JVC DVD Player 0105MOC MW SC User Manual

CAUTION:  
To prevent malfunction of the player  
• There are no user-serviceable parts inside. If  
anything goes wrong, unplug the power cord and  
consult your dealer.  
• Do not insert any metallic objects, such as wires,  
hairpins, coins, etc. into the player.  
• Do not block the vents. Blocking the vents may  
damage the player.  
Connections  
Before making connections:  
• Do not connect the AC power cord until all other connections have been made.  
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the  
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.  
DVD PLAYER  
XV-N320B  
XV-N322S  
Warnings, Cautions and Others  
• Do not block the ventilation openings or holes. (If the  
ventilation openings or holes are blocked by a newspaper  
or cloth, etc., the heat may not be able to get out.)  
• Do not place any naked flame sources, such as  
lighted candles, on the apparatus.  
• When discarding batteries, environmental problems  
must be considered and local rules or laws governing  
the disposal of these batteries must be followed strictly.  
• Do not expose this apparatus to rain, moisture, dripping  
or splashing and that no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
Connecting to a TV with component jacks  
Connecting to a stereo audio amplifier (receiver)  
PB  
RIGHT  
Y
PB  
RIGHT  
Y
XIAL  
LEFT  
VIDEO  
PR  
LEFT  
TREAM  
L OUT  
AUDIO OUT  
VIDEO OUT  
INSTRUCTIONS  
Connecting to a TV with SCART connector  
VO  
PR  
AUDIO OUT  
VEO OUT  
To analog  
To analog audio input  
To clean the cabinet  
®
NOTE  
audio input  
• Use a soft cloth. Follow the relevant instructions on  
the use of chemically-coated cloths.  
• Do not use benzene, thinner or other organic solvents  
and disinfectants. These may cause deformation or  
discoloring.  
TV  
The VIDEO jack, AV OUT terminal, and  
component (Y,PB, PR) jacks cannot be  
used at the same time.  
SCART cable  
(not supplied)  
Connecting to a digital audio device  
V I D E O  
IN  
To enjoy high-quality surround sound, connect the  
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS  
decoder or an amplifier with a built-in decoder.  
IN  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire and to protect  
from damage, locate the apparatus as follows:  
To component  
video input  
S-VIDEO  
VIDEO  
PB  
GNT0059-004A[EK]  
0105MOC-MW-SC  
©2005 Victor Company of Japan, Limited  
RIGHT  
Y
COAXIAL  
To switch the scanning mode between Progressive and  
Interlace, press and hold VFP-I/P on the remote control  
for a few seconds.  
Front:  
No obstructions and open spacing.  
EN  
Playable discs  
• DVD VIDEO, Audio CD, Video CD, SVCD  
Sides: No obstructions in 3 cm from the sides.  
LEFT  
PCM/STREAM  
DIGITAL OUT  
L
EF  
T
VIDEO  
PR  
Top:  
Back:  
No obstructions in 5 cm from the top.  
No obstructions in 15 cm from the back.  
A
AUDIO OUT  
VIDEO OUT  
UDIO  
Region code of DVD VIDEO  
R
IGH  
T
NOTES  
To analog  
audio input  
This player can play back DVD VIDEO discs  
whose region code numbers include “2.”  
Examples of playable DVD VIDEO discs:  
Bottom: No obstructions, place on the level surface.  
• Connect to a TV with composite jacks and set  
[CONNECTIONS] to [VIDEO COMPONENT] before  
connecting with component jacks. (See  
“CONNECTIONS” in “Initial settings.”)  
• Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)”  
correctly.  
V I D E O  
Spacing 15 cm or more  
• DVD-R/-RW written in the DVD VIDEO format  
• CD-R/RW written in the SVCD, Video CD or Audio CD  
format  
• CD-R/RW written in MP3/JPEG in accordance with  
the “ISO 9660” format  
XV-N320B/XV-N322S  
AV OUT  
1 2  
3 4  
1 2 3  
4 5 6  
To digital audio input  
Front  
ALL  
2 5  
2
The player  
Wall or  
obstructions  
NOTES  
• The VIDEO jack, AV OUT terminal, and component  
(Y,PB, PR) jacks cannot be used at the same time.  
The player’s region code is printed on the rear of  
the player  
Note of Color system format  
This player accommodates the PAL system, and  
also can play back discs recorded with NTSC  
system. (NTSC video signals are converted to an  
PAL signal and output.)  
• Depending on the disc, no signal may be outputted  
from the DIGITAL OUT. Make an analog connection  
in this case.  
• Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]  
preference display correctly according to the  
connected digital audio equipment. (See “DIGITAL  
AUDIO OUTPUT” in “Initial settings.”)  
Supported Digital audio formats:  
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital  
Theater Systems)*  
Stand height  
5 cm or more  
Floor  
About the scanning mode indicator  
[PICTURE SOURCE] of  
the PICTURE menu  
Source type of DVD VIDEO  
NOTES  
Connecting to a TV with composite jacks  
Film source  
[DDP]  
Video source  
[P]  
CAUTION  
• If a disc gets dirty, scratched or warped, or due to the  
disc characteristics or recording conditions, the  
player may not be able to play back such discs.  
• The player can play back audio signals recorded in  
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.  
• With some discs, operations may not be possible.  
* To play back DTS-encoded DVD VIDEO or DTS-  
encoded Audio CD discs correctly, connect the  
player to an amplifier with a built-in DTS decoder.  
Otherwise, playback sound will be distorted.  
AUTO  
FILM  
To reduce the risk of electrical shocks, fire, etc.:  
1. Do not remove screws, covers or cabinet.  
2. Do not expose this appliance to rain or moisture.  
TV  
Precautions  
NOTES  
[DDP]  
[DDP]  
Notes on the power cord  
• If your TV has a monaural audio input  
instead of stereo, use an optional audio  
cable which converts stereo audio  
output to monaural.  
VIDEO(NORMAL)/  
(ACTIVE)  
[P]  
[P]  
Supplied accessories  
IN  
• When you are away on travel or otherwise for an extended  
period of time, remove the plug from the wall outlet. A  
small amount of power (1.0 W) is always consumed while  
the power cord is connected to the wall outlet.  
• When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
• Do not handle the power cord with wet hands!  
• Disconnect the power cord before cleaning the  
player or moving the player.  
• Do not alter, twist or pull the power cord, or put  
anything heavy on it, which may cause fire, electric  
shock, or other accidents.  
• If the cord is damaged, consult a dealer and have the  
power cord replaced with a new one.  
Avoid moisture, water, dust, and high temperatures  
• Do not place the player in moist or dusty places.  
• If water gets inside the player, turn off the power and  
remove the plug from the wall outlet, then consult  
your dealer. Using the player in this state may cause  
a fire or electrical shock.  
• Do not expose the player to direct sunlight or place it  
near a heating device.  
Notes on installation  
If anything is missing, consult your dealer  
immediately.  
VIDEO  
NOTE  
Caution ––  
Disconnect the mains plug to shut the power off  
completely. The STANDBY/ON button in any  
STANDBY/ON button!  
Some progressive TV and High-Definition TV sets are  
not fully compatible with the player. To check the  
compatibility of your TV, contact your local JVC  
customer service center.  
• Remote control (x 1)  
LEF  
T
• The VIDEO jack, AV OUT terminal, and  
component (Y,PB, PR) jacks cannot be  
used at the same time.  
• R6(SUM-3)/AA(15F) battery (x 2)  
AU  
DIO  
RIG  
position does not disconnect the mains line. The power  
can be remote controlled.  
H
T
Unplayable discs  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
If you try to play back discs listed below, noise may be  
generated and causes damage to speakers.  
• DVD-RW written in the VR format  
• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,  
PHOTO CD, SACD  
COAXIAL  
2. CAUTION: Do not open the top cover. There are no  
user serviceable parts inside the unit; leave all  
servicing to qualified service personnel.  
3. CAUTION: Visible and invisible laser radiation when  
open and interlock failed or defeated. Avoid direct  
exposure to beam.  
PR  
PCM/STREAM  
DIGITAL OUT  
Yellow  
RIGHT  
VID
LEFT  
VDEO OPUBT  
• Unfinalized discs  
Audio/video cable  
(not supplied)  
AUDIO OUT  
• Discs of irregular shape or discs with tape, seals or  
paste on either the label side or playback side.  
Playing back these discs may damage the player.  
The player  
4. REPRODUCTION OF LABEL: CAUTION LABEL,  
PLACED INSIDE THE UNIT.  
White  
The Non-DVD side of a “DualDisc” does not comply with  
the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
Red  
• Select a place which is level, dry and neither too hot  
nor too cold between 5˚C and 35˚C.  
• Leave sufficient distance between the player and the TV.  
• Do not install the player in a place subject to vibrations.  
• Do not put heavy objects on the player.  
1
2
3
4
Turning on the power  
Initial setup  
Basic Operations  
Advanced Operations  
When you turn on the player for the first time after  
purchase, the following message appears on the TV  
screen.  
Changing the language, sound  
Changing the picture tone (VFP)  
Turning on and off the player  
Inserting the AC power plug  
Changing the display window  
contents  
and scene angle  
After all other connections have been made, insert the  
AC power plug to the wall outlet firmly.  
Insert a disc  
The VFP (Video Fine Processor)  
function allows you to adjust the  
picture character according to the  
type of programming, picture tone or  
personal preferences.  
STANDBY/ON  
OPEN/  
CLOSE  
1 Press the button.  
Each time you press DISPLAY,  
the display window contents  
changes.  
Open/close the disc tray  
Basic playback  
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO  
SETTING  
YES - PRESS ENTER NO - PRESS CANCEL  
1 Press 0 to open the disc tray.  
STANDBY/ON  
OPEN/  
CLOSE  
2 Press the button repeatedly or  
2 Place a disc in the disc tray.  
• To insert an 8-cm disc, place it in the inner  
recess.  
3 Press 0 to close the disc tray.  
+
SLOW  
DISPLAY ON SCREEN  
Turning on and off the player  
Installing the batteries in the remote control  
Open the compartment cover, and place the two  
supplied R6(SUM-3)/AA(15F) batteries in the remote  
control according to the polarity markings (“+” and “–”)  
inside the compartment. Then replace the cover.  
5/to select the desired item.  
3 Press ENTER to finish the  
setting.  
+
SLOW  
DISPLAY ON SCREEN  
TOP  
MENU  
THUMBNAIL/  
LIST  
Before enjoying this player, make the initial settings as  
follows:  
Buttons To do  
1 Press VFP-I/P.  
TOP  
MENU  
THUMBNAIL/  
LIST  
Locating the beginning of a scene  
or song  
2 Press 2/3 to select the desired  
Buttons  
To do  
3*  
7
Start/resume normal Playback  
ENTER  
1 Press ENTER.  
preset.  
You can select a title/chapter/  
track directly and start playback.  
For DVD Video:  
(While stopped) select title.  
(While playing back) select  
chapter.  
ENTER  
AUDIO  
For DVD Video:  
select audio languages.  
For SVCD/VCD:  
select the audio  
channel.  
Stop  
DVD PLAYER SETUP  
MENU  
SET UP  
NEXT  
Selected  
Preset  
• When RESUME is ON or DISC  
RESUME, this player  
memorizes the position on the  
disc where you interrupted  
playback.  
USER 1  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
PREVIOUS SELECT  
MENU  
SET UP  
NEXT  
GAMMA  
MID  
PREVIOUS SELECT  
BRIGHTNESS  
CONTRAST  
+
4
CLEAR  
+10  
ON SCREEN LANGUAGE  
ENGLISH  
CLEAR  
ENGLISH  
SUBTITLE select the subtitle.  
ANGLE select the view-angle.  
SATURATION +10  
FRENCH  
GERMAN  
1
4
2
5
8
0
3
6
For SVCD/VCD/CD:  
Select track.  
– To resume playback, press 3.  
– To stop playback completely,  
press 7 again.  
TINT  
+10  
1
4
2
5
8
0
3
6
SHARPNESS  
Y DELAY  
LOW  
2 Press 5/to select the on-screen language for  
To select 5: press 5.  
+
2
7
9
the preference displays, etc., then press ENTER.  
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
• If you press TITLE/GROUP  
before entering the number, you  
can select the title instead of the  
chapter.  
8*  
Pause  
CANCEL  
RETURN  
7
9
Parameter  
Changing the Sound Field  
• Each time you press the button,  
the still picture advances to the  
next frame.  
DVD PLAYER SETUP  
CANCEL  
RETURN  
NORMAL For watching TV in a  
TITLE/  
GROUP  
SOUND  
EFFECT  
Each time you press SOUND  
EFFECT, the Sound Effect mode  
changes.  
• As the value becomes bigger, the  
Sound Effect works stronger.  
MONITOR TYPE  
PICTURE SOURCE  
SCREEN SAVER  
CONNECTIONS  
BACKGROUND  
4:3 L.B.  
16:9  
4:3 LB  
VFP DIMMER  
I/P  
general room.  
TITLE/  
GROUP  
SOUND  
EFFECT  
VFP DIMMER  
I/P  
4:3 PS  
¡/1 Fast forward/backward  
(While paused)  
CINEMA For watching a movie  
software in a room with  
suppressed light.  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
SCART RGB  
STANDARD  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
Slow-motion playback  
The batteries will last about six months with normal use.  
If the functions of the remote control become erratic,  
replace the batteries.  
Using the disc menu  
• Each time you press the button,  
With the label side up  
USER1  
USER2  
You can adjust  
the playback speed changes.  
You can operate a disc—SVCD/  
VCD with Playback Control*  
(PBC)—using the disc menu  
shown on the TV screen.  
* A method of controlling disc play  
for SVCD/VCD by using the disc  
menu.  
parameters that affect the  
picture character and  
store the settings as a user  
preset. See below.  
3 Press 5/to select the monitor type, then press  
ENTER.  
¢/4 Skip chapter/track  
Precautions of the safe use of batteries  
Observe the following precautions for the safe use of  
batteries. If they are used improperly their lives will be  
shortened, they may burst or their contents may leak.  
• Remove the batteries from the remote control if it is  
not going to be used for a long period of time.  
• Remove dead batteries and dispose of them  
properly.  
• Never leave dead batteries lying around, take them  
apart, mix them with other refuse, or throw them into  
an incinerator.  
• Never touch liquid that has leaked out of a battery.  
• Do not mix new and old batteries, or batteries of  
different types, when placing them.  
• If you press and hold the button  
during playback, playback is  
advanced/reversed at 5 times  
normal speed.  
• For a normal (conventional) TV, select “4:3 LB” or  
“4:3 PS.(See “MONITOR TYPE” in “Initial  
settings.”)  
Zooming the picture  
To adjust the picture tone  
Each time you press ZOOM, the  
magnification changes.  
Point toward the remote sensor directly as  
possible (the operating range is approx. 5 m.)  
• For a wide-screen TV, select “16:9.”  
1 Select “USER1” or “USER2.”  
2 Press 5/to select a parameter, then press ENTER.  
VARIABLE (For DVD Video)  
DVD PLAYER SETUP  
• You can use 5//2/3 button to  
7 For DVD  
PLAYBACK The disc is played back at about  
1.2 or 1.5 times (FAST)/0.8 or 0.6  
times (SLOW) normal speed.  
DIGITAL AUDIO OUTPUT  
DOLBY DIGITAL/PCM  
move the zoomed position.  
PCM ONLY  
1 Press TOP MENU or MENU to show the disc menu.  
2 Press 5//2/3 to select a desired item, then press  
ANALOG DOWNMIX  
D.RANGE CONTROL  
OUTPUT LEVEL  
About On-screen guide icons  
GAMMA  
Adjust this if the neutral color is bright or dark.  
The brightness of dark and bright portion is  
maintained (LOW/MID/HIGH).  
DOLBY DIGITAL/PCM  
To return to the normal playback,  
select the normal size by pressing  
ZOOM repeatedly.  
STREAM/PCM  
: Playback.  
STANDARD  
ENTER or 3 (SELECT).  
The sound is not muted, and the  
subtitle does not go off (except for  
DTS).  
• With some discs, you can also select items by entering the  
number using the numeric buttons.  
: Pause.  
BRIGHTNESS Adjust this if the picture is bright or dark on the  
whole (–16 (darkest) to +16 (brightest)).  
/
: Slow-motion playback with the current  
speed.  
Main display  
7 For SVCD/VCD  
(For SVCD/VCD)  
4 Press 5/to select a desired digital output  
signal type, then press ENTER.  
• Each indicator lights up when corresponding  
function/mode is activated, or corresponding  
information is on the main display.  
CONTRAST  
Adjust this if the far and near position is unnatural  
(–12 to +12).  
The disc is played back at about  
2 times (FAST)/0.5 times (SLOW)  
normal speed.  
1 While stopped, press TOP MENU or 3 (SELECT) to  
show the menu.  
/
: Fast forward/backward playback with  
the current speed.  
Set this item correctly according to the logo on your  
receiver or decoder.  
(If you do not connect the player to such a device,  
press ENTER to finish the setting.)  
• Receiver/decoder bearing Dolby Digital logo and  
no DTS, select “DOLBY DIGITAL/PCM.”  
• Receiver/decoder bearing both Dolby Digital and  
DTS logos, select “STREAM/PCM.”  
• Receiver/decoder bearing neither Dolby Digital nor  
DTS logo, or digital recorder, select “PCM ONLY.”  
2 Press the numeric buttons to select a desired item.  
To select 5: press 5.  
Turning on and off the player  
SATURATION Adjust this if the picture is whitish or blackish  
Press  
STANDBY/ON.  
(–16 (blackest) to +16 (whitest)).  
(Only for DVD Video)  
: At the beginning of a scene containing  
multi-angle views.  
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
The playback position moves  
back 10 seconds before the  
current position (only within the  
same title).  
TINT  
Adjust this if the appearance of flesh tone is  
unnatural (–16 to +16).  
• To move to the next or previous page of the current menu,  
press ¢ or 4.  
: At the beginning of a scene containing  
multi-audio sounds.  
SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH).  
• To return to the previous menu, press RETURN.  
: At the beginning of a scene containing  
multi-subtitles.  
You can change the setting so that the on-screen  
guide icons do not appear on the TV screen. (See  
“ON SCREEN GUIDE” in “Initial settings.”)  
* 38 on the player starts/pauses playback.  
Y DELAY  
Adjust this if the picture looks separately/  
overlapped (–2 to +2).  
To play back without PBC  
While stopped, press the numeric buttons instead of 3  
(SELECT) to start playback.  
To reactivate PBC  
Changing the display brightness  
3 Press 5/to adjust the parameter, then press ENTER.  
4 Repeat step 2 and 3 to adjust other parameters.  
5 Press VFP-I/P to finish the setting.  
To bring up the DVD PLAYER SETUP display later  
Press SET UP for a few seconds until the DVD PLAYER  
SETUP display appears.  
Press DIMMER to change the brightness of  
the display window.  
• Press TOP MENU or MENU.  
• Press 7 to stop playback, then 3 (SELECT).  
5
6
7
8
 

Indesit Cooktop K 601 VC G User Manual
Insignia CRT Television NS 39D310NA15 User Manual
Jensen Flat Panel Television JE1507 User Manual
John Lewis Smoke Alarm SCO5JL User Manual
Kambrook Electric Heater KCE30 User Manual
Kenwood CD Player KDC 202U User Manual
Keys Fitness Fitness Equipment ST DB4 User Manual
Keys Fitness Home Gym 920R User Manual
KitchenAid Mixer 4KHM7TAC5 User Manual
KitchenAid Refrigerator W10303987A User Manual