SAFETY PRECAUTIONS
FOR USA
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
These are general IMPORTANT SAFEGUARDS and
certain items may not apply to all appliances.
HD IP CAMERA
Instructions (Installation)
IMPORTANT SAFEGUARDS
VN-H57U
VN-H37U
VN-H137U
INFORMATION (FOR CANADA)
1. Read all of these instructions.
2. Save these instructions for later use.
RENSEIGNEMENT (POUR CANADA)
This Class A digital apparatus complies with Canadian ICES-003.
3. All warnings on the product and in the operating instructions
should be adhered to.
4. Unplug this appliance system from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
Cet appareil num rique de la Class A est conforme á la norme
NMB-003 du Canada.
5. Do not use attachments not recommended by the appliance
manufacturer as they may cause hazards.
<VN-H57U>
<VN-H137U>
6. Do not use this appliance near water - for example, near
a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, etc.
7. Do not place this appliance on an unstable
cart, stand, or table. The appliance may
Due to design modifications, data given in this instruction
book are subject to possible change without prior notice.
For Customer Use:
Enter below the Model No. which is located
on the body.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
fall, causing serious injury to a child
or adult, and serious damage to the
appliance. Use only with a cart or stand
recommended by the manufacturer, or
sold with the appliance. Wall or shelf
mounting should follow the manufacturer’s
instructions, and should use a mounting kit
approved by the manufacturer.
< VN-H37U>
Thank you for purchasing this product.
Before operating this unit, please read the instructions carefully
to ensure the best possible performance.
Retain this information for future reference.
Model No.
Serial No.
AVERTISSEMENT
POUR EVITER LES RISQUES D'INCENDIE OU
D'ELECTROCUTION, NE PAS EXPOSER L'APPAREIL A
L'HUMIDITE OU A LA PLUIE.
An appliance and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the appliance and cart combination to overturn.
8. Slots and openings in the cabinet and the back or bottom are
provided for ventilation, and to insure reliable operation of the
appliance and to protect it from overheating, these openings
must not be blocked or covered. The openings should never
be blocked by placing the appliance on a bed, sofa, rug, or
other similar surface. This appliance should never be placed
near or over a radiator or heat register. This appliance should
not be placed in a built-in installation such as a bookcase
unless proper ventilation is provided.
9. This appliance should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your dealer
or local power company. For appliance designed to operate
from battery power, refer to the operating instructions.
10. For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna
or cable system. This will prevent damage to the product due
to lightning and power-line surges.
11. Do not allow anything to rest on the power cord. Do not locate
this appliance where the cord will be abused by persons
walking on it.
12. Follow all warnings and instructions marked on the appliance.
13. Do not overload wall outlets and extension cords as this can
result in fire or electric shock.
14. Never push objects of any kind into this appliance through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the appliance.
15. Do not attempt to service this appliance yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
16. Unplug this appliance from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
The standard camera installation procedure can be found on the back side of this page.
FOR EUROPE
WARNING
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
© 2012 JVC KENWOOD Corporation
LST1230-001D
Safety Precautions
Dear Customer
This apparatus is in conformance with the valid European
directives and standards regarding electromagnetic
compatibility and electrical safety.
European representative of JVC KENWOOD Corporation is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
The power rating is AC 24 V, 50/60 Hz/PoE (VN-H57U) or PoE (VN-H37U/VN-H137U). Use the correct voltage.
Always use the AC 24 V power source that is insulated from the primary power supply. (VN-H57U)
A level of supplied power that exceeds the ratings may result in failures, smoke or fire. If the camera breaks
down, turn off the power and contact our service center immediately.
If a level of power that exceeds the ratings is supplied, the internal components may be damaged even if no
abnormalities are observed in the appearance and/or operation of the camera. Contact our service center
immediately to arrange for an inspection (charged separately).
61145 Friedberg
Germany
Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät
stimmt mit den gültigen europäischen Richtlinien und Normen
bezüglich elektromagnetischer Verträglichkeit und electrischer
Sicherheit überein.
Die europäische Vertretung für die JVC KENWOOD
Corporation ist:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Attachments and Accessories
Instructions.......................................................2
CD-ROM...........................................................1
WARRANTY CARD (For USA).........................1
Deutschland
Information for Users on Disposal of Old
Equipment
[European Union]
Operating Precautions
This symbol indicates that the electrical and
electronic equipment should not be disposed as
general household waste at its end-of-life.
Instead, the product should be handed over to
the applicable collection point for the recycling
of electrical and electronic equipment for proper
treatment, recovery and recycling in accordance with
your national legislation.
Storage and Operating Environment
● This camera has been designed for indoor use. If you
use it outdoors, install a housing.
Disclaimer
● The motion detection feature is not a feature to prevent
theft or fire. Our company shall not be liable for any
loss or damage resulting from the use of this feature.
●
Do not install the camera in the following environments.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as improper adjustment
of other controls may result in damage and will often require
extensive work by a qualified technician to restore the
appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been
damaged.
f. When the appliance exhibits a distinct change in performance
- this indicates a need for service.
● We shall not be responsible for any loss or damage
caused in the event of privacy invasion as a result of
camera footage created by this product.
Doing so may result in malfunctions or failure.
• Hot or cold locations beyond ambient temperature
range (-10 °C to 50 °C).
By disposing of this product correctly, you will help
Attention:
to conserve natural resources and will help prevent
This symbol
potential negative effects on the environment and
is only valid in
•
Locations beyond the allowable operating humidity
range (20 %RH to 90 %RH) (no condensation allowed).
Maintenance
● Turn off the power before performing maintenance.
● Wipe using a soft cloth.
human health which could otherwise be caused by
the European
inappropriate waste handling of this product. For
Union.
• Near equipment that emits strong magnetic fields,
such as transformers or motors.
• Near equipment that emits radio waves, such as
transceivers and mobile phones.
• Locations in which excessive dust or sand exist.
• Locations that are subject to vibration.
more information about collection point and recycling
of this product, please contact your local municipal
office, your household waste disposal service or the
shop where you purchased the product. Penalties
may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
Wiping with thinner or benzene may melt or tarnish its
surface. For tough stains, wipe using a cloth that has
been dipped into a neutral detergent diluted with water.
Following that, wipe with a dry cloth.
17. When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
18. Upon completion of any service or repairs to this appliance,
ask the service technician to perform routine safety checks to
determine that the appliance is in safe operating condition.
(Business users)
•
Locations prone to moisture such as sides of windows.
If you wish to dispose of this product, please visit our web
back of the product.
Saving Energy
• Locations that may contain steam or oil, such as
kitchens.
• Locations that are subject to radiation emissions,
X-rays or corrosive gases.
• Locations where chemicals are used, such as
swimming pools.
● Use of this camera and cables connected to this
camera at locations where strong electrical or
● If the camera is not going to be used for a long period
of time, turn off the power or the system for safety
reasons and to conserve energy.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in
accordance with applicable national legislation or other
rules in your country for the treatment of old electrical and
electronic equipment.
FOR USA AND CANADA
Others
● This camera has a built-in AGC circuit. Setting AGC
to "Mid" or "High" increases the sensitivity of a dark
image, and the screen may appear grainy. This is not
a malfunction.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
● This installation should be made by a qualified service
person and should conform to all local codes.
magnetic waves are generated (e.g. near a radio, TV,
transformer, monitor, etc.) may result in images being
affected by noise interference or colors being changed.
● When this camera is used with the white balance set to
"ATW" (Auto Tracking White Balance), the color tone
of some objects may differ slightly from the actual color
due to the principle of the automatic tracking white
balance circuit. This is not a malfunction.
● This installation shall be in accordance with the National
Electrical Code, ANSI/NFPA 70. The unit is to be powered
by a Listed Class 2 power supply or using the PoE.
● The AC 24 V power supply should conform to the following:
Class 2 only (For USA), Isolated power supply only (For
Europe and other).
● Any Mention in this manual of Alarm inputs have not been
evaluated by UL to be used for Burglar Alarm Functionality.
● Special technique is required when installing this product.
Please refer to your dealer for installation.
CAUTION: TO REDUCE THE RISK OF ELECTRICK
SHOCK. DO NOT REMOVE COVER
● Do not install this camera at a location that traps heat.
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This camera discharges heat from the surface of the
main unit. Do not install at a location that may trap
heat, such as near the walls.
● The electric shutter of this camera is set to "1/30" by
factory default. For regions with a commercial power
frequency of 50 Hz, switch to the Flickerless mode
during use under fluorescent lights (excluding inverter
lighting equipment) to prevent flickers.
The lightning flash wish arrowhead symbol, within
an equilateral triangle is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that age"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
Handling Precautions
● Do not suspend yourself from this camera, shake it or
hang objects over it.
Applying excessive load may cause the camera to fall
off and cause an accident.
● Do not stack devices on top of each other.
● Rating label is pasted at the bottom or top of the camera
unit.
● When the electronic sensitivity enhancement feature
is enabled, the screen may appear grainy and more
white spots may appear because the sensitivity is
increased. However, this is not a malfunction.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
●
JVC is not liable for any compensation if you drop the
camera due to insecure mounting by not following the
installation description. Pay careful attention during
installation.
Doing so may cause a malfunction or failure due to
overheating or noise, or cause a fire.
● Do not block the vents.
● If the power supply voltage is momentarily cut off or
reduced due to lightning or the power supply to the
air conditioner being turned on, the image may be
disrupted or noise interference may occur.
● When mounting this product to a ceiling or wall, select
a location strong enough to support the weight of this
camera. If the location is not strong enough to support
the weight, be sure to reinforce the ceiling or wall before
installation.
● The camera may drop if the mounting screws are not
tightened securely. Check that the screws are tightened
appropriately and securely.
● Do not install the camera near lighting fixtures of high
temperature, such as spot lights. It might result in failure
or fires.
● It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the consent
of the owner of copyright in the sound or video recording,
broadcast or cable program and in any literary, dramatic
musical, or artistic work embodied therein.
Inadequate heat ventilation may cause this camera to
malfunction. Be sure not to block the vents around the
camera.
Information for USA
This device complies with part 15 of the FCC Rules. Changes
or modifications not approved by JVC could void the user's
authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
● When using multicast, make use of an IGMPv2-
compliant network switch.
Copyright Protection
● With the exception of the user being the copyright
holder or when permission such as for duplication has
been granted by the copyright holder, permission is
required in principle to duplicate, modify or transmit
copyrighted material.
● Some hubs/switches of products that are equipped
with intelligent features may include a broadcast/
multicast suppression function. If this function is
enabled, viewing of multicast images on this camera
may fail.
● Unauthorized duplication, modification or transmission
of copyrighted material may constitute a copyright
infringement, and the user may be liable to pay
compensation for damages. When using copyrighted
material, be sure to check the license agreement or
the copyrighted material thoroughly.
● When the Easy Day and Night or Day and Night is set
to "Auto", the image becomes black and white in dark
locations. As the sensitivity level is increased in this
case, the screen may appear grainy and more white
spots may appear. When switching between color
and black-and-white images, the brighter area on the
screen is emphasized, which may reduce the visibility.
However, this is not a malfunction.
CAUTION
● The latest version
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC
COULD VOID USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
Please visit V.NETWORKS web site to check the latest
vnetworks/index.html
● When rights or rights holders are involved with regard
to the targeted subject of duplication, permission may
be required for shooting or using (processing) it. Be
sure to check the licensing conditions thoroughly.
● It is recommended that shielded LAN cables be used
to connect to this camera. The safety and reliability of
this camera has been checked using shielded cables.
● Use of recorded materials without first gaining the prior
consent of the author is forbidden under copyright law
except in cases of personal use.
●
Under halogen lamps, light bulbs and other light
sources that emit strong infrared light, black objects
may look almost purple in the recording. It is an inherent
characteristic of this camera and not a defect. (VN-H137U)
● During viewing using the Built-in Viewer, the video
and audio may appear out of sync. This is not a
malfunction (VN-H57U).
1
☞ Continued overleaf
Adjust the field angle and focus
Image Adjustment
Turn on the power
(VN-H57U/VN-H37U)
After connections and installations are completed, turn
on the power to the unit. When the camera is booting,
the [STATUS] indicator lights up orange. It lights up
green after booting.
[FOCUS ASSIST] button
Adjust the field angle and the focus while checking the
actual image on the monitor.
Note
•
Before you touch this camera, be sure to touch the metal surface of the
monitor terminal first in order to discharge static electricity.
Otherwise, static electricity may cause the camera to malfunction.
1 Shoot the subject and press the [FOCUS ASSIST]
button.
• The camera enters Focus Assist mode, and [STATUS] indicator
flashes green and orange alternately.
Image Adjustment
(VN-H137U)
Adjust the direction of the camera
2 Adjust the focus of the lens.
Direct the camera at the target.
VN-H37U camera
Adjust the field angle and the focus while checking the
actual image on the monitor.
Note
1 Loosen the back focus setscrew using a cross slot screwdriver.
2 Shoot the fine designs farther than the subject you are shooting.
•
Do not hold the lens section when adjusting the direction of the camera.
The lens section may be damaged if you apply force to it.
Note
3
Connect the camera to a computer, and open the Built-in Viewer.
•
Before you touch this camera, be sure to touch the metal surface of the
monitor terminal first in order to discharge static electricity.
Otherwise, static electricity may cause the camera to malfunction.
•
For details about computer settings and methods for connecting
the camera to a computer, refer to “Instructions (IP Address
Settings)”.
VN-H57U
4 Select “Lens Type” from the “Lens” page in “Advanced Settings”.
• For details on the lens type, refer to “Instructions (Setting)” on
the supplied CD-ROM.
Adjust the field angle and focus
1 Remove the lens cover.
5 Adjust the back focus.
Press the lens cover marking (either A or B) up and down, release
either catch, and then release another catch from this camera.
With a Fixed-Focus Lens
• Set the focus ring of the lens to the ∞ position.
• Rotate the back focusing ring to adjust the focus.
Note
•
•
•
Do not forcibly pull the lens cover. If you do so, the fall prevention
sheet may be removed.
When mounting the lens cover, be careful not to pinch the protection
sheet.
Remove the lens cover by pulling it straight, and exercise care not to
hit the lens. If the lens is hit, it may be scratched by the lens cover.
With a Zoom Lens
• Zoom the lens to the tele position, and focus an image by
rotating the focus ring of lens.
• Zoom the lens to the wide position, and adjust the focus by
rotating the back focusing ring.
2 Adjust the direction of the camera.
6 Tighten the back focus setscrews by turning them to securely fix
them.
Direct the camera at the target.
[STATUS] indicator
Focus ring of lens
VN-H57U camera
Note
•
Do not hold the lens section when adjusting the direction of the
camera. The lens section may be damaged if you apply force to it.
1 Turn the lens focus ring to adjust the focus.
2 When you finish adjustment, secure the lens focus.
3 Adjust the field angle.
3 Press the [FOCUS ASSIST] button to release the Focus Assist
mode.
Loosen the zoom ring setscrew, and adjust the image size by
rotating the zoom ring to the right or left. After completing the
adjustment, move the fastening screw toward the direction of the
lens (direction of the subject), and tighten the screw accordingly.
4
Connect the camera to a computer, and open the Built-in Viewer.
•
For details about computer settings and methods for connecting
the camera to a computer, refer to “Instructions (IP Address
Settings)”.
4 Adjust the focus.
5 Select “Lens Type” from the “Lens” page in “Advanced Settings”.
• For details on the lens type, refer to “Instructions (Setting)” on
the supplied CD-ROM.
VN-H37U
1 Lift the focusing gear control, release the catch from position C
and insert it into position D to disengage the gear.
Back focusing ring
2 Loosen the focusing ring setscrew, and focus the image by
6 Select “Day Focus Adjust” from the “Focus” page in “Advanced
Settings”.
rotating the ring to the right or left.
Focusing ring
setscrew
• The back focus position is automatically adjusted.
Adjust the back focus position to finely adjust the focus.
• For details on back focus, refer to “Instructions (Setting)” on
the supplied CD-ROM.
Note
•
If you open the gear beyond position D, the gear shaft is released
from the bearing (E in the figure) to prevent it from being damaged.
In this case, insert the shaft into bearing E (the original position)
again and use them.
Note
•
It may be difficult to acquire focus the following places.
– Too bright places.
Finely adjust the focus
– Too dark places.
–
Places where brightness always flickering; people are passing by
– Places where there is little contrast
– Places where there are repeating
•
The focus position can be manually adjusted by using the Built-in
Viewer installed on your computer connected to the camera.
(☞ “Instructions (Setting)”) Resort to this method if it is difficult to
acquire focus automatically.
[STATUS] indicator
Focus ring of lens
[FOCUS ASSIST] button
•
•
•
If you have changed the lens after performing automatic focus
adjustment, initialize the back focus position via the "Focus"
page, and perform focus adjustment again from step 1.
If you experience difficulty with automatic focusing, select
"Manual Focus" from the "Focus" page, and manually adjust the
focus to the optimal position.
1 Press the [FOCUS ASSIST] button.
• The camera enters Focus Assist mode, and [STATUS] indicator
flashes green and orange alternately.
• The image is sharpened with the opening of the aperture.
When using a zoom lens, focus the lens, and then select "Manual
Focus" to perform focus adjustment for the zoom range.
2 Shoot the subject.
3 Finely adjust the focus.
Knob
VN-H137U
Return the catch to C from D in the diagram, and rotate the focus
adjustment gear knob to adjust the focus to the optimum position.
Catches
Focus adjustment gear
E
D
C
4 Fix the focusing ring.
Hold and press the focus adjustment gear between your fingers
in the arrow direction of the figure, and tighten screw of focus
adjusting ring.
Focusing ring
5 Release the Focus Assist mode.
• When you release the Focus Assist mode by pressing the
[FOCUS ASSIST] button, the [STATUS] indicator lights in green.
• Mount the lens cover.
A
Zoom adjustment
ring
B
Mount the lens cover
1 Mount the lens cover.
Note
Lens cover
•
•
Mount the lens cover carefully to avoid hitting the lens. If the lens is
hit, it may be scratched by the lens cover.
Mount the lens cover securely.
[STATUS]
indicator
2 Remove the protection sheet.
Protection sheet
Fall prevention sheet
Continued overleaf
3
☞
Cables
Specifications
The specifications and appearance of this unit are subject to change for purposes of improvement without prior notice.
● Connecting the power cable to AC 24 V source
● LAN cable
*
(VN-H57U)
• When connecting to a switching hub:
Use a straight cable.
• When connecting to a computer:
Use a crossing cable.
VN-H57U
VN-H37U
VN-H137U
Conductor
diameter (mm)
1.0 mm dia 1.6 mm dia 2.0 mm dia
Image sensor
1/3-inch Square-Pixel Progressive Scan CMOS (elementary color filter)
or more
or more
or more
Approximately 2,120,000 pixels
1944 (H)×1092 (V)
Effective pixels
Max cable
distance (meters)
(Reference value)
•
A 100-meter or less length and Category-5 or higher
grade STP (shielded) cable is recommended.
90
240
370
Lens mount
CS mount
–
–
Camera
section
Approved lens
Refer to our catalog.
Note
Note
(50 %,AGC High,1/30 s)
Color: 0.3 lx (typ.)
Easy Day and Night :
0.25 lx (typ.)
(F1.2, 50 % , AGC High, 1/30 s)
Color: 0.3 lx (typ.)
Black and White : 0.03 lx (typ.)
•
The crossing cable may not be used for some computer
models. Check the LAN specifications of the computer
when you directly connect this unit to the computer.
Minimum illuminance
of subject
•
For safety reasons, turn on the power only after
confirming that all the connections are completed.
Be sure to turn off the camera before connecting cables.
If you use both the AC 24 V power cable and the PoE-
based LAN cable simultaneously, the camera may fail.
Always supply power using either method.
•
•
75 Ω, 1.0 Vp-p
NTSC or PAL (switch selectable)
● Alarm I/O cable (VN-H57U)
• A 50-meter or less length shielded cable is
recommended.
Monitor output
Audio input
mini-jack (Φ3.5 stereo R ch),
can connect to a microphone
that has a plug-in power system
Input
–
Reference voltage
DC2.47 V(typ.)
–
–
Audio cable connection
Connect the stereo mini jack cable (Φ 3.5).
(VN-H57U)
Impedance
2.2 kΩ(typ.)
Line OUT (200 Ω, Max 1.9 Vp-p)
mini jack (Φ3.5 stereo L ch)
Audio output
–
Image compression
format
R channel (MIC IN) : Connect to a condenser microphone that has a plug-in power system.
L channel (LINE OUT) : Connect to a speaker that has a built-in amp.
Note
JPEG, H.264 High Profile, H.264 Baseline Profile, MPEG-4
1920 × 1080
1280 × 960
1280 × 720
640 × 480
640 × 360
320 × 240
•
Always connect an external mic to the R channel only. If you plug the mic jack directly into the [AUDIO IN/OUT]
terminal, a loud noise may be generated.
Frame size
Network
output
Memo
A shielded audio cable is recommended.
•
Audio compression μ-Law (64 kbps), AD/DA 16
formats
* For the location to connect the audio cable, refer to [Cabling] (
page 2).
–
☞
bits, Fs = 8 kHz, monaural
RJ-45
Network interface
100BASE-TX/10BASE-T/FULL/HALF/Auto-negotiation enabled
Alarm I/O cable connection
(VN-H57U)
No-voltage a contact input, PNP
open collector input, low level,
latch/momentary (500 msec or
longer) (1 mA circuit current at
low level, and 3.3 VDC applied
voltage at high level)
Alarm input
Alarm output
Alarm input
–
Connect an infrared sensor, door sensor, metal
sensor, a manual switch or other device.
Connect an alarm device, indicator, lighting, buzzer or
other device.
• To avoid noise entering the internal circuit, enter the • An alarm output signal is an open collector output.
NPN open collector -output (12
non-voltage contact signal in the Alarm IN terminal.
• Do not supply voltage.
• The alarm can be set to be activated during close
contact (MAKE) or during open contact (BREAK)
can be set from the menu.
You can configure the menu to set the alarm to
sound when contacts short circuit (MAKE) or
when the contacts are open (BREAK). (Pressure
resistance lower than 16V, 30 mA)
• This terminal has different polarities. The output
voltage at the positive terminal must always be
higher than the output voltage at the negative
terminal. Otherwise, the circuit may be damaged.
Alarm output
Alarm record
VDC safe excitation voltage, and
30 mA allowable sink current)
–
16 MB
Focal length
–
f = 2.8 to 10.5 mm
Maximum aperture
ratio
F1.2 (f = 2.8 mm) to F2.6
(f = 10.5 mm)
–
•
The alarm signal should last for at least 500 msec. If
the alarm signal is short, it may not be recognized.
Lens
Aperture range
Zoom ratio
–
F1.2 to F360
3.75 x
● Input conditions
–
● Output conditions
• Connect non-voltage a contact or open collector
output circuit
(For details on how to set polarities, please refer to
“Instructions (Settings)”.)
Standards
Compliant with IEEE802.3, IEEE802.3u and IEEE802.3af
LAN
standards
• Equivalent to NPN open collector output
(For details on how to set the output logic, please
refer to “Instructions (Settings)”.)
• Safe excitation voltage: DC16 V or lower
• Allowable surge current: 30 mA
• Momentary (100 ms to 5000 ms) output
(For details on how to set the time, please refer to
“Instructions (Settings)”.)
Communication
protocol
TCP/IP, UDP/IP, FTP, ICMP, ARP, DHCP, SNTP, HTTP, SMTP, RTP, RTSP, IPv4, IPv6,
DSCP, HTTPS, SNMP
Power supply
voltage
AC24 V 50 Hz/60 Hz, or
PoE(DC-48 V)
• Low level terminal current below 1 mA
• High level terminal current 3.3 V
This
PoE(DC-48 V)
AC24 V 0.5 A, or PoE 150 mA
Current consumption
120 mA
(7.2 W)
camera
Sensor example (1)
General
Ambient
temperature
-10 °C to 50 °C (Operation)
0 °C to 40 °C (Recommended)
DC3.3 V
VCC
Input 1 or
Input 2
Alarm device
example
Ambient humidity
Mass
20 %RH to 90 %RH (without condensation)
R
This
camera
OUT
Approx. 360 g
Approx. 340 g
Approx. 390 g
DC12 V
3.3 V 1 mA
G
Output 1 or
Output 2
R
IN
G
(Alarm input equivalent circuit)
Sensor example (2)
Relay switch or
other devices
VN-H57U External dimensions (unit: mm)
G
G
1/4-20UNC
OUT
37
(Alarm output equivalent circuit)
Screw hole for the camera-mounting
Note
G
• Connect the G terminal cable of this camera to the
GND of the alarm device.
connecting
* For
the Alarm I/O cable, refer to [Cabling] (
page 2).
☞
114
55
123.5
VN-H37U External dimensions (unit: mm)
114
121
55
1/4-20UNC
37
Screw hole for the camera-mounting
Troubleshooting
Symptom
Causes and Countermeasures
Movement of network image is
not smooth
• If the monitor image output is turned ON, a lower frame rate is set for
network images.
VN-H137U External dimensions (unit: mm)
• If you turned the monitor image output to OFF, set the frame rate
again.(☞ “Instructions (Setting)” - “Internet Explorer Setting” -
“Encoding Page”)
The image output may be turned Off on Internet Explorer.
Check the monitor output setting.
No monitor image is output.
• Check the MIC connection.
162
170
The external mic sound is not heard.
55
•
Is the audio setting turned off? (
“Instructions (Setting)” - “Audio Page”)
☞
•
•
•
Is the focus adjustment gear engaged? Check the location of the catch. (VN-H137U)
Make sure that the lens is compatible with a CS mount.(VN-H57U/VN-H37U)
1/4-20UNC
Screw hole for the camera-mounting
85
Lens is out of focus
After initializing the back focus position(
perform focus adjustment again. (VN-H57U)
Rotate the back focusing ring to adjust the focus.(VN-H37U)
☞
“Instructions (Setting)” - “Focus Page”),
•
LST1230-001D
4
|