JVC Stereo System XL FZ700BK User Manual

COMPACT DISC AUTOMATIC CHANGER  
Introduction  
2
5
XL-FZ700BK  
Before using for the first time  
Basic operations  
7
Various playback patterns  
General informations  
11  
13  
OPEN/  
CLOSE  
REPEAT  
STANDBY/ON  
RANDOM PROGRAM CANCEL  
CALL  
DISC  
DISC  
1
5
DISC  
DISC  
2
6
DISC  
DISC  
3
7
DISC  
4
DISCSKIP  
1
5
9
2
6
3
7
4
8
OPEN/CLOSE  
PLAY  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE/DISC SKIP  
10  
+10  
STANDBY  
STANDBY/ON  
STOP PAUSE  
SKIP  
7
-
DISC  
PLAY  
&
EXCHANGE  
XL-FZ700 COMPACT DISC AUTOMATIC CHANGER  
RM-SXLFZ700J  
REMOTE CONTROL  
CD-R/RW PLAYBACK  
.
.
.
.
D CONVERTER  
1BIT  
P
E
M
D
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located on the rear, bottom or  
side of the cabinet. Retain this information  
for future reference.  
Model No.  
Serial No.  
LVT0863-003A  
[UJ]  
 
We would like to thank you for purchasing one of our  
JVC products.  
Before connecting this unit to the wall outlet, please read  
the instructions carefully to ensure that you obtain the  
best possible performance.  
English  
English  
Table of Contents  
Introduction  
Page 2  
If you have any questions, please consult your JVC  
dealer.  
Precautions......................................................................... 2  
About this manual............................................................. 2  
Names of buttons.............................................................. 3  
Main unit...................................................................................3  
Remote control unit.................................................................4  
Display window........................................................................4  
Before using for the first time  
Page 5  
Installing the unit............................................................... 5  
Connecting to the Analog Output Jacks......................... 5  
Connecting to the Digital Output Jack............................ 5  
Supplying the power......................................................... 5  
To connect the AC power cord of the main unit ...................5  
To install the batteries in the remote control unit.................6  
COMPU LINK connection.................................................. 6  
Basic operations  
Page 7  
Basic functions for disc playback .................................... 7  
Turning on the power of this unit...........................................7  
Remote control operation .......................................................7  
Inserting and removing discs .................................................7  
Playing a disc ...........................................................................8  
Stopping playback ...................................................................8  
Locating a point to start playback .................................. 9  
Skipping to a desired disc during playback (DISC SKIP)......9  
Changing to a desired disc during playback DISC (1-7) .......9  
Skipping to a desired track during playback .........................9  
Searching for a desired section..............................................9  
Specifying a desired track in stop mode..............................10  
Changing discs during playback (EXCHANGE)............. 10  
Playing tracks in a order of disc/track number............. 10  
Various playback patterns  
Page 11  
Playing tracks in a desired order (Program Play) ......... 11  
Playing tracks in a random order (Random Play)......... 12  
Playing repeatedly (Repeat Play) ................................... 12  
Repeating all the tracks of a disc..........................................12  
Repeating one track...............................................................12  
General informations  
Page 13  
COMPU LINK remote control system............................ 13  
Care and handling............................................................ 14  
Troubleshooting .............................................................. 15  
Specifications................................................................... 15  
1
 
Introduction  
Precautions  
About this manual  
This manual covers the operating instructions for the  
compact disc automatic changer XL-FZ700BK.  
Load compact discs only  
Never insert anything other than compact discs into any  
part of the player.  
This manual is organized as follows:  
The first part, “Introduction”, gives you the precautions  
when using this unit, and shows you the names of  
buttons on the main unit and the remote control unit.  
If a problem persists  
If something goes wrong, turn off the power  
immediately. If the same problem reoccurs when the  
power is turned on once more, turn off the power again  
and consult your JVC dealer.  
The second part, “Before using for the first time”, tells  
you what kind of operations you should do before  
playing discs. This part describes where to place the unit  
for best results, how to install batteries in the remote  
control unit and how to connect this unit to the amplifier/  
receiver and other components.  
Handling the power cord  
When unplugging from the wall socket, always pull the  
plug body, never the power cable.  
Volume settings  
A CD player has almost zero background noise. Because  
of this, the technique of listening to the background level  
and then setting the volume before the music starts, as  
used with analog turntables or tape decks, cannot be  
used. If you raise the volume level too high, speaker  
damage may result.  
The third part, “Basic operations”, describes how to load  
discs, and convenient basic functions for playing discs.  
The fourth part, “Various playback patterns”, describes  
various functions for playing discs.  
Condensation  
The fifth part, “General informations”, describes the  
COMPU LINK remote control system which facilitates  
various operations between JVC components, and  
explains how to take care of discs.  
This part also includes “Troubleshooting”, which tells  
you how to check the unit when a malfunction occurs,  
and the technical informations regarding this unit.  
The CD player uses optical components. If it is moved  
from a cold location to a warm one, or is used in a room  
subject to excessive humidity or where a fire has just  
been lit, condensation could form on the optical  
components.  
This may prevent the laser beam from being properly  
transmitted and thus causes noise or even a  
malfunction.  
If condensation has formed and the CD player does not  
function correctly, we recommend that you leave it  
turned on for an hour or two. If at the end of this time the  
CD player still does not function properly, please consult  
your JVC dealer.  
Transporting the unit  
When carrying this unit, it is best to avoid either  
tilting or turning it upside-down. When you cannot  
avoid doing so, please remove the discs first.  
Using compact discs  
Compact discs are made of plastic and can easily be  
damaged. If the disc is dirty, scratched, warped or  
otherwise damaged, the digital information may not be  
picked up correctly.  
Applicable discs  
This unit can only be used with compact discs bearing  
the marks below. Never use discs of other types.  
Recordable  
ReWritable  
CD-R and CD-RW discs recorded with the Audio CD format  
can be played back, though some may not be played back  
because of the disc characteristics or recording condition.  
NOTE  
CD-R and CD-RW discs must be finalized.  
2
 
                                                                                         
                        
                        
                                                                                     
                                                                                   
                                                                                              
                                                                                                 
                                                                                                      
Introduction  
English  
Names of buttons  
Main unit  
8 PAUSE button  
EXCHANGE/DISC SKIP button  
STANDBY indicator  
0 OPEN/CLOSE button  
3 PLAY button  
% STANDBY/ON button  
DISC (1-7) buttons  
OPEN/CLOSE  
PLAY  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE/DISC SKIP  
STANDBY  
STANDBY/ON  
STOP PAUSE  
SKIP  
7
-
DISC  
PLAY  
&
EXCHANGE  
XL-FZ700 COMPACT DISC AUTOMATIC CHANGER  
CD-R/RW PLAYBACK  
.
.
.
.
D CONVERTER  
1BIT  
P
E
M
D
Display window  
remote sensor  
7 STOP button  
Carousel  
4/¢ SKIP buttons  
DIGITAL OUT OPTICAL jack  
OUTPUT (RIGHT/LEFT) jacks  
COMPU LINK-3  
(SYNCHRO) jacks  
AC IN connector  
3
 
                                                                              
                                                                              
                                                                              
                 
                     
                                                                              
                      
                                                                              
Introduction  
Remote control unit  
OPEN/CLOSE button  
PROGRAM button  
Remote control signal transmitter  
% STANDBY/ON button  
Turns on the unit or puts it in  
STANDBY mode  
OPEN/  
CLOSE  
REPEAT  
STANDBY/ON  
CALL  
REPEAT button  
CANCEL button  
RANDOM PROGRAM CANCEL  
RANDOM button  
CALL: displaying program  
contents button  
DISC 1  
DISC 5  
DISC 2  
DISC 6  
DISC 3  
DISC 4  
DISC (1-7) buttons  
DISC 7 DISC SKIP  
DISC SKIP button  
1
5
9
2
6
3
7
4
8
Track buttons  
10  
+10  
3: Play button  
4/¢: skip buttons  
7: Stop button  
1/¡: backward/  
fast forward buttons  
8: Pause button  
RM-SXLFZ700J  
REMOTE CONTROL  
Display window  
Disc indicators (1-7)  
EXCHANGE indicator  
Music calendar  
EXCHANGE DISC  
REPEAT1  
TRACK TOTALTIME  
STEP  
PROGRAM  
RANDOM  
Play mode indicators  
4
 
Before using for the first time  
English  
Installing the unit  
Connecting to the Digital  
Output Jack  
Best location  
Select a location which is level, dry and neither too cold  
nor too hot (temperature range 5°C to 35°C). Also, avoid  
dusty locations or any location subject to vibration.  
It is possible to transmit a digital sound signal from this  
unit directly to a MD recorder, etc.  
NOTES  
If interference occurs  
Never connect the digital output cable except to the  
digital input jack.  
If this unit is placed near a tuner or a radio receiver tuned  
to AM frequencies, interference may occur. If this  
happens, we recommend either that you move this unit  
as far as possible from the tuner or receiver or briefly  
turn off the power of this unit.  
An optical digital cord (optional) is required to make  
this connection. Refer to the instruction manual of the  
MD recorder, etc. for details.  
Rear panel of this unit  
Connecting to the Analog  
Output Jacks  
MD recorder, etc.  
Connecting to an amplifier or receiver allows you to  
listen to the sound from the speakers.  
Connect the OUTPUT jacks of this unit to the line input  
jacks of an amplifier or receiver with the supplied audio  
cord.  
Optical digital cord (optional)  
DIGITAL OUT  
To digital input jacks  
(OPTICAL)  
NOTES  
Never connect the OUTPUT jacks to the PHONO jacks  
of the amplifier or receiver. This may cause damage to  
the components.  
Supplying the power  
Make sure that the same channels are connected  
between this unit and the amplifier or receiver: LEFT to  
LEFT and RIGHT to RIGHT.  
To connect the AC power cord of the  
main unit  
Do not connect the power plug until all connections are  
complete.  
Connect the plugs firmly. Loose connections may cause  
noise or malfunction.  
The AC power cord is supplied separately and must be  
connected to the unit.  
Plug the AC power cord into the  
AC IN connector of  
this unit and connect to the wall outlet after all  
connections are complete.  
Rear panel of this unit  
NOTE  
When using the COMPU LINK Remote Control System  
(see page 6), do not connect the power cord to the  
SWITCHED AC OUTLET of an amplifier or receiver.  
Amplifier or receiver  
AC IN connector  
Rear panel of this unit  
To audio input jacks  
Audio cord  
COMPU LINK  
-
3
AC IN  
DIGITAL  
OUT  
(SYNCHRO)  
OUTPUT  
RIGHT LEFT  
OPTICAL  
Speaker unit  
Supplied AC power cord  
To the wall outlet  
(to be continued)  
5
 
Before using for the first time  
To install the batteries in the remote  
control unit  
COMPU LINK connection  
JVCs COMPU LINK Remote Control System provides  
unified control over system components connected with  
COMPU LINK. Connecting JVC audio components with  
the COMPU LINK jacks automatically controls relative  
operations between components and facilitates various  
operations. With the COMPU LINK connection to an  
amplifier or receiver, you can operate XL-FZ700BK with  
the amplifier or receivers remote control unit.  
Synchronized recording is also available with this  
feature.  
Before operating the remote control unit, install two  
batteries.  
1While pushing the tab of the rear cover,  
remove the rear cover from the remote control  
upwardly.  
Connecting the COMPU LINK cord  
The COMPU LINK-3 (SYNCHRO) jacks are used to output  
and input the control signal for the COMPU LINK remote  
control system.  
COMPU LINK-compatible products are provided with the  
jacks marked COMPU LINK-1, COMPU LINK-2 or COMPU  
LINK-3, referring to the COMPU LINK version. XL-  
FZ700BK is equipped with COMPU LINK-3. You can  
connect XL-FZ700BK also to a component with lower  
COMPU LINK versions. But, in that case, only the lower  
versionsfeatures will be available.  
2Install batteries. Be sure that the batteries are  
installed with correct polarity, (+) and (–).  
Plug the supplied COMPU LINK cord into the COMPU  
LINK-3 (SYNCHRO) jack on the rear panel of XL-FZ700BK.  
Plug the other end into the COMPU LINK jack of the other  
component. If there are two COMPU LINK jacks, plug it  
into either of them.  
Connect to the COMPU LINK-3 (SYNCHRO) jack of  
another component equipped with the Compu Link  
remote control system.  
3
While aligning the end of the rear cover with  
the remote control, assemble the rear cover on  
the remote control by pushing it downwardly.  
Rear panel of this unit  
COMPU LINK cord*  
NOTES  
Incorrect use of batteries can cause corrosion or damage.  
Note the following points to lengthen battery life.  
Turntable  
Cassette deck  
* Only one COMPU LINK cord is supplied.  
Install batteries observing the correct polarity, (+) and ().  
Do not use new and old batteries simultaneously.  
Amplifier or receiver  
Batteries with similar shapes may have different  
voltage ratings. Be sure to use the correct batteries.  
Remove batteries from the remote control unit if it will  
not be used for a long period of time.  
Do not expose batteries to heat or flame.  
Battery replacement  
Service life of batteries depends on the condition of use;  
standard life is about one year. When the batteries  
become weak, the operating distance of the remote  
control unit becomes short. If this happens, replace the  
batteries R6P(SUM-3)/AA(15F) with new ones.  
NOTE  
The lower the temperature, the shorter the battery life.  
6
 
                
                
Basic operations  
English  
Basic functions for disc  
playback  
Turning on the power of this unit  
Press the % STANDBY/ON button to turn on this unit.  
The STANDBY indicator is turned off and the display is  
turned on.  
The number written on the carousel corresponds  
to the disc number shown on the display  
Main unit  
Remote control unit  
STANDBY  
STANDBY/ON  
NOTE  
From the second time on, the carousel opens with the  
STANDBY/ON  
previously played disc on the left-front tray.  
Press again to turn off the power and activate the  
standby mode. The STANDBY indicator is lit and the  
display goes out.  
2Press the EXCHANGE/DISC SKIP button on  
the main unit or the DISC SKIP button on the  
remote control unit to select accessible disc  
trays if required.  
The power is automatically turned on also by;  
Pressing the 0 OPEN/CLOSE button on the main unit  
or the OPEN/CLOSE button on the remote control unit.  
The carousel will be opened.  
Main unit  
Remote control unit  
Pressing the 3 PLAY button on the main unit or  
the 3 button on the remote control unit.  
The disc that was lastly selected will be played back. If  
no disc is set in all the disc trays, NO DISCwill  
appear.  
DISC SKIP  
EXCHANGE/DISC SKIP  
Pressing the DISC (1-7) button on the main unit or the  
remote control unit.  
The corresponding disc will be played back.  
Each time the button is pressed, the carousel  
rotates clockwise by an amount for accessing the  
next two disc trays.  
NOTES  
A small amount of power (3.0 W) is consumed even in  
the standby mode.  
To turn off the power completely, disconnect the power  
cord from the wall outlet.  
Label  
side up  
Remote control operation  
Point the remote control unit towards the remote sensor  
and operate it steadily and carefully. The remote control  
unit can be used within a range of about 7 m from the  
remote sensor, and at angles of up to about 30 degrees.  
3Place one or two discs in the disc tray(s) with  
the label side up.  
Inserting and removing discs  
To insert an 8-cm disc, place it in the inner recess.  
Up to 7 discs can be set on the disc tray carousel.  
CAUTION  
When loading discs in the disc tray, be sure to put the  
discs according to the recess. Otherwise, the discs  
will be damaged when the carousel is closed, and  
cannot be removed from the unit.  
1Open the carousel by pressing the 0 OPEN/  
CLOSE button on the main unit or the OPEN/  
CLOSE button on the remote control unit.  
You can access to two of seven trays.  
Main unit  
Remote control unit  
4Repeat steps 2 and 3 to set more discs onto  
OPEN/  
CLOSE  
other disc trays.  
OPEN/CLOSE  
5Press the 0 OPEN/CLOSE button on the main  
unit or the OPEN/CLOSE button on the remote  
control unit to close the carousel.  
7
 
                                                             
                
           
                                                                  
Basic operations  
Disc to be played back  
To stop playback temporarily  
The disc set in the front-left disc tray when the carousel  
closes is loaded for playback. If no disc is set in the front-  
left disc tray when the carousel closed, the unit rotates  
the carousel clockwise until it finds a disc. If no disc is set  
at all in the carousel, NO DISCwill appear on the  
display.  
Press the 8 PAUSE button on the main unit or the 8  
button on the remote control unit. The 8 indicator lights  
on the display and playback stops temporarily.  
To resume playback, press the 3 PLAY button on the  
main unit or the 3 button on the remote control unit  
again.  
Playback operation before closing the carousel  
By pressing the 3 PLAY button on the main unit or the  
3 button on the remote control unit, the carousel  
closes and the disc to be played back firstly will be  
played back.  
Stopping playback  
Press the 7 STOP button on the main unit or  
the 7 button on the remote control unit.  
By pressing the DISC (1-7) buttons on the main unit or  
the remote control unit, the specified disc will be  
played back.  
Main unit  
Remote control unit  
STOP  
Playing a disc  
Playing a disc  
Press the 3 PLAY button on the main unit or  
the 3 button on the remote control unit.  
The 3 indicator lights on the display and playback starts.  
Total Playback time  
A few seconds later  
Main unit  
Remote control unit  
Total track number  
PLAY  
About the DISC (1-7) indicators  
Each DISC indicator shows the current status of the  
corresponding tray as follows:  
DISC  
TRACK  
TIME  
STEP  
6
7
The circle of the DISC indicator will light if a disc is set  
in the corresponding disc tray. (The numbers 1-7 are  
always lit.)  
Playback elapsed time  
DISC number being played back  
The circle is unlit if no disc is set in the corresponding  
disc tray.  
NOTE  
All available discs are sequentially played back.  
Playback will continue until you stop it. (See Stopping  
playbackon this page.)  
NOTES  
Inserted disc is detected when the carousel is turned.  
So, until then, the unit cannot know the disc presence  
status of the disc tray. For such disc trays, the unit  
temporarily turns on the corresponding indicators.  
Playing a desired disc  
Press a desired DISC (1-7) button.  
The 3 indicator lights on the display and playback starts.  
During program play mode, the number shows the  
presence of disc and the circle shows the disc being  
programed.  
Main unit  
Remote control unit  
During random play mode, the number shows the  
presence of disc and the circle shows the disc being  
played back for random play.  
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
DISC 5  
DISC 6  
DISC 7  
About the music calendar  
When a disc to be played back is read, the contents (track  
numbers) of the disc appear on the music calendar. As  
the track is finished to play back or skipped, the track  
number will disappear from the music calendar.  
The DISC (1-7) button without the circle in the DISC  
indicator does not work.  
NOTE  
During program play mode, only the programed tracks  
appear on the music calendar.  
8
 
                                                                                       
                                                                                          
                                                                                   
                                                                                       
              
                  
Basic operations  
Using the track buttons  
English  
Locating a point to start  
playback  
Remote control unit  
1
5
9
2
6
3
7
4
8
Skipping to a desired disc during  
playback (DISC SKIP)  
10  
+10  
Use the DISC SKIP button on the remote control unit.  
To skip to the desired track during playback, press the  
corresponding track buttons.  
Remote control unit  
DISC SKIP  
[How to use the track buttons]  
When selecting track number 11 or above, use the [+10]  
button.  
Example:  
To select track number 12, press [+10] and then [2].  
To select track number 25, press [+10] twice and then [5].  
To select track number 30, press [+10] twice and then [10].  
Each time the DISC SKIP button is pressed, the selected  
DISC number changes from 1 to 7, then back to 1.  
The selected disc will be played back.  
You can also use this button during stop mode.  
NOTE  
Searching for a desired section  
The EXCHANGE/DISC SKIP button on the main unit  
does not work for this purpose.  
During playback, press and hold the 4/¢ SKIP  
buttons on the main unit or the 1/¡ buttons on the  
remote control unit.  
Changing to a desired disc during  
playback DISC (1-7)  
Main unit  
Remote control unit  
SKIP  
Press any DISC (1-7) button to select a desired disc.  
Main unit  
Remote control unit  
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC 6 DISC 7  
DISC 1  
DISC 2  
DISC 3  
DISC 4  
Playback advances or reverses rapidly.  
DISC 5  
DISC 6  
DISC 7  
While the 4 button on the main unit or the 1 button  
on the remote control unit is kept pressed, playback  
rapidly reverses toward the beginning of the track. While  
the ¢ button on the main unit or the ¡ button on the  
remote control unit is kept pressed, playback rapidly  
advances toward the end of the track. When the desired  
section is reached, release the button. The player  
resumes normal playback from that point.  
The selected disc will be played back.  
You can also use these buttons during stop mode.  
Skipping to a desired track during  
playback  
While searching, you can hear a playback sound.  
Using the 4/¢ buttons  
Main unit  
Remote control unit  
SKIP  
To skip back to the beginning of the track being played,  
tap the 4 button. When the beginning of the track is  
reached, tapping this button again skips to the previous  
track.  
To skip to the next track, tap the ¢ button.  
You can also use these buttons during stop mode.  
9
 
                            
Basic operations  
Specifying a desired track in stop mode  
Playing tracks in a order of  
disc/track number  
To specify the desired track number, use the track  
buttons (1-10, +10).  
You can continuously play all the loaded discs, starting  
from any track on any disc.  
Remote control unit  
1
5
9
2
6
3
7
4
8
1Press the 3 PLAY button on the main unit or  
the 3 button on the remote control unit to  
start playback.  
10  
+10  
Playback starts from the current disc.  
The following display appears.  
The unit searches for the selected track and playback  
starts automatically.  
To specify the track number with the track buttons, see  
How to use the track buttonson page 9.  
DISC  
TRACK  
TIME  
STEP  
6
7
Playback elapsed time  
Track number being played back  
Selected disc number  
Changing discs during  
playback (EXCHANGE)  
2Use the DISC (1-7) buttons on the main unit  
or the remote control unit to select the disc  
number which contains the first track you  
want to play.  
During playback of a disc, you can change other discs in  
the disc trays without stopping playback.  
When you want to play from the first track on the  
selected disc, it is not necessary to select the track  
number. In this case, omit the next step.  
Press the EXCHANGE/DISC SKIP button on the main unit.  
The carousel opens and you can change the discs inside.  
The EXCHANGE indicator lights on the display.  
3Select the track number with the 4/¢  
buttons on the main unit or the remote control  
unit or the track buttons on the remote control  
unit.  
Main unit  
EXCHANGE/DISC SKIP  
The selected track number appears on the display  
and playback starts from the selected track  
automatically.  
To select the track number with the track buttons,  
see How to use the track buttonson page 9.  
To change the discs loaded in the far end of the disc tray,  
press the EXCHANGE/DISC SKIP button on the main unit  
or the DISC SKIP button on the remote control unit to  
make the carousel rotate. After changing the discs, press  
the 0 OPEN/CLOSE button to close the carousel. Then,  
the EXCHANGE indicator goes out on the display.  
DISC  
TRACK  
TIME  
STEP  
6
7
It is also possible to change the discs during program  
playback or random playback, following the above  
procedure.  
Track number being played back  
NOTE  
When the carousel is opened by pressing the  
EXCHANGE/DISC SKIP button on the main unit, it is not  
possible to close it by pushing it back with hand.  
Always press the 0 OPEN/CLOSE button to close the  
carousel.  
10  
 
Various playback patterns  
English  
4Repeat steps 2 and 3 for other tracks and/or  
discs to be programmed.  
Playing tracks in a desired  
order (Program Play)  
You can program up to 32 steps.  
5Start playback by pressing the 3 PLAY button  
on the main unit or the 3 button on the  
remote control unit.  
You can play only the favorite tracks in any desired order.  
1In stop mode, press the PROGRAM button so  
that the PROGRAM indicator lights on the  
display.  
The programmed tracks and/or discs are played in  
the programmed order and, when all the  
programmed tracks/discs are played back, program  
playback stops.  
Remote control unit  
You can skip to a desired program step with the  
4/¢ buttons.  
PROGRAM  
If you have programmed all discs as AL,  
pressing ¢ (or 4) will skip to the next (or  
previous) disc.  
To check the program contents  
2Select the disc which contains the track to be  
In stop mode or during playback, press the CALL  
button on the remote control unit. Each time the CALL  
button is pressed, the program contents are displayed  
in the programmed order. (After pressing the CALL  
button, perform the next button operation within five  
seconds (during the program step number is  
blinking).)  
programmed with the DISC (1-7) button. AL”  
(all tracks) appears on the display.  
ex.) When disc 4 is selected.  
Shows that a disc is loaded  
DISC  
TRACK  
TIME  
STEP  
To modify the program contents in stop mode  
PROGRAM  
To add a new program step to the last step, enter the  
new disc number and/or track number referring to  
steps 2 and 3 above.  
6
7
To delete the program step from the last step, press  
the CANCEL button on the remote control unit. Each  
time the CANCEL button is pressed, the last program  
step is deleted one by one.  
To delete any program step, press the CALL button to  
locate the program step number you want to delete,  
and then press the CANCEL button. (After pressing  
the CALL button, perform the next button operation  
within five seconds (during the program step number  
is blinking).)  
Program step number  
PROGRAM indicator AL (all tracks)  
To program the entire disc  
When the track number is not specified after  
selecting the disc number, all tracks on the selected  
disc are programmed.  
3Select the track number by pressing the  
track buttons on the remote control unit.  
To select the track number with the track buttons,  
see How to use the track buttonson page 9.  
To exit program mode in stop mode  
To exit program mode, press the PROGRAM button on  
the remote control unit so that the PROGRAM  
indicator goes out on the display. However, the  
program contents are not erased and, whenever the  
program mode is selected, you can play the tracks in  
programmed order.  
Remote control unit  
1
5
9
2
3
7
4
8
6
10  
+10  
To clear the entire program contents  
In stop mode, press the CANCEL button on the remote  
control unit repeatedly until entire program contents  
are deleted. Or, press the 0 OPEN/CLOSE button on  
the main unit or the OPEN/CLOSE button on the  
remote control unit.  
ex.) When track 5 is selected.  
Shows the disc being programmed  
Even after the entire program contents have been  
cleared, the unit remains in program mode.  
Note that turning off the unit does not clear the  
program contents.  
DISC  
TRACK  
TIME  
STEP  
PROGRAM  
6
7
If the AC power cord is disconnected from the outlet,  
the program will be erased.  
Track number selected for the program step 1  
If you want to cancel the displayed program step,  
press the CANCEL button on the remote control  
unit and then enter a new disc number and/or  
track number.  
11  
 
Various playback patterns  
Playing tracks in a random  
order (Random Play)  
Playing repeatedly  
(Repeat Play)  
You can select and play tracks in random order from all  
the discs loaded in the unit.  
Selections are made so that each track is played only  
once.  
Normally, all available discs are sequentially played  
back. However, with the repeat play function, you can  
repeatedly play all tracks of a disc or one track.  
It is also possible to utilize this function in combination  
with random/program playback function.  
1In stop mode, press the RANDOM button so  
that the RANDOM indicator lights on the  
display.  
Repeating all the tracks of a disc  
Press the REPEAT button repeatedly until the REPEAT  
indicator lights on the display.  
Remote control unit  
RANDOM  
Remote control unit  
REPEAT  
DISC  
TRACK  
TIME  
STEP  
PROGRAM  
RANDOM  
RANDOM indicator  
REPEAT indicator  
2Press the 3 PLAY button on the main unit or  
the 3 button on the remote control unit to  
start playback.  
When playback starts, all tracks of the disc being  
selected will be played repeatedly.  
(To select a desired disc, see Playing a desired discon  
page 8.)  
To skip to the track to be played next, press the  
¢ button.  
To skip to the beginning of the current track,  
press the 4 button.  
You can use this function together with the program  
playback or random playback. In program mode, the  
programmed contents are played repeatedly. In  
random mode, all the tracks are played repeatedly in  
random order.  
To cancel random playback  
In stop mode, press the RANDOM button on the  
remote control unit. The RANDOM indicator goes out  
and the random playback is cancelled.  
Repeating one track  
Press the REPEAT button repeatedly until the REPEAT 1  
indicator lights on the display.  
REPEAT1 indicator  
When playback starts, the track being selected will be  
played repeatedly.  
(To select a desired track, see Skipping to a desired  
track during playbackon page 9.)  
You can use this function together with the program  
playback or random playback.  
To cancel repeat mode  
Press the REPEAT button so that both the REPEAT and  
REPEAT 1 indicators go out.  
12  
 
                                                                              
                                                                              
                                                                                             
                                                                       
                                                                                                   
                                                                                                           
General informations  
English  
COMPU LINK remote control system  
The COMPU LINK Remote Control System controls relative operations between components automatically and  
facilitates various operations.  
This is a system originated and developed by JVC for facilitating various system operations.  
The following is a brief explanation of this system:  
Automatic source selection  
When the supplied COMPU LINK cord is utilized to connect this unit to others equipped with COMPU LINK jacks,  
switching-in of each system component can be performed with a single touch on the source selector button located on a  
JVC amplifier or receiver.  
When selection is carried out in this manner, the corresponding unit will automatically start operation.  
Upon pressing of the play button, the source selector of the amplifier or receiver changes automatically. When a new  
unit is switched in, the previously selected component stops operation within five seconds.  
Synchronized recording  
Synchronized recording refers to the process in which a JVC cassette deck starts recording, synchronized with this unit.  
Synchronized recording is carried out as follows:  
1 Set the cassette deck to the recording pause mode in accordance with its instructions.  
2 To record only certain tracks or discs, program the tracks in any order, as desired.  
3 Press the 3 PLAY button on the front panel of this unit. The cassette deck automatically starts recording, synchronized  
with this unit.  
NOTES  
Synchronized recording stops automatically when this unit stops playback.  
To cancel synchronized recording, press the stop button of this unit or the cassette deck.  
To properly operate the synchronized recording, the buttons/controls other than % STANDBY/ON, 7 STOP and 0 OPEN/  
CLOSE buttons do not function.  
If the recording pause mode is set on the cassette deck by pressing the 8 PAUSE button after pressing the REC and 3 PLAY  
buttons simultaneously, synchronized recording is not possible. For details, refer to the instructions for the cassette deck.  
Automatic power on/off function  
This function is to control the power on/off of the receiver/amplifier or this unit respectively as the following.  
When this unit enters playback mode, the power of the receiver or amplifier is turned on.  
When the source selector of the receiver/amplifier is set to CD function mode, the power of this unit is turned on.  
NOTES  
Abnormal operation may result if the power supply of the component(s) is interrupted. If this happens, you must start over  
again.  
Ensure that the COMPU LINK jacks of the each component are connected with the supplied COMPU LINK cord. Also, be sure to  
fully read the instructions for each component.  
When the power of the amplifier or receiver is switched off, this unit is also turned off automatically.  
13  
 
General informations  
Care and handling  
How to handle CDs  
When handling compact discs, do not touch the surface of the disc (reflective silver side the side without the label).  
Since compact discs are made of plastic, they are easily damaged. If the disc gets dirty, dusty, scratched or warped, the  
sound will not be picked up correctly and, in addition, such discs may cause the CD player to malfunction.  
Even on label side  
Do not damage the label side, stick paper to or use any adhesive on the surface.  
Storage  
Make sure that discs are kept in their cases. If discs are piled one on top of another without their protective cases, they  
can be damaged.  
Do not put discs in any location where they can be exposed to direct sunlight, or in any place where humidity or  
temperature is high. Avoid leaving discs in your car!  
Maintenance of discs  
When there are fingerprints or other dirt adhering to a disc, wipe the disc with a soft, dry cloth with a movement going  
from the center outwards.  
If difficult to clean, wipe the disc with a cloth moistened with water.  
Never use record cleaners, petrol, alcohol or any anti-static agents.  
14  
 
General informations  
English  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.  
Symptom  
Possible case  
Remedy  
Power plug is disconnected from the AC  
outlet.  
Connect the plug to the AC outlet.  
Load discs in the disc tray.  
The unit is not operative.  
Discs are not loaded.  
Load the disc with its label-side up in the disc  
tray.  
Disc is inserted upside down.  
Load the disc according to the groove of the  
disc tray.  
Disc is not loaded in the correct position.  
Moisture is condensed inside the unit.  
Playback is not possible.  
Leave the unit turned on until the moisture  
evaporates.  
Disc is not finalized.  
Disc is dirty.  
Finalize the disc.  
Wipe off the disc surface with a soft cloth.  
Replace the disc with a new one.  
Replace the disc with a new one.  
Replace both batteries.  
The reproduced sound includes  
noise.  
Disc is warped.  
The sound is intermittent.  
Disc is scratched.  
Batteries are exhausted.  
There is an obstacle between remote  
control unit and the remote sensor of the  
main unit.  
The remote control unit does not  
function.  
Remove the obstacle.  
Direct sunlight shines on the remote sensor  
of the main unit.  
Shade the unit from the direct sunlight.  
Specifications  
Accessories  
General  
AC power cord (1)  
Format:  
Compact disc digital audio  
AC plug adaptor (1)  
Audio cord (1)  
COMPU LINK cord (1)  
Remote control unit (RM-SXLFZ700J) (1)  
Batteries R6P(SUM-3)/AA(15F) (2)  
Signal detection system: Non-contact optical detection  
CD capacity:  
Sampling frequency:  
Power requirements:  
Power consumption:  
7 discs  
44.1 kHz  
AC 110 V 240 V  
9.0 W (POWER ON)  
, 50/60 Hz  
3.0 W (STANDBY mode)  
Dimensions (W x H x D): 435 mm x 102 mm x 448 mm  
* Designs and specifications are subject to change  
without notice.  
Mass:  
Approx. 5.5 kg  
Audio performance  
Frequency response:  
Dynamic range:  
2 Hz to 20 000 Hz ( 1 dB)  
98.0 dB (at 1 kHz)  
108.0 dB  
Signal to noise ratio:  
Total harmonic distortion: 0.002% (at 1 kHz)  
Wow and flutter:  
Output level:  
Less than measurable limit  
2.0 Vrms  
15  
 
VICTOR COMPANY OF JAPAN, LIMITED  
J
V
C
0502AOMCREJEM  
EN  
 

Insignia Clock Radio NS CLBT02 User Manual
Insignia Projection Television NS LCD32 09 User Manual
JBL Speaker GTO18T User Manual
JOBO MP3 Player GIGA Vu extreme User Manual
John Deere Lawn Mower 5045E User Manual
JVC Battery Charger BH VC20EG EK User Manual
JVC CRT Television 0803 KG II IM User Manual
JVC CRT Television 1204JGI II IM User Manual
Kalorik Work Light PPG 40741 User Manual
Klark Teknik Stereo Receiver DN530 User Manual