John Deere Lawn Mower 335C User Manual

335C, 435C, 437C, 530B, 535  
As Required  
• Drain water and sediment from fuel tank  
• Check and drain fuel/water separator  
Every 10 Hours or Daily  
• Check air filter restriction indicator and ducting  
• Check fire extinguisher  
• Check engine oil level  
• Lubricate grapple  
• Check air filter restriction indicator and ducting  
• Check engine coolant level  
• Lubricate ring gear and turntable bearings  
• Lubricate boom and cylinder pivots  
• Lubricate stabilizer and cylinder pins  
• Check operation of engine gauges and warning lights  
• Fill fuel tank  
• Check and drain final fuel filter water separator  
• Check hydraulic oil level  
• Check windshield washer fluid level  
• Check hydraulic filter restriction indicator  
• Check and clean shroud  
• Clean external surfaces and engine compartment  
• Check and clean radiator and oil cooler fins  
• Check swing drive gearbox oil level  
Every 50 Hours or weekly  
• Check fire extinguisher  
• Check pump mounting bolts torque  
• Check loader mounting bolts torque  
• Check engine mounting bolts torque  
• Check heel mounting bolts torque  
• Lubricate grapple rotator  
• Check boom and cylinder pin retainers (torque if required)  
• Check stabilizer and cylinder pin retainers torque  
Initial Service - 100 Hours**  
• Change engine break-in oil  
• Change engine oil filter  
• Change oil in the swing drive gearbox  
**Perform initial service once after the first 100 hours of operation  
Every 100 Hours  
• Check seat belt and belt support  
• Check battery water level  
• Visually inspect swing gearbox mounting cap screws (torque if required)  
Every 250 Hours  
• Change engine oil  
• Replace engine oil filter  
• Change hydraulic oil return filters  
• Change engine fuel filter  
• Take hydraulic oil analysis sample  
• Drain water and sediment from fuel tank  
• Take engine oil analysis sample--250 hours (recommended), 500 hours (maximum)  
Every 500 Hours  
• Change fuel/water separator filter element  
• Check turntable bearing mounting screws (torque if required)  
• Check engine fan belt tension  
• Change engine air filters  
• Take engine coolant analysis sample  
• Take diesel fuel analysis sample  
• Take engine oil analysis sample--250 hours (recommended), 500 hours (maximum)  
Every 1000 Hours  
• Change swing gearbox oil  
Every 2000 Hours  
• Change hydraulic oil  
• Clean case drain strainer element  
• Check engine belt and tensioner  
Every 4500 Hours  
• Change engine coolant and flush cooling system  
• Replace engine crankshaft dampener  
F392679 25SEP08  
F392680-28 | F392683-63  
 

Indesit Freezer SFR 167NF User Manual
Ingersoll Rand Marine Safety Devices 1 1 2002 User Manual
Init TV Video Accessories NT C3012 User Manual
Init TV Video Accessories NT WGM001 User Manual
JVC MP3 Player DR MX1S User Manual
Kathrein Satellite TV System UFD 545 User Manual
Kenmore Double Oven SF22 804 User Manual
Kenwood Car Stereo System DPX 502U User Manual
Keys Fitness Treadmill HT 740T User Manual
KitchenAid Double Oven KEMS308S User Manual