Silhouette120V AC/DC Wire-in
Low Profile Smoke Alarm
Part Number 21007288
Model KN-SMFM-i
– Innovative low profile alarm design
– Ionization Sensing Technology
– One button design (operates Smart Hush™ and test)
Test verifies alarm operation
Hush silences nuisance alarms
– Sealed rechargeable battery backup (included)
will last the life of the alarm
– LED indicates alarm condition
– Alarm memory
– Pre-stripped wiring harness with tinned strands
Description
The Kidde Silhouette is a low profile AC/DC powered,
ionization smoke alarm that operates on a 120V power
source with a sealed rechargeable battery backup.
Install Confidence
Easy Installation
• Innovative low profile alarm fits in most common
electrical 2-gang and plastic, round boxes with
3 1/2” hole spacing.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
• Pre-stripped wiring harness with easy off cap does
not require stripper tool. Tinned strands increase
conductivity and wire nut grip.
Fewer Callbacks
• One button design for easy operation and less
confusion. Operates Smart Hush™ and alarm test.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to
help insure maximum detection of the various types
of fire that can occur within the home.
• Sealed rechargeable battery does not need to be
replaced for the life of the alarm.
User-Friendly Features
• Battery backup provides protection in case of
power failure.
This smoke alarm is available in a 4-piece cut case with
tray for easy display. This unit is a UL Listed product with
a 10-year limited warranty.
• Unit can be interconnected with up to 24 total
devices (12 smoke alarms and 6 heat alarms,
CO alarms or similar devices). See user’s guide
for complete instructions.
SIGNALING
U
L
LISTED
|