the function would be self-recoverable after the above case.  
iPod classic  
supplied from iPod  
Battery life**:  
iPod (with click wheel, with color display, with  
video), iPod classic, iPod touch, iPod mini, iPod  
nano (1st, 2nd, 3rd generation)  
Bluetooth version:  
Control  
iPod touch  
Remarque: L’appareil a été testé et jugé conforme aux limites des appareils  
numériques de classe B, aux termes de la réglementation RSS-210 de l’industrie  
du Canada. Ces limites ont pour but d’assurer une protection raisonnable contre  
les interférences parasites lorsque l’appareil est utilisé dans une installation  
résidentielle. Cet appareil engendre, utilise et peut émettre une énergie  
radioélectrique et, s’il n’est pas installé et utilisé en stricte conformité avec ces  
instructions, il peut provoquer des interférences parasites dans les liaisons  
radiophoniques. Ceci ne garantit pas pour autant qu’une installation particulière  
n’émettra aucune interférence. Si l’appareil engendre des interférences parasites  
avec la réception radio ou télévision, ce qui pourra être déterminé en éteignant  
puis en rallumant l’appareil, il est conseillé à l’utilisateur d’essayer de corriger les  
interférences en prenant l’une des mesures ci-dessous:  
Bluetooth receiver with  
iPod mini  
up to 6 hours (iPod nano 2nd generation)  
** Depends on use or the type of the iPod  
connected  
audio streaming function  
iPod nano (1st, 2nd, 3rd generation)  
with iPod  
Do not connect the unit to devices  
other than above. Otherwise,  
malfunctions may occur on the unit or  
the devices.  
This unit does not support iPod 3rd  
generation or earlier.  
FRANÇAIS  
Bluetooth 2.0 certified  
Connection with all Bluetooth devices cannot be  
Mass:  
6 g (0.21 oz.)  
Les performances de ce produit se détérioreront dans un environnement fortement  
électro-statique. Par ailleurs, le fonctionnement se restaurera de lui-même dans le  
cas ci-dessus.  
Output power:  
guaranteed.  
Bluetooth power class 2  
Optional (not included) Bluetooth  
Stereo Headset  
Service area:  
iPod is a trademark of Apple Inc., registered  
in the U.S. and other countries.  
max. 10 m (10.9 yd.)*  
Les performances de ce produit se détérioreront en cas de perturbations du cordon  
d’alimentation. Par ailleurs, le fonctionnement se restaurera de lui-même dans le cas  
ci-dessus.  
HA-W700BT  
*
Communication range may vary depending  
on the environmental conditions.  
The Bluetooth® word mark and logos are  
registered trademarks owned by Bluetooth  
SIG, Inc. and any use of such marks by Victor  
Company of Japan, Limited (JVC) is under  
license. Other trademarks and trade names  
are those of their respective owners.  
Frequency band:  
2.4 GHz (2.4000 GHz - 2.4835 GHz)  
Bluetooth profile:  
ESPAÑOL  
Parts name  
El rendimiento de este producto puede deteriorarse en un entorno con campos  
electrostáticos fuertes. El funcionamiento se repondrá a la normalidad después del  
caso arriba mencionado.  
iPod Connection  
terminal  
Modifier l’orientation ou changer l’emplacement de l’antenne de réception.  
Eloigner davantage l’appareil du récepteur.  
A2DP (Advanced Audio Distribution Profile)  
AVRCP (Audio/Video Remote Control Profile)  
Supported Codec:  
Brancher l’appareil dans une prise d’un circuit différent de celui auquel le  
récepteur est raccordé.  
El rendimiento de este producto puede deteriorarse debido a las perturbaciones del  
cable de la red eléctrica. El funcionamiento se repondrá a la normalidad después del  
caso arriba mencionado.  
LED indicator  
SBC (Subband Codec)  
Demander l’aide de son agent ou d’un technicien radio/télévision qualifié.  
 

Infinite Peripherals Printer PP 55 User Manual
InFocus Home Theater System IN5120 User Manual
Insignia Car Satellite TV System NS 24E40SNA14 User Manual
Intel Computer Hardware S3200SH User Manual
JAMO DVD Player DMR 70 User Manual
Jensen Car Stereo System VM9414 User Manual
JVC Computer Monitor DT V17G1 User Manual
Kenmore Freezer 20938 User Manual
Kenwood Marine Radio TM642A User Manual
King Canada Lathe KC 1440ML 6 User Manual