DV9973CE3H_HA4ULL_ENG
DVD PLAYER
OWNER’S MANUAL
MODEL : DVX9900H
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL.
This product is manufactured to comply
with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC, 93/68/EEC
and 73/23/EEC.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol
is attached to a product it means the product
is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should
be disposed of separately from the municipal
waste stream via designated collection
facilities appointed by the government or the
local authorities.
3. The correct disposal of your old appliance
will help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about disposal
of your old appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No. ______________________________
Serial No. ______________________________
Date of Purchase_________________________
3
Random . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . .19
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
3D Surround . . . . . . . . . . . . . . . . . . . . . .19
Time Search . . . . . . . . . . . . . . . . . . . . . . . .19
Contents
Introduction . . . . . . . . . . . . . . . . . . .5
Symbol used in this Manual . . . . . . . . . . . . . .5
About the
Zoom
. . . . . . . . . . . . . . . . . . . . . . . . . . .20
. . . . . . . . . . . . . . . . . . .20
Symbol Display . . . . . . . . . . . .5
Marker Search
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Handling Discs . . . . . . . . . . . . . . . . . . . . . .5
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .5
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . . . . .6
Regional code . . . . . . . . . . . . . . . . . . . . . . . .6
Disc-related terms . . . . . . . . . . . . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control Operation . . . . . . . . . . . . . .9
Remote Control Battery Installation . . . . . . .9
Special DVD Features . . . . . . . . . . . . . . . . .20
Checking the contents of DVD discs: Menus .20
Title Menu . . . . . . . . . . . . . . . . . . . . . . . .20
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . .20
Camera Angle . . . . . . . . . . . . . . . . . . . . .20
Changing the Audio Language . . . . . . . . . .20
Subtitles
. . . . . . . . . . . . . . . . . . . . . . . . .20
Playing an Audio CD or MP3/WMA Disc . . .21
Audio CD and MP3 / WMA Disc Features . .22
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Moving to another Track . . . . . . . . . . . . . .22
Repeat Track/All/Off . . . . . . . . . . . . . . . . .22
Search . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Random . . . . . . . . . . . . . . . . . . . . . . . . . .22
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . .22
3D Surround . . . . . . . . . . . . . . . . . . . . . . .22
Programmed Playback . . . . . . . . . . . . . . . .23
Repeat Programmed Tracks . . . . . . . . . . .23
Erasing a Track from Program List . . . . . .23
Erasing the Complete Program List . . . . . .23
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .24
Slide Show . . . . . . . . . . . . . . . . . . . . . . . .24
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .24
Moving to another File . . . . . . . . . . . . . . . .24
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
To rotate picture . . . . . . . . . . . . . . . . . . . . .24
To listen to MP3/WMA music watching
picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Maintenance and Service . . . . . . . . . . . . . . .25
Playing a DivX Movie Disc . . . . . . . . . . . . . .26
Additional Features . . . . . . . . . . . . . . . . . . .27
Last Scene Memory . . . . . . . . . . . . . . . . . .27
Screen Saver . . . . . . . . . . . . . . . . . . . . . . .27
System Select . . . . . . . . . . . . . . . . . . . . . . . .27
Video Mode Setting . . . . . . . . . . . . . . . . . . . .27
Controlling other TVs with the remote control . . .27
Installation and Setup . . . . . . . . . .10
Setting up the Player . . . . . . . . . . . . . . . . . .10
DVD Player Connections . . . . . . . . . . . . . . .10
Video and Audio Connections to Your TV . .10
HDMI connection . . . . . . . . . . . . . . . . . . . .11
Audio Connection to Optional Equipment . .12
On-Screen Display . . . . . . . . . . . . . . . . . . . .13
Playback Status/Restrictions . . . . . . . . . . .13
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .14
General Operation . . . . . . . . . . . . . . . . . . .14
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .14
• Menu Language . . . . . . . . . . . . . . . . . . .14
• Disc Audio / Subtitle / Menu . . . . . . . . . .14
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .15
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . .15
• Display Mode . . . . . . . . . . . . . . . . . . . . .15
• TV Output Select . . . . . . . . . . . . . . . . . . .15
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . .15
• Dolby Digital / DTS / MPEG . . . . . . . . . . .15
• Sample Freq. (Frequency) . . . . . . . . . . . .15
• Dynamic Range Control (DRC) . . . . . . .15
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .16
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . .16
• B.L.E. (Black Level Expansion) . . . . . . . .16
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . . .16
LOCK (Parental Control) . . . . . . . . . . . . . .17
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . .17
• Password (Security Code) . . . . . . . . . . . .17
• Area Code . . . . . . . . . . . . . . . . . . . . . . .17
Reference . . . . . . . . . . . . . . . . . . . .28
Language Codes . . . . . . . . . . . . . . . . . . . . . . .28
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .30
Operation . . . . . . . . . . . . . . . . . . . .18
Playing a DVD or Video CD . . . . . . . . . . . . .18
Playback Setup
. . . . . . . . . . . . . . . . . . .18
General Features . . . . . . . . . . . . . . . . . . . . .18
Moving to another TITLE . . . . . . . . . . . . . .18
Moving to another CHAPTER/TRACK . . . .18
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Changing the Audio Channel . . . . . . . . . .18
Still Picture and Frame-by-Frame Playback . . .19
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . .19
4
Introduction
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
About the
Symbol Display
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes on Discs
Symbol Used in this Manual
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Not e:
Indicates special notes and operating features.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Tip :
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD
DVD and finalized DVD R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
JPEG
JPEG Discs
DivX
DivX Discs
5
Types of Playable Discs
Regional code
This DVD player is designed and
manufactured for playback of region “2”
encoded DVD software. This unit can
play only DVD discs labelled “2” or “ALL”.
DVD
2
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Notes on Regional Codes
Audio CD
(8 cm / 12 cm disc)
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
• If you try to play a DVD with a different region code
from your player, the message “Check Regional
Code” appears on the TV screen.
Notes on Copyrights:
Not es:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available or other functions may be added.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTEFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p
DVD PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
6
PBC: Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
Disc-related terms
DVD R / DVD RW
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded.
Title (DVD video discs only)
VCD (Video CD)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along with quality stereo sound.
MPEG
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Chapter (DVD video discs only)
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
Scene (VCD)
On a video CD with PBC (playback control) functions,
moving pictures and still pictures are divided into
sections called “scenes”. Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
WMA
Windows media audio file. A type of coding / decoding
developed by Microsoft Corp.
JPEG
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no limit
on the number of colours.
Track
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several tracks
of audio.
DivX
DivX is the name of a revolutionary new video codec
which is based on the new MPEG-4 compression
standard for video.You will be able to play DivX
movies using this DVD player.
7
Front Panel
POWER
Switches the player ON and OFF.
STOP ( x )
Stops playback.
OPEN / CLOSE ( Z )
Opens or closes the disc tray.
PLAY ( N )
Starts playback.
Disc Tray
Insert a disc here.
Display window
Shows the current
status of the player.
Remote Sensor
Point the DVD Player remote
control here.
8
Remote Control
OPEN / CLOSE
TV Control Buttons
Opens and closes the disc tray.
TV POWER:
POWER
Turns the TV on or off.
Switches DVD Player ON and OFF.
TV PR/CH +/–:
0-9 number buttons
Selects TV’s channel.
Selects numbered items in a menu.
TV VOL +/–:
CLEAR
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
Adjusts TV’s volume.
AV:
Selects the TV’s source.
SKIP (. / >)
SCAN ( m / M )
Search backward or forward.
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to
previous chapter or track.
PAUSE / STEP ( X )
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
STOP ( x )
Stops playback.
PLAY ( N )
Starts playback.
TITLE
Displays title menu, if available.
DVD MENU
Accesses menu on a DVD disc.
RETURN
Removes the setup menu,
displays the video CD with PBC.
b B v V (left/right/up/down) •
Selects an item in the menu.
• MARKER
Marks any point during
playback.
ENTER •
Confirms menu selection.
• SEARCH
DISPLAY
Displays MARKER SEARCH
menu.
Accesses On-Screen display.
AUDIO •
• PROGRAM
Selects an audio language (DVD).
Places a track on the program
list.
SUBTITLE •
Selects a subtitle language.
• ZOOM
Enlarges video image.
ANGLE •
Selects a DVD camera angle if
available
• REPEAT
Repeat chapter, track, title all.
SETUP •
• A-B
Accesses or removes setup menu.
Repeat sequence.
• RANDOM
Plays tracks in random order.
• RESOLUTION
You can change the resolution
depending on your TV.
Remote Control Operation
Remote Control Battery installation
Point the remote control at the remote sensor and
press the buttons.
Detach the battery cover on the rear of the
remote control, and insert two batteries
(size AAA) with
and
aligned correctly.
Do not mix old and new batteries and never
mix different types of batteries such as
standard, alkaline, etc.
9
Installation and Setup
Video: Connect the VIDEO OUT jack on the DVD
player to the video in jack on the TV using the
video cable (V).
Setting up the Player
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
S-Video: Connect the S-VIDEO OUT jack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S)
DVD Player Connections
SCART connection: Connect the TO TV scart jack
on the DVD Player to the corresponding in jacks on
the TV using the scart cable (T).
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
Component Video : Connect the COMPONENT
VIDEO OUT / (576p / 720p / 1080i) jacks on the
DVD Player to the corresponding in jacks on the
TV using an Y Pb Pr cable (C).
Rear of TV
SCART INPUT
• If your television is a high-definition or
“digital ready” television, you may take
advantage of displaying the highest video
resolution possible.
VIDEO
INPUT
COMPONENT VIDEO
/
AUDIO INPUT
PROGRESSIVE SCAN INPUT
Y
L
Pr
Pb
R
• If your TV does not accept your resolution
setting, abnormal picture appears on the screen.
Please read TV’s owner’s manual then set the
resolution that your TV can accept.
C
A
V
T
Resolution setting
You can change the resolution for the COMPONENT
VIDEO OUT / (576p / 720p / 1080i) video output by
pressing RESOLUTION on the front panel. Available
resolution settings are as shown below.
OUTPUT
Available Resolution
CONNECTION
PAL
NTSC
HDMI
VIDEO OUT
1920 x 1080i
1280 x 720p
720 x 576p
1440 x 576i
1920 x 1080i
1280 x 720p
720 x 480p
1440 x 480i
Rear of DVD player
Ca u t ion :
1920 x 1080i
1280 x 720p
720 x 576p
720 x 576i
1920 x 1080i
1280 x 720p
720 x 480p
720 x 480i
You must set the TV Output Select option to use
COMPONENT VIDEO OUT/ (576p / 720p / 1080i)
and SCART jacks.
COMPONENT
VIDEO OUT
(See “TV Output Select” on page 15.)
VIDEO OUT
S-VIDEO
720 x 576i
720 x 576i
720 x 480i
720 x 480i
Video and Audio Connections to Your TV
SCART
720 x 576i
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
Not es:
• For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 576p(PAL) or 480p(NTSC)
resolution.
• 1080i, 720p, 576p and 480p do not work with the
analogue video connections (VIDEO OUT, SCART &
S-VIDEO).
Audio: Connect the left and right AUDIO OUT
jacks of the DVD Player to the audio left and right
IN jacks on the TV (A) using the audio cables.
Do not connect the DVD Player’s AUDIO OUT jack
to the phone in jack (record deck) of your audio
system.
10
HDMI connection
If you have an HDMI TV or monitor, you can connect it
to this player using an HDMI cable.
HDMI compatible TV
HDMI
1. Connect the HDMI OUT jack on the player to the
HDMI jack on an HDMI compatible TV or monitor
(H).
H
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
3. Press RESOLUTION repeatedly to select the
resolution you wish to change.
Not es :
Rear of DVD player
• Both PCM and Bitstream Audio out is available,
when the sample frequency is set to 48kHz in HDMI
connection.
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
an easy all- digital output to an HDMI or
DVI-equipped TV.
• If Audio setup is set to bitstream and your TV does
not support Bitstream Audio out in HDMI
connection, audio sound is converted to PCM.
Connection to an HDMI TV requires an HDMI cable
while connection to a DVI-equipped TV requires an
HDMI to DVI adapter.
• If Audio setup is set to bitstream and the sound is
distorted, check your TV’s audio capability and set
the Audio setup to PCM.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio. HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors): communication
between the AV source and AV devices such as
Digital Televisions.
• The arrow on the cable connector body should face
up for correct alignment with the connector on the
player.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
• If there is noise or lines on the screen, please check
the HDMI cable.
• Not all HDCP-compatible DVI devices will work with
this DVD player.
• If TV does not support HDCP, snow noise appears
on the screen.
Tip :
When you use HDMI connection, you can change the
resolution (576i, 576p, 720p, 1080i) for the HDMI
output by pressing the RESOLUTION button on the
remote control.
11
Amplifier equipped with 2-channel analogue stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD player to the
audio left and right IN jacks on your amplifier, receiver,
or stereo system, using the audio cables (A).
Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment
for audio output.
Amplifier equipped with 2-channel digital stereo
(PCM) or Audio / Video Receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS): Connect one of the DVD Player’s DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your Amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
Rear of DVD player
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel audio
/ video receiver that supports one or more of the audio
formats supported by your DVD player such as MPEG
2, Dolby Digital and DTS. Check the receiver manual
and the logos on the front of the receiver.
X
A
O
Not es:
•
If the audio format of the digital output does not
match the capabilities of your receiver, the receiver
produces a strong, distorted sound or no sound at all.
L
R
COAXIAL
OPTICAL
DIGITAL INPUT
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
• To see the audio format of the current DVD in the
on-screen display, press AUDIO button.
12
Example: On-Screen Display during
playing DVD Video
On-Screen Display
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Items
Selection Method
b
/
B
ENTER
, Numbers
Title Number
1 / 3
1. Press DISPLAY during playback.
b
/
B
ENTER
, Numbers
Chapter Number
Time search
1 / 12
2. Press v / V to select an item.
The selected item is highlighted.
Numbers, ENTER
0:20:09
3. Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Audio language
and Digital Audio
Output mode
b
AUDIO
/
B
or
b
/
B
or
Subtitle language
Angle
ABC
1 ENG
1 / 3
SUBTITLE
Not es:
• Some discs may not provide all of the features
shown below.
b
ANGLE
/
B
or
3D SUR
Sound
• If no button is pressed for 10 seconds, the on-
screen display disappears.
b
/
B
Playback Status/Restrictions
Example: On-Screen Display during
playing VCD
Title
Repeat title
A - B
Repeat sequence
Items
Selection Method
1 / 9
Enter a Marker
b
/
B, Numbers
Track Number
(or PBC mode)
1 / 3
ENTER
MARKER SEARCH
Marker Search menu
Numbers
ENTER
Time search
0:20:09
Resume play from this point
Action prohibited or not available
b
AUDIO
/
B
or
Audio Channel
Sound
3D SUR
b
/
B
Example: On-Screen Display during
playing Divx movie disc
Items
Selection Method
b
/
B
ENTER
, Numbers
Track Number
1 / 3
Numbers, ENTER
Time search
0:20:09
Audio language
and Digital Audio
Output mode
1
b
AUDIO
/
B
or
MP3
b
/
B
or
Subtitle language
Sound
ENG
ABC
SUBTITLE
3D SUR
b
/
B
13
LANGUAGE
Initial Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 14 to 17.
English
Original
Off
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Original
To display and exit the Menu:
Move
Select
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
Menu Language
Select a language for the Setup menu and on-screen
display.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
DVD
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
General Operation
Original: Refers to the original language in which the
disc was recorded.
1. Press SETUP. The Setup menu appears.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Other: To select another language, press number buttons
then ENTER to enter the corresponding 4-digit number
according to the language code list in the reference chapter.
If you enter the wrong language code, press CLEAR.
3. Use v / V to select the second desired option then
press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
14
DISPLAY
AUDIO
DISPLAY
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
TV Aspect
16
:
9
Display Mode
TV Output Select
Widescreen
RGB
AUDIO
Dolby Digital
DTS
Bitstream
Bitstream
PCM
MPEG
Sample Freq.
DRC
48 kHz
On
Move
Select
Vocal
On
DVD
TV Aspect
Move
Select
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 TV is connected.
DVD
DivX
Dolby Digital / DTS / MPEG
Bitstream: Select “Bitstream” if you connect the
DVD Player’s DIGITAL OUT jack to an amplifier or
other equipment with a Dolby Digital, DTS or
MPEG decoder.
DVD
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM audio.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
Off (for DTS): If you select “Off”, the DTS signal is
not output through the DIGITAL OUT jack.
TV Output Select
DVD
Sample Freq. (Frequency)
Set the player’s TV Output Select options according to
the TV connection type.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
YPbPr: When your TV is connected with the
COMPONENT VIDEO OUT/ (576p / 720p / 1080i)
jacks on the DVD player.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without
any further processing.
Not es:
• If you are playing this unit with scart connection
while HDMI jack is connected, set the resolution to
576i.
Check the documentation for your amplifier to verify
its capabilities.
DVD
DivX
• The resolution is unchangeable, if the TV Output
Select option is set to RGB while the HDMI jack is
not connected.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
• You can change the TV Output Select option only
when the resolution is set to 576i.
presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic range
of the audio output (the difference between the loudest
sounds and the quietest ones). This allows you to listen
to a movie at a lower volume without losing clarity of
sound. Set DRC to On for this effect.
Vocal DVD
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
15
OTHERS
DivX
DivX(R) VOD
You can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
The PBC, Auto Play, B.L.E. and DivX(R) VOD settings
can be changed.
OTHERS
PBC
On
Auto Play
B.L.E.
Off
On
DivX(R) VOD
Select
The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rent an
encrypt movie file.
Select
Move
PBC VCD
Not es:
Set Playback Control (PBC) to On or Off.
If you rent the DivX VOD file, it has several options of
viewing limits as shown below.
On: Video CDs with PBC are played according to
the PBC.
• Display the number which you can watch the file.
Off: Video CDs with PBC are played the same way
as Audio CDs.
DVD
Auto Play
You can set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
• The rental has been expired.
On: Auto Play function is active.
Off: Auto Play function is not active.
Not e:
The Auto Play function may not work for some DVDs.
• Display the authorization error.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Not e:
The B.L.E. function works NTSC system only.
16
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
LOCK
Rating
Unlock
New
1. Select Password on the LOCK menu then press B.
Password
Area Code
SE
D E
2. Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3. Enter the new 4-digit code, then press ENTER.
Input it again to verify.
Move
Select
4. Press SETUP to exit the menu.
DVD
Rating
If you forget your Security Code
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer more suitable scenes as an
alternative.
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
3. Enter a new code as described above.
DVD
Area Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter.
1. Select “Rating” on the LOCK menu then
press B.
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
1. Select “Area Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select the first character using v / V buttons.
4. Press ENTER and select the second character
using v / V buttons.
3. Select a rating from 1 to 8 using the v / V buttons.
5. Press ENTER to confirm your Area code selection.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Not e:
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
17
Operation
Playing a DVD or Video CD
Playback Setup
General Features
Not e:
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
1. Turn on the TV and select the video input source
connected to the DVD player.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD player.
DVD
Moving to another TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY while playback is
stopped then the appropriate number (0-9) or use
b / B to move to another title.
3. Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE to close the tray.
Press PLAY.
You can play any title by inputting its number while
playback is stopped.
In some cases, the disc menu might appear
instead:
Moving to another CHAPTER/TRACK
DVD
DVD
VCD
DivX
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
screen.
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
•
Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
VCD
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating
procedures may differ. Follow the instructions on
each menu screen. You also may set PBC to
Off (See “PBC” on page 16).
•
•
Press SKIP . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
Not es:
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 17.)
DVD
VCD
DivX
Search
• DVDs may have a region code. Your player does
not play discs that have a region code different from
your player. The region code for this player is 2
(two).
1. Press SCAN (m or M) during playback.
2. Press SCAN (m or M) repeatedly to select the
required speed.
DVD, DivX disc; X2, X4, X16 or X100
Video CD; X2, X4 or X8
3. To exit SEARCH mode, press PLAY.
Changing the Audio Channel VCD
Press AUDIO repeatedly during playback to hear a
different audio channel (Stereo, Left, or Right).
18
Still Picture and Frame-by-Frame Playback
VCD1.1
Repeat DVD
DivX
DVD
VCD
DivX
You can play a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
1. Press PAUSE/STEP on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
2. To exit still motion mode, press PLAY.
Slow Motion DVD
VCD
DivX
• Off : does not play repeatedly.
Video CDs, DivX discs - Repeat Track/All/Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
1. Press PAUSE/STEP (X) during playback.
The DVD player will now go into PAUSE mode.
2. Use the SCAN (m or M) to select the required
speed: t 1/16, t 1/8, t 1/4, or t 1/2
(backward), or T 1/16, T 1/8, T 1/4, or T 1/2
(forward).
Not es:
• On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the repeat function (See “PBC” on
page 16).
With a DivX Disc and Video CD, the Slow speed
changes: T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
3D Surround DVD
VCD
DivX
3. To exit Slow Motion mode, press PLAY (N).
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
Not e:
Slow motion playback in reverse is not possible with
Video CDs and DivX Discs.
1. Press DISPLAY during playback.
Random VCD
Karaoke DVD
2. Use 3 or 4 to select the sound option.
1. Press RANDOM during playback. The unit
automatically begins random playback and
RANDOM appears on the TV screen.
The sound option will be highlighted.
3. Use 1 or 2 to to select “3D SUR”.
To turn off the 3D Surround effect, select “Normal”.
2. Press RANDOM again to normal.
Time Search DVD
VCD
DivX
Tip :
By pressing SKIP > during random playback, the unit
selects another title (track) and resumes random playback.
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
Not e:
On a Video CD with PBC, You must set PBC to Off on the
setup menu to use the random function (See “PBC” on page
16).
2. Press v / V to select the time clock icon and
“-:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
Repeat A-B DVD
VCD
DivX
To repeat a sequence.
4. Press ENTER to confirm. Playback starts from the
selected time.
1. Press A-B at your chosen starting point. “ A
appears briefly on the TV screen.
”
*
2. Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press A-B again to cancel.
19
Special DVD Features
Zoom DVD
VCD
DivX
Use zoom to enlarge the video image.
Checking the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
b B v V buttons to highlight your selection.
Then press ENTER.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
Title Menu DVD
Screen fit mode:
You can change the way the image appears on
the screen when you’re playing a DVD movie.
Press 3/4 to select between Normal, Enhanced,
and Maximum.
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may appear.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and
chapters for the title.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press CLEAR button.
3. Press TITLE to exit.
Not es:
Disc Menu DVD
• Zoom may not work on some DVDs.
• Screen fit mode is available for playing the DVD disc
and movie file.
Press DVD MENU and the disc menu is displayed.
Press DVD MENU again to exit.
Marker Search DVD
To enter a Marker
VCD
DivX
Camera Angle DVD
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
Tip :
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
The angle indicator will blink on the TV screen during scenes
recorded at different angles as an indication that angle
switching is possible.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
Changing the Audio Language DVD
DivX
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
4. You can play any marker by inputting its number
on the marker search menu.
Subtitles DVD
DivX
Press SUBTITLE repeatedly during playback to see
the different subtitle languages.
Not e:
If there is no information or there is a code that can
not read in the DivX file, “ 1 ” etc are displayed.
20
Playing an Audio CD or MP3/WMA
Disc
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
The DVD player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as /
? * : “ < > l etc.
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
AUDIO CD
0:52:07
List
1 / 12
Program
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Track8
Clear All
PROGRAM Edit
• The total number of files on the disc should be
less than 650.
MP3 / WMA
This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see
above) to ensure compatible playback.
1. Press v / V to select a folder, and press ENTER
to see the folder contents.
2. Press v / V to select a track then press PLAY or
ENTER. Playback starts.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Clear All
DISPLAY Info
PROGRAM Edit
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY.
[ Title, Artist, Album, Year, Comment ]
• If there is no information, “NO ID3 TAG” appear on
the display.
Tip s:
• If you are in a file list on the MUSIC menu and want to
return to the Folder list, use the v / V to highlight
and
press ENTER.
• Press DVD MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
21
CD
MP3
WMA
Audio CD and MP3 / WMA Disc
Features
Random
1. Press RANDOM during playback. Random
Playback begins immediately and RANDOM
appears on the menu screen.
CD
MP3
WMA
Pause
2. To return to normal playback, press RANDOM
repeatedly until RANDOM disappears from the
menu screen.
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY, ENTER or
press PAUSE/STEP again.
Tip :
By pressing SKIP > during random playback, the unit
selects another track and resumes random playback.
CD
MP3
WMA
Moving to another Track
1. Press SKIP (. or >) briefly during playback
to go to the next track or to return to the beginning
of the current track.
CD
Repeat A-B
1. To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and “A” appear on the menu screen.
2. Press SKIP . twice briefly to go back to the
previous track.
2. Press A-B again at your chosen end point. The
Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play
repeatedly.
3. You can play any track by inputting its number.
CD
MP3
WMA
Repeat Track/All/Off
You can play a track/all on a disc.
3. To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the menu screen.
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
CD
3D Surround
• Track: repeats the current track
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
Not e:
If you press SKIP (>) once during Repeat Track playback,
the repeat playback cancels.
1. Press AUDIO during playback.
“3D SUR.” appears on the menu screen.
2. To return to normal playback, press AUDIO
repeatedly until “3D SUR.” disappears from the
menu screen.
CD
MP3
WMA
Search
1. Press SCAN (m or M) during playback.
2. Press SCAN (m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
3. To exit SEARCH mode, press PLAY.
22
5. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
Programmed Playback
The program function enables you to store your
favourite tracks from any disc in the player memory.
A program can contain 30 tracks.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC)
list and then press PLAY.
1. Insert a disc.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2. Press PROGRAM.
E
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
The
mark will appear to the right of the word
“Program” on the right side of the menu screen.
2. Press REPEAT to select a desired repeat mode.
Not e:
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
E
Press PROGRAM again, then the
mark will
disappear to exit the Program Edit mode.
Not e:
MUSIC
0:00:00
AUDIO CD
0:52:07
1
/
12
1
/
12
If you press > once during Repeat Track playback,
the repeat playback cancels.
List
List
E
E
Program
Track5
Program
2-Music2
Track1
Track2
Track3
Track4
Track5
Track7
Track4
Track1
4-Music4
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
6-Music6
1-Music1
Track6
Track7
Track8
Erasing a Track from “Program” List
Clear All
Clear All
PROGRAM Edit
DISPLAY Info
PROGRAM Edit
1. Use v V B to select the track that you wish to
erase from the Program list.
Audio CD Menu
MP3/WMA Menu
2. Press CLEAR. Repeat to erase additional tracks
on the list.
Video CD: Press PROGRAM while playback is
stopped. The program menu appears. Press
PROGRAM again and hold it down for a few
seconds to exit the menu.
Erasing the Complete Program List
1. Press B to move to the “Program” list.
Not e:
2. Use v / V to select “Clear All”, then press ENTER.
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the programmed playback
(See “PBC” on page 16).
Not e:
The programs are also cleared when the disc is
removed.
VIDEO CD
List
Track1
E
Program
Track5
Track2
Track3
Track4
Track5
Track2
Track3
Track1
Clear All
Video CD Menu
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing on the
“Program” list.
23
JPEG
Viewing a JPEG Disc
Moving to another File
Press SKIP (. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
Using this DVD Player you can view discs with JPEG
files.
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
JPEG
Zoom
PHOTO
Use zoom to enlarge the photo image.
(see 20 page)
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
To rotate picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
Listen to MP3/WMA Music and view your Images
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list, use the v / V buttons on the remote to
JPEG
You can display image files while listening to MP3/WMA
music files recorded on the same disc.
highlight
and press ENTER.
1. Insert the disc containing the two types of file in
the player.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
While viewing a file, you can press STOP to move
to the previous menu (PHOTO menu).
2. Press TITLE to display PHOTO menu.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
Playback starts. The playback will continue until
Tip s:
STOP is pressed.
• Press DVD MENU to move to the next page.
Tip :
• There are three Slide Speed options
(Normal) and > (Slow).
: >>> (Fast), >>
To listen to ONLY the desired music with your images,
programme the desired tracks from the “MUSIC”
menu and then proceed as above.
Use v V b B to highlight the Speed. Then, use b / B to
select the option you want to use then press ENTER.
• On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
JPEG disc compatibility with this player is
limited as follows:
• Press RETURN, information of file is hidden.
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
2048 pixels and burn another disc.
JPEG
Slide Show
Use v V b B to highlight the
(Slide Show) then
press ENTER.
JPEG
Still Picture
• The total number of files and folders on the disc
should be less than 650.
1. Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
• Some discs may be incompatible due to a
different recording format or the condition of disc.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD player. Even though
the files are shown as JPEG image files in
Windows Explorer.
24
Maintenance and Service
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
25
Playing a DivX Movie Disc
DivX disc compatibility with this player is limited
as follows:
Using this DVD Player you can play DivX disc.
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a disc and close the tray. The MOVIE
menu appears on the TV screen.
• The file name of the DivX subtitle is available by
56 characters.
MOVIE
0:00:00
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
Movie Folder 8
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
2. Press v / V to select a folder, and press
ENTER. A list of files in the folder appears. If
you are in a file list and want to return to the
Folder list, use the v / V buttons on the
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
• If the file is recorded with GMC, the unit
supports only 1-point of the record level.
remote to highlight
and press ENTER.
GMC?
*
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or
PLAY.
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
4. Press STOP to exit.
Tip s:
Playable DivX file
• Press DVD MENU to move to the next page.
z ".avi ", ".mpg ", ".mpeg "
• On a CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is highlighted.
Playable Subtitle format
z SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Dvd Subtitle System(*.txt)
VobSub (*.sub) b Sub/idx, stream based format.
• The disc subtitle may not be displayed properly, if a DivX
subtitle is downloaded through the internet.
• If the Disc Subtitle setup menu does not have the DivX
subtitile language you are going to play, the subtitle may
not be displayed properly.
Playable Codec format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable Audio format
z "Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
26
Detailed Descriptions for Video Modes
Additional Features
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
VCD1.1
Last Scene Memory DVD
CD
MODE2: Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Not e:
The video mode setting only works in progressive
scan mode (720p, 576p or 480p).
Not e:
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
Controlling other TVs with the remote control
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote
control.
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
System Select
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP for more than 5
seconds to be able to select a system (PAL, NTSC, or
AUTO).
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (see the table below).
2. Release TV POWER button.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Video Mode Setting
• With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
Manufacturer
LG / GoldStar
Zenith
Code Number
1 (Default), 2
1, 3, 4
6, 7
8, 9
4
• To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
Samsung
Sony
Hitachi
Not es:
• Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
• Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
• If you turn off the power, the video mode will be
back to initial state (MODE1).
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
27
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
FI
FR
DE
GB
GR
GL
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
Heard and McDonald Islands HM
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
HK
HU
IN
ID
IL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
IT
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
JM
JP
KE
KW
LY
LU
PT
RO
El Salvador
Zimbabwe
28
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
No power.
• No disc is inserted.
• Insert a disc. (Check that the DVD or
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
• The TV is not set to receive DVD
signal output.
• Select the appropriate video input
mode on the TV.
No picture.
• The video cable is not connected
securely.
• Connect the video cable securely.
• Unit output setting and TV resolution
capabilities mismatch.
• Check TV capability.
• Check mode of connections
(eg. S-Video, Component etc.).
• Check unit Resolution setting
according to TV capability and mode of
connection.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
No sound.
•
The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected with
the audio cable.
• The AUDIO options are set to the
wrong position.
• Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
• Select the proper audio setting in
AUDIO setup.
• The Digital Audio Output mismatch
with the amplifier.
• Insert a playable disc. (Check the disc
type, colour system, and regional code.)
• An unplayable disc is inserted.
The DVD player does
not start playback.
• Cancel the rating function or change
the rating level.
• The rating level is set.
• Point the Remote Control at the
remote sensor of the DVD player.
• The Remote Control is not pointed at
the remote sensor on the DVD player.
The Remote Control
does not work properly.
• Operate the Remote Control closer to
the DVD player.
• The Remote Control is too far from the
DVD player.
29
Specifications
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
General
Power requirements: AC 110-240 V , 50/60 Hz
Power consumption: 10 W
DIGITAL OUT (OPTICAL):
3 V (p-p), 75 Ω, Optical connector x1
Dimensions (Approx.):
430 x 35 x 242 mm (W x H x D) without foot
System
Weight (Approx.): 1.9 kg
Laser:
Operating temperature:
Semiconductor laser, wavelength 650 nm
5 °C to 35 °C (41 °F to 95 °F)
Signal system: PAL / NTSC
Operating humidity: 5 % to 90 %
Frequency response:
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Outputs
VIDEO OUT:
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 /
SCART (TO TV)
Signal-to-noise ratio:
More than 100 dB (ANALOGUE OUT connectors only)
S-VIDEO OUT:
Harmonic distortion: Less than 0.008%
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
Dynamic range:
More than 95 dB (DVD/CD)
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Accessories:
Remote control (1), Batteries (2)
AUDIO OUT:
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 /
SCART (TO TV)
Not e: Design and specifications are subject to change without prior notice.
30
Technology with the human touch
GUARANTEE
● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee.
1. All faulty components which fail due to defective manufacture will be replaced free of charge for a
period of 12 months from the original date of purchase.
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided
in the repair of this LG equipment, for a period of 12 months from the original date of purchase.
These claims must be made in accordance with the published scale of service charges and
relevant claims procedure.
PLEASE NOTE:
A. The dealer may restrict the guarantee to the original purchaser.
B. The dealer is not obliged to carry out service under guarantee if unauthorized modifications are
made to the apparatus, or if non standard components are used or if the serial number of the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the equipment was
originally purchased. The dealer may, before carrying out service under guarantee, require a
receipted account as evidence of the date of purchase.
D. We respectfully point out that your dealer is not obligated to replace batteries if they become
exhausted or worn in use.
E. Aerial alignment and consumer control adjustments are not covered by this guarantee.
This guarantee does not affect your statutory rights.
● REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT MUST BE
SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
● Product Registration Card :
It is helpful to complete at least your name, address, phone,
model & serial numbers and return it. This will enable LG to
assist you in the future should you lose your receipt, your
units be stolen, or should modifications be necessary.
● To obtain information or assistance: Call 0870 873 5454 Monday-Friday 9.00am-4.30pm
MODEL NO.*
SERIAL NO.*
DATE OF PURCHASE.*
Please complete for your own record
*
In all cases of difficulty - consult your LG dealer
from whom the product was purchased
P/NO : 3834RD0076K
|