• ADM loop technology with
Apollo/Discovery protocol
• For use as maximum heat or
rate-of-rise heat detector
• Alarm temperature 55°C
• Optional connection of remote
indicator
• Sealed electronics
Description
The addressable Thermal Detector AW-55000-420 is protocol establishes a permanent communication bet-
based on the heat principle and was developed for the ween the fire detection control panel and the detector.
indoor temperature supervision in a wide range of fire That ensures a periodical function testing of the detec-
detection applications.
tor. Fires are safely detected in the control panel by
continuously analysing the measured values.
The detector is assigned to class A2S and A2R and can
be used up to a room height of 6m. Depending on the The activated condition of the detector is indicated by a
parameter setup in the fire detection control panel, the red LED. The detector address is selected by means of
detector can operate either as maximum heat detector a code card in the detector base. Therefore the detec-
with an alarm temperature of 55°C, or as rate-of-rise tor can be changed without additional tools.
heat detector with a maximum temperature of 55°C.
The detector can be attached to various bases and it
The proven ADM loop technology with Apollo/Discovery can be protected against theft.
Specifications
Operating voltage
Current consumption
Ambient temperature
Relative humidity
Dimensions ø × H
Colour
Supply through loop voltage
max. 250µA (quiescent)
-20°C to +70°C
0 – 95% (no condensation)
100 × 42 (mm)
white
Weight
105g
Approval
VdS G294029
Order number
Order name
242023
Thermal Detector/Anal./XP95/Apo AW-55000-420
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
AW-55000-420_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|