Jura Capresso Coffeemaker 13637 User Manual

IMPRESSA XJ9 Professional Instructions for Use  
E
For your safety: read and understand manual before use.  
K
JURA Type 683  
 
Table of contents  
5
Maintenance  
37  
Rinsing the machine...................................................................................................................................38  
Rinsing the cappuccino frother ................................................................................................................38  
Cleaning the cappuccino frother..............................................................................................................39  
Dismantling and rinsing the cappuccino frother..................................................................................40  
Inserting and activating the filter.............................................................................................................40  
Changing the filter.......................................................................................................................................41  
Cleaning the machine ................................................................................................................................42  
Descaling the machine ..............................................................................................................................44  
Cleaning the bean container.....................................................................................................................46  
Descaling the water tank...........................................................................................................................47  
6
7
8
Display messages  
Troubleshooting  
48  
49  
51  
Transport and environmentally friendly disposal  
Transport / Emptying the system..............................................................................................................51  
Disposal..........................................................................................................................................................51  
9
Technical data  
52  
53  
56  
10 Index  
11 JURA contact details / Legal information  
Symbol description  
Warnings  
This is the safety alert symbol. lt is used to alert you to potential personal injury  
hazards. Obey all safety messages that follow this symbol to avoid possible injury  
or death.  
J
J DANGER  
DANGER indicates a hazardous situation which, if not avoided, will result in death  
or serious injury.  
WARNING indicates a hazardous situation which, if not avoided, could result in  
death or serious injury.  
J WARNING  
CAUTION, used with the safety alert symbol, indicates a hazardous situation  
which, if not avoided, could result in minor or moderate injury.  
NOTICE is used to address practices not related to personal injury.  
J CAUTION  
NOTICE  
Symbols used  
Prompt to take action. This symbol means that you are being prompted to  
perform some action.  
T
Information and tips to make it even easier to use your IMPRESSA.  
E
‘Espresso’  
Display message  
3
 
IMPORTANT SAFEGUARDS  
IMPORTANT SAFEGUARDS  
Fol l ow t he basi c saf et y  
precautions  
When using electrical appliances, basic safet y precautions shall  
always be followed, to reduce the risk of fire, electric shock, and/or  
injury to persons, including thefollowing:  
Z
Z
Z
Read al l i n st r u ct i o n s.  
Do not touch hot surfaces. Use handles or knobs.  
To pr ot ect agai nst f i r e, el ect r i c shock and i nj ur y t o per sons, do  
not immerse power cord, plugs, or body of machine in water  
or other liquid.  
Z
Z
Closesupervision isnecessary when any applianceisused by  
or near children.  
Unplug from outlet when not in use and before cleaning.  
Allow to cool before putting on or t aking off part s, and before  
cleaning the appliance.  
Z
Z
Do not operate any appliance with a damaged cord or plug or  
after the appliance malfunctions, or hasbeen damaged in any  
manner. Return appliance to the nearest authorized service  
facility for examination, repair or adjustment.  
The use of an accessory at t achment not recommended by t he  
appliance manufacturer may result in fire, electric shock, or  
injury to persons.  
Z
Z
Do not use outdoors.  
Do not let the cord hang over the edge of a table or counter,  
or touch hot surfaces.  
Z
Z
Do not place on or near a hot gas or electric burner, or in a  
heated oven.  
Always att ach plug to appliance first, then plug cord into the  
wall outlet. To disconnect, turn any control to ‘OFF’ then  
removeplug from wall outlet.  
Z
Z
Do not use appliance for other than intended use.  
Use extreme caution when dispensing hot steam, hot water  
or hot coffee.  
Z
For househol d use onl y.  
SAVE THESE INSTRUCTIONS.  
Pass t hem on t o any subsequent user.  
4
 
IMPORTANT SAFEGUARDS  
Intended use  
The appliance is designed and intended for household use only. It  
shall only be used for coffee preparation and to heat milk and water,  
according to these instructions. Use for any other purpose will be  
deemed improper. JURA Elektroapparate AG cannot accept any  
responsibility for theconsequencesof improper use.  
People, i ncludi ng chi ldren, who  
Z
do not havethephysical, sensory or mental capabilitiesto use  
theappliancesafely or  
Z
are inexperienced or lack knowledge in how to use the appli-  
ance safely  
must besupervised by aresponsibleperson when using it, or must  
be instructed in how to use it correctly.  
Speci al pow er cor d set  
instructions  
Z
Z
The power cord is provided to reduce t he risk result ing from  
becoming entangled in or tripping over a long cord.  
The cord shall be arranged so t hat it will not drape over t he  
counter top or table top where it can be pulled on by children  
or tripped over.  
Z
Z
Z
This appliance has a 3-pin grounded plug. As a safet y feat ure,  
thisplug will fit in apolarized outlet only oneway.  
If theplug doesnot fit fully in theoutlet, reversetheplug. If it  
still does not fit, cont act a qualified electrician.  
Do not modify the plug in any way or attempt to defeat this  
safet y feature.  
Do NOT use extension cords.  
If the user choosesto use an extension cord,  
Z
Z
Z
the marked electrical rating of the extension cord shall be at  
least asgreat astheelectrical rating of theappliance, and  
if the appliance is of the grounded type, the extension cord  
shall be a grounding t ype 3-wire cord, and  
thelonger cordshall bearrangedsothat it will not drapeover  
thecounter top or tabletop whereit can bepulled on by chil-  
dren or tripped over.  
J WARNING  
To r educe t he r i sk of f i r e or el ect r i c shock, DO NOT r em ove any ser-  
vice covers. DO NOT modify the appliance in any way that is not  
described in theseinstructions. NOuser serviceablepartsincluded.  
Rep ai r M UST b e d o n e by au t h o r i zed p er so n n el o n l y.  
5
 
IMPORTANT SAFEGUARDS  
In the event of signs of damage, for example if there is a smell of  
burning, unplug the machine immediately from outlet and contact  
JURAcustomer service.  
J CAUTION  
Thisapplianceisfor household use. Any servicing other than clean-  
ing and user maintenanceshall beperformed by an authorized ser-  
vice representative:  
Z
Z
Do not immerse base in water or try to disassemble.  
Do not put the appliance or any individual parts in the dish-  
washer.  
Z
Z
Z
Check vol t age t o be sure t hat t he vol t age i ndi cat ed on t he  
name plate complieswith your voltage.  
Never use warm or hot water to fill the water container. Use  
cold water only.  
Keep your hands and t he cord away f rom hot par t s of t he  
appliance during operation.  
There is a risk of scalds or burns on t he spout s and t he cappuccino  
frother / nozzle.  
Z
Z
Keep chi l dren away.  
Do not touch any hot parts. Use the handles or knobs pro-  
vided.  
Z
Ensur e t hat t he cappucci no f r ot her / nozzl e i s cor r ect l y f i t t ed  
and clean. If incorrectly fitted or if they become blocked, the  
cappuccino frother or its parts might come off.  
NOTICE  
Z
Z
Z
Never clean with scouring powders or hard implements.  
Ensur e t hat t he vent i l at i on sl ot s ar e not cover ed.  
Never pull out the drip tray during the brewing process. Only  
pull the drip tray when the display instructs you or when the  
appliance is ready for use.  
NEVERDO  
(or you will void your  
warranty protection):  
Z
Z
Never fill instant coffee, chocolate mix etc. into the bean con-  
tainerorgroundcoffeefunnel (fillerfunnel forgroundcoffee).  
It will damage the functioning of the brewing chamber.  
Never fill sugar coated coffee beans into the bean container.  
In case of doubt, call your dealer.  
6
 
IMPORTANT SAFEGUARDS  
Z
Z
Never fill anything other than coffee beans into the bean con-  
tainer(nochocolate,norice,nonuts,nospices,nothingother  
than roasted coffeebeans).  
Never fill frozen beans into the bean container. If you store  
beansin the freezer, let them thaw 3 to 4 hoursbefore filling  
them into thebean container.  
Z
Z
Z
Never fill anything but fresh, cold and clean water into the  
water tank, except when decalcifying.  
Never use mineral or carbonated water. You can use tap water,  
bottled water, spring water and reverse osmosiswater.  
Never do anything with the machine which is not described in  
theseinstructions. In caseof doubt, call your dealer.  
7
 
Control elements  
Control elements  
8
1
2
9
10  
3
11  
12  
13  
4
J HOT  
J HOT  
J HOT  
5
6
7
1
Bean container with aroma preservation  
cover  
8
9
Filler funnel for ground coffee  
Storage compartment cover  
2
3
4
5
6
7
Water tank cover  
10 Grinder adjustment switch  
11 Measuring spoon for ground coffee  
12 Hot-water nozzle  
Water tank  
Height-adjustable cappuccino frother  
Coffee grounds container  
Drip tray  
13 Height- and width-adjustable coffee spout  
Cup platform  
8
 
Control elements  
1
2
3
4
5
Top of the machine  
Front  
1
Q
g
O
On/Off button  
Rotary Switch  
4
5
Display  
Buttons (button function depends on  
what is shown in the display)  
2
3
P button (programming)  
1
3
2
Back of the machine  
1
Power switch  
Power cord  
3
Port (under cover)  
2
9
 
1
Preparing and using for the first time  
1
Preparing and using for the first time  
Visit us on the Internet.  
JURA on the Internet  
up-to-date information on your IMPRESSA and on every aspect of  
coffee.  
The following settings can only be made by the JURA service techni-  
cian:  
Settings by the JURA  
service technician  
Setting the filter capacity  
U
You can also obtain the following optional accessories for your  
IMPRESSA from your JURA service partner:  
Coffee grounds disposal function set  
U
Drip drain set  
U
Permanent water connection kit  
U
Payment system and other accessories  
U
Setting up the machine  
NOTICE If the machine is not lifted properly, it may be damaged.  
T
T
Do not lift the machine by the bean container.  
Only lift the machine by gripping it underneath, in the recesses  
on the left and right sides of the machine.  
When setting up your IMPRESSA, please note the following:  
Place the IMPRESSA on a horizontal surface that is not sensi-  
U
tive to water.  
Choose a spot for your IMPRESSA which protects the machine  
U
against overheating. Ensure that the ventilation slots are not  
covered.  
10  
 
1
Preparing and using for the first time  
Daily maintenance of the machine and hygiene when handling milk,  
coffee and water are key to a perfect coffee result in the cup every  
time. You should therefore change the water daily.  
Filling the water tank  
NOTICE Milk, sparkling mineral water or other liquids can damage the water  
tank or the machine.  
T
Only fill the water tank with fresh, cold water.  
T Open the water tank cover.  
T Remove the water tank and rinse it with cold water.  
T Fill the water tank with fresh, cold water and reinsert the  
tank.  
T Close the water tank cover.  
The bean container has an aroma preservation cover. This will ensure  
that your coffee beans retain their aroma for longer.  
Filling the bean container  
NOTICE Coffee beans which have been treated with additives (e.g. sugar),  
ground coffee or freeze-dried coffee will damage the grinder.  
T
Only use untreated coffee beans to fill the bean container.  
T Remove the aroma preservation cover.  
T Remove any dirt or foreign objects from inside the bean  
container.  
T Fill the bean container with coffee beans and close the  
aroma preservation cover.  
11  
 
1
Preparing and using for the first time  
First-time use  
J WARNING  
If the machine is operated with a defective power cord, there is a  
danger of potentially fatal electric shock.  
T
T
Never use a machine which is damaged.  
Never use a machine which has a defective power cord.  
E
The water volume is given as standard in ‘oz’. You can change  
this setting to ‘ml’ in programming mode (see Chapter 4 ‘Per-  
manent settings in programming mode – Unit for amount of  
water’).  
When using the machine for the first time, you can choose whether  
you want to operate IMPRESSA with or without the CLEARYL Pro  
Blue filter cartridge. If the water hardness is 10° dH or more, we rec-  
ommend using the filter cartridge. If you do not know the hardness  
of your water, you can find this out first (see Chapter 1 ‘Preparing and  
using for the first time – Determining the water hardness’).  
Precondition: The water tank and bean container have been filled.  
T Insert the power plug into a power socket.  
3
T Switch on the IMPRESSA using the power switch on the back  
of the machine.  
Q
T Press the On/Off button to switch the IMPRESSA on.  
The display shows the languages you can choose from.  
E
E
To display more languages, press the ‘Next’ button (bottom  
right).  
T Press the button that corresponds to the language you want,  
e.g. ‘English’.  
‘Saved’ appears briefly on the display to confirm the setting.  
‘Filter’  
Now decide whether you want to operate your IMPRESSA with  
or without a CLEARYL Pro Blue filter cartridge.  
12  
 
1
Preparing and using for the first time  
Activating the filter  
NOTICE  
Milk, sparkling mineral water or other liquids can damage the water  
tank or the machine.  
T
Only fill the water tank with fresh, cold water.  
T Press the ‘Active’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Insert filter’  
T Remove and empty the water tank.  
T Open the filter holder and insert the filter cartridge into the  
water tank, exerting slight pressure.  
T Close the filter holder. It will click into place audibly.  
E
After two months, the filter will cease to work. Set the date on  
the date plate on the filter holder in the water tank.  
T Fill the water tank with fresh, cold water and reinsert the  
tank.  
T Place a receptacle under the cappuccino frother, the coffee  
spout and the hot-water nozzle.  
T Press the ‘Next’ button.  
‘Filter is being rinsed.’, water flows out of the hot-water noz-  
zle.  
E
E
You can interrupt rinsing of the filter at any time by pressing  
any button. Press the Rotary Switch k to continue rinsing of  
the filter.  
The water may be slightly discolored. This is not harmful to  
health and does not affect the taste.  
Rinsing of the filter stops automatically.  
‘System is filling.’, the system fills up with water. Water flows  
out of the cappuccino frother and the hot-water nozzle. The  
operation stops automatically.  
‘Welcome to JURA’  
‘Machine is rinsing.’, the machine rinses. The operation stops  
automatically. ‘Please select product:’ appears on the display.  
Your IMPRESSA is ready for use.  
E
The display shows the products you can prepare.  
13  
 
1
Preparing and using for the first time  
Deactivating the filter  
NOTICE Milk, sparkling mineral water or other liquids can damage the water  
tank or the machine.  
T
Only fill the water tank with fresh, cold water.  
T Press the ‘Inactive’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Water hardness’  
E
If you do not know the hardness of your water, you must find  
this out first (see Chapter 1 ‘Preparing and using for the first  
time – Determining the water hardness’).  
T Press the ‘ < ’ or ‘ > ’ button to set the water hardness.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Welcome to JURA’  
‘Please press the Rotary Switch.’  
T Place a receptacle under the cappuccino frother and another  
under the hot-water nozzle.  
k
T Press the Rotary Switch.  
‘System is filling.’, the system fills up with water. Water flows  
out of the cappuccino frother and the hot-water nozzle. The  
operation stops automatically.  
‘Welcome to JURA’ appears on the display.  
‘Machine is heating.’  
‘Please press the Rotary Switch.’, the Rotary Switch lights up.  
T Place a receptacle under the coffee spout.  
T Press the Rotary Switch.  
k
E
‘Machine is rinsing.’, the machine rinses. The operation stops  
automatically. ‘Please select product:’ appears on the display.  
Your IMPRESSA is ready for use.  
The display shows the products you can prepare.  
14  
 
1
Preparing and using for the first time  
You can find out what the water hardness is by using the Aquadur®  
test strip supplied as standard.  
Determining the water  
hardness  
T Hold the test strip briefly (for 1 second) under flowing water.  
Shake off the water.  
T Wait for about one minute.  
T You will then be able to read the degree of water hardness  
from the discoloration of the Aquadur® test strip and the  
description on the packaging.  
You can now adjust the water hardness.  
The water hardness can be adjusted on a continuous scale between  
1° dH and 30° dH.  
Level  
Display German Degrees of general Parts per  
Indicator Strip number  
Degree (°dH)  
hardness (°dGH)  
million (ppm) of ‘reddish’ fields  
Not active  
Very soft water  
Soft water  
<3  
<3  
< 53.4  
> 71  
None  
> 4  
> 4  
1
Hard water  
> 8.4  
> 14  
> 8.4  
> 14  
> 150  
> 250  
2
3
Very hard water  
Adjusting the grinder  
NOTICE If you adjust the consistency of grind when the grinder is not oper-  
ating, the grinder adjustment switch could be damaged.  
T
Only adjust the consistency of grind when the grinder is run-  
ning.  
You can adjust the grinder on a continuous scale to suit the degree  
of roast of your coffee.  
The consistency of grind is correct if the coffee flows regularly from  
the coffee spout. In addition a fine, thick crema forms.  
Example: Proceed as follows to change the consistency of grind  
during the preparation of an espresso.  
T Open the storage compartment cover.  
T Place a cup under the coffee spout.  
15  
 
1
Preparing and using for the first time  
T Press the ‘Espresso’ button.  
The grinder starts up. ‘Espresso’ is displayed.  
T Turn the grinder adjustment switch to the desired position  
while the grinder is running.  
The espresso is prepared and the consistency of grind is  
adjusted.  
T Close the storage compartment cover.  
Your IMPRESSA creates fine, creamy, feather-light milk foam with a  
perfect consistency. The most important requirement for frothing  
milk is a milk temperature of 3946 °F (48 °C). We would therefore  
recommend using a milk cooler.  
Connecting milk  
T Attach the milk pipe to the cappuccino frother. To do this,  
attach the end of the milk pipe to the connector on the left-  
hand side of the cappuccino frother.  
T Connect the other end of the milk pipe to a milk cooler.  
16  
 
2
Preparation  
2
Preparation  
J WARNING  
Hot coffee, hot steam and hot water can cause scalding. Scalding is  
a serious burn.  
T
T
T
Use extreme care when handling hot liquid or steam.  
Allow liquid to cool down before drinking.  
In the event of scalding, rinse affected area with cold water  
and seek medical attention.  
T
Keep children AWAY.  
E
E
You can stop preparation of a specialty coffee, specialty coffee  
with milk or hot water at any time. Just press any button.  
During the grinding operation you can select the coffee  
strength of individual products by turning the Rotary  
Switch g: ; (extra-mild), ;; (mild), ;;; (normal), ;;;; (strong)  
or ;;;;; (extra-strong).  
E
During preparation, you can change the preset amount of  
water by turning the Rotary Switch g or pressing the ‘ < ’ and  
‘ > ’ buttons.  
E
E
You can follow the current status of preparation on the display.  
The water volume is given as standard in ‘oz’. You can change  
this setting to ‘ml’ in programming mode (see Chapter 4 ‘Per-  
manent settings in programming mode – Unit for amount of  
water’).  
In programming mode you can enable or disable one-off settings  
during preparation (see Chapter 4 ‘Permanent settings in program-  
ming mode – Enable or disable one-off settings’).  
You can make permanent settings for all products in programming  
mode (see Chapter 4 ‘Permanent settings in programming mode –  
Product settings’).  
17  
 
2
Preparation  
Only some of the specialty coffees you can prepare are shown on  
the display at any one time. As soon as you turn the Rotary Switch,  
more specialty coffees are displayed in the product selector. The  
product selector disappears automatically after 5 seconds if no  
preparation is started.  
Ways of preparing a  
beverage  
The following specialty coffees are displayed as standard:  
‘Espresso’  
U
‘Coffee’  
U
‘Cappuccino’  
U
‘Latte macchiato’  
U
‘Hot water’  
U
1 portion milk’  
U
Additional specialty coffees in the product selector:  
‘Ristretto’  
U
2 espressi’  
U
2 coffees’  
U
2 ristretti’  
U
‘Espresso’ and ‘Coffee’ are prepared following this model.  
Espresso and coffee  
Example: Proceed as follows to prepare one coffee.  
T Place a cup under the coffee spout.  
T Press the ‘Coffee’ button.  
Preparation starts. The preset amount of water for coffee  
flows into the cup.  
Preparation stops automatically. ‘Please select product:’  
appears on the display.  
18  
 
2
Preparation  
To prepare two specialty coffees, either use the product selector or  
press the appropriate preparation button twice (within approximately  
2 seconds).  
Preparing two specialty  
coffees  
Example: Proceed as follows to prepare two coffees (using product  
selector).  
T Place two cups under the coffee spout.  
g
g
k
T Turn the Rotary Switch to view the product selector.  
T Turn the Rotary Switch until 2 coffees’ is displayed.  
T Press the Rotary Switch.  
Coffee preparation starts. The preset amount of water for  
coffee flows into the cups.  
Preparation stops automatically. ‘Please select product:’  
appears on the display.  
E
Proceed as follows to prepare two cups of coffee at the touch  
of a button: Place two cups under the coffee spout. Press the  
‘Coffee’ button twice (within approximately 2 seconds) to  
start coffee preparation.  
Your IMPRESSA can prepare a latte macchiato or cappuccino at the  
touch of a button. There is no need to move the glass or cup.  
Latte macchiato,  
cappuccino  
Example: Proceed as follows to prepare one latte macchiato.  
Precondition: ‘Please select product:’ is displayed. Milk is connected  
to the cappuccino frother.  
T Place a glass under the cappuccino frother.  
T Turn the setting wheel of the cappuccino frother to the Milk  
Foam position ü.  
T Press the ‘Latte macchiato’ button.  
‘Latte macchiato’, the milk foam is prepared.  
Preparation stops automatically when the preset amount of  
milk is reached.  
E
There is a short interval while the hot milk separates from the  
milk foam. This allows the typical layers of a latte macchiato  
to form. You can choose the length of this interval in program-  
ming mode (see Chapter 4 ‘Permanent settings in program-  
ming mode – Product settings’).  
19  
 
2
Preparation  
Coffee preparation starts. The preset amount of water flows  
into the glass. Preparation stops automatically. ‘Please select  
product:’ appears on the display.  
To make sure the cappuccino frother always works properly, you  
must rinse and clean it regularly (see Chapter 5 ‘Maintenance – Rins-  
ing the cappuccino frother’).  
Example: Proceed as follows to prepare milk foam.  
Precondition: ‘Please select product:’ is displayed. Milk is connected  
to the cappuccino frother.  
Warm milk and milk  
foam  
T Place a cup under the cappuccino frother.  
T Turn the setting wheel of the cappuccino frother to the Milk  
Foam position ü.  
E
If you want to heat the milk turn the setting wheel of the cap-  
puccino frother to the Milk position z.  
T Press the 1 portion milk’ button.  
The machine heats up.  
1 portion milk’, the milk foam is prepared. Preparation stops  
automatically when the preset amount of milk foam is  
reached. ‘Please select product:’ appears on the display.  
To make sure the cappuccino frother always works properly, rinse  
and clean it regularly (see Chapter 5 ‘Maintenance – Rinsing the cap-  
puccino frother’).  
You can choose to use a second coffee variety, for example decaf-  
feinated coffee, with the filter funnel for ground coffee.  
Ground coffee  
E
E
Never add more than two level measuring spoons of ground  
coffee.  
Use ground coffee which is not ground too finely. Very fine  
coffee can block up the system so that the coffee only comes  
out in drips.  
E
If you did not fill the machine with a sufficient amount of  
ground coffee, ‘Not enough ground coffee’ is displayed and  
the IMPRESSA stops the operation.  
20  
 
2
Preparation  
E
The desired specialty coffee must be prepared within approx-  
imately one minute after filling with the ground coffee. Oth-  
erwise the IMPRESSA stops the operation and is once more  
ready for use.  
All specialty coffees with ground coffee are prepared following this  
model.  
Example: Proceed as follows to prepare one espresso using ground  
coffee.  
T Place an espresso cup under the coffee spout.  
T Open the cover of the filler funnel for ground coffee.  
‘Please add ground coffee.’  
T Place one level measuring spoon of ground coffee into the  
filler funnel.  
T Close the cover of the filler funnel.  
‘Please select product:’  
T Press the ‘Espresso’ button.  
Preparation starts. The preset amount of water for espresso  
flows into the cup. Preparation stops automatically. ‘Please  
select product:’ appears on the display.  
It is easy to make permanent settings for the amount of water for all  
specialty coffees and hot water according to the cup size. Adjust the  
amount once as shown in the following example. Every time you  
prepare a drink in the future, this amount of water will be dispensed.  
Permanently setting the  
amount of water for the  
cup size  
The permanent settings for adapting the amount of water to the cup  
size for all specialty coffees and hot water follow this model.  
Example: Proceed as follows to permanently set the amount of water  
for one coffee.  
Precondition: ‘Please select product:’ is displayed.  
T Place a cup under the coffee spout.  
T Press and hold the ‘Coffee’ button.  
‘Coffee’ and the fill volume are displayed.  
T Hold the ‘Coffee’ button down until ‘Enough water? Press  
button’ appears.  
T Release the ‘Coffee’ button.  
Preparation starts and the coffee flows into the cup.  
21  
 
2
Preparation  
T Press any button as soon as there is sufficient coffee in the  
cup.  
Preparation stops. ‘Saved’ appears briefly on the display. The  
set amount of water for one coffee is permanently stored.  
‘Please select product:’ appears on the display.  
E
E
You can alter this setting at any time by repeating the above  
procedure.  
You can also permanently set the amount for all specialty cof-  
fees, hot water and milk in programming mode (see Chapter 4  
‘Permanent settings in programming mode – Product set-  
tings’).  
The following temperatures can be selected for preparing hot water:  
‘Low’, ‘Normal’, ‘X high’.  
Hot water  
J
CAUTION There is a danger of scalding from hot water splashes.  
T
Avoid direct contact with the skin.  
T Place a cup under the hot-water nozzle.  
T Press the ‘Hot water’ button.  
‘Hot water’ and the temperature are displayed.  
E
By pressing the ‘ < ’ or ‘ > ’ button several times (within approx-  
imately 2 seconds) you can set the temperature to your indi-  
vidual preference. This setting is not saved.  
‘Hot water’, hot water flows into the cup. Preparation stops  
automatically. ‘Please select product:’ appears on the display.  
22  
 
3
Daily operation  
3
Daily operation  
When the IMPRESSA is switched on, it automatically prompts you  
to perform the rinse operation. Start the rinse operation by pressing  
the Rotary Switch k. In programming mode you can change this  
setting so that the machine starts the switch-on rinse automatically  
(see Chapter 4 ‘Permanent settings in programming mode – Main-  
tenance settings’).  
Switching on  
Precondition: Your IMPRESSA is switched on at the power switch.  
T Place a receptacle under the coffee spout.  
Q
T Press the On/Off button to switch the IMPRESSA on.  
‘Welcome to JURA’ appears on the display. The machine heats  
up.  
‘Please press the Rotary Switch.’  
k
T Press the Rotary Switch.  
The machine rinses. The operation stops automatically.  
‘Please select product:’ appears on the display.  
To ensure that you get many years of reliable service out of your  
IMPRESSA and to guarantee the optimum coffee quality, the machine  
requires daily maintenance.  
Daily maintenance  
T Pull out the drip tray.  
T Empty the coffee grounds container and the drip tray. Rinse  
them both with warm water.  
T Dry the metal contacts on the back of the drip tray.  
T Refit the coffee grounds container and the drip tray.  
T Rinse the water tank with clean water.  
T Dismantle and rinse the cappuccino frother (see Chapter 5  
‘Maintenance – Dismantling and rinsing the cappuccino  
frother’).  
T Wipe the surface of the machine with a clean, soft, damp  
cloth (e.g. microfiber cloth).  
23  
 
3
Daily operation  
When you switch your IMPRESSA off, the spouts used to prepare a  
specialty coffee or milk are rinsed.  
Switching off  
T Place one receptacle under the coffee spout and another  
under the cappuccino frother.  
Q
E
T Press the On/Off button.  
‘Machine is rinsing.’, ‘Milk system is being rinsed.’. The spouts  
used to prepare a specialty coffee or milk are rinsed. The  
operation stops automatically. Your IMPRESSA is switched off.  
When the IMPRESSA is switched off with the On/Off button,  
the machine consumes less than 0.1 W of standby energy. The  
machine can be completely disconnected from the power grid  
using the power switch.  
24  
 
4
Permanent settings in programming mode  
4
Permanent settings in programming mode  
J WARNING  
Hot coffee, hot steam and hot water can cause scalding. Scalding is  
a serious burn.  
T
T
T
Use extreme care when handling hot liquid or steam.  
Allow liquid to cool down before drinking.  
In the event of scalding, rinse affected area with cold water an  
seek medical attention.  
T
Keep children AWAY.  
Press the P button to enter programming mode. You can navigate  
through the program items and permanently save the required set-  
tings simply by turning the Rotary Switch and using the multi-func-  
tion buttons. The following settings can be made:  
Program item  
Sub-item  
Explanation  
‘Maintenance status  
‘Clean’  
T Start the required maintenance program  
(1/6)’  
‘Descale’ (only if filter is  
not activated)  
here.  
‘Change the filter’ (only  
if filter is activated)  
‘Rinse the coffee system’  
‘Clean the milk system’  
‘Product settings (2/6)’ ‘Expert mode’  
‘product selector’  
T Select your settings for specialty coffees  
and hot water.  
‘One-off settings’  
T Deactivate the product selector view.  
T Specify whether or not to allow one-off  
settings during preparation.  
‘Lock/enable’  
T Enable or disable individual products.  
‘Maintenance settings ‘Filter’  
T Indicate whether you are operating your  
IMPRESSA with or without a CLEARYL Pro  
Blue filter cartridge.  
(3/6)’  
‘Water hardness’ (only if  
filter is not activated)  
‘Switch-on rinse’  
T Adjust the water hardness.  
‘Rinse the milk system’  
T Change the settings for the switch-on  
rinse and milk system rinse.  
25  
 
4
Permanent settings in programming mode  
Program item  
‘Machine settings  
(4/6)’  
Sub-item  
Explanation  
‘Save energy’  
‘Switch off after’  
‘Units’  
T Select an energy-saving mode.  
T Set the time after which the IMPRESSA  
should switch off automatically.  
‘Factory setting’  
T Select the unit for the amount of water.  
T Reset the permanently set values of all  
products to the factory settings.  
‘Machine settings (5/6)’ ‘Choose language’  
T Select your language and the background  
‘Display’  
color for the display.  
‘Colour scheme’  
‘Information (6/6)’  
‘Product counter’  
‘Maintenance counter’  
‘Day counter’  
T Keep track of all specialty coffees prepared  
and view the number of maintenance  
programs performed.  
‘Version’  
You can set your IMPRESSA such that programming mode is dis-  
abled. When programming mode is disabled, it cannot be accessed  
by pressing the P button.  
Enabling and disabling  
programming mode  
Example: Proceed as follows to disable programming mode.  
Precondition: ‘Please select product:’ is displayed.  
T Remove the water tank.  
‘Fill water tank’  
T Press the Rotary Switch, the P button and the bottom right-  
hand button simultaneously for about 2 seconds.  
‘The machine is locked.’ is briefly displayed.  
‘Fill water tank’  
Programming mode is disabled.  
To enable programming mode again, remove the water tank. Then  
press the Rotary Switch, the P button and the bottom right-hand  
button simultaneously for about 2 seconds. ‘The machine is  
enabled.’ is briefly displayed. Programming mode is enabled again.  
26  
 
4
Permanent settings in programming mode  
In the program item ‘Product settings (2/6)’ / ‘Expert mode’ you can  
Product settings  
make individual settings for all specialty coffees, milk and hot water.  
J WARNING  
Hot coffee, hot steam and hot water can cause scalding. Scalding is  
a serious burn.  
T
T
T
Use extreme care when handling hot liquid or steam.  
Allow liquid to cool down before drinking.  
In the event of scalding, rinse affected area with cold water an  
seek medical attention.  
T
Keep children AWAY.  
The following settings can be made:  
Product  
Ristretto,  
espresso,  
coffee  
Temperature  
Coffee strength  
Amount  
‘Normal’, ‘High’  
Volume:  
‘extra-mild’ ;, ‘mild’ ;;,  
‘normal’ ;;;, ‘strong’ ;;;;,  
‘extra-strong’ ;;;;;  
0.5 oz’ 8.0 oz’  
(25 ml – 240 ml)  
Two ristretti,  
two espressi,  
two coffees  
‘Normal’, ‘High’  
Volume:  
0.5 oz’ 8.0 oz’  
(25 ml – 240 ml) (per cup)  
Amount of milk:  
Latte macchiato, ‘Normal’, ‘High’  
cappuccino  
‘extra-mild’ ;, ‘mild’ ;;,  
‘normal’ ;;;, ‘strong’ ;;;;,  
‘extra-strong’ ;;;;;  
3 sec.’ 120 sec.’  
Interval: 0 sec.’ 60 sec.’  
Volume: 0.5 oz’ 8.0 oz’  
(25 ml – 240 ml)  
Portion of milk  
Hot water  
3 sec.’ 120 sec.’  
0.5 oz’ 15.0 oz’  
(25 ml – 450 ml)  
‘Low’, ‘Normal’,  
‘X high’  
Example: Proceed as follows to change the amount of milk for a  
latte macchiato from 16 sec.’ to 20 sec.’, the interval from 30 sec.’  
to 40 sec.’ and the amount of water from 1.5 oz’ (45 ml) to 1.0 oz’  
(40 ml).  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Product set-  
tings (2/6)’ is displayed.  
T Press the ‘Expert mode’ button.  
‘Expert mode’  
27  
 
4
Permanent settings in programming mode  
E
Next select the button of the product for which you would like  
to make settings. No product is prepared at this point.  
T Press the ‘Latte macchiato’ button.  
‘Latte macchiato’  
T Press the ‘Amount of milk’ button.  
T Press the ‘ < ’ or ‘ > ’ button to change setting for the amount  
of milk to 20 sec.’.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
T Press the ‘Volume’ button.  
T Press the ‘ < ’ or ‘ > ’ button to change setting for the fill vol-  
ume to 1.0 oz’ (40 ml).  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
T Press the ‘Next’ button.  
T Press the ‘Interval’ button.  
T Press the ‘ < ’ or ‘ > ’ button to change setting for the interval  
to 40 sec.’.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Latte macchiato’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
In the program item ‘Product settings (2/6)’ / ‘One-off settings’ you  
Enable or disable one-off  
settings  
can make the following setting:  
‘Active’  
U
One-off settings can be made during preparation (e.g. coffee  
U
strength or amount of water).  
‘Inactive’  
U
One-off settings cannot be made during preparation. The  
U
product is prepared according to the settings in program-  
ming mode (‘Product settings (2/6)’ / ‘Expert mode’).  
Example: Proceed as follows to disable one-off settings during prep-  
aration.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
28  
 
4
Permanent settings in programming mode  
g
T Turn the Rotary Switch until the program item ‘Product set-  
tings (2/6)’ is displayed.  
T Press the ‘One-off settings’ button.  
‘One-off settings’  
T Press the ‘Inactive’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Product settings (2/6)’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
One-off settings cannot now be made during preparation.  
In the program item ‘Product settings (2/6)’ / ‘product selector’ you  
Enabling and disabling  
product selector view  
can make the following setting:  
‘Active’  
U
Product selector view is active and can be started by turning  
U
the Rotary Switch g when the IMPRESSA is ready for use.  
‘Inactive’  
U
Product selector view is inactive.  
U
Example: Proceed as follows to disable product selector view.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Product set-  
tings (2/6)’ is displayed.  
T Press the ‘product selector’ button.  
‘product selector’  
T Press the ‘Inactive’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Product settings (2/6)’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
Product selector view can now no longer by started by turn-  
ing the Rotary Switch.  
29  
 
4
Permanent settings in programming mode  
In the program item ‘Product settings (2/6)’ / ‘Lock/enable’ you can  
Enabling and disabling  
products  
enable or disable each individual product.  
Example: For example, you can disable the preparation of hot water.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Product set-  
tings (2/6)’ is displayed.  
T Press the ‘Lock/enable’ button.  
‘Lock/enable’  
E
The lock symbol indicates whether the product is enabled or  
disabled. If the lock is closed, the product is disabled.  
T Press the ‘Next’ button until the product ‘Hot water’ is dis-  
played.  
T Press the ‘Hot water’ button.  
The lock is closed. Hot water preparation is now disabled.  
T Press the P button to exit programming mode.  
‘Please select product:’  
O
On the start screen, ‘Hot water’ is greyed out.  
In the program item ‘Maintenance settings (3/6)’ you can make the  
Maintenance settings  
following settings:  
‘Filter’  
U
Activate the CLEARYL Pro Blue filter cartridge (see Chapter 5  
U
‘Maintenance – Inserting and activating the filter’).  
‘Water hardness’  
U
If you do not have a filter cartridge, you will need to set the  
U
water hardness (see Chapter 4 ‘Permanent settings in pro-  
gramming mode – Setting the water hardness’).  
‘Switch-on rinse’ / ‘Manual’  
U
The switch-on rinse must be started manually.  
U
‘Switch-on rinse’ / ‘Automatic’  
U
The switch-on rinse is started automatically.  
U
‘Rinse the milk system’ / ‘After 10 min’  
U
You are prompted to rinse the milk system 10 minutes after  
U
preparation of a specialty coffee with milk.  
30  
 
4
Permanent settings in programming mode  
‘Rinse the milk system’ / ‘Immediate’  
U
You are prompted to rinse the milk system immediately  
U
after preparation of a specialty coffee with milk.  
Example: Proceed as follows to make the machine prompt you to  
rinse the milk system immediately after preparing a specialty coffee  
with milk.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Maintenance  
settings (3/6)’ is displayed.  
T Press the ‘Rinse the milk system’ button.  
‘Rinse the milk system’  
T Press the ‘Immediate’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Maintenance settings (3/6)’  
O
E
T Press the P button to exit programming mode.  
‘Please select product:’  
If you are using the CLEARYL Pro Blue filter cartridge and have  
activated it, it is not possible to set the water hardness.  
Setting the water  
hardness  
The harder the water is, the more frequently the IMPRESSA needs to  
be descaled. It is therefore important to set the water hardness accu-  
rately.  
The water hardness can be adjusted on a continuous scale between  
1° dH and 30° dH.  
Example: Proceed as follows to change the water hardness from  
16 °dH’ to 25 °dH’.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Maintenance  
settings (3/6)’ is displayed.  
T Press the ‘Water hardness’ button.  
‘Water hardness’  
31  
 
4
Permanent settings in programming mode  
T Press the ‘ < ’ or ‘ > ’ button to set the water hardness.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Maintenance settings (3/6)’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
In the program item ‘Machine settings (4/6)’ / ‘Save energy’ you can  
permanently set an energy-saving mode (Energy Save Mode,  
E.S.M.©):  
Energy-saving mode  
‘Active’  
U
Soon after the last preparation, the IMPRESSA stops heating  
U
up. After about 5 minutes the message ‘Energy Save’ is dis-  
played.  
Before you can prepare a specialty coffee, specialty coffee  
U
with milk, or hot water, the machine must heat up.  
‘Inactive’  
U
All specialty coffees, specialty coffees with milk and hot  
U
water can be prepared without having to wait.  
Example: Proceed as follows to change the energy-saving mode  
from ‘Active’ to ‘Inactive’.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Machine set-  
tings (4/6)’ is displayed.  
T Press the ‘Save energy’ button.  
‘Save energy’  
T Press the ‘Inactive’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Machine settings (4/6)’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
32  
 
4
Permanent settings in programming mode  
By instructing your IMPRESSA to automatically switch itself off, you  
can cut down your energy consumption. If this function is activated,  
your IMPRESSA switches off automatically after the preset time fol-  
lowing the last action on the machine.  
Automatic switch-off  
You can set the automatic switch-off to 15 minutes, 30 minutes  
or 115 hours.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Machine set-  
tings (4/6)’ is displayed.  
T Press the ‘Switch off after’ button.  
‘Switch off after’  
T Press the ‘ < ’ or ‘ > ’ button to change the setting.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Machine settings (4/6)’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
You can change the unit for the amount of water from ‘oz’ to ‘ml’.  
Unit for amount of water  
Example: Proceed as follows to change the unit for the amount of  
water from ‘oz’ to ‘ml’.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Machine set-  
tings (4/6)’ is displayed.  
T Press the ‘Units’ button.  
‘Units’  
T Press the ‘ml’ button.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Machine settings (4/6)’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
33  
 
4
Permanent settings in programming mode  
In the program item ‘Machine settings (4/6)’ / ‘Factory setting’ you  
Restore factory settings  
can reset various settings to their factory settings:  
‘Machine’  
U
All user settings (apart from the ‘filter’ and ‘water hardness’)  
U
are reset to factory settings. Your IMPRESSA then switches off.  
‘Product’  
U
The settings (amount of water, coffee strength, temperature  
U
etc.) for any product can be reset individually to the factory  
settings. The corresponding double product is also reset to  
the factory settings at the same time.  
‘All products’  
U
The settings (amount of water, coffee strength, temperature  
U
etc.) for all products are reset to the factory settings.  
‘Display settings’  
U
All display settings are reset to the factory settings.  
U
Example: Proceed as follows to reset the values for ‘Espresso’ to the  
factory settings.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Machine set-  
tings (4/6)’ is displayed.  
T Press the ‘Factory setting’ button.  
‘Factory setting’  
T Press the ‘Product’ button.  
‘Product’  
T Press the ‘Espresso’ button.  
‘Espresso’ / ‘Reset this product to the factory setting?’  
T Press the ‘Yes’ button.  
‘Saved’ appears briefly on the display.  
‘Machine’  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
34  
 
4
Permanent settings in programming mode  
In this program item you can set the language used by your  
IMPRESSA.  
Language  
E
If you choose the wrong language by mistake, you can easily  
reset the machine to ‘English’: Press the P button to enter pro-  
gramming mode. Use the Rotary Switch g to select program  
item ‘5/6’ and then press the top left-hand button.  
Example: Proceed as follows to change the language from ‘English’  
to ‘Deutsch’.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Machine set-  
tings (5/6)’ is displayed.  
T Press the ‘Choose language’ button.  
‘Choose language’  
T Press the ‘Deutsch’ button.  
‘Gespeichert’ appears briefly on the display.  
‘Geräteeinstellungen (5/6)’  
O
T Press the P button to exit programming mode.  
‘Bitte wählen Sie Ihr Produkt:’  
In this program item you can set the background color for the dis-  
play of your IMPRESSA.  
Background color  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Machine set-  
tings (5/6)’ is displayed.  
T Press the ‘Colour scheme’ button.  
‘Colour scheme’  
T Press the ‘ < ’ or ‘ > ’ button to change the setting.  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Machine settings (5/6)’  
35  
 
4
Permanent settings in programming mode  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
E
The selected background color only applies on the selection  
page of the display showing the specialty coffees.  
In the program item ‘Information (6/6)’ you can view the following  
Querying information  
information.  
‘Product counter’: Number of prepared coffee specialty cof-  
U
fees, specialty coffees with milk and hot water  
‘Maintenance counter’: Maintenance status and number of  
U
maintenance programs performed (cleaning, descaling,  
changing the filter)  
‘Day counter’: Number of prepared coffee specialty coffees,  
U
specialty coffees with milk and hot water. This counter can be  
reset to zero.  
‘Version’: Software version  
U
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
g
T Turn the Rotary Switch until the program item ‘Information  
(6/6)’ is displayed.  
T Press the ‘Product counter’ button.  
The number of specialty coffees prepared is displayed.  
E
You can also view the number of products prepared in the  
product selector. To do this, turn the Rotary Switch.  
T Press the button.  
‘Information (6/6)’  
E
To reset the day counter to zero, press the ‘Day counter’ but-  
ton. Then press the button and confirm by pressing ‘Yes’.  
O
T Press the P button to exit programming mode.  
‘Please select product:’  
36  
 
5
Maintenance  
5
Maintenance  
J WARNING  
Use of maintenance products that are harmful to health and dis-  
charge of liquids during maintenance program. Harmful if swal-  
lowed. Irritating to eyes and skin.  
T
T
Keep children AWAY.  
Keep children away from the machine while it is performing a  
maintenance program.  
T
T
T
T
Avoid contact with skin and eyes.  
Avoid generation of dust. Do not inhale dust.  
When using do not eat or drink.  
Keep maintenance products away from food, drink and ani-  
mal food.  
T
Keep container tightly closed and dry. Keep in a cool place.  
Your IMPRESSA has the following integrated maintenance pro-  
grams:  
Rinsing the machine (‘Rinse the coffee system’)  
U
Rinsing the cappuccino frother (‘Rinse the milk system’)  
U
Cleaning the cappuccino frother (‘Clean the milk system’)  
U
Changing the filter (‘Change the filter’) (only if filter is activated)  
U
Cleaning the machine (‘Clean’)  
U
Descaling the machine (‘Descale’)  
U
E
Clean or descale the machine, rinse the milk system or change  
the filter when you are prompted to do so.  
E
Press the P button to view a list of the maintenance programs  
(‘Maintenance status (1/6)’). By referring to the bar you can see  
which maintenance program is due. When the bar is com-  
pletely filled with red, your IMPRESSA will prompt you to per-  
form the appropriate maintenance program.  
E
The IMPRESSA will not prompt you to clean the milk system.  
In the interests of hygiene, you should clean the milk system  
daily when you have been preparing milk.  
37  
 
5
Maintenance  
You can initiate the rinse operation manually at any time.  
Rinsing the machine  
Precondition: ‘Please select product:’ is displayed.  
T Place a receptacle under the coffee spout.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
T Press the ‘Rinse the coffee system’ button.  
‘Machine is rinsing.’, water flows out of the coffee spout.  
The rinse stops automatically. ‘Please select product:’  
appears on the display.  
After each milk preparation, the IMPRESSA prompts you to rinse the  
milk system.  
Rinsing the cappuccino  
frother  
Precondition: ‘Rinse the milk system’ is displayed.  
T Place a receptacle under the cappuccino frother.  
k
T Press the Rotary Switch.  
‘Milk system is being rinsed.’, water flows out of the cappuc-  
cino frother.  
The rinse stops automatically and ‘Please select product:’  
appears on the display.  
38  
 
5
Maintenance  
To ensure that the cappuccino frother always works properly, you  
must clean it daily when you have been preparing milk. Your  
IMPRESSA will not prompt you to clean the cappuccino frother.  
Cleaning the cappuccino  
frother  
J WARNING  
Non-recommended cleaning agents will not optimally remove milk  
residues. This may cause the cappuccino frother to become blocked  
and fly off the machine. Discharge of hot steam.  
T
Use only original JURA Cappuccino Cleaner.  
J WARNING  
Harmful and irritating cleaning agent. Harmful if swallowed. Irritat-  
ing to eyes and skin.  
T
T
T
Keep children AWAY.  
Avoid contact with skin and eyes.  
After contact with skin, wash immediately with plenty of  
water. In case of skin irritation, seek medical advice.  
After eye contact, immediately flush eyes with plenty of water  
and seek medical advice.  
T
T
If swallowed, rinse mouth immediately and drink large quan-  
tities of water. Do not induce vomiting. Seek medical advice  
immediately and show label.  
E
JURA Cappuccino Cleaner is available from specialized dealers.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
T Press the ‘Clean the milk system’ button.  
‘Cleaning agent for milk system’  
T Pour 8.5 oz (250 ml) of fresh water into a receptacle and add  
one capful of Cappuccino Cleaner.  
T Immerse the milk pipe in the receptacle.  
T Turn the setting wheel of the cappuccino frother to the Milk  
Foam ü or Milk z position.  
T Place another receptacle under the cappuccino frother.  
T Press the ‘Next’ button.  
‘Milk system is being cleaned.’, water flows out of the cap-  
puccino frother.  
‘Water for cleaning milk system’  
T Rinse the receptacle thoroughly, fill it with 8.5 oz (250 ml) of  
fresh water and immerse the milk pipe in the water.  
39  
 
5
Maintenance  
T Empty the other receptacle and place it under the cappuc-  
cino frother again.  
T Press the ‘Next’ button.  
‘Milk system is being cleaned.’, the cappuccino frother and  
the pipe are rinsed with fresh water.  
‘Please select product:’ appears on the display.  
Dismantling and rinsing  
the cappuccino frother  
T Carefully pull the cappuccino frother down and off.  
T Dismantle the cappuccino frother into its individual parts.  
T Rinse all parts of the cappuccino frother thoroughly under  
running water.  
T Reassemble the cappuccino frother.  
E
Ensure that all individual parts are correctly and firmly con-  
nected to ensure correct operation of the cappuccino frother.  
T Firmly attach it to the connector.  
Your IMPRESSA no longer has to be descaled if you are using the  
CLEARYL Pro Blue filter cartridge. If the water hardness is 10° dH or  
more, we recommend using the filter cartridge. If you do not know  
the hardness of your water, you can find this out first (see Chapter 1  
‘Preparing and using for the first time – Determining the water hard-  
ness’).  
Inserting and activating  
the filter  
If you did not activate the filter cartridge the first time you used the  
machine, you can do this now as follows.  
E
Perform the ‘inserting the filter’ operation without any inter-  
ruptions. This will ensure that your IMPRESSA always produces  
its best.  
Precondition: ‘Please select product:’ is displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
T Turn the Rotary Switch until the program item ‘Maintenance  
settings (3/6)’ is displayed.  
T Press the ‘Filter’ button.  
‘Filter’  
g
T Press the ‘Active’ button.  
40  
 
5
Maintenance  
T Press the ‘Save’ button.  
‘Saved’ appears briefly on the display.  
‘Insert filter’  
T Remove and empty the water tank.  
T Open the filter holder and insert the filter cartridge into the  
water tank, exerting slight pressure.  
T Close the filter holder. It will click into place audibly.  
E
After two months, the filter will cease to work. Set the date on  
the date plate on the filter holder in the water tank.  
T Fill the water tank with fresh, cold water and reinsert the tank.  
T Place a receptacle under the hot-water nozzle.  
T Press the ‘Next’ button.  
‘Filter is being rinsed.’, water flows out of the hot-water noz-  
zle.  
E
E
You can interrupt rinsing of the filter at any time by pressing  
any button. Press the Rotary Switch k to continue rinsing of  
the filter.  
The water may be slightly discolored. This is not harmful to  
health and does not affect the taste.  
Rinsing of the filter stops automatically. The machine heats  
up.  
‘Please select product:’  
Your IMPRESSA is once more ready for use.  
E
After 4058 oz (120 liters) of water have flowed through, the fil-  
ter will cease to work. Your IMPRESSA will automatically  
prompt you to change the filter.  
Changing the filter  
E
E
After two months, the filter will cease to work. Set the date on  
the date plate on the filter holder in the water tank.  
If the CLEARYL Pro Blue filter cartridge is not activated in pro-  
gramming mode, you will not be prompted to change the fil-  
ter.  
Precondition: ‘Please select product:’ is displayed. The c symbol is  
also displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
41  
 
5
Maintenance  
T Press the ‘Change the filter’ button.  
‘Change the filter’  
E
If you do not want to start changing the filter just yet, press  
the button.  
T Press the ‘Next’ button.  
‘Change filter’  
T Remove and empty the water tank.  
T Open the filter holder and remove the old CLEARYL filter car-  
tridge.  
T Insert the New filter cartridge into the water tank, exerting  
slight pressure.  
T Close the filter holder. It will click into place audibly.  
T Fill the water tank with fresh, cold water and reinsert the tank.  
T Place a receptacle (at least 17 oz or 500 ml) under the hot-  
water nozzle.  
T Press the ‘Next’ button.  
‘Filter is being rinsed.’, water flows out of the hot-water noz-  
zle.  
E
E
You can interrupt rinsing of the filter at any time by pressing  
any button. Press the Rotary Switch k to continue rinsing of  
the filter.  
The water may be slightly discolored. This is not harmful to  
health and does not affect the taste.  
Rinsing of the filter stops automatically after approximately  
17 oz (500 ml). The machine heats up. ‘Please select product:’  
appears on the display.  
After 200 preparations or 80 switch-on rinses, the IMPRESSA will  
Cleaning the machine  
prompt you to clean it.  
J WARNING  
Non-recommended (e.g. liquid) cleaning agents may contain sub-  
stances that could damage the machine or leave residues.  
T
Use only original JURA cleaning tablets. These are specially  
formulated for your machine.  
42  
 
5
Maintenance  
J WARNING  
Harmful and irritating cleaning agent. Harmful if swallowed. Irritat-  
ing to eyes and skin.  
T
T
T
T
Keep children AWAY.  
Avoid contact with skin and eyes.  
Avoid generation of dust. Do not inhale dust.  
After contact with skin, wash immediately with plenty of  
water. In case of skin irritation, seek medical advice.  
After eye contact, immediately flush eyes with plenty of water  
and seek medical advice.  
T
T
If swallowed, rinse mouth immediately and drink large quan-  
tities of water. Do not induce vomiting. Seek medical advice  
immediately and show label.  
E
E
The cleaning program lasts approximately 20 minutes.  
Do not interrupt the cleaning program. The quality of cleaning  
will be impaired if you do so.  
E
JURA cleaning tablets are available from specialized dealers.  
Precondition: ‘Please select product:’ is displayed. The c symbol is  
also displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
T Press the ‘Clean’ button.  
‘Clean’  
E
If you do not want to start cleaning just yet, press the but-  
ton.  
T Press the ‘Next’ button.  
‘Empty drip tray’  
T Empty the drip tray and coffee grounds container and put  
them back into the machine.  
‘Please press the Rotary Switch.’  
T Place one receptacle under the coffee spout and another  
under the cappuccino frother.  
k
T Press the Rotary Switch.  
‘Machine is being cleaned.’, water flows out of the coffee  
spout.  
The operation is interrupted, ‘Add cleaning tablet’.  
43  
 
5
Maintenance  
T Open the cover of the filler funnel for ground coffee.  
T Insert a JURA cleaning tablet into the filler funnel.  
T Close the cover of the filler funnel.  
‘Please press the Rotary Switch.’  
k
T Press the Rotary Switch.  
‘Machine is being cleaned.’, water flows repeatedly out of  
the coffee spout and the cappuccino frother.  
The operation is interrupted, ‘Empty drip tray’.  
T Empty the drip tray and coffee grounds container and put  
them back into the machine.  
Cleaning is now complete. Your IMPRESSA is once more  
ready for use.  
The IMPRESSA builds up deposits of limescale over time and auto-  
matically prompts you to descale it when necessary. The degree of  
calcification depends on the hardness of your water.  
Descaling the machine  
J WARNING  
Non-recommended descaling agents (e.g. vinegar) may contain  
substances that could damage the machine or leave residues.  
T
Use only original JURA descaling tablets. These are specially  
formulated for your machine.  
J WARNING  
Harmful and irritating descaling agent. Harmful if swallowed. Irritat-  
ing to eyes and skin.  
T
T
T
T
Keep children AWAY.  
Avoid contact with skin and eyes.  
Avoid generation of dust. Do not inhale dust.  
After contact with skin, wash immediately with plenty of  
water. In case of skin irritation, seek medical advice.  
After eye contact, immediately flush eyes with plenty of water.  
Remove contact lenses. Seek medical advice.  
If swallowed, rinse mouth immediately and drink large quan-  
tities of water. Do not induce vomiting. Seek medical advice  
immediately and show label.  
T
T
NOTICE If the descaling operation is interrupted, there may be damage to  
the machine.  
T
Allow the descaling program to run to the end.  
44  
 
5
Maintenance  
E
E
E
The descaling program lasts approximately 50 minutes.  
JURA descaling tablets are available from specialized dealers.  
If you use a CLEARYL Pro Blue filter cartridge and this is acti-  
vated, you will not be prompted to descale.  
E
If the descaling agent comes into contact with sensitive sur-  
faces (e.g. marble), damage cannot be ruled out. Clean up any  
splashes immediately.  
Precondition: ‘Please select product:’ is displayed. The c symbol is  
also displayed.  
O
T Press the P button.  
‘Maintenance status (1/6)’  
T Press the ‘Descale’ button.  
‘Descale’  
E
If you do not want to start descaling just yet, press the but-  
ton.  
T Press the ‘Next’ button.  
‘Empty drip tray’  
T Empty the drip tray and coffee grounds container and put  
them back into the machine.  
‘Pour descaling agent into water tank’  
T Remove and empty the water tank.  
T Completely dissolve 3 JURA descaling tablets in a receptacle  
holding 20 oz (600 ml) of water. This may take several min-  
utes.  
T Pour the solution into the empty water tank and insert it into  
the machine.  
‘Please press the Rotary Switch.’  
T Remove the cappuccino frother.  
T Place a receptacle under the connector of the cappuccino  
frother and another under the hot-water nozzle.  
T Press the Rotary Switch.  
k
‘Machine is being descaled.’, water flows repeatedly out of  
the connector of the cappuccino frother and the hot-water  
nozzle.  
The operation is interrupted, ‘Empty drip tray’.  
T Empty both receptacles.  
45  
 
5
Maintenance  
T Empty the drip tray and coffee grounds container and put  
them back into the machine.  
‘Fill water tank’  
T Remove the water tank and rinse it thoroughly.  
T Fill the water tank with fresh, cold water and reinsert the  
tank.  
‘Please press the Rotary Switch.’  
T Refit the cappuccino frother.  
T Place a receptacle under the cappuccino frother, the coffee  
spout and the hot-water nozzle.  
k
T Press the Rotary Switch.  
‘Machine is being descaled.’, water flows out of the hot-water  
nozzle and the cappuccino frother.  
‘Machine is heating.’, ‘Machine is rinsing.’, water flows out of  
the coffee spout.  
The operation stops automatically, ‘Empty drip tray’.  
T Empty the drip tray and coffee grounds container and put  
them back into the machine.  
Descaling is now complete. Your IMPRESSA is once more  
ready for use.  
E
If the descaling operation stops unexpectedly, rinse the water  
tank thoroughly.  
Coffee beans may be covered with a slight oil film which remains on  
the walls of the bean container. These traces may negatively affect  
the coffee result. For this reason clean the bean container from time  
to time.  
Cleaning the bean  
container  
Precondition: ‘Fill bean container’ is displayed.  
Q
T Switch the machine off with the On/Off button.  
T Switch the machine off at the power switch.  
T Remove the aroma preservation cover.  
T Clean the bean container with a soft, dry cloth.  
T Fill the bean container with coffee beans and close the aroma  
preservation cover.  
3
46  
 
5
Maintenance  
Limescale deposits may form in the water tank. To ensure correct  
function of the machine, descale the water tank from time to time.  
T Remove the water tank.  
Descaling the water tank  
T If you use a CLEARYL Pro Blue filter cartridge, remove this.  
T Descale the tank with a mild conventional descaling agent  
in accordance with the manufacturer's instructions.  
T Rinse out the water tank thoroughly.  
T If you use a CLEARYL Pro Blue filter cartridge, insert this  
again.  
T Fill the water tank with fresh, cold water and reinsert the tank.  
47  
 
6
Display messages  
6
Display messages  
Message  
Cause/Result  
Action  
‘Fill water tank’  
The water tank is empty. You  
cannot prepare any products.  
T Fill the water tank (see Chapter 1  
‘Preparing and using for the first time –  
Filling the water tank’).  
‘Empty coffee  
grounds  
The coffee grounds container is  
full. You cannot prepare any  
products.  
T Empty the coffee grounds container  
and the drip tray (see Chapter 3 ‘Daily  
operation – Daily maintenance’).  
container’  
‘Empty drip tray’ The drip tray is full. You cannot  
prepare any products.  
T Empty the drip tray and the coffee  
grounds container.  
T Clean and dry the metal contacts on  
the back of the drip tray.  
‘Drip tray not  
fitted’  
The drip tray is not inserted  
correctly or is not inserted at all.  
You cannot prepare any  
products.  
T Fit the drip tray.  
‘Please press the The IMPRESSA is prompting you  
T Press the Rotary Switch to start the  
rinse or to continue the maintenance  
program.  
Rotary Switch.’  
to perform a rinse or continue a  
maintenance program that was  
already started.  
‘Fill bean  
The bean container is empty.  
You cannot prepare any  
products.  
T Fill the bean container (see Chapter 1  
‘Preparing and using for the first time –  
Filling the bean container’).  
container’  
‘Rinse the milk  
system’  
The IMPRESSA is prompting you  
to rinse the milk system.  
T Press the Rotary Switch to start rinsing  
the milk system.  
‘Please select  
product:’ is  
The IMPRESSA is prompting you  
to perform a maintenance  
program.  
T Press the P button to view the list of  
maintenance programs (‘Maintenance  
status (1/6)’). By referring to the bar you  
can see which maintenance program is  
due. When the bar is completely filled  
with red, your IMPRESSA will prompt you  
to perform the appropriate maintenance  
program.  
displayed.  
The c symbol is  
also displayed.  
‘Not enough  
There is insufficient ground  
coffee in the machine; the  
IMPRESSA stops the operation.  
T The next time you prepare a beverage,  
add more ground coffee (see Chapter 2  
‘Preparation – Ground coffee’).  
ground coffee’  
48  
 
7
Troubleshooting  
7
Troubleshooting  
Problem  
Cause/Result  
Action  
When preparing a latte  
macchiato, the typical  
three layers do not  
form.  
T Turn the setting wheel of the cappuc-  
cino frother to the far right and the Milk  
Foam position ü.  
T Change the length of the interval to at  
least 30 seconds in programming mode  
(see Chapter 4 ‘Permanent settings in  
programming mode – Product settings’).  
Insufficient foam is  
produced when the  
milk is frothed or milk  
sprays from the  
The cappuccino frother is  
dirty.  
T Rinse and clean the cappuccino  
frother (see Chapter 5 ‘Maintenance –  
Rinsing the cappuccino frother’).  
T Check that the air intake pipe is fitted  
on the cappuccino frother.  
cappuccino frother.  
T Rinse or replace the air intake pipe. You  
will find a replacement in the Welcome  
Pack.  
Coffee only comes out Coffee or ground coffee has  
T Put the grinder on a coarser setting or  
use coarser ground coffee (see Chapter 1  
‘Preparing and using for the first time –  
Adjusting the grinder’).  
in drips when it is  
being prepared.  
been ground too finely and  
is blocking the system. The  
same filter cartridge may  
have been used several  
times or the water hardness  
set incorrectly in the  
T Perform descaling (see Chapter 5  
‘Maintenance – Descaling the machine’).  
programming mode.  
Water hardness cannot The CLEARYL Pro Blue filter  
T Deactivate the filter cartridge in  
be adjusted.  
cartridge is activated.  
programming mode.  
‘Fill bean container’ is  
The sliding catch for the  
T Pull the sliding catch on the right-hand  
displayed although the bean container has not  
side of the bean container fully out.  
bean container is full.  
been pulled out or has not  
been pulled out completely.  
The metal contacts of the  
drip tray are dirty or wet.  
‘Empty drip tray’ is  
always displayed.  
T Clean and dry the metal contacts on  
the back of the drip tray.  
‘Fill water tank’ is  
The water tank float is  
T Descale the water tank (see Chapter 5  
‘Maintenance – Descaling the water  
tank’).  
displayed although the trapped.  
water tank is full.  
49  
 
7
Troubleshooting  
Problem  
Cause/Result  
Action  
Little or no water or  
steam comes out of  
The connector of the  
cappuccino frother may be  
T Remove the cappuccino frother.  
T Unscrew the black connector with the  
aid of the hexagonal hole on the  
the cappuccino frother. blocked by milk residues or  
The pump is very  
quiet.  
limescale fragments  
measuring spoon for ground coffee.  
T Clean the connector thoroughly.  
T Screw the connector back on by hand.  
T Carefully tighten it using the hexagonal  
hole on the measuring spoon, turning by  
no more than a quarter of a rotation.  
loosened during descaling.  
Grinder is making a  
very loud noise.  
There are foreign objects in  
the grinder.  
T Contact customer support in your  
country (see Chapter 11 ‘JURA contact  
details / Legal information’).  
‘ERROR 2is displayed. If the machine was exposed  
to the cold for a long period  
T Warm the machine at room tempera-  
ture.  
of time, heating is disabled  
for safety reasons.  
Other ‘ERROR’  
messages are dis-  
played.  
T Switch the IMPRESSA off at the power  
switch. Contact customer support in  
your country (see Chapter 11 ‘JURA  
contact details / Legal information’).  
E
If you were unable to solve the problem, contact customer  
support in your country (see Chapter 11 ‘JURA contact details /  
Legal information’).  
50  
 
8
Transport and environmentally friendly disposal  
8
Transport and environmentally friendly disposal  
In order to protect the IMPRESSA from frost during transport, the  
system must be emptied.  
Transport / Emptying the  
system  
Precondition: ‘Please select product:’ is displayed.  
T Carefully pull the cappuccino frother down and off.  
T Place a receptacle under the connector of the cappuccino  
frother.  
T Press the 1 portion milk’ button.  
1 portion milk’, hot steam is discharged from the connector.  
T Remove and empty the water tank.  
g
Q
T Turn the Rotary Switch until 60 sec.’ is displayed.  
Steam will continue to be discharged from the connector  
until the system is empty.  
‘Fill water tank’  
T Press the On/Off button.  
The IMPRESSA is switched off.  
Please dispose of old machines in an environmentally neutral way.  
Disposal  
H
51  
 
9
Technical data  
9
Technical data  
Voltage  
120 V ~, 60 Hz  
1450 W  
Power  
Airborne noise emitted  
Ambient conditions  
L
P
< 70 dB (A)  
Humidity max. 80%  
Ambient temperature  
50 95 °F  
(10 35 °C)  
Conformity mark  
Energy consumption  
‘Save energy’ / ‘Active’  
Energy consumption  
‘Save energy’ / ‘Inactive’  
Pump pressure  
approx. 4.1 Wh  
approx. 10.6 Wh  
Static, max. 15 bar  
135 oz  
Holding capacity of water tank  
(4 l)  
Holding capacity of bean container  
17.6 oz  
(500 g)  
Holding capacity of coffee grounds  
container  
max. 40 portions  
Cord length  
approx. 43.3 in.  
(approx. 1.1 m)  
Weight  
approx. 29 lb  
(approx. 12.8 kg)  
13.4 19.7 17.3 in.  
(33.8 49.7 43.2 cm)  
Dimensions (W H D)  
Information for testers (repeat test in accordance with DIN VDE  
0701-0702): The central grounding point (CGP) is located on the back  
of the machine below the JURA logo (turn JURA logo anti-clockwise).  
Directives The machine complies with the following directives:  
Standard UL 1082  
U
Canadian Standard CSA C22.2 No. 64  
U
52  
 
10 Index  
10 Index  
A
D
Addresses 56  
Descaling  
Machine 44  
Water tank 47  
Display 9  
Display messages 48  
Display settings 35  
Disposal 51  
Aroma preservation cover  
Bean container with aroma preservation  
cover 8  
Automatic switch-off 33  
B
Background color 35  
Bean container  
Double product 19  
Drip tray 8  
Bean container with aroma preservation  
cover 8  
Cleaning 46  
E
F
Emptying the system 51  
Energy-saving mode 32  
Errors  
Troubleshooting 49  
Espresso 18  
Filling 11  
Button  
On/Off button 9  
P button (programming) 9  
C
Factory settings  
Restore factory settings 34  
Filler funnel  
Filler funnel for ground coffee 8  
Filling  
Bean container 11  
Water tank 11  
Filter  
Changing 41  
Inserting and activating the filter 40  
First-time use 12  
Frother  
Cappuccino 19  
Cappuccino frother  
Cleaning 39  
Rinsing 38  
Cleaning  
Bean container 46  
Cappuccino frother 39  
Machine 42  
CLEARYL Pro Blue filter cartridge  
Changing 41  
Inserting and activating the filter 40  
Coffee 18  
Coffee grounds container 8  
Coffee spout  
Height- and width-adjustable coffee  
spout 8  
Consistency of grind  
Adjusting the grinder 15  
Grinder adjustment switch 8  
Contact details 56  
Cover  
Storage compartment 8  
Water tank 8  
Cup platform 8  
Customer support 56  
Cappuccino frother 8  
G
H
I
Grinder adjustment switch 8  
Ground coffee 20  
Measuring spoon for ground coffee 8  
Hotline 56  
Hot water 22  
Hot-water nozzle 8  
Important safeguards  
Safety 4  
Instant coffee  
Ground coffee 20  
Internet 10  
53  
 
10 Index  
Product settings 27  
J
Programming mode 25  
Automatic switch-off 33  
Background color 35  
JURA  
Contact details 56  
Internet 10  
Energy-saving mode 32  
Language 35  
Maintenance settings 30  
Product settings 27  
L
Language 35  
Latte macchiato 19  
M
Querying information 36  
Restore factory settings 34  
Setting the water hardness 31  
Unit for amount of water 33  
Machine  
Cleaning 42  
Descaling 44  
Rinsing 38  
Setting up 10  
Switching off 24  
Switching on 23  
Q
R
Querying information 36  
Rinsing  
Maintenance 37  
Cappuccino frother 38  
Machine 38  
Daily maintenance 23  
Maintenance settings 30  
Measuring spoon for ground coffee 8  
Messages, display 48  
Milk  
Connecting milk 16  
Milk foam 20  
Milk system cleaning  
Cleaning the cappuccino frother 39  
Milk system rinsing  
Rinsing the cappuccino frother 38  
Milk, warm 20  
Rotary Switch 9  
S
Safety  
Important safeguards 4  
Settings  
Maintenance settings 30  
Permanent settings in programming  
mode 25  
Setting up  
Setting up the machine 10  
Switching off  
Machine 24  
Switching on  
Machine 23  
Switch-off  
P
Permanently setting the water for the cup  
size 21  
Permanent settings in programming mode  
25  
Power cord 9  
Power switch 9  
Preparation 17, 19  
Cappuccino 19  
Automatic switch-off 33  
Symbol description 3  
T
Technical data 52  
Telephone 56  
Transport 51  
Troubleshooting 49  
Two products 19  
Coffee 18  
Espresso 18  
Ground coffee 20  
Hot water 22  
Latte macchiato 19  
Milk 20  
U
Unit for amount of water 33  
Use, First-time 12  
Two specialty coffees 19  
Problems  
Troubleshooting 49  
54  
 
10 Index  
W
Warm milk 20  
Water hardness  
Determining the water hardness 15  
Setting the water hardness 31  
Water tank 8  
Descaling 47  
Filling 11  
Website 10  
55  
 
Art. 70565/XJ9/US-en/201208  
11 Co n t ac t s JURA / M en t io n s lég ales  
11 Co n t ac t s JURA / M en t io n s lég ales  
JURA Elek t r o ap p ar at e AG  
Kaffeewelt st rasse 10  
CH-4626 Ni ederbuchsi t en  
Sui sse  
USA : JURA CAPRESSO, Inc.  
Canada : FAEMA  
Serviceclient  
léphone / Fax  
E- m ai l  
1- 8 0 0 - 2 2 0 - 5 70 1  
1- ( 8 5 5 ) - 5 4 4 - 8 6 0 0  
contact@jura-capresso.com  
info@juracanada.ca  
Heures d’ouverture  
(HNE)  
du lundi au jeudi : 9 h – 21h  
vendredi : 9 h – 20 h  
samedi : 9 h – 17 h  
Adresse de vente  
81Ruckman Road  
Cl ost er, NJ07624  
001(201) 767-3999  
001(201) 767-9684  
115 M at h e so n Bo u lev ar d East  
Mississauga, Ontario, L4Z 1X8  
1- ( 9 0 5 ) - 5 0 1- 8 6 0 0  
léphone  
Fax  
Internet  
@ Vous t rouverez d‘aut res coordonnées de cont act pour vot re  
payssur lapage www.jura.com.  
Modificationstechniques Sousréservedemodificationstechniques. Lesillustrationsutilisées  
dans ce mode d’emploi sont stylisées et ne montrent pas les  
couleurs originales de la machine. Votre IMPRESSA peut différer par  
certains détails.  
Vos r éact i on Vot re avi s com pt e pour nous ! Ut i l i sez l e l i en de cont act m ent i onné  
Copyr i ght Ce mode d’emploi cont i ent des informations protégées par un  
copyright. Il est interdit de photocopier ou de traduire ce mode  
d’emploi dansunelangueétrangèresanslaccord écrit préalablede  
JURA Elek t r o ap p ar at e AG.  
56  
 

Insignia Flat Panel Television NS LCD15 User Manual
Intel Personal Computer BOXDC3217BY User Manual
Kathrein Satellite TV System 20210092 User Manual
Keating Of Chicago Fryer 7 05 User Manual
Kenwood Universal Remote RC R0801 User Manual
Kinyo Home Theater System D 655 User Manual
KitchenAid Range KERS807 User Manual
Klipsch Speaker RB 81 User Manual
Kompernass CD Player KH 2262 User Manual
Konica Minolta Fax Machine C220 User Manual