John Lewis Refrigerator JLBIUCL 01 User Manual

JLBIUCL 01  
built-in refrigerator  
Instruction manual  
 
Environmental Information  
When disposing of your appliance, use an authorised  
disposal site.  
Remove the plug and ensure that any locks or catches  
are removed, to prevent young children being trapped  
inside.  
The symbol  
on the product or on its packaging  
indicates that this product may not be treated as  
household waste. Instead it shall be handed over to  
the applicable collection point for the recycling of  
electrical and electronic equipment. By ensuring this  
product is disposed of correctly, you will help prevent  
potential negative consequences for the environment  
and human health, which could otherwise be caused  
by inappropriate waste handling of this product. For  
more detailed information about recycling of this  
product, please contact your local city office, your  
household waste disposal service or the shop where  
you purchased the product.  
3
 
Contents  
For the Installer  
For the User  
Installation  
6
Important Safety Information  
Description of the appliance  
2
5
Technical Specification  
Electrical Connection  
Positioning  
6
6
7
Operation  
13  
13  
13  
13  
13  
13  
14  
14  
Before using  
Start your appliance  
Temperature control  
Fresh food refrigeration  
Normal operating sounds  
Movable shelves  
Door Reversal  
Building In  
8
9
Guide to use the Instruction  
Manual  
The following symbols will be found in the text to  
guide you throughout the instructions:  
Positioning the door shelves  
Hints andTips  
15  
Maintenance and Cleaning  
Internal cleaning  
16  
16  
16  
16  
16  
16  
Safety instructions  
Hints and tips  
When the appliance is not in use  
Periodic cleaning  
Defrosting  
Environmental information  
Changing the light bulb  
This appliance complies with the following  
E.E.C. Directives:  
Something NotWorking  
Repairs - After Sales Service  
17  
18  
* 73/23 - 90/683 (LowVoltage Directive);  
* 93/68 (General Directive);  
* 87/308 (Radio Interference Suppression);  
* 89/336 (Electromagnetic Compatibility  
Directive)  
and subsequent modifications.  
4
 
Description of the Appliance  
1 Dairy compartments  
2 Movable storage shelf  
4
1
3 Bottle storage shelf  
4 Interior light  
5
5 Storage shelves  
2
6 Salad crispers  
3
6
5
 
Installation  
It is dangerous to alter the specifications or  
attempt to modify this product in any way.  
Any electrical work required to install this  
appliance should be carried out by a qualified  
electrician or competent person.  
Care must be taken to ensure that the  
appliance does not stand on the electrical  
supply cable.  
Technical Data  
Heating elements rating  
Dimensions of recess  
Supply voltage (50 Hz)  
Connected load,  
Fridge light  
220-240V  
Height  
Width  
Depth  
820 mm  
600 mm  
550 mm  
70W  
15W  
Dimensions of the appliance cavity  
Height  
Width  
Depth  
815 mm  
596 mm  
550 mm  
Fridge Gross capacity  
Fridge Net capacity  
142 litres  
140 litres  
GREEN & YELLOW  
13 AMP. FUSE  
Electrical connection  
Any electrical work required to install this appliance  
should be carried out by a qualified electrician or  
competent person.  
WARNING:THIS APPLIANCE MUST BE  
EARTHED.  
The manufacturer declines any liability should this  
safety measure not be observed.  
BROWN  
BLUE  
CORD CLAMP  
D207  
If the plug that is fitted to your appliance is not suitable  
for your socket outlet, it must be cut off and the  
appropriate plug fitted.  
1. Connect the Green andYellow (earth) wire to the  
terminal in the plug which is marked with the letter  
Remove the fuse from the cut off plug.  
«E» or the earth symbol  
yellow.  
or coloured green and  
The cut off plug should then be disposed of to prevent  
the hazard of shocks in case it should be plugged into a  
13amp socket in another part of your home.  
2. Connect the blue (neutral) wire to the terminal in the  
plug which is marked with the letter «N» or coloured  
black.  
3. Connect the brown (live) wire to the terminal in the  
plug which is marked with the letter «L» or coloured  
red.  
Important  
The wires in the mains lead are coloured in accordance  
with the following code:  
4. Upon completion there must be no cut, or stray  
strands of wire present and the cord clamp must be  
secure over the outer sheath.The plug moulded onto  
the lead incorporates a fuse. For replacement, use a  
13amp BSI362 fuse. Only ASTA or BSI approved fuses  
should be used.  
Green andYellow  
Blue  
- Earth  
- Neutral  
- Live  
Brown  
If you fit your own plug, the colours of the wires in the  
mains lead of your appliance may not correspond with  
the markings identifying the terminals in your plug,  
proceed as follows:  
The plug must not be used if the fuse cover/carrier is  
lost.The cover/carrier is indicated by the coloured insert  
at the base of the plug.  
A replacement cover/carrier must be obtained from your  
local Service Force Centre.  
6
 
Important  
Warning  
IFYOU ARE DISCARDING AN OLD APPLIANCE  
THAT HAS A LOCK OR CATCH ONTHE DOOR,  
YOU MUST ENSURETHAT IT IS MADE  
UNUSABLETO PREVENTYOUNG CHILDREN  
BEINGTRAPPED INSIDE.  
It must be possible to disconnect the appliance from the  
mains power supply; the plug must therefore be easily  
accessible after installation.  
Depending upon the position which you choose for  
your appliance, you may wish to reverse the way in  
which the door opens.To do this, refer to  
instructions on “Door reversal directions”.  
Positioning  
This appliance should only be installed at a location  
where the ambient temperature corresponds to the  
climate classification indicated on the rating plate,  
which is located at the left on the inside of the  
appliance.  
The following table shows which ambient  
temperature is correct for each climate  
classification:  
SN +10°C to + 32°C  
N
+16°C to + 32°C  
ST +18°C to + 38°C  
+18°C to + 43°C  
T
It should be located in a dry atmosphere, out of  
direct sunlight and away from extreme temperature  
e.g. not next to a boiler or radiator, or in a very cold  
room e.g. an outhouse . If these temperatures are  
exceeded i.e. colder or warmer, then the appliance  
may not operate correctly.  
For building-in and door reversibility, if necessary ,  
refer to the relevant instructions in the following  
pages.  
7
 
Door Reversal  
To reverse the opening direction of the door,  
proceed as shown in the figures:  
6
4
6
1
7
8
5
6
2
3
1
2
Warning  
6
10  
After completion of the door reversing  
operation, check that the door gasket adheres  
to the cabinet. If the ambient temperature is  
cold (i.e. inWinter), the gasket may not fit  
perfectly to the cabinet. In that case, wait for  
the natural fitting of the gasket or accelerate  
this process by heating up the part involved  
with a normal hairdryer on a low setting.  
13  
9
6
12  
11  
3
8
 
Building In  
Before carrying out any work, remove the plug from  
the power socket.  
Building in the appliance  
under a worktop  
The dimensions of the recessed installation area  
must correspond with those indicated in the figure.  
Grid preparation  
Left door opening:  
Remove the left side (A) of the grid cutting it from  
the rear (see figure).  
A
B
DO013  
Installation kit  
DO002/2  
1xB  
2xC  
Right door opening:  
Remove the right side (B) of the grid cutting it from  
the rear (see figure).  
1xA  
1xK  
To position the grid on the appliance proceed as  
follows:  
Apply the grid to the base of the appliance by  
pushing on to the clasps (a) until they click.  
18xI  
2xG  
2xL  
2xD  
2xF  
2xE  
1
a
1. Two cabinet securing brackets are supplied with  
the installation pack.They need to be assembled  
onto the cabinet prior to cabinet being pushed  
into the Kitchen aperture.  
a
- To fit these brackets remove the two screws at  
the top left and right hand front corners of the  
cabinet.  
DO001  
- Position the two brackets as shown in the figure  
and replace the two securing screws.  
2
Left hand bracket  
Right hand bracket  
9
 
2. Push the appliance into place.The plug socket  
necessary for connection of the appliance to the  
electricity supply should be positioned, so that the  
plug is not placed in the recess.  
4. The joint cover (B) is to be assembled after having  
installed the appliance in the recess.  
3. To adjust the height proceed as follows:  
- Loosen or tighten the two front feet.  
- The rear feet are adjusted by turning the screw  
in the front kick plate to the left or right.  
1
B
4
5. Screw appliance into place and retain the cabinet  
with screws (I) through the securing brackets into  
the worktop or adjacent woodwork as necessary.  
+
-
-
+
E
3
If necessary, pads (E) are supplied for the rear feet to  
make sliding the appliance in and out of the recess  
easier.To fit the pads, press them onto the rear feet.  
If required, the dimensions of these pads can be  
reduced by breaking them where marked.  
I
5
6. To mount the furniture door proceed as shown in  
the figures:  
E
II52  
2
1
a
1
0
C
4
3
b
6
10  
 
I
F
27,5 cm  
55 cm  
27,5 cm  
10  
7
1
2
45°  
a
b
c
3
C
click  
11  
click  
8
1
Upper part of kitchen  
furniturepanel
a
I
=
=
=
2
=
10  
12  
c
b
9
11  
 
Fitting the plinth  
Important  
For the efficient operation of the appliance, it  
is important that the original ventilation grid is  
used.  
8 mm  
I
• For an opening height dimension A=820 mm and a  
plinth height dimension a=100 mm, the plinth may  
be fitted without adjustments.The same applies to  
an opening height dimension B=870 mm and a  
plinth height dimension b=150 mm.  
F
K
• For plinth heights greater than a=100 mm, b=150  
mm, a cut should be made in the plinth, 580 mm  
wide, in the centre of the appliance position,  
leaving a remaining height of a=100 mm, b=150  
mm.  
G
13  
• Attach plinth to the kitchen units.  
7. Refit the covering strip (A).  
A
25  
DO008  
Important  
The plinth must be positioned at a minimun  
distance of 25 mm from the door.  
14  
L
90°  
115°  
L
15  
12  
 
OPERATION  
Before using  
Remove all securing tapes.Wash inside the appliance  
with lukewarm water and bicarbonate of soda (5 ml  
to 0.5 litre of water).  
Important  
During prolonged periods of abnormally hot  
weather, if the thermostat is set on too high a  
number, the cooling system may operate  
Do not use soap or detergent as the smell  
may linger. Dry thoroughly.  
continuously and the fridge cooling plate may not  
defrost.Turning the knob to a lower number will  
cause the automatic defrosting to resume.  
Start your appliance  
Allow the appliance to stand for 2 hours after  
installation.  
Fresh food refrigeration  
Insert the plug into the wall socket.The pilot light  
(A) will illuminate to show that the appliance is on.  
To obtain the best performance, do not store warm  
food or evaporating liquids in the refrigerator; do  
cover or wrap the food, particularly if it has a strong  
flavour.  
Turn the thermostat control (B) to a midway setting.  
Leave the appliance for approximately 4 hours for  
the correct temperature to be reached before  
placing food inside.  
Do not cover the shelves with any protective  
material, such as paper, cardboard or plastic, which  
may obstruct the air circulation through them.  
To switch off the appliance turn the thermostat  
control to position “O” .  
To help you use your refrigerator correctly, here are  
some more useful hints:  
Temperature control  
The temperature inside the refrigerator is regulated  
by a thermostat control knob with 6 temperature  
positions and one «OFF» (O) position.  
Raw meat (beef, pork, lamb & wild fowl): wrap in  
polythene bags and place on top of the salad  
crispers.  
Meat can only be stored safely in this way for  
one or two days at the most.  
To operate the refrigerator proceed as follows:  
Position 1 = minimum coldness  
Fruit & vegetables: these should be thoroughly  
cleaned and placed in the bottom salad crispers.  
Position 6 = maximum coldness  
Turn the thermostat control knob beyond the «O»  
position.  
Butter & cheese: these should be placed in special  
airtight containers or wrapped in aluminium foil or  
polythene bags to exclude as much air as possible.  
When you first start the refrigerator, we suggest  
that you turn the thermostat control to a medium  
setting. For easier turning of this control, use a small  
coin.The internal temperature of the refrigerator is  
automatically adjusted by the thermostat to ensure  
safe food storage.  
Milk bottles: these should have a cap and should  
be stored in the bottle rack on the door.  
Normal Operating Sounds  
You may hear faint gurgling or bubbling sounds  
when the refrigerant is pumped through the coils  
or tubing at the rear, to the cooling  
However, if the appliance is working in unfavourable  
room conditions such as  
- poor ventilation,  
plate/evaporator or to the fixed freezer shelves.  
- high temperature,  
- frequent door openings,  
• When the compressor is on, the refrigerant is  
being pumped round, and you will hear a whirring  
sound or pulsating noise from the compressor.  
it may be necessary to select a more suitable  
setting.  
• A thermostat controls the compressor, and you  
will hear a faint ’click’ when the thermostat cuts  
in and out.  
13  
 
Movable shelves  
The walls of the refrigerator have runners so that  
the shelves can be positioned as desired .  
For better use of space, the front half-shelves can lie  
over the rear ones.  
D338  
Positioning the door shelves  
To permit storage of food packages of various sizes,  
the door shelves can be adjusted in height.To make  
these adjustments proceed as follows:  
Remove the top door shelf by pulling them in the  
direction of the arrows, then gradually slide the shelf  
sideways until it comes off.Then reposition door  
shelves as required.  
CP1OEM  
For more thorough cleaning, the top door shelf and  
the bottle shelf can be removed by pulling them in  
the direction of the arrows, then refitting them in  
position.  
C P 2 O E M  
14  
 
Hints andTips  
Food Storage  
Energy Saving Advice  
To obtain the best results from your appliance,  
neither hot foods nor liquids which may  
evaporate, should be placed in the larder  
compartment.  
• Do not install the cabinet close to sources of  
heat, i.e. boiler or radiator.  
• Locate the appliance in a cool well ventilated  
room and make sure that the air openings of the  
cabinet are not obstructed.  
• Keep the time between buying chilled food and  
placing it in your fridge as short as possible.  
• Avoid unnecessary frosting in the cabinet by  
packing all foodstuffs into airtight packages  
before placing them in the freezer.  
• Do not push food together too much, try to  
allow air to circulate around each item.  
• Do not store food uncovered.  
• Always leave warm food to cool down to room  
temperature before placing in the fridge or  
freezer.  
• Remove suspect food from your refrigerator and  
clean, refer to ‘Maintenance and Cleaning’.  
• Thaw frozen food in the fridge.This will ensure  
safer defrosting of foods and reduce the work of  
the refrigeration unit.  
• Keep the refrigerator door closed as much as  
possible.  
• Do not push food together too much, try to  
allow air to circulate around each item.  
Try to avoid keeping the door open for long  
periods, or opening the door too frequently as  
warm air will enter the cabinet, and cause the  
compressor to switch on unnecessarily often.  
• Cool cooked food as quickly as possible but do  
NOT place in the refrigerator until cool. (Leave  
food in a cool place in order that it can then be  
placed in the refrigerator as soon as possible).  
• Ensure there are no obstructions preventing the  
door from closing properly.  
• Do NOT mix raw and cooked meat, they must  
be in separate containers.Take care not to let the  
meat juices drip onto other food. If the meat  
does drip, remove everything and clean  
thoroughly.  
In the Event of a Power  
Failure  
If there is a power failure during the storage of  
frozen foods, keep the door closed. If the  
temperature within your freezer should rise do not  
refreeze the food without checking it’s condition.  
The following guidelines should assist you.  
• Do not store food uncovered.  
• Remove suspect food from your refrigerator and  
clean the interior (see “Maintenance and  
Cleaning”).  
Ice Cream:  
Once thawed should be discarded.  
Fruit andVegetables:  
If soft should be cooked and used up.  
Bread and Cakes:  
• Never allow spillages to dry and harden.  
• Store eggs in the egg rack provided in the  
refrigerator door. Discard any broken or chipped  
eggs.  
Can be refrozen without danger.  
Shellfish:  
Should be refrigerated and used up quickly.  
Cooked Dishes:  
i.e. casseroles, should be refrigerated and used up.  
Large Pieces of Meat:  
• Regularly check the refrigerator door seal to  
ensure that it is clean and free from debris.  
• Always wash your hands with soapy water and  
dry them with a clean towel before handling  
food.  
• Keep work surfaces clean and avoid cross  
contamination by not using the same work  
surface or knife, without washing them  
thoroughly in between.  
Can be re-frozen providing there are ice crystals  
remaining within them.  
Small Joints:  
Should be cooked and then re-frozen as cooked  
dishes.  
Chicken:  
Should be cooked and re-frozen as a fresh dish.  
15  
 
Maintenance and Cleaning  
Before any maintenance or cleaning work is carried  
out, DISCONNECT the appliance from the  
ELECTRICITY supply.  
Defrosting  
The refrigerator automatically defrosts every time  
the compressor stops.The water is discharged, via  
the pipe, into a tray located below the appliance,  
where it evaporates.  
Internal cleaning  
Clean the inside and accessories with warm water  
and bicarbonate of soda (5ml to 0.5 litre of water).  
Rinse and dry thoroughly.  
Important  
To avoid defrost water overflowing and  
dripping onto the food in the fridge,  
periodically clean the water discharge hole (F)  
situated under the salad drawers. Use the  
special cleaner provided (P) which you will  
find already inserted into the discharge hole.  
NEVER USE DETERGENTS,  
ABRASIVE POWDERS, HIGHLY  
PERFUMED CLEANING PRODUCTS  
ORWAX POLISHES,TO CLEANTHE  
INTERIOR ASTHESEWILL DAMAGE  
THE SURFACE AND LEAVE A  
STRONG ODOUR.  
When the appliance is not in  
use  
When the appliance is not in use for long periods,  
disconnect from the electricity supply, empty all  
foods and clean the appliance, leaving the doors ajar  
to prevent unpleasant smells.  
P
F
Periodic cleaning  
S.I.011  
The appliance is equipped with a ventilation grid.  
Keep clean to guarantee good ventilation and good  
working order of the appliance.  
An accumulation of dust will affect the performance  
of the appliance and cause excessive electricity  
consumption.  
The structure of the appliance permits cleaning of  
the rear zone close to the wall, using a vacuum  
cleaner.  
1. Remove the plinth (1), then the ventilation grid  
(2);  
Changing the light bulb  
Should the interior light fail to work, first switch off  
the appliance and disconnect from the electricity  
supply, then replace the bulb as follows:  
1. Unscrew the light cover and then pull it outward  
by pressing as shown in the figure. Unscrew the  
bulb and replace it with one of the same power  
(the maximum power is shown on the light  
diffuser) available from your nearest Service Force  
centre.  
2. Carefully pull the air deflector out (3).  
2. Replace the light cover by sliding it into its original  
position and replacing the screw.  
3
2
1
S.I.013  
D411  
16  
 
Something not working  
Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation a charge will be made, even if the appliance is under guarantee.  
Before contacting your local Service Force Centre, check the following points:  
SOLUTION  
SYMPTOM  
Check there is power at the socket.  
4 No power to the appliance  
Check there is not a power cut by checking the  
household lights.  
Check the fuse has not blown.  
4 The light does not come on  
Ensure that the bulb is correctly fitted.  
Replace the bulb if it has blown.  
Check the door light switch is not jammed.  
Check the thermostat control knob is turned  
to the correct setting relative to ambient  
conditions.  
4 The temperature in the fridge or freezer  
section is too high  
Check the ambient temperature is within the  
appliance’s operating limits, please refer to the  
installation section in this instruction book.  
Relocate the appliance if necessary.  
Has door just been opened? If so leave for a  
few minutes to allow the air pressure to  
equalise.  
4 The refrigerator door will not open  
4 The compressor runs continously  
Adjust the thermostat control knob to give  
correct temperature control. See “Setting the  
temperature”.  
Check that the doors are closed.  
Large quantities of food have recently been  
placed in the cabinet and/or door is frequently  
opened.  
Check that air ventilation is not obstructed.  
Ensure the doors are not left open.  
4 Excessive frost and ice has built up  
Check that nothing is preventing the doors  
from closing.  
Is the door gasket intact and clean.  
4 Noise  
Refer to normal operating sounds.  
Check the drain hole is not blocked. (see  
Maintenance and Cleaning).  
4 Water under the salad bin  
17  
 
Repairs - After Sales Service  
If your appliance is not performing satisfactorily;  
consult the fault finding guide within this instruction  
Spare parts  
This product should be serviced by an authorised  
service engineer, and only genuine spare parts should  
be used.  
book (Something not working). In the event of a  
fault occurring which you cannot resolve yourself  
from advice given within this instruction manual  
your first step is to contact our extended warranty  
administrators on 0870 0107887 who will give you  
details for your local Service Force Repair Agent.  
Under no circumstances should you attempt to  
repair the appliance yourself.  
Repairs carried out by inexperienced persons may  
cause injury or serious malfunctioning. Contact our  
extended warranty administrators on 0870  
0107887 who will give you details for your local  
Service Force Repair Agent.  
When contacting the repair agent, please quote the  
model (Mod.) and serial number (S.N.), both of  
which are shown on the rating plate located on the  
side of the oven door (see picture).  
So that you always have these numbers at hand, we  
recommend you to make a note of them here:  
Always insist on genuine spare parts.  
Mod. : . . . . . . . . . . . . . . . . . .  
PNC : . . . . . . . . . . . . . . . . . .  
S.N. : . . . . . . . . . . . . . . . . . . .  
Your applaince is covered by a 3 year parts and  
labour guarantee (see separate details given at point  
of sale). Please retain your purchase receipt safely  
for the service engineer to verify the purchase  
details.  
Manufacturer  
Model  
Energy Efficiency  
class  
Energy Consumption  
kWh/year  
Fresh food volume l  
18  
 
 
John Lewis Partnership  
171Victoria Street  
London SW1E 5NN  
09/06  
2222 676-24  
 

Insignia Flat Panel Television NS LCD15 User Manual
JAI Security Camera CV L105 User Manual
JBL Portable Speaker EON15 G2 User Manual
Jenn Air Refrigerator JRS207 User Manual
Jensen Speaker XS1010 User Manual
Kalorik Iron USK SIT 25803 User Manual
Kambrook Toaster KT97 User Manual
Kenmore Dishwasher 15791 User Manual
Kenmore Sewing Machine 38512314 User Manual
Kenwood CD Player Z828MP User Manual