SYSTEM-H2EV
Operating Instructions
and Installation Manual
8. Extra Power Supply Cord with
Fuse (for optional use by a
professional installer)
Table of Contents
SYSTEM-H2EV Package
Contents
Congratulations!
Tuner lets you enjoy SIRIUS Satellite Radio—over
Congratulations . . . . . . . . . . . . . . . . . .2
SYSTEM-H2EV Package Contents . . . . . . . . .2
Safety Precautions . . . . . . . . . . . . . . . .4
Your Here Everywhere™ Portable SIRIUS® Satellite
2
Unpack your Here Everywhere car kit and make
2
120 channels of satellite radio. The system-H2EV
9. Home Docking Cradle
sure that everything listed here is present:
Installation In A Vehicle . . . . . . . . . . . . . .6 includes everything you need for installation in
Installing the Antenna . . . . . . . . . . . . . . .9
2
3
1. Here Everywhere
a vehicle or home. If you’d like to install your
2
10. Home Power Supply
portable tuner
Here Everywhere Portable Sirius Satellite Tuner
Installation In A Home . . . . . . . . . . . . . .11
Finding a Location for the Antenna . . . . . . .11
Front-Panel Controls And Features . . . . . . .13
Remote Control Functions . . . . . . . . . . . .14
Activating Your SIRIUS Subscription . . . . . . .15
2
in an additional vehicle or boat, the KPA-H2EC
car kit is also available separately.
2. Remote control
Use this manual to familiarize yourself with all
11. Stereo Mini-Jack Cord
(Stereo Male RCA to
of Here Everywhere’s features and capabilities.
2
Removing Here Everywhere from the Car Cradle .16
3.5mm Male Mini Plug)
2
For the latest information about this and other
Kenwood products, visit the Kenwood USA
Basic Operation and Screens . . . . . . . . . .17
Selecting Channels . . . . . . . . . . . . . . .17
Setting/Using Channel Presets . . . . . . . . .20
Saving/Recalling Music Information . . . . . . .21
Song Seek (S-Seek) Feature . . . . . . . . . .22
Display Options . . . . . . . . . . . . . . . . .23
FM Transmitter Option . . . . . . . . . . . . . .24
Antenna Aiming . . . . . . . . . . . . . . . . .27
Memory Options . . . . . . . . . . . . . . . . .27
Clock Features . . . . . . . . . . . . . . . . . .27
Program Alert . . . . . . . . . . . . . . . . . .28
Specifications . . . . . . . . . . . . . . . . . .30
Troubleshooting Guide . . . . . . . . . . . . . .31
3. 2 x AAA batteries
12. Home Antenna
4. Car Docking Cradle
If anything is missing or damaged, or if your
Here Everywhere fails to operate, notify your dealer
immediately. If your Here Everywhere was shipped
2
to you directly, notify your shipper immediately.
Kenwood recommends that you retain the original
carton and packing materials in case you need
2
5. Cigarette lighter adapter
6. Car Magnetic-Mount Antenna
to ship your Here Everywhere in the future.
2
7. Car Windshield Docking Base
with suction cup
the proper rating. Using a fuse with the wrong
rating may cause the unit to malfunction.
• To prevent a short circuit when replacing a fuse,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential installa-
tion. This equipment may cause harmful interference
to radio communications if it is not installed and
used in accordance with these instructions. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
Safety Precautions
!
Warning
Take the following precautions to prevent fire and
avoid personal injury:
• To avoid short circuits, never put or leave any
!
Warning
first disconnect the wiring harness.
Take the following precautions to prevent traffic
accidents and avoid personal injury:
• When drilling holes to mount the unit, make sure
not to damage wiring or other systems that may
be close to the mounting surface.
Note: If the unit doesn’t seem to be working properly:
• Turn the unit’s power off, wait 5–10 seconds, then
metallic objects (coins, tools, etc.) inside the unit.
4
5
• Installation must be performed according to this
installation manual. Kenwood is not responsible
for issues arising from installations not performed
according to the procedures in this manual.
• Do not install the unit where it may obstruct your
view through the windshield or of your vehicle’s
indicator displays.
• Do not install the unit where it may hinder the
function of safety devices such as an airbag.
Doing so may prevent the airbag from functioning
properly in the event of an accident.
• If the unit emits smoke or strange smells, turn the
power off immediately and consult your Kenwood
dealer.
• Do not drop the unit or subject it to strong
shocks.
• If the LCD display becomes damaged or broken,
do not touch the liquid crystal fluid. The fluid may
be dangerous to your health or even fatal. If the
liquid crystal fluid contacts your body or clothing,
immediately wash it off with soap and water.
turn the power on again.
• If the unit still mis-operates, turn the unit’s
power off, remove it from the cradle, wait 5–10
seconds, replace it in the cradle, and turn the
power back on.
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment
and receiver
If the problem persists, consult your Kenwood dealer.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio/TV
technician for help
• The installation and use suggestions contained
in this manual are subject to any restrictions or
limitations that may be imposed by applicable
law—the purchaser should check applicable law
for any restrictions or limitations before installing
and/or operating this unit.
!
FCC Warning
Caution
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless the modifi-
cations are expressly approved in this instruction
manual. The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
Take the following precautions to keep the unit in
proper working order:
• Be sure the unit is connected to a 12V DC power
supply with a negative ground connection.
• Do not open the unit.
• Do not install the unit where it will be exposed to
high levels of humidity, moisture, or dust.
• When replacing a fuse, use only a new one with
Cleaning the Unit
• Failure to follow these safety instructions and
warnings may result in a serious accident.
If the unit becomes dirty, turn its power off and
wipe it clean with a soft, dry cloth.
Note: This equipment has been tested and found
to comply with the limits for a Class B digital device,
Do not use hard cloths or paint thinner, alcohol, or
other volatile solvents to clean the unit. These may
cause damage or remove indicator characters.
cup is on the windshield.
Then rotate the lever
down, keeping the button
pressed down at the
same time.
• The suction cup base
should be firmly
attached to the
windshield.
Suction cup base
!
Warning
Button
Lever
Do not operate the unit in a way that might divert
your attention from driving safely. As a driver, you
alone are responsible for safely operating your
vehicle in accordance with traffic safety laws at
all times.
6
7
ANT
DC 12V
AUDIO OUT
FM OUT
Base nut
Audio Output
FM Out (optional) Antenna Input
Power
Note: To remove the Car Windshield Docking Base,
return the lever to the up position before attempting
to remove the Base.
Pivot (where the
Cradle attaches)
Option 1: Windshield Mount
• Do not install Here Everywhere on the windshield
2
Installation in a Vehicle
if it may obstruct your view while driving.
Note: Do not put Here Everywhere in the Car
2
Option 2: Console
• Attach the Car Docking Cradle to the Car
Windshield Docking Base using the four
enclosed screws.
• Loosen the base nut on the Car Windshield Docking
Base so that the suction cup portion rotates easily.
Do not remove the base nut entirely.
Docking Cradle until you have completed the
cradle installation.
(Professional) Mount
Ask the dealer where you purchased your
Here Everywhere about professional installation
2
Step 1: Placing the Base
options. One option is to have the dealer mount
the Pivot of the Car Windshield Docking Base to
the console or other available location in the vehicle.
There are four screws to remove. The Pivot screw
holes match the AMPS standard for mounting
systems, so any AMPS-compatible bracket for your
vehicle will accept the Pivot of the Docking Base.
Many car audio dealers carry these brackets.
and Cradle
First, determine where you want to mount
• Make sure the suction cup lever is in the up
Here Everywhere.
position.
2
• Position the suction cup base
on the desired windshield
location. The word “PRESS”
should be upright.
There are two options for installing the
Here Everywhere. Select the option and location
2
that provides good visibility of and access to
Pivot
Here Everywhere’s front panel while maintaining
2
If you choose to do the console mount yourself,
please observe the following guidelines:
• Press the button marked
a safe driving experience.
Download from Www.Somanuals.com. All Manuals Search And Downlo“aPdR. ESS” while the suction
• Do not install Here Everywhere where it may
obstruct your view through the windshield or your
view of your vehicle’s indicator displays.
2
Step 3: Connecting Audio Step 4: Installing
You have two options to connect audio to
the Antenna
Here Everywhere in your vehicle:
• FM Station: Tune your vehicle radio to an unused
FM station, and using the Menu option on the
2
ANT
• Do not install Here Everywhere where it will
1. Turn Here Everywhere’s power off and remove it
2
DC 12V
2
AUDIO OUT
FM OUT
hinder your access to the vehicle’s controls.
from the cradle; unplug the cigarette lighter adapter
from the cigarette lighter; unplug the antenna from
the cradle.
8
9
• Do not install Here Everywhere where it may
2
Here Everywhere, select the same station. To use
2
hinder the function of safety devices such as an
airbag. Doing so may prevent the air-bag from
functioning properly in the event of an accident.
the Menu option, please see pg. 23. When using
2. Find an antenna location on a metal surface at least
12" x 12." The antenna should be mounted exactly
5.5" (the length of the antenna’s tail) away from the
vehicle’s rear window, as shown in the picture. The
antenna’s powerful magnets will secure it to the
metal surface. There is an optional antenna cable
protector, or tail, included with the car antenna.
Note: The best reception is achieved when the
antenna is mounted on the roof; mounting on the
trunk lid will work for convertibles. If the vehicle
has a roof rack or skid ribs, it may be necessary
to mount the antenna off-center.
Here Everywhere, make sure you’ve tuned to the
2
• Or, wire the Extra Power Supply Cord with Fuse to
the vehicle +12V battery line. Use caution
in wiring to your vehicle’s electrical system.
Kenwood recommends having an audio installer
professional perform this step.
same station as you have previously set in the
Menu setup.
• Find a location that provides good visibility of and
access to Here Everywhere’s front panel.
2
• Aux In: Or, if your vehicle radio has an Aux Input,
plug the supplied Stereo Mini-Jack Cord into the
back of the cradle, as shown on the right. Plug
the Stereo Mini-Jack Cord’s white (L ch.) and red
(R ch.) connectors into your car stereo. Because
the connectors may be in the back of the car
stereo, you may want to have an audio installer
professional perform this step.
• If using screws, be sure that you do not damage
wiring or other systems that may be close to the
mounting surface.
• Prior to mounting the Pivot, attach the Car
Docking Cradle to the Pivot using the four
enclosed screws.
ANT
DC 12V
AUDIO OUT
FM OUT
Tip: The Here Everywhere also has a Wired FM
Step 2: Attaching Power
2
Output. If you experience noise or other audio, you
may want to have a professional installer add a
connection from the Wired FM Output to the Car
antenna input. Consult your car audio dealer or
professional installer for assistance.
in a Vehicle
You have two options for powering the
Here Everywhere in your vehicle:
2
• Plug the cigarette lighter adapter into the back of
the cradle, as shown. Don’t plug the adapter into
the cigarette lighter until the installation is com-
pleted (see pg. 10, Step 6).
3. Route the cable from
the lowest point of
the rear window into
the trunk. Take
advantage of any
existing cable
Note: KENWOOD RECOMMENDS UNPLUGGING THE
CIGARETTE LIGHTER ADAPTER AFTER YOU TURN OFF
THE VEHICLE’S IGNITION. (In some vehicles, the
cigarette lighter remains active after the ignition
Finding a Location
Installation in a Home
Home Docking Station until you have completed
the installation.
1. Plug the audio cable’s mini connector into the
back of the cradle, as shown.
Note: Do not put the Here Everywhere in the
2
for the Antenna
Due to the paths of the SIRIUS satellites over the
U.S., the best location for the antenna will depend
on what part of the country you live in, the orientation
of your home, and the locations of any obstructions
that could prevent the satellite signal from reaching
the antenna. The best antenna location is on the
roof, facing straight up (see below).
has been turned off, and leaving Here Everywhere’s
2
cigarette lighter adapter plugged into the cigarette
lighter could drain the vehicle’s battery.)
10
11
channels or wiring
conduits.
6. Confirm that the antenna is mounted in a
good location.
• Make sure the vehicle is not in a garage
or somewhere the satellite signal could
be blocked.
2. Plug the audio
cable’s white (L ch.)
For SUVs, Minivans & 5-door Vehicles: Bring the
cable into the vehicle under the rubber molding for
the tailgate, and continue under the interior trim.
4. From the trunk, route the cable around the
passenger compartment and to the back of
the cradle.
ANT
AUDIO OUT
DC 12V
and red (R ch.)
connectors into your
audio system’s avail-
able audio input.
• The location of the “X” on the map on pg. 13
must be visible to the antenna.
• Slide Here Everywhere all the way into the cradle
2
3. Plug the AC cord into the power supply, then plug
the power supply into the back of the cradle, as
shown. Don’t plug the AC cord into a wall outlet
until the installation is completed.
4. Plug the antenna into the back of the cradle
until it is firmly seated, as shown.
so that the connector at the bottom of the unit
makes proper contact in the cradle. Press the
• Do not pull the cable across sharp edges
that could damage it.
• Keep the cable away from areas where
it could become tangled in driver’s or
passengers’ feet.
power ( ) button to turn Here Everywhere on.
2
• If your Here Everywhere has been properly
2
connected and the antenna is receiving the
SIRIUS signal (Preview Channel #184), you
will hear audio. If you do not hear audio, the
display will read “Acquiring Signal.” Re-orient
the antenna until you hear audio. (See Antenna
Aiming, on page 27 to use the ANTENNA
SIGNAL screen to aim the antenna.)
5. Plug the antenna into the
back of the cradle (right).
ANT
ANT
AUDIO OUT
DC 12V
AUDIO OUT
DC 12V
ANT
DC 12V
AUDIO OUT
FM OUT
The second-best antenna location is on an
outside wall.
• Select an appropriate wall, depending on where
you live (refer to the map on pg. 13). The location
of the “X” on the map must be visible to the
antenna.
• Mount the antenna facing as close to straight up
as possible (below, left).
• To minimize interference caused by roof exten-
sions, mount the antenna as low on the wall
as possible while avoiding other obstructions
(below, right).
The location of the “X” on the map must be
visible to the antenna.
• Place the antenna midway between the left and
right window frames.
• Tilt the hinged part of the antenna back to aim it
Use this map as a general placement guideline—
some experimentation may be needed to obtain the
best reception in your particular situation. See pg.
27, Antenna Aiming, for more information about
using the ANTENNA SIGNAL screen to aim the
antenna.
Front-panel Controls
and Features
Band
Memo
Display
Menu
towards the sky (below).
12
13
Power
Note: Objects such as the following can prevent the
antenna from receiving the satellite signal when
placed at a window or on an outside wall:
• roof extensions
• the window frame
Jump
Display
Cat.<
Cat.>
• metallic window
screens or tinting
The third-best antenna location is at a window.
Presets
Control Knob
• objects in the window
• Select an appropriate window, depending on
where you live (refer to the map on pg. 13).
• nearby objects like trees,
foliage, or buildings
Power ( ) Button: Turns Here Everywhere off and on.
2
Memo Button: Saves and recalls song and artist
information; enters S-Seek list mode (see pg. 22
for more on S-Seek).
Display Button: Switches the display between different
modes, with artist and song title information displayed
in various sizes; also used to enter Channel List mode.
Menu Button: Enters and exits setup mode.
Band Button: Cycles through the 5 banks of
presets; enters & exits the Preset Tune Mode.
Jump Button: “Jumps” over to a special stored
If you live in:
Section 1—Use a NORTHEAST or EASTFACING wall
or window
Section 2—Use a NORTHEAST or NORTHFACING wall
or window
Section 3—Use a NORTHWEST or NORTHFACING
wall or window
Section 4—Use a NORTHWEST or WESTFACING wall
or window
Section 5—Place the antenna ONLY ON THE ROOF
or ON AN OUTSIDE WALL
If the signal is blocked
from getting to the
antenna, the antenna
must be relocated to
a more appropriate
window, an outside
wall free of obstruc-
tions, or on the roof.
channel, such as a local traffic channel; then can
Power
Cat.<
Ch
be used to “jump” back to the previous channel.
Cat. (<, >) Buttons: Enters Category List Mode
and moves from category to category.
Preset Number Buttons, 1-6: Sets and selects
preset channels.
Control Knob: Turn to change channels or move
around in menus.
• Press to make selections in menus and lists
P. Tune Key: Switches back and forth between
Preset Tune Mode and Channel Tune Mode.
Activating Your SIRIUS
Subscription
Select
Cat.>
Back Key: Return to the most recently tuned
channel (previous channel).
Memo Key: Saves song and artist information.
Ch
Before you can listen to Here Everywhere, you must
2
subscribe to SIRIUS Satellite Radio’s service.
Mute
Jump
14
15
Note: You can activate your SIRIUS subscription
from either the car docking cradle or from the
home docking cradle. Once it is activated in one, it
will work in the other, provided the antenna has a
clear view to the sky.
Number Keys
Direct
Band
Display
Preset
P. Tune
Memo
Installing Batteries
in the Remote
• Press and Hold for about 2 seconds to go back
to a previous channel.
Note: Do not expose the remote control to high
temperatures or direct sunlight. This could damage
or deform the case and result in battery leakage
or other harm.
Back
Follow these steps to activate your service:
1. Make sure that Here Everywhere is properly
2
connected and that its antenna is oriented to
receive the SIRIUS satellite signal (see Installation
sections for details).
Remote Control Functions
Power ( ) Key: Turns Here Everywhere off and on.
2
List
1. Remove the battery cover as shown on the left.
2. Install two AAA batteries as shown on the right.
3. Replace the battery cover.
Select Key: Used to select items in a list after
navigating the list with CH Up and Down Keys.
CAT (<, >) Keys: Enters Category List Mode and
moves from category to category.
CH Up and Down Keys: Moves up and down one
channel (in Channel Seek mode), or one preset
(in Preset Seek mode).
to “jump” back to the previous channel.
Number Keys: Numbers 1-6 select preset channels
in the currently selected band. Numbers 0-9 are
used with the Direct button to tune directly to a
specific channel number.
2. Place Here Everywhere in the docking station by
2
sliding the unit all the way into the cradle so that
the connector at the bottom of the unit makes
proper contact in the cradle.
Direct Key: Enters Direct Tuning Mode.
3. Press the power button to turn Here Everywhere
2
Preset Key: When followed by Number Key 1-6,
stores the current channel as preset 1-6 in the
current bank.
Band Key: Cycles through the 5 banks of presets.
List Key: Enters and cycles between several list
Mute Key: Turns off the audio of Here Everywhere.
2
on. After displaying the SIRIUS logo, the display
will read “Acquiring Signal.” Once the SIRIUS
satellite signal is received, the display will
change to “Call 888-539-SIRIUS to Subscribe.”
Display Key: Switches the display between different
modes, with artist and song title information displayed
in various sizes.
Jump Key: “Jumps” over to a special stored channel,
such as a local traffic channel; then can be used
Modes: Channel, Artist, and Song Title.
Channel
number
Channel
name
Note: If the display reads, “Updating Channels,” the
receiver is getting the latest channel listing from the
SIRIUS satellites. Give it 5 minutes to complete
before moving to the next step.
you. (You can also contact SIRIUS on the
the “Activate” link.)
8. Once your subscription has been activated, the
display will read “Subscription Updated” for a
few seconds. Press any button. The
Press it again to see the list of currently playing
artists, and again to see the currently playing song
titles. Press the Control Knob (or on the remote, the
Select button) to return to the default screen.
Artist and
song title
Signal
strength
indicator
4. If your Here Everywhere has been properly con-
2
Preset bank
indicator
(A-E)
Selecting Channels
Category
name
Clock
nected and the antenna is receiving the SIRIUS
signal (Preview Channel #184), you will hear
audio. If you do not hear audio, re-orient the
antenna until you do. (See Antenna Aiming, on
pg. 27 to use the ANTENNA SIGNAL screen.)
16
17
Here Everywhere will return to the Default display
2
Direct Tuning Using the Control Knob
To enter a specific channel number, press the
Control Knob to enter Direct Tuning Mode. Turn the
Control Knob to select the first digit of the channel
number, then press the Control Knob to confirm
this choice. Repeat this step for the second and
third digits of the channel number.
screen. At this point, try turning the Control Knob.
You should have access to many channels now.
Basic Operation
After you have activated your SIRIUS subscription, the
Default Display screen will appear (see above). The
Default Display screen has two font sizes: Medium
and Large (medium is shown above). You can change
font sizes by pressing the Display button.
• Channel #184 is the SIRIUS Preview Channel.
You will not be able to tune to any other
channels until you activate your SIRIUS
subscription.
Note: For channels under 100, simply press the
control knob while the third digit is still blank.
Note: If you’ve previously activated your subscrip-
tion and then deactivated it, the Preview Channel
will be mute. You will still see the message, “Call
888-539-SIRIUS to Subscribe.”
Default Screen
On the above screen, you’ll see the current SIRIUS
channel number (021), the channel name, the
artist and song title, the category, the time, the
preset bank indicator (A), and the antenna signal
strength indicator. (When the unit is muted via the
remote Mute button, the antenna signal strength
indicator is replaced with a Mute indication.)
Direct Tuning Using the Remote
Press the Direct button on the remote to enter
Direct Tuning Mode. Use buttons 0-9 and the Select
button on the remote to enter the desired SIRIUS
channel number.
Removing Here Everywhere
2
From the Car Docking
5. Press the menu button on Here Everywhere to
2
enter the Menu Options. Make sure the first item,
“SIRIUS ID,” is highlighted, then press the Control
Knob (or the remote Select button).
Cradle
When docked in the Car Docking Cradle,
Here Everywhere has a secure locking mechanism
2
6. Your unit’s unique 12-digit SIRIUS ID Number will
be displayed. Write the number down, and have
your credit card handy.
7. You can also call SIRIUS toll-free at 1-888-539-
SIRIUS (7474), and the operator will instruct
Selecting Channels With
the Control Knob
To select a channel number through scrolling, turn the
Control Knob to the left or right to dial up or down
channels. The selected channel will automatically
Basic Operation and Screens
The previous screen is the Default screen. However,
you can choose several different screens. Press and
hold the Display button (press the List button on
the remote) to see a list of channels.
to hold it in place while the vehicle is in motion.
To remove Here Everywhere from the Car Docking
2
Cradle, press the small button on the back of the
unit and gently slide Here Everywhere out.
2
play. (You also do this by pressing the CH buttons
on the remote.) The name and artist of the currently-
playing song will scroll across the display. If you
want to listen to a different channel category, press
the left & right Cat. arrow buttons to activate the
Category Select screen (or press the Cat. buttons
on the remote).
1. Use the left & right Cat. buttons to select
channel categories.
2. When the category you want is highlighted, use
the Control Knob (or the remote CH buttons) to
highlight the channel you want to hear.
locked, the display will read “No Channels
Available” when that category is highlighted.
(See Add/Skip Channels Option on pg. 25.)
2. Use the Control Knob (or the remote CH buttons)
to move through the list of channels.
3. When the selection you want is highlighted, press
the Control Knob (or the remote Select button)
to play the channel. The display will automatically
return to the Default Display screen.
• After you make your selection, the display will
revert to the Default Display screen.
Selecting Music by Song
(Song List Mode)
1. Press and hold the Display button (or press the
List button on the remote) while in the Default
Display screen, then press the Display button (or
the remote Display button) until a list of songs is
shown. The Song List screen will appear, showing
all currently-playing songs, regardless of category:
Selecting Music
In addition to the Default Display screen and the
18
19
Category Select screen, Here Everywhere has three
2
Selecting Music by Artist
(Artist List Mode)
1. Press and hold the Display button (or press the List
button on the remote) while in the Default Display
screen, then press the Display button (or the remote
Display button) until a list of artists is shown. The
Artist List screen will appear, showing all currently-
playing artists, regardless of category:
ways to search for and select music: by channel, by
artist, and by song. You can search in this way with
List Mode. In List Mode, you will see a list of chan-
nels, or of currently playing artists, or of currently
playing songs.
Selecting Music by Channel
(Channel List Mode)
3. When the channel you want is highlighted, press
the Control Knob (or the remote Select button)
to listen to the channel. The display will revert to
the Default display screen for that channel.
4. If you decide not to select another channel,
press and hold the Control Knob for a few sec-
onds (or press the remote Back button) to exit
the mode. The display will revert to the Default
display screen for the active channel.
• If you do change channels while in Category List
Mode, you can switch back to the previously active
channel by holding the Control Knob for at least 2
seconds (or press the remote Back button).
1. Press and hold the Display button (or press the
List button on the remote) while in the Default
Display screen, then press the Display button (or
the remote Display button) until a list of channels
is shown. The Channel List screen will appear
showing all currently playing artists, regardless
of category:
• Song titles too long to fit on the highlight bar
will scroll.
2. Use the Control Knob (or the remote CH buttons)
to move through the list of songs.
3. When the song you want to hear is highlighted,
press the Control Knob (or the remote Select
button) to listen to it.
• After you make your selection, the display will
revert to the Default Display screen.
Note: In the Channel List, Artist List, and Song List
• If composer information is available for a chan-
nel, it will be displayed along with the artist
information.
2. Use the Control Knob (or the remote CH buttons)
to move through the list of artists.
3. When the artist you want to hear is highlighted,
press the Control Knob (or the remote Select
button) to listen to them.
• If no channels are available in a category, or if
all of the channels are set to be skipped or
Modes, if you don’t want to make a selection, press
and hold the Control Knob for 2 seconds on the
front panel (or press the Back button on the
remote) to exit the mode and return to the Default
Display screen for the active channel.
2. Select the channel you want to preset (see Basic
Operation and Selecting Channels, pg. 17).
3. Hold the number button you want to store the
channel in for at least 2 seconds (or, using the
remote, press the Preset button and press the
number button you want to store).
• The selected preset number will flash and then
remain lit on the display to show that it has
been memorized.
• A beep will also be heard to confirm that the
preset has been stored.
• If the preset button already has a channel
stored in it, it will be replaced with the new
channel.
Tuning Only to Preset Channels
Saving/Recalling
Music Information
Saving Music Information
You can store the name of the currently-playing
song and artist (and composer, if the data is avail-
able) into memory for recall later. Press the Memo
button to save the data. The screen will display the
following message:
(Preset Tune Mode)
You can limit tuning to only the channels you have
stored as Presets.
20
Setting/Using Channel
Presets
Setting Channel Presets
You can store up to 30 of your favorite channels as
presets for quick access. Presets are stored in 5
banks, labeled A through E, on the lower right-hand
corner of the display. Each preset bank contains 6
channel presets.
21
Hold the Band button for at least 1 second (or press
the P. Tune button on the remote) to enter the Preset
Tune Mode. The display will change to highlight the
active channel and the current Preset band.
Use the Control Knob (or the remote CH buttons) to
move through the Presets. Each time you change a
Preset, its number will appear on the display and
the channel will play.
1. Press the Band button to activate the preset
bank you want. The selected bank and Preset is
shown in the lower right corner of the Default
Display screen. For example, this picture shows
“A-1,” meaning Preset bank A, Preset channel 1.
If the current channel is not stored as a Preset,
the Preset bank will be displayed alone in the
same space.
• If the song has already been stored in memory,
the display will read “Already in Memory.”
Tuning Channel Presets
The 6 Presets in the active bank can be selected by
pressing the “1”–“6” buttons.
1. Press the Band button to cycle through the five
banks of Preset stations. The display will show
the current Preset bank and active Preset num-
ber in the lower right corner.
• You can save data for up to 24 songs. Once all
24 places have been filled, any new artist/song
data you save will replace the oldest data.
• You can lock a song so that it will remain on the list
even if you press the Menu button when 24 places
have been filled. The oldest unlocked song will be
deleted. See Lock/Unlock, in the next section
(“Recalling and Managing Music Information”).
Press the Band button to change Preset banks, just
as you would in Channel Tune Mode.
When you’re finished searching for a Preset, hold
the Band button for more than 2 seconds (or press
the P. Tune button on the remote) to return to
Channel Tune Mode.
2. When the desired Preset bank is displayed, use the
“1”–“6” buttons to tune the desired Preset channel.
To activate S-Seek, press and hold the S-Seek
(Memo) button, and the first song in memory will
be displayed. Use the Control Knob (or the remote
CH buttons) to scroll through the saved songs in
memory and select the desired song by pushing
the Control Knob.
erased by a newer song when you press the Menu
button. Note that it can be erased with the Clear All
Memory or Factory Defaults commands, however.
Delete: This selection will remove this artist/song
title pair from the memory list. The other pairs in
the memory list will remain.
• SID (SIRIUS ID Number)
• Display Settings
Recalling and Managing
Music Information
• Confirm Tone Options
• FM Transmitter Option
• Add/Skip Channels
• Device Lock Options
• Audio Level
• Antenna Aiming
• Memory Options
• Time Features
You can see the songs you’ve stored using the
Memo button. Press and hold the Memo button for
2 seconds. The display will change to show the first
artist and song title in memory, with “01” showing
in the top left corner of the screen to indicate that
this is the first entry in the list. Use the Control
Knob or the remote CH buttons to see each entry.
22
23
This will display the S-Seek menu. Highlight S-Seek
and push the Control Knob. S-Seek will present two
choices: “On” or “Off.” Select “On.” S-Seek is now
Display Options
Changing Display Modes
The Default Display screen has two display modes,
Normal (shown earlier in Basic Operation) and
Large Font.
activated. Here Everywhere will alert you if the
2
• Factory Defaults
While in this mode, you can also manage this list
by pressing the Control Knob (or remote Select
button). This will bring up the following menu:
song/artist selected is being played on any channel.
You have 10 seconds to make a choice or you can
press and hold the Select button (or press the
Back button on the remote) to cancel the alert.
To enter the Menu Options, press the Menu button
on the front panel. Use the Control Knob (or the
remote CH buttons) to move to the Menu feature
you want, and press the Control Knob (or the
remote Select button) to select the feature.
• Return to List
• S-Seek
• Lock/Unlock
• Delete
Note: When listing the memorized artist/song title
pairs, the display will include “S-Seek” on the top
line. Note that this won’t show up in the normal
displays—just in the memory list display.
To exit the Menu Options and return to the previous
operation mode, press the Menu button. The menu
button will back up to the previous screen, one
screen each press, until you exit Menu Options
entirely and return to the original display.
Return to List: This option will exit this menu
and return to showing the stored songs.
Press the Display button to cycle the display
between the two modes.
Lock/Unlock: When you press the Menu button, an
artist/song title pair is stored.
Song Seek (S-Seek): This feature allows you
to search for favorite songs that are playing while
you are listening to another station. To use this fea-
ture, the desired song has to be saved in the
memory first. (See previous section,
Menu Options
However, if the list is already at its 24-song limit,
the oldest artist/song title pair (least recently
stored) will be deleted to make room. To prevent
this from happening to a song, select this menu
option and choose “On”. This song will not be
From the Menu Options screen, you can access
and set up the following features:
“Saving/Recalling Music Information”. )
the Control Knob to save the change. Press the
Menu button to cancel changes and return to the
previous menu.
4. To exit the Channel Skip function, press the
Menu button.
• Frequency
• FM On/Off
SIRIUS ID Menu Option
When you select this option, the unit’s unique
12-digit SIRIUS ID Number will be displayed:
A channel marked as “skip” can still be tuned to by
using the remote’s Direct Tune feature. Also, if the
channel was programmed as a Preset, the Preset
will still tune the channel. To lock out a channel
completely, with security against changing, use the
Device Lock menu option.
The Frequency submenu allows you to select an
unused FM channel frequency. Check your vehicle
radio to find a quiet channel, then use this submenu
to select the same frequency. The default is 88.1MHz.
Auto Dimmer
This is an on/off setting. When on, the auto dimmer
will raise or lower the display brightness based on
the brightness of the room or vehicle. When off, the
display does not adjust to room lighting.
24
25
The FM On/Off menu controls whether the
Here Everywhere is transmitting on the FM channel
2
or not. Set this to “On” if you want to use the wire-
less FM feature. The default is “On”.
For each of these controls, use the Control Knob
(or the remote CH buttons) to select the desired
setting, then press the Control Knob (or the remote
Select button) to accept the new value. Press the
Menu button to exit without making any changes.
Device Lock Options
Display Settings
This option allows you to lock channels more
securely than with the skip feature. The lock feature
will prevent a channel from being tuned to without
the security code.
Press the Menu button to enter the Menu Options,
and select Display Settings with the Control Knob
(or the remote CH buttons). Press the Control Knob
(or the remote Select button) to enter the Display
Settings menu.
Add/Skip Channels Option
This allows you to select channels that you want to
skip when scanning up and down the Channel List
and Category List screens, or simply when you’re
using the Control Knob.
Confirm Tone Option
This is an on/off option to select whether
This option brings up a submenu with two
additional options.
Dimming Control on the
Display Settings Menu
This setting controls the brightness of the display.
Adjust the setting with the Control Knob and press
the Control Knob to save the change. Press the
Menu button to cancel changes and return to the
previous menu.
1. Use the Control Knob (or the remote CH buttons)
to highlight the channel you want to skip. (The
highlighted channel will automatically play.)
2. Press the Control Knob (or the remote Select
button) to change the highlighted channel’s status.
The word “skip” will appear after the channel name.
Here Everywhere beeps to confirm certain operations.
2
• Lock/Unlock
• Edit Code
FM Transmitter Option
This option controls the wireless audio feature of
Lock/Unlock
Upon entering this submenu for the first time, you
will be prompted to enter a 4-digit numerical code
that will be used to lock/unlock channel access.
Here Everywhere. This feature allows you to trans-
2
mit the Here Everywhere audio directly to your vehicle
2
radio on a specific (unused) FM channel. This
option brings up a submenu with the following
additional options:
3. To remove the “skip” from the channel, press the
Control Knob (or the remote Select button) again.
Contrast Control
This setting controls the contrast of the display.
Adjust the setting with the Control Knob and press
To enter a code:
1. Turn the Control Knob (or use the remote 0-9
buttons) to select the first digit of the code.
2. Press the Control Knob (or the remote Select
button) to keep that digit, and move to the
next digit.
assigned preset. In either case, you will be prompted
to enter the 4-digit code before the system will tune
to the channel, play audio from the channel, or display
text information from the channel. When the code is
accepted, the channel will play until you change
level on the stereo mini-jack to better match the
stereo system. Kenwood recommends leaving this
at the factory default level unless it is necessary to
change it. The most common use for this setting is
to adjust headphone volume levels if you are using
headphones directly plugged into the cradle.
Note: Most Menu screens automatically exit after a
few seconds without user input. The Antenna Aiming
screen is different in that it will stay until you press the
Control Knob, the Menu button, or the remote Select
button. This allows you to stay in this mode while you
adjust the antenna location to your satisfaction.
channels or until Here Everywhere is turned off.
26
27
2
3. Repeat these steps until all four digits are entered.
Note: To permanently remove the lock status from
the channel, return to the Lock/Unlock submenu
option and follow the previous steps.
Antenna Aiming
Memory Options
Here Everywhere will ask for the 4-digit code a sec-
2
ond time, to confirm.
Upon selecting this option, Here Everywhere’s top
This submenu has options that allow you to turn on
2
line displays two 10-segment horizontal bar graphs: or off the S-Seek feature (pop-ups to tell you that
your selected songs are playing), and to clear all
the songs stored with the Memo button.
Edit Code
All future entries into the Lock/Unlock submenu will
display the text “Lock/Unlock” on the top line and a Use this submenu option to change the 4-digit
channel list below it.
1. Use the Control Knob (or the remote CH buttons)
to highlight the channel you want to lock. (The
highlighted channel will automatically play.)
2. Press the Control Knob (or the remote Select
button) to change the highlighted channel’s
status. The word “lock” will appear after the
channel name.
One is labeled “SAT,” and shows the satellite
signal strength. The other is labeled “TER,” and
indicates the strength of the terrestrial (ground-
based) SIRIUS signal. The terrestrial SIRIUS
signal is only present in cities.
code, [0000]. On entering this submenu option,
you will be asked to enter the 4-digit code as
described in the previous section. Once the correct
code has been entered, you will be prompted to
enter a new 4-digit code, twice. The second entry is
requested for confirmation. Once confirmed, the
display will return to the Lock Options menu.
Auto Memory Search
This is an on/off selection to enable or disable
S-Seek pop-ups and alerts. Use the Control Knob
(or the remote CH buttons) to select “On” or “Off.”
Press the Control Knob (or the remote Select but-
ton) to accept the current setting.
Clear All Memory
Audio Level
3. To remove the “lock” from the channel, press the
This option will clear all the songs stored with the
Memo button. Use the Control Knob (or the remote
CH buttons) to select “Yes” or “No.” Selecting “Yes”
will remove all the songs stored by S-Seek, and
thereby remove all alerts.
Moving the antenna location may adjust the bar
graph signal strength indications and insure opti-
mum reception. Pressing the Control Knob, the
menu button, or the remote Select button returns
to the top level Menu Options.
Control Knob (or the remote Select button) again. This menu option allows you some control over the
volume of Here Everywhere. This is used in setting
2
• To exit the Lock/Unlock function, press the
Menu button.
up Here Everywhere with a home or vehicle stereo.
2
Typically, you will use the home or vehicle stereo
volume control after this setting is correct. This set-
ting can be used to raise or lower the output signal
Note: Locked channels can be accessed only by
the Remote’s Direct Tuning feature or by a previously
The following options appear in this submenu:
• Format
• Time Zone
• Daylight Savings Time
Note: If Here Everywhere is off (but with power, while
2
Alarm Clock
Time Features
in the Home Docking cradle) when the alarm time
comes, it will power itself on and present the option,
“Press Band to Snooze.” The Snooze option is a
9-minute delay until the alarm goes off again. Also,
you can press the Power ( ) button to cancel the
This menu option allows you to set Here Everywhere
2
This menu option allows you to control the clock,
alarm, program alerts, and other features that use
to turn itself on at a selected time, or, if the unit is
already on, beep and flash the display. The last
active channel prior to shutdown will be activated
when the Alarm goes off.
Here Everywhere’s internal clock.
2
Pressing the Select button enters the selected sub-
menu. Pressing the Menu button returns to the
Time Features submenu.
Here Everywhere has an internal clock which auto-
2
28
29
matically picks up Universal time from the SIRIUS
broadcast. After you set the Timezone and Daylight
Savings Time features, the clock will always keep
accurate time. However, the clock does require the
SIRIUS signal after the unit is connected to power
each time before it is valid. After you dock or power
alarm and shut Here Everywhere back off or any
2
The submenu below gives you two options:
• Set Alarm (or Clear Alarm, if it is already set)
• Alarm Time
other key to simply cancel the alarm and go to music.
Clock: Format
This option allows you to select between 12-hour
format, and 24-hour format.
Program Alert
This submenu option allows you to have
Alarm Clock: Set Alarm
This option allows you to enable or disable the
alarm, itself.
Here Everywhere alert you when a favorite
2
Clock: Time Zone
This option allows you to select one of the following
time zones:
program is scheduled to start. You can set the
program time and channel number in advance,
Here Everywhere, allow a few seconds to acquire
2
the clock signal.
and Here Everywhere will let you know at the
2
Note: When the alarm function is enabled, the
clock on the default screen will be highlighted.
The Time Features menu option presents the following
submenu choices:
appropriate time.
• (GMT -9:00) Alaska
• (GMT -8:00) Pacific (Factory Default)
• (GMT -7:00) Mountain
• (GMT -6:00) Central
• (GMT -5:00) Eastern
• (GMT -4:00) Atlantic
This submenu presents several options:
• Program Time/Day
• Channel Number
Alarm Clock: Alarm Time
• Clock
In this mode, you can change the alarm time as
follows: Use the Control Knob (or the remote CH
buttons) to select the hour. Press the Control Knob
(or the remote Select button) to save the hour, and
move the selection to the minutes. Use the Control
Knob to select the minutes, and press the Control
Knob (or the remote Select button) to save it. Use
the Menu button to cancel changes and exit back
to the Alarm Clock submenu.
• Alarm Clock
• Program Alert
• Auto Shutdown
• Sleep Mode
• Program Alert On/Off
• (GMT -3:30) Newfoundland
Program Alert: Program Time/Day
Use this selection to enter the date and time of
the preferred program.
Clock: Daylight Savings Time
Clock
This option sets whether or not your location observes
daylight savings time (not whether DST is in effect—
this is transmitted in the SIRIUS broadcast).
Selecting this menu option allows you to setup the
clock that is shown on the default display.
Program Alert: Channel Number
Use this selection to enter the channel of the
preferred program.
Program Alert: Program Alert On/Off
Use this selection to enable or disable the
Program Alert.
Troubleshooting Guide
Problem
Possible Cause
Corrective Action
No power on Here Everywhere
2
Power supply/cigarette lighter adapter
is not properly connected
Make sure power supply/adapter is
properly connected
(power indicator/display not illuminated)
Auto Shutdown
This gives you the option of having Here Everywhere
2
Blown fuse in cigarette lighter adapter
Check the fuse; if blown, replace with
supplied spare fuse
30
31
Here Everywhere not properly seated
2
Remove the Here Everywhere from cradle and
2
automatically shut off after a 1-hour idle period.
After 59 minutes of inactivity, a display prompt will
appear on the screen with the option “Cancel Auto
Shutdown.” Press the Control Knob (or the remote
Select button) to cancel the shutdown and restart
the idle timer.
in docking cradle
put it back in the cradle, taking care to seat
it securely in the cradle grooves
Car cigarette lighter socket fuse is blown
Use the cigarette lighter to test the car’s cigarette
lighter socket and fuse. If the cigarette lighter
doesn’t glow or get hot, check and replace
the fuse in the fuse panel. Note: use caution
with hot cigarette lighter.
No sound
Audio cable is not properly connected
Signal is weak or can’t be found
Make sure cable is properly connected
Display reads “Acquiring Signal”
Check the “Antenna Aiming” screen
(see pg. 27); Change the antenna/vehicle
location to maximize signal quality
Sleep Mode
This gives you the option to have the unit shut
down after a specific period of time: 15, 30, 45,
or 60 minutes.
Metallic window screen is
interfering with reception
Move antenna to window with a
non-metallic screen
Display reads “Antenna error”
The antenna is not connected
The antenna or cable is faulty
Verify antenna connections
Replace antenna
Display reads “Call 1-888-539-SIRIUS to
Subscribe”
SIRIUS subscription has not been activated,
or the specific channel is blocked by SIRIUS
Call SIRIUS to activate or update
your subscription
Factory Defaults
Display reads “Invalid Channel”
The channel number entered is invalid or
the channel does not exist
Select a different channel number
Select this menu option to restore Here Everywhere
2
to all factory defaults.
Here Everywhere operates erroneously
2
Microprocessor error
Turn the power off (press the Power
button); wait 5-10 seconds, then turn
the power on again
Specifications
Turn the unit’s power off; remove it from
the dock; wait 5-10 seconds; replace it
in the dock and turn power back on
Audio output (560 ohms)....................776mV RMS
Fuse ....................................................3A fast blow
Power supply requirements 9 ~ 16V, negative ground
Dimensions ......110mm(L) x 74mm(W) x 30mm(D)
If the problem persists, consult your
Kenwood dealer
Sound mutes intermittently
Metallic window screen is interfering
with reception
Move antenna to a window with a
non-metallic screen
1-800-KENWOOD
Main Office
2201 E. Dominguez St.
Long Beach, CA 90810-1009
P.O. Box 22745
Long Beach, CA 90801-5745
Canada Office
6070 Kestrel Road
Mississauga, Ontario L5T 1S8
Hawaii Office
Kenwood USA Corporation
1175 Kaweolka Avenue
Pearl City, HI 96782
©2004 Kenwood USA Corporation. All Rights Reserved.
The information in this catalog is subject to change
without notice.
042-1004 H2EV MAN
|