Konica Minolta Printer 1250E User Manual

PagePro 1250E Setup Guide  
English (1/2)  
Before setting up the printer, see the safety informa-  
tion in the User’s Guide, included in PDF format on the  
Utilities and Documentation CD-ROM.  
3
Install Optional Accessories  
5
Connect the Printer to a PC  
If you purchased a lower feeder unit, face-up output  
If you’re connecting the printer to a Macintosh, skip to  
the next section, “Connect the Printer to a Macintosh.”  
tray, and/or extra memory, install them now. Instruc-  
tions are included in the User’s Guide (in PDF format  
on the Utilities and Documentation CD-ROM).  
1
Remove the Packing Materials  
Minimum System Requirements  
Keep all of the packing materials in case you ever  
need to move the printer.  
IBM-compatible PC with a Pentium 133 MHz  
processor  
Windows XP/Me/2000/98/95/NT 4.0  
64 MB RAM  
15 MB free hard disk space  
IEEE 1284 Type B parallel port or USB port  
CD-ROM drive  
4
Set up the Printer  
Load Paper into Tray 1  
Parallel Interface (Windows XP/2000/Me/  
98/95/NT 4.0)  
CAUTION  
Using the wrong type of cable can damage the  
socket on the printer. Use only an IEEE 1284 type B  
shielded interface cable.  
1
Turn off both the  
printer and the  
PC.  
2
Connect one end  
of the interface  
cable to the  
parallel port of the  
PC.  
3
Connect the other  
end of the interface cable to the parallel interface  
connector on the back of the printer. Secure the  
cable using the two clips.  
4
5
Turn on the printer and then, when it’s ready, turn  
on the PC.  
2
Choose a Location  
Space Requirements  
If you’re using Windows XP/Me/2000/98, plug-  
and-play printer driver installation should start  
automatically. Follow the instructions on the  
screen.  
Provide enough space around the printer to  
ensure easy printer operation, paper and toner  
replacement, and maintenance.  
Connect the Power Cord  
If you’re using Windows 95/NT 4.0, or if plug-and-  
play doesn’t start automatically, use the instruc-  
install the printer driver manually.  
3.9" (100 mm)  
CAUTION  
Use only the power cord supplied with the printer.  
5.9"  
(150 mm)  
11.8"  
(300 mm)  
USB Interface (Windows XP/2000/Me/98)  
1
Make sure that the  
printer’s power  
switch is in the “O”  
(OFF) position.  
CAUTION  
3.9" (100 mm)  
35.1" (891 mm)  
Using the wrong type of cable can damage the  
socket on the printer. Use only a USB Revision 1.1  
compliant cable.  
2
Plug one end of the  
power cord that  
comes with the  
printer into the power cord socket on the back of  
the printer. Plug the other end into a power outlet.  
11.2"  
(285 mm)  
1
Turn off both the  
PC and the  
printer.  
Turn on the Printer  
2
3
Turn on the PC.  
Set the power switch to the “I”  
(ON) position. The printer is  
ready to use in approximately  
20 seconds. The green  
“Ready” indicator should be on  
(but not blinking) and the  
Turn on the  
printer.  
17.4" (441 mm)  
19.9" (505 mm)  
4
When Windows  
and the printer are  
both ready, connect one end of the interface cable  
to the PC’s USB port.  
Precautions  
orange “Error” indicator off.  
Set up the printer in a place that is  
5
6
Connect the other end of the interface cable to the  
USB interface connector on the back of the printer.  
dry and free from dust  
on a stable surface  
well ventilated  
near an easily accessible power socket  
away from objects which might obstruct the  
printer’s ventilation grille  
Test the Printer  
Plug-and-play printer driver installation should  
start automatically. Follow the instructions on the  
screen. If plug-and-play doesn’t start  
automatically, use the instructions in Section 7,  
“Install a Windows Driver,” to install the printer  
driver manually.  
Print a configuration page to ensure that the printer is  
operating correctly.  
1
With the green “Ready” indicator on  
(but not blinking) and the orange “Error”  
indicator off, briefly press the panel  
button. All indicators blink rapidly.  
away from highly flammable items (such as cur-  
tains)  
When asked to search for a driver, select “Display  
a list of all the drivers in a specific location, so you  
can select the driver you want,” and then locate  
the driver in the appropriate directory.  
away from splashing liquids  
away from organic gases (such as ammonia)  
away from direct sunlight  
away from severe temperature fluctuations  
away from exhaust-air from heating, ventilation,  
and air-conditioning systems  
2
Press the panel button two more times.  
A configuration page prints.  
Windows XP/2000/Me  
\drivers\language\win2000  
Windows 98  
\drivers\language\win9x  
 

JBL Car Speaker GT1000 User Manual
John Deere Battery Charger TY25864 User Manual
John Deere Compact Loader CT315 User Manual
JVC Camcorder DVL820 User Manual
Karcher Vacuum Cleaner BR VS 400 User Manual
Kawasaki Heat Gun 840015 User Manual
Kenmore Washer 4174110 User Manual
Kenwood Car Stereo System DDX8029 User Manual
Kenwood Computer Monitor LZ 760R User Manual
KitchenAid Garbage Disposal KCDS075T0 User Manual