JVC DVR LVT2015 001A User Manual

JVC Customer Care Center  
1-800-252-5722  
DR-MV80B Quick Guide FAQ’s  
Thank you for your purchase of the JVC DR-MV80B DVD Video Recorder.  
If you have any questions regarding the hookup or operation of your DR-MV80B, please contact our  
Customer Care Center at 1-800-252-5722.  
Please Note:  
Be sure to connect the AC power plug into the power outlet after all other connections are completed.  
My DR-MV80B is showing no picture.  
What DVDs can I use to record on my  
DR-MV80B?  
There is no signal output from COMPONENT OUT  
when HDMI is connected and 720p/1080i/1080p is  
selected at OUTPUT STATUS.  
c DVD-R, DVD+R, DVD-RW, DVD+RW and  
DVD-RAM can be used to record on your  
DR-MV80B.  
c Press OUTPUT STATUS button and select either  
480i or 480p in order to watch the video signal  
from COMPONENT OUT.  
For recommended recordable DVD discs, please  
refer to page 3 in your owner’s manual.  
My newly recorded DVD plays in my  
DR-MV80B but does not play in other DVD  
players.  
When I turn on my DR-MV80B, it flashes  
"Hello" and all the buttons on the remote  
control and the front panel will not respond  
for 10 - 15 seconds. Is this normal?  
c You must "Finalize" the DVD before it can play in  
another DVD player.  
Please see page 18 in your owner’s manual.  
When your DR-MV80B is first turned on, it will flash  
"Hello" as the internal EPROM chip is updated with  
information.  
During the Initial Set Up, I am being asked  
to set the Clock. Does this model have Auto  
Clock Set?  
c Please wait until "Hello" stops flashing before you  
attempt to use the remote control or front panel  
buttons. It takes 25-30 seconds until the set  
can be operated when a disc is on the tray.  
c This unit doesn’t have an Auto Clock Setting. You  
will need to manually set your clock as shown on  
page 14 of your owner’s manual under the Initial  
Setup Wizard. You can also look on page 15 of  
your owner’s manual and follow the directions for  
Clock Set.  
My DR-MV80B is showing a distorted pic-  
ture.  
Your DR-MV80B has a progressive scan feature.  
This feature only works with a TV that accepts a pro-  
gressive scan signal.  
How can I record TV program? How can I  
use Timer-Link function?  
c If the picture is distorted, press OUTPUT  
STATUS button and select 480i.  
You need to connect an external tuner such as  
Cable/Satellite box. If your Cable/Satellite box has a  
programmable ON/OFF timer function, the recording  
will start/stop at the programmed time (Timer-Link  
function).  
When the resolution is set to 1080p in VCR  
playback, the picture can be distorted.  
c If the picture is distorted, press OUTPUT STATUS  
repeatedly until the picture appears normally to  
change the resolution setting.  
See page 30 of your owner’s manual for instructions  
on how to use Timer-Link.  
For additional troubleshooting tips please refer to pages 43-45 in your owners manual.  
LVT2015-001A  
0209SKMLGEEGL  
 

Insignia Car Satellite TV System NS 39E340A13 User Manual
Intel Computer Hardware SOM 4486 User Manual
John Deere Tool Storage AC 6975TB A User Manual
JVC DVD Player XV MK5GSL User Manual
Keys Fitness Bicycle CardioMax 535 User Manual
KitchenAid Cooktop Kdrs505xss01 User Manual
KitchenAid Double Oven KEMS308S User Manual
KitchenAid Oven KEBS177SSS03 User Manual
KitchenAid Washer KAWL510B User Manual
Kodak Film Camera 5218 User Manual