JVC DVD Player XV N330B User Manual

CAUTION:  
To prevent malfunction of the player  
Connections  
Before making connections:  
• Do not connect the AC power cord until all other connections have been made.  
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the  
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.  
DVD PLAYER  
XV-N330B  
XV-N332S  
Warnings, Cautions and Others  
•Do not block the ventilation openings or holes. (If the •There are no user-serviceable parts inside. If  
ventilation openings or holes are blocked by a newspaper  
or cloth, etc., the heat may not be able to get out.)  
•Do not place any open flame sources, such as lightedDo not insert any metallic objects, such as wires,  
candles, on the apparatus.  
•When discarding batteries, environmental problems  
must be considered and local rules or laws governing  
the disposal of these batteries must be followed strictly.  
•Do not expose this apparatus to rain, moisture, dripping  
or splashing and that no objects filled with liquids, such  
as vases, shall be placed on the apparatus.  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire and to protect  
from damage, locate the apparatus as follows:  
anything goes wrong, unplug the power cord and  
consult your dealer.  
Connecting to a TV with component jacks  
Connecting to a stereo audio amplifier (receiver)  
PB  
LEFT  
Y
PB  
LEFT  
Y
XIAL  
hairpins, coins, etc. into the player.  
•Do not block the vents. Blocking the vents may  
damage the player.  
RIGHT  
VIDEO  
VIDEO OUT  
PR  
RIGHT  
TREAM  
L OUT  
AUDIO OUT  
INSTRUCTIONS  
Connecting to a TV with SCART connector  
VIDEO  
VIDEO OUT  
PR  
AUDIO OUT  
To analog  
To analog audio input  
To clean the cabinet  
®
NOTE  
audio input  
•Use a soft cloth. Follow the relevant instructions on  
the use of chemically-coated cloths.  
•Do not use benzene, thinner or other organic solvents  
and disinfectants. These may cause deformation or  
discoloring.  
TV  
The VIDEO jack, AV OUT terminal, and  
component (Y, PB, PR) jacks cannot be  
used at the same time.  
SCART cable  
(not supplied)  
Connecting to a digital audio device  
V I D E O  
IN  
To enjoy high-quality surround sound, connect the  
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS  
decoder or an amplifier with a built-in decoder.  
IN  
To component  
video input  
S-VIDEO  
GNT0068-005A[EK]  
0206KTC-MW-SC  
©2006 Victor Company of Japan, Limited  
PB  
VIDE  
O
LEFT  
Y
COAXIAL  
To switch the scanning mode between Progressive and  
Interlace, press and hold VFP-I/P on the remote control  
for a few seconds.  
Front:  
No obstructions and open spacing.  
EN  
Playable discs  
• DVD VIDEO, Audio CD, Video CD, SVCD  
Sides: No obstructions in 3 cm from the sides.  
RIGHT  
PCM/STREAM  
DIGITAL OUT  
L
EF  
T
VIDEO  
VIDEO OUT  
PR  
Top:  
Back:  
No obstructions in 5 cm from the top.  
No obstructions in 15 cm from the back.  
A
AUDIO OUT  
UDI  
O
Region code of DVD VIDEO  
This player can play back DVD VIDEO discs  
whose region code numbers include “2.”  
Examples of playable DVD VIDEO discs:  
R
IGH  
T
NOTES  
To analog  
Bottom: No obstructions, place on the level surface.  
•Connect to a TV with composite jacks and set  
[CONNECTIONS] to [VIDEO COMPONENT] before  
connecting with component jacks. (See  
“CONNECTIONS” in “Initial settings.”)  
•Connect “Y” to “Y,”“PB” to “PB(CB),”“PR” to “PR(CR)”  
correctly.  
V I D E O  
audio input  
Spacing 15 cm or more  
•DVD-R/-RW, +R/+RW written and finalized in the DVD  
VIDEO format  
XV-N330B/XV-N332S  
AV OU  
T
•CD-R/RW written in the SVCD, Video CD or Audio CD  
format  
•CD-R/RW written in MP3/JPEG in accordance with  
the “ISO 9660” format  
1 2  
3 4  
1 2 3  
4 5 6  
To digital audio input  
Front  
ALL  
2 5  
2
The player  
Wall or  
obstructions  
NOTES  
•The VIDEO jack, AV OUT terminal, and component  
(Y, PB, PR) jacks cannot be used at the same time.  
The player’s region code is printed on the rear of  
the player  
•Depending on the disc, no signal may be outputted  
from the DIGITAL OUT. Make an analog connection  
in this case.  
•Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]  
preference display correctly according to the  
connected digital audio equipment. (See “DIGITAL  
AUDIO OUTPUT” in “Initial settings.”)  
Stand height  
Supported Digital audio formats:  
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital  
Theater Systems)*  
5 cm or more  
Floor  
Note of Color system format  
About the scanning mode indicator  
This player accommodates the PAL system, and  
also can play back discs recorded with NTSC  
system. (NTSC video signals are converted to a  
PAL signal and output.)  
[PICTURE SOURCE] of  
the PICTURE menu  
Source type of DVD VIDEO  
Connecting to a TV with composite jacks  
Film source  
[DDP]  
Video source  
[P]  
CAUTION  
NOTES  
AUTO  
FILM  
To reduce the risk of electrical shocks, fire, etc.:  
1. Do not remove screws, covers or cabinet.  
2. Do not expose this appliance to rain or moisture.  
3. The mains plug shall remain readily operable.  
•If a disc gets dirty, scratched or warped, or due to the  
disc characteristics or recording conditions, the  
player may not be able to play back such discs.  
•The player can play back audio signals recorded in  
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.  
•With some discs, operations may not be possible.  
* To play back DTS-encoded DVD VIDEO or DTS-  
encoded Audio CD discs correctly, connect the  
player to an amplifier with a built-in DTS decoder.  
Otherwise, playback sound will be distorted.  
TV  
Precautions  
NOTES  
[DDP]  
[DDP]  
Notes on the power cord  
•If your TV has a monaural audio input  
instead of stereo, use an optional audio  
cable which converts stereo audio  
output to monaural.  
VIDEO(NORMAL)/  
(ACTIVE)  
[P]  
[P]  
Supplied accessories  
IN  
•When you are away on travel or otherwise for an extended  
period of time, remove the plug from the wall outlet. A  
small amount of power (1.0 W) is always consumed while  
the power cord is connected to the wall outlet.  
•When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
•Do not handle the power cord with wet hands.  
•Disconnect the power cord before cleaning the  
player or moving the player.  
If anything is missing, consult your dealer  
immediately.  
VIDEO  
RIG  
NOTE  
Some progressive TV and High-Definition TV sets are  
not fully compatible with the player. To check the  
compatibility of your TV, contact your local JVC  
customer service center.  
Caution ––  
Disconnect the mains plug to shut the power off  
completely. The STANDBY/ON button in any  
position does not disconnect the mains line. The power  
can be remote controlled.  
STANDBY/ON button!  
•Remote control (x 1)  
•The VIDEO jack, AV OUT terminal, and  
component (Y, PB, PR) jacks cannot be  
used at the same time.  
H
T
•R6(SUM-3)/AA(15F) battery (x 2)  
AU  
D
T
IO  
LEF  
Unplayable discs  
IMPORTANT FOR LASER PRODUCTS  
1. CLASS 1 LASER PRODUCT  
•Do not alter, twist or pull the power cord, or put  
anything heavy on it, which may cause fire, electric  
shock, or other accidents.  
If you try to play back discs listed below, noise may be  
generated and causes damage to speakers.  
• DVD-R/-RW written in the VR format  
COAXIA  
L
PR  
PCM  
2. CAUTION: Do not open the top cover. There are no  
user serviceable parts inside the unit; leave all  
servicing to qualified service personnel.  
3. CAUTION: Visible and/or invisible class 1M laser  
radiation when open. Do not stare into beam or view  
directly with optical instruments.  
/STREAM  
DIGIT  
Yellow  
LEFT  
•If the cord is damaged, consult a dealer and have the• DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,  
AL OU  
VID
VDE  
T
PB  
RIGHT  
power cord replaced with a new one.  
Avoid moisture, water, dust, and high temperatures  
•Do not place the player in moist or dusty places.  
PHOTO CD, SACD  
• Unfinalized discs  
• Discs of irregular shape or discs with tape, seals or  
Audio/video cable  
(not supplied)  
O
O
T  
AUDI  
O
O
UT  
The player  
•If water gets inside the player, turn off the power and paste on either the label side or playback side.  
Information for Users on Disposal of Old Equipment  
[European Union Only]  
Red  
4. REPRODUCTION OF LABEL: CAUTION LABEL,  
PLACED INSIDE THE UNIT.  
remove the plug from the wall outlet, then consult  
your dealer. Using the player in this state may cause  
a fire or electrical shock.  
Playing back these discs may damage the player.  
White  
This symbol indicates that product with this symbol  
should not be disposed as general household  
waste.If you want to dispose of this equipment,  
please do not use the ordinary dust bin! There is a  
separate collection System for these products.  
The Non-DVD side of a “DualDisc” does not comply with  
the “Compact Disc Digital Audio” standard.  
Therefore, the use of Non-DVD side of a DualDisc on  
this product may not be recommended.  
•Do not expose the player to direct sunlight or place it  
near a heating device.  
Notes on installation  
•Select a place which is level, dry and neither too hot  
nor too cold between 5˚C and 35˚C.  
•Leave sufficient distance between the player and the TV.  
•Do not install the player in a place subject to vibrations.  
•Do not put heavy objects on the player.  
5. This unit applies to the standard “IEC 60825-1: 2001”  
for laser products.  
1
2
3
4
Turning on the power  
Initial setup  
Basic Operations  
Advanced Operations  
When you turn on the player for the first time after  
purchase, the following message appears on the TV  
screen.  
Changing the picture tone (VFP)  
Changing the language, sound  
Turning on and off the player  
Inserting the AC power plug  
Changing the display window  
contents  
and scene angle  
After all other connections have been made, insert the  
AC power plug to the wall outlet firmly.  
The VFP (Video Fine Processor)  
Insert a disc  
STANDBY/ON  
function allows you to adjust the  
OPEN/  
1 Press the button.  
CLOSE  
Each time you press DISPLAY,  
the display window contents  
changes.  
Open/close the disc tray  
Basic playback  
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO  
SETTING  
YES - PRESS ENTER NO - PRESS CANCEL  
1 Press 0 to open the disc tray.  
STANDBY/ON  
picture character according to the  
OPEN/  
CLOSE  
2 Press the button repeatedly or  
2 Place a disc in the disc tray.  
•To insert an 8-cm disc, place it in the inner  
recess.  
type of programming, picture tone or  
+
SLOW  
DISPLAY ON SCREEN  
Turning on and off the player  
Installing the batteries in the remote control  
Open the compartment cover, and place the two  
supplied R6(SUM-3)/AA(15F) batteries in the remote  
control according to the polarity markings (“+” and “–”)  
inside the compartment. Then replace the cover.  
5/to select the desired item.  
3 Press ENTER to finish the  
setting.  
personal preferences.  
+
SLOW  
DISPLAY ON SCREEN  
TOP  
MENU  
THUMBNAIL/  
LIST  
Before enjoying this player, make the initial settings as  
follows:  
1 Press VFP-I/P.  
Buttons To do  
TOP  
MENU  
THUMBNAIL/  
LIST  
Locating the beginning of a scene  
or song  
3 Press 0 to close the disc tray.  
2 Press 2/3 to select the desired  
Buttons  
To do  
3*  
Start/resume normal Playback  
Stop  
•When RESUME is ON or DISC  
RESUME, this player memorizes  
the position on the disc where you  
interrupted playback.  
– To resume playback, press 3.  
– To stop playback completely,  
press 7 again.  
ENTER  
preset.  
1 Press ENTER.  
You can select a title/chapter/  
track directly and start playback.  
For DVD Video:  
(While stopped) select title.  
(While playing back) select  
chapter.  
ENTER  
AUDIO  
For DVD Video:  
select audio languages.  
For SVCD/VCD:  
select the audio  
channel.  
7
Selected  
Preset  
DVD PLAYER SETUP  
USER 1  
GAMMA  
MENU  
SET UP  
NEXT  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
PREVIOUS SELECT  
MENU  
SET UP  
NEXT  
MID  
PREVIOUS SELECT  
BRIGHTNESS  
+
4
CLEAR  
CONTRAST  
SATURATION  
SHARPNESS  
Y DELAY  
+10  
With the label side up  
ON SCREEN LANGUAGE  
ENGLISH  
CLEAR  
ENGLISH  
FRENCH  
GERMAN  
+10  
SUBTITLE select the subtitle.  
ANGLE select the view-angle.  
For SVCD/VCD/CD:  
Select track.  
1
4
2
5
8
0
3
6
LOW  
1
4
2
5
8
0
3
6
+
2
2 Press 5/to select the on-screen language for  
To select 5: press 5.  
8*  
Pause  
Parameter  
7
9
the preference displays, etc., then press ENTER.  
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
•If you press TITLE/GROUP  
before entering the number, you  
can select the title instead of the  
chapter.  
•Each time you press the button,  
the still picture advances to the  
next frame.  
CANCEL  
RETURN  
7
9
NORMAL For watching TV in a  
Changing the Sound Field  
DVD PLAYER SETUP  
CANCEL  
RETURN  
general room.  
Each time you press SOUND  
EFFECT, the Sound Effect mode  
changes.  
•As the value becomes bigger, the  
Sound Effect works stronger.  
TITLE/  
GROUP  
SOUND  
EFFECT  
MONITOR TYPE  
PICTURE SOURCE  
SCREEN SAVER  
CONNECTIONS  
BACKGROUND  
4:3 L.B.  
16:9  
4:3 LB  
Point toward the remote sensor  
directly as possible (the operating  
range is approx. 5 m.)  
VFP DIMMER  
I/P  
CINEMA For watching a movie  
software in a room with  
suppressed light.  
¡/1 Fast forward/backward  
(While paused)  
TITLE/  
GROUP  
SOUND  
EFFECT  
VFP DIMMER  
I/P  
4:3 PS  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
SCART RGB  
STANDARD  
Slow-motion playback  
ANGLE SUBTITLE AUDIO ZOOM  
SLIDE EFFECT  
•Each time you press the button,  
The batteries will last about six months with normal use.  
If the functions of the remote control become erratic,  
replace the batteries.  
USER1  
USER2  
You can adjust  
Using the disc menu  
the playback speed changes.  
parameters that affect the  
picture character and  
store the settings as a user  
preset. See below.  
You can operate a disc—SVCD/  
VCD with Playback Control*  
(PBC)—using the disc menu  
shown on the TV screen.  
* A method of controlling disc play  
for SVCD/VCD by using the disc  
menu.  
¢/4 Skip chapter/track  
3 Press 5/to select the monitor type, then press  
ENTER.  
Main display  
•If you press and hold the button during  
playback, playback is advanced/  
reversed at 5 times normal speed.  
•Each indicator lights up when corresponding  
function/mode is activated, or corresponding  
information is on the main display.  
Precautions of the safe use of batteries  
•For a normal (conventional) TV, select4:3 LB” or  
“4:3 PS.(See “MONITOR TYPE” in “Initial  
settings.”)  
Zooming the picture  
Observe the following precautions for the safe use of  
batteries. If they are used improperly their lives will be  
shortened, they may burst or their contents may leak.  
To adjust the picture tone  
Each time you press ZOOM, the  
magnification changes.  
•You can use5//2/3 button to  
move the zoomed position.  
To return to the normal playback,  
select the normal size by pressing  
ZOOM repeatedly.  
VARIABLE (For DVD Video)  
1 Select “USER1” or “USER2.”  
2 Press 5/to select a parameter, then press ENTER.  
•For a wide-screen TV, select16:9.”  
PLAYBACK  
You can change the playback  
speed with the sound (except for  
DTS) and subtitles.  
•Remove the batteries from the remote control if it is  
not going to be used for a long period of time.  
•Remove dead batteries and dispose of them  
properly.  
•Never leave dead batteries lying around, take them  
apart, mix them with other refuse, or throw them into  
an incinerator.  
•Never touch liquid that has leaked out of a battery.  
•Do not mix new and old batteries, or batteries of  
different types, when placing them.  
DVD PLAYER SETUP  
7 For DVD  
GAMMA  
Adjust this if the neutral color is bright or dark.  
The brightness of dark and bright portion is  
maintained (LOW/MID/HIGH).  
DIGITAL AUDIO OUTPUT  
DOLBY DIGITAL/PCM  
When playing a disc with low quality recording  
conditions or scratches  
PCM ONLY  
DOLBY DIGITAL/PCM  
1 Press TOP MENU or MENU to show the disc menu.  
2 Press 5//2/3 to select a desired item, then press  
ANALOG DOWNMIX  
D.RANGE CONTROL  
OUTPUT LEVEL  
About On-screen guide icons  
To playback 1.2 or 1.5 times  
faster, press VARIABLE  
PLAYBACK on the player or ¡  
on the remote control.  
To playback 0.8 or 0.6 times  
slower, press ¡ on the remote  
control while playback is paused.  
STREAM/PCM  
: Playback.  
STANDARD  
ENTER or 3 (SELECT).  
If the disc is poorly recorded or the disc is of poor quality,  
there may be problems with playback or discs cannot be  
played back at all.  
TRACK ADJUST function allows you to play back such  
discs with better quality.  
BRIGHTNESS Adjust this if the picture is bright or dark on the  
•With some discs, you can also select items by entering the  
number using the numeric buttons.  
: Pause.  
whole (–16 (darkest) to +16 (brightest)).  
/
: Slow-motion playback with the current  
speed.  
CONTRAST  
Adjust this if the far and near position is unnatural  
(–12 to +12).  
7 For SVCD/VCD  
4 Press 5/to select a desired digital output  
signal type, then press ENTER.  
1 While stopped, press TOP MENU or 3 (SELECT) to  
show the menu.  
2 Press the numeric buttons to select a desired item.  
Each time you press TRACK ADJUST, the mode of the  
function appears on the TV screen and changes as  
follows:  
/
: Fast forward/backward playback with the  
current speed.  
SATURATION Adjust this if the picture is whitish or blackish  
Set this item correctly according to the logo on your  
receiver or decoder.  
(For SVCD/VCD)  
The disc is played back at about  
2 times faster than normal.  
(–16 (blackest) to +16 (whitest)).  
Turning on and off the player  
To select 5: press 5.  
(If you do not connect the player to such a device,  
press ENTER to finish the setting.)  
•Receiver/decoder bearing Dolby Digital logo and  
no DTS, select “DOLBY DIGITAL/PCM.”  
•Receiver/decoder bearing both Dolby Digital and  
DTS logos, select “STREAM/PCM.”  
Press  
STANDBY/ON.  
SHARPNESS* Adjust this if the picture is indistinct (LOW/HIGH).  
: At the beginning of a scene containing multi-  
angle views.  
TRACK ADJUST OFF = TRACK ADJUST  
MODE 1 = TRACK ADJUST MODE 2  
To select 23: press 2, then 3.  
To select 40: press 4, then 0.  
•To move to the next or previous page of the current menu,  
press ¢ or 4.  
•To return to the previous menu, press RETURN.  
(Only for DVD Video)  
Y DELAY  
Adjust this if the picture looks separately/  
overlapped (–2 to +2).  
The playback position moves back  
10 seconds before the current  
position (only within the same title).  
Select TRACK ADJUST MODE1 or MODE 2 which gives  
: At the beginning of a scene containing multi-  
audio sounds.  
you better results  
.
To return to the normal playback mode, select  
TRACK ADJUST OFF.  
* Adjustable when setting  
[CONNECTION] in the initial setting  
to [VIDEO COMPONENT] or  
[SCART S-VIDEO].  
3
4
5
Press 5/to adjust the parameter, then press ENTER.  
Repeat step 2 and 3 to adjust other parameters.  
Press VFP-I/P to finish the setting.  
: At the beginning of a scene containing multi-  
subtitles.  
You can change the setting so that the on-screen  
guide icons do not appear on the TV screen. (See  
“ON SCREEN GUIDE” in “Initial settings.”)  
•Receiver/decoder bearing neither Dolby Digital nor  
DTS logo, or digital recorder, select “PCM ONLY.”  
To play back without PBC  
* 38 on the player starts/pauses playback.  
•Opening the disc tray will set the function to off.  
•This function is not available for some discs.  
•If the disc cannot be played back, try to set the TRACK  
ADJUST mode before you close the tray.  
While stopped, press the numeric buttons instead of 3  
(SELECT) to start playback.  
Changing the display brightness  
To bring up the DVD PLAYER SETUP display later  
Press SET UP for a few seconds until the DVD PLAYER  
SETUP display appears.  
To reactivate PBC  
Press DIMMER to change the brightness of the  
display window.  
•Press TOP MENU or MENU.  
•Press 7 to stop playback, then 3 (SELECT).  
5
6
7
8
XV-N330B/N332S[EK]2.indd  
1
2/15/06 3:16:47 PM  
 

Init TV Video Accessories NT WGM1150 User Manual
Insignia CRT Television NS 30HTV User Manual
Intel Server S5500WB User Manual
iOptron Telescope 8506 User Manual
Johnson Hardware Door 111FD362 User Manual
JVC Car Stereo System KW XG700 User Manual
Jwin Portable CD Player JX M89 User Manual
Kambrook Electric Pressure Cooker KPR600 User Manual
King Canada Dust Collector KC 2208C User Manual
KitchenAid Blender 5KHB100 User Manual