Kenwood Blender BL370 User Manual

BL370 series  
BL380 series  
 
 
G
G
G
before using your Kenwood  
appliance  
Read these instructions carefully and  
retain for future reference.  
Remove all packaging and any  
labels.  
Never blend more than the  
maximum capacity stated in the  
recommended speed chart.  
To ensure long life of your blender  
and mills, do not run for longer than  
60 seconds.  
Smoothie recipes - never blend  
frozen ingredients that have formed  
a solid mass during freezing, break it  
up before adding to the goblet.  
Don’t use the blender as a storage  
container. Keep it empty before and  
after use.  
Always use the blender on a secure,  
dry level surface.  
Never place this appliance on or  
near a hot gas or electric burner or  
where it could touch a heated  
appliance.  
G
G
G
Wash the parts: see ‘care and  
cleaning’.  
safety  
Switch off and unplug:  
G
G
G
G
G
before fitting or removing parts;  
when not in use;  
before cleaning.  
G
G
G
Never fit the blade unit to the  
power unit without the  
blender goblet or mill jar  
fitted.  
Always unplug the appliance before  
putting your hands or utensils in the  
goblet.  
Always take care when handling the  
blade assembly and avoid touching  
the cutting edge of the blades when  
cleaning.  
Only operate the blender with the lid  
in place.  
G
G
G
G
Misuse of your blender can result in  
injury.  
This appliance is not intended for  
use by persons (including children)  
with reduced physical, sensory or  
mental capabilities, or lack of  
experience and knowledge, unless  
they have been given supervision or  
instruction concerning use of the  
appliance by a person responsible  
for their safety.  
Children should be supervised to  
ensure that they do not play with the  
appliance.  
Only use the appliance for its  
intended domestic use. Kenwood  
will not accept any liability if the  
appliance is subject to improper use,  
or failure to comply with these  
instructions.  
G
G
G
G
Only use the goblet with the blade  
assembly supplied.  
Never let the power unit, cord or  
plug get wet.  
G
G
Never use a damaged appliance.  
Get it checked or repaired: see  
‘service and customer care’.  
Never use an unauthorised  
attachment.  
Liquids should be allowed to cool to  
room temperature before blending.  
Never leave the appliance  
unattended when it is operating.  
When removing the blender or mill  
from the power unit:  
G
G
G
G
G
wait until the blades have  
completely stopped;  
G
don’t accidentally unscrew the  
goblet or mill jar from the blade  
assembly.  
G
Never run the blender empty.  
2
 
before plugging in  
multi mill (if supplied)  
blender sealing ring  
blender blade assembly  
multi mill jar  
G
Make sure your electricity supply is  
the same as the one shown on the  
underside of the appliance.  
Important - UK only  
The wires in the cord are coloured  
as follows:  
Blue = Neutral  
Brown = Live.  
grinding mill (if supplied)  
mill jar  
grinding mill blade assembly  
G
G
G
grating mill (if supplied)  
mill jar  
grating mill blade assembly  
The appliance must be protected by  
a 3A approved (BS1362) fuse.  
to use your blender  
Note:  
Use your blender for soups, drinks,  
pâtés, mayonnaise, breadcrumbs,  
biscuit crumbs, chopping nuts and  
crushing ice.  
1 Fit the blender sealing ring into  
the blender blade unit - ensuring  
the seal is located correctly in the  
grooved area.  
Leaking will occur if the seal  
is damaged or incorrectly  
fitted.  
2 Screw the blade assembly onto the  
goblet - ensuring the blade  
assembly is fully tightened . Refer  
to the graphics on the underside of  
the blade unit as follows:  
For non-rewireable plugs the fuse  
cover MUST be refitted when  
replacing the fuse. If the fuse cover  
is lost then the plug must not be  
used until a replacement can be  
obtained. The correct fuse cover is  
identified by colour and a  
replacement may be obtained from  
your Kenwood Authorised Repairer  
(see Service).  
G
G
If a non-rewireable plug is cut off it  
must be DESTROYED  
IMMEDIATELY. An electric shock  
hazard may arise if an unwanted  
non-rewireable plug is inadvertently  
inserted into a 13A socket outlet.  
This appliance conforms to EC  
directive 2004/108/EC on  
G
- unlocked position  
- locked position  
Electromagnetic Compatibility and  
EC regulation no. 1935/2004 of  
27/10/2004 on materials intended  
for contact with food.  
3 Put your ingredients into the goblet.  
4 Put the filler cap in the lid.  
5 Fit the lid to the goblet and turn  
clockwise to lock.  
6 Place the blender onto the power  
unit with the handle situated to the  
right hand side and lock by turning  
clockwise until you hear a “click” .  
key  
blender  
filler cap  
locking lid  
goblet  
blender sealing ring  
blender blade unit  
power unit  
speed + pulse control  
cord storage  
G
The appliance won’t work if  
the blender is incorrectly  
fitted.  
7 Select a speed (refer to the  
recommended speed chart).  
3
 
blender hints  
to use your multi mill  
(if supplied)  
G
To blend dry ingredients - cut into  
pieces, remove the filler cap, then  
with the machine running, drop the  
pieces down one by one. Keep your  
hand over the opening. For best  
results empty regularly.  
The processing of spices is not  
recommended as they may damage  
the plastic parts.  
When making mayonnaise, put all  
the ingredients, except the oil, into  
the blender. Remove the filler cap.  
Then, with the appliance running,  
add the oil slowly through the hole in  
the lid.  
Thick mixtures, e.g. pâtés and dips,  
may need scraping down. If the  
mixture is difficult to process, add  
more liquid.  
Use your multi mill for milling herbs,  
nuts, coffee beans and purees.  
1 Put your ingredients into the jar .  
Fill it no more than half full.  
2 Fit the blender sealing ring into  
the blender blade unit - ensuring  
the seal is located correctly in the  
grooved area.  
G
G
G
Ensure that the seal is fitted  
correctly.  
3 Turn the blade unit upside down.  
Lower it into the jar, blades down .  
Turn anti-clockwise to lock.  
4 Place the mill onto the power unit  
and lock by turning clockwise until  
you hear a “click” .  
G
5 Select a speed or use the pulse  
control.  
blender recommended speed chart  
speed usage/food items  
max. quantity  
1
Frothing milk  
800 ml  
Light mixes e.g. batters, milkshakes,  
scrambled egg  
800 ml  
2
Soups & drinks  
Thicker mixes e.g. pâtés  
1.2 litres  
Mayonnaise  
3 eggs + 450ml  
oil  
Smoothie drinks  
Place the fresh fruit and liquid ingredients in  
first (includes yoghurt, milk and fruit juices)  
Then add ice or frozen ingredients (includes  
frozen fruit, ice or ice cream)  
800ml  
liquid  
Operates the motor in a start/stop action.  
(P)  
The pulse will operate for as long as it is held in  
pulse position.  
Ice crushing - operate in short bursts until  
6 cubes  
crushed to the desired consistency.  
4
 
to use your grinding mill to use your grating mill  
(if supplied)  
(if supplied)  
Suitable for grinding spices, coffee  
beans and processing ginger, garlic  
and chillies.  
Suitable for grating parmesan  
cheese, nutmeg, coconut and dried  
fruit.  
1 Place your ingredients into the blade  
assembly .  
1 Place your ingredients into the blade  
assembly .  
2 Fit the jar and turn anti-clockwise  
to lock .  
2 Fit the jar and turn anti-clockwise  
to lock .  
3 Place the mill onto the power unit  
and lock by turning clockwise until  
you hear a “click” .  
3 Place the mill onto the power unit  
and lock by turning clockwise until  
you hear a “click” .  
4 Select a speed or use the pulse (P)  
control.  
4 Select a speed or use the pulse (P)  
control.  
mill recommended speed chart  
ingredients  
mill  
max qty speed operating  
time  
Herbs - best chopped  
when clean and dry  
Multi  
15g  
2
5 – 10 secs  
Nuts  
Multi or Grinding  
Multi or Grinding  
Multi  
50g  
50g  
50g  
50g  
2
2
2
2
10 – 15 secs  
30 secs  
Coffee Beans  
Baby Foods & Purees  
30 secs  
Spices – such as black  
peppercorns, cardamom  
seeds, cumin seeds,  
Grinding  
30 – 60 secs  
coriander seeds, fennel  
seeds, whole cloves etc.  
Chillies  
Grinding  
Grinding  
Grinding  
30g  
30g  
2
2
2
2
10 secs  
10 secs  
10 secs  
10secs  
Fresh Root Ginger  
Garlic  
4 cloves  
60g  
Parmesan Cheese – cut Grating  
into 1cm cubes  
Dried Fruit  
Coconut  
Nutmeg  
Grating  
Grating  
Grating  
50g  
50g  
2
2
2
2
10 secs  
20 secs  
40 secs  
G
hints  
To release the maximum flavour and  
essential oils whole spices are best  
roasted prior to milling.  
G
For optimum performance when  
processing spices we recommend  
that you do not process more than  
50g at a time in the mill.  
G
Whole spices retain their flavour for a  
much longer time than ground  
spices so it is best to grind a small  
quantity fresh at a time to retain the  
flavour.  
5
 
care and cleaning  
service and customer  
care  
G
Always switch off, unplug and  
dismantle before cleaning.  
G
If the cord is damaged it must, for  
G
Empty the goblet before unscrewing  
safety reasons, be replaced by  
KENWOOD or an authorised  
KENWOOD repairer.  
it from the blade unit.  
G
Don’t immerse the blade unit in  
water.  
UK  
G
Do not place any parts in the  
If you need help with:  
dishwasher.  
G
using your appliance or  
power unit  
G
servicing, spare parts or repairs (in or  
G
Wipe with a damp cloth, then dry.  
out of guarantee)  
G
Don’t immerse the power unit in  
call Kenwood customer care on 023  
9239 2333. Have your model  
number (ie BL370) and date  
code (4 digit code ie 10D13)  
ready. They are on the underside of  
the power unit.  
water.  
G
Store excess cord in the storage  
area at the back of the power  
unit .  
blade assemblies  
blender and multi mill  
Remove the blade unit from the  
G
spares and attachments  
G
call 0870 2413653.  
goblet or mill by turning to the  
G
other countries  
Contact the shop where you bought  
your appliance.  
unlock position  
to release.  
grinding and grating mills  
Remove the blade unit from the jar  
by turning in a clockwise direction.  
G
G
Designed and engineered by  
Kenwood in the UK.  
Made in China.  
1 blender/multi mill: remove and  
wash the sealing ring.  
G
2 Don’t touch the sharp blades –  
brush them clean using hot soapy  
water, then rinse thoroughly under  
the tap. Don’t immerse the  
blade unit in water.  
3 Leave to dry upside down.  
other parts  
Wash by hand, then dry.  
6
 
carrot and coriander  
soup  
25g butter  
50g onion chopped  
1 clove garlic crushed  
480g carrot cut into 1 ⁄2 cm cubes  
cold chicken stock  
10-15ml (2-3tsp) ground coriander  
salt and pepper  
IMPORTANT INFORMATION FOR  
CORRECT DISPOSAL OF THE  
PRODUCT IN ACCORDANCE  
WITH EC DIRECTIVE  
1
2002/96/EC.  
1 Melt the butter in a pan, add the  
onion and garlic and fry until soft.  
2 Place the carrot into the liquidiser,  
add the onion and garlic. Add  
sufficient stock to reach the 1.2 L  
level marked on the goblet. Fit the  
lid and filler cap.  
At the end of its working life, the  
product must not be disposed of as  
urban waste.  
It must be taken to a special local  
authority differentiated waste collection  
centre or to a dealer providing this  
service.  
3 Blend on maximum speed for 5  
seconds for a coarse soup or longer  
for a finer result.  
4 Transfer the mixture to a saucepan,  
add the coriander and seasoning  
and simmer the soup for 30 to 35  
minutes or until cooked.  
Disposing of a household appliance  
separately avoids possible negative  
consequences for the environment and  
health deriving from inappropriate  
disposal and enables the constituent  
materials to be recovered to obtain  
significant savings in energy and  
resources. As a reminder of the need  
to dispose of household appliances  
separately, the product is marked with  
a crossed-out wheeled dustbin.  
5 Adjust the seasoning as necessary  
and add extra liquid if required.  
guarantee (uk only)  
If your blender goes wrong within  
one year from the date you bought  
it, we will repair it (or replace it if  
necessary) free of charge provided:  
G
you have not misused, neglected or  
damaged it;  
G
it has not been modified (unless by  
Kenwood);  
G
it is not second-hand;  
G
it has not been used commercially;  
G
you have not fitted a plug  
incorrectly; and  
G
you supply your receipt to  
show when you bought it.  
This guarantee does not affect your  
statutory rights.  
7
 
Head Office Address:  
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK  
Designed and engineered by Kenwood in the UK  
Made in China  
40427/1  
 

Intel Computer Hardware XP P5CM GL User Manual
Intel Home Care Product PHS6000 User Manual
Jenn Air Cooktop W10197057B User Manual
John Deere Compact Loader 160G LC User Manual
John Lewis TV Video Accessories JL3 95 CB User Manual
Kaito electronic MP3 Player KA800 User Manual
Kambrook Clock Radio KCR125 User Manual
Kenwood CD Player DPX301 User Manual
KitchenAid Clothes Dryer FRONT LOADING GAS DRYER User Manual
KitchenAid Ice Maker KUIS185EAL1 User Manual