120V AC/DC Wire-in Smoke Alarm
Front Battery Door
Part Number 21006376
Model i12060
– Ionization Sensing Technology
– Front Loading Battery Door
– One button design (operates Smart Hush™ and test)
– Large mounting base
– 9V Battery Backup (included)
– Tamper resist feature
– Alarm memory
– Pre-stripped wiring harness with tinned strands
Description
Install Confidence:
The Kidde i12060 is an AC/DC powered, ionization
smoke alarm that operates on a 120V power source
with 9V battery backup.
Easy Installation
• Front battery pull tab allows battery activation without
removing alarm from mounting bracket.
• Large mounting base makes mounting easier, protects
surface paint from dirt and covers imperfections.
• Pre-stripped wiring harness with easy off cap does
not require stripper tool. Tinned strands increase
conductivity and wire nut grip
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Fewer Callbacks
• Front battery door makes replacing the battery
easy for anyone.
• One button design for easy operation and less
confusion. Operates Smart Hush™ and alarm test
• Battery run down protection will shut down alarm
memory when AC power is not present, reducing
low battery chirp.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of fire
that can occur within the home.
The front-loading battery door allows user to change
the battery without removing the alarm from the
mounting bracket making battery replacement easy
and convenient. This smoke alarm is available in a
6-piece cut case with tray for easy display as well as
a 6-piece bulk pack for contractors and property
owners. This unit is a UL Listed product with a 10-year
limited warranty.
• Dust cover protects sensor from contaminates during
construction reducing nuisance alarms
User-Friendly Features
• Tamper resist locking feature deters alarm theft
• Alarm memory flashes red LED indicating which unit
was the initiating alarm in interconnected system.
• Battery backup provides protection in case of
power failure
• Interconnectable with up to 24 devices (of which 18
can be initiating) including smoke, CO and heat alarms.
See user’s guide for complete instructions
SIGNALING
U
L
LISTED
|