LG Electronics Telephone LIP 7004N User Manual

LIP-7004N IP Telephone Description  
Quick Guide  
Fixed Feature button definition  
Button  
Description  
Used to access speed dialing, speed programming, save number redial, and last  
number redial.  
Speed  
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active,  
the red LED in this button is illuminated.  
It is also used to activate call forward, e.g. to another station or voicemail. When  
call forward is activated, the red LED flashes.  
DND  
Speaker toggles the speakerphone state, and the red LED is illuminated when  
the speakerphone is active.  
Speaker  
Hold/Save  
Flexible  
This button is used to put a call on hold or save information when programming.  
Some flexible buttons are pre-programmed in the system for line appearances,  
loop functions etc. The remaining flexible buttons can be user-programmed.  
Used in conjunction with fixed and flexible features, and the function changes in  
relation to call progress, as indicated on the LCD display.  
3 Soft  
Buttons  
This button is used to initiate a call transfer (TRS) or to enter programming mode  
(PGM)  
Trans/PGM  
Call back  
Volume  
A station can initiate a call back request to a busy station. Once that station  
becomes idle, the initiating station is signaled.  
The volume button adjusts the audio levels for ringing, handset and  
speakerphone functions.  
Earphone-Jack Socket  
Used to connect optional headset to the phone.  
Illuminates when the phone is ringing.  
Visual Ringing LED  
Hands-free Microphone  
Microphone is used for hands-free speakerphone function.  
 
User Program Codes  
• Press the [TRANS/PGM] button Press the flexible button to be programmed  
Press [Trans/Pgm] button again Enter the desired feature code below table  
Press the [HOLD/SAVE] button to save.  
iPECS  
Code  
iPECS  
Code  
Function  
Function  
Display Serial number/Package for  
SMEMU  
-
Ring Type  
7 *  
1 0  
1 9  
1 1  
1 2  
2 1  
2 2  
2 3  
-
Enblock mode  
-
USB Always Record  
Account Code  
Ear-Mic Headset  
ICM Ring  
8 4  
3 4  
8 5  
8 8  
8 6  
-
DID Call Wait  
CO Ring  
LOOP Button  
COS Down  
Camp-on  
COS Restore  
INTURSION  
Walking COS  
HUNT DND (group only)  
KEY PAD FACILITY  
ACD STATUS (group only)  
PAGER CALL  
COS Change  
8 9  
-
3 3  
3 4  
3 8  
-
Auth. Code Register  
Auth. Code Change  
Mobile Ext Activation  
Mobile Ext Hunt Call  
Set Wake-up Time  
Wake-Up Erase  
-
9 1  
9 2  
-
CONF Button  
CALLBK Button  
4 1  
4 2  
5 3  
5 4  
1 4  
-
DND / FWD Button  
FLASH Button  
9 4  
9 5  
9 6  
9 7  
-
Conf-Room Activate  
Conf-Room Deactivate  
Call Coverage  
MUTE Button  
MON Button  
REDIAL Button  
Call Coverage For STA XXX  
Set Pre-Selected MSG  
Set Customer MSG  
Two Way Record  
Call Log  
DID RESTRICTION  
DISA RESTRICTION  
USB CALL RECORD  
HOTDESK Agent Login  
HOTDESK Agent Logout  
STA Msg. Wait Retrieve  
CLI/IP Msg. Wait Retrieve  
Msg. Wait in Exec/Sec pair  
Display Phone IP Address  
Change Phone IP Address  
Display Phone MAC IP Address  
Change Mode  
5 1  
5 2  
8 0  
5 7  
-
-
-
* 0  
* *  
3 1  
3 2  
3 5  
7 5  
7 6  
7 7  
7 8  
7 9  
9 3  
9 8  
9 9  
Record User Greeting  
Listen Time & Date  
Listen Station Number  
Listen Station Status  
Record Page MSG  
Erase User Greeting  
Erase Page MSG  
LCD Display Language  
Background Music  
Register Station Name  
Speakerphone / Headset  
Headset Ring Mode  
-
-
-
-
-
-
7 1  
7 3  
7 4  
6 1  
6 2  
Display Phone Version  
DND Button  
FWD Button  
PTT Button  
P/N : MMBB0000000  
 
Important Safety Information  
To prevent the unexpected danger or damage please read this information before installing and  
repairing the phone. There are “Caution” and “Warning”, it means as follows;  
Warning: To reduce the possibility of electric shock, do not expose your phone to high humidity areas,  
such as a bathroom, swimming area, etc.  
Caution: Use only LG-Nortel approved batteries and desktop chargers to avoid the damage to the phone.  
Using other batteries or chargers voids your warranty and may cause an explosion.  
Warning  
Caution  
1. Only trained and qualified service personnel shall  
install, replace or service the phone.  
1. Ensure that children do not pull on phone cords.  
This may injure children or result in equipment  
damage.  
2. Do not spill liquid like water on the phone. If so,  
call for the service center as this may result in  
a fire or an electric shock.  
2. The ear-piece houses a magnetic device which  
may attract pins or small metal objects. Keep  
handset clear of such objects and check before use.  
3. If you see smoke or smell something during,  
unplug the power cord and the phone line. Call for  
service centre immediately.  
3. Avoid placing the phone in an area that is dusty,  
damp or subject to vibration.  
4. If the power adapter is used, do not touch the plug  
with wet hands. This may result in a fire or an  
electric shock.  
4. Choose a site that is dry and well ventilated.  
5. Do not plug multiple plug-packs into one power  
outlet. This may result in overheating of the plug-  
packs and result in a fire or plug-pack failure.  
5. Do not tug the power cord or the phone line. This  
may result in a fire, an electric shock or  
equipment damage.  
6. Do not put the heavy things on the phone.  
7. Do not drop or throw the phone.  
6. Do not use the phone during a thunderstorm.  
Lightning strike may result in a fire, severe  
electrical or acoustic shock.  
8. Static electricity discharge will damage electronic  
components.  
7. Do not use the power adapter if the power cord or  
wall outlet are damaged. This may result in a fire 9. Keep out of direct sunlight and away from heat.  
or an electric shock.  
10.No user serviceable parts inside. No not insert a  
screw driver or any metal objects into the phone.  
This may cause electric shock or damage the  
equipment and will render the warranty void.  
11.Clean the phone with a soft, dry cloth only. Do not  
use volatile liquids such as petrol, alcohol or  
acetone as this may cause a fire or result in  
discoloration or damage to plastics. Do not clean  
with wax or silicon products as these may enter the  
equipment and cause operation to become  
unreliable.  
Disposal of your old appliance  
1. When this crossed-out wheeled bin symbol is attached to a product it means the product  
is covered by the European Directive 2002/96/EC.  
2. All electrical and electronic products should be disposed of separately from the municipal  
waste stream via designated collection facilities appointed by the government or the local  
authorities.  
3. The correct disposal of your old appliance will help prevent potential negative  
consequences for the environment and human health.  
4. For more detailed information about disposal of your old appliance, please contact your  
city office, waste disposal service or the shop where you purchased the product.  
 

Land Pride Brush Cutter 312 753M User Manual
Lenovo Laptop E4430 User Manual
LG Electronics Computer Monitor 29UM65 P User Manual
LG Electronics TV Receiver LSS 3200A User Manual
Lincoln Electric Welding System IM10024 User Manual
Lindy Computer Drive 42907 User Manual
Little Wonder Blower LB1401 00 01 User Manual
Lumens Technology Digital Camera PS751 User Manual
Makita Cordless Saw XRJ03 User Manual
Mamiya Digital Camera PRO 645 User Manual