Congratulations on purchasing this state-of-the-art Professional Weather
Center as an example of excellent design and innovative technology.
Featuring time, date, calendar, weather forecast, wind direction and speed,
rainfall, indoor temperature, outdoor temperature and outdoor humidity, air
pressure and various alarm settings for different weather conditions, this
Weather Center will provide you with extensive weather information and
forecast.
PROFESSIONAL WEATHER CENTER
WS-1515U-IT
Instruction Manual
Table of Contents
Topic
Page
3
INSTANT TRANSMISSION is the state-
Features
This product offers:
of-the-art new wireless transmission
technology, exclusively designed and
developed by LA CROSSE
TECHNOLOGY. INSTANT
TRANSMISSION offers you an
immediate update (every 4.5 seconds!)
(6.5 SECONDS FOR RAIN) of all your
outdoor data measured from the
transmitters: follow your climatic
Setting up
6
Function keys
12
14
16
24
25
31
32
36
37
37
39
46
48
49
53
54
57
LCD Screen
Manual Setting
Time alarm setting
Weather alarm operations
Hysteresis
Weather forecast and weather tendency
Wind direction and wind speed measurement
Rainfall measurement
Viewing history data
Viewing the min/ max weather data
Switch On/ Off buzzer
Outdoor transmission 915 MHz reception
Positioning
FEATURES:
Weather Center
Function keys
Hanging hole
Care and Maintenance
Specification
LCD
Warranty Info
Battery
compartment
Function
keys
Stand
•
•
•
•
•
Time display (manual setting)
12/24 hour time display
Calendar display (weekday, date, month, year)
Time alarm function
Weather forecasting function with 3 weather icons and weather
tendency indicator
•
•
•
•
Dew point display in ºF/°C
Outdoor temperature display in ºF/°C
Outdoor Humidity display as RH%
MIN/MAX value of outdoor temperature and humidity display with
time & date of recording
•
•
Indoor temperature display in ºF/°C
Display MIN/MAX value of outdoor temperature, outdoor humidity,
dew point, wind chill and relative pressure with time and date of
recording
72
73
•
•
•
Low/High outdoor temperature and humidity alarm
Relative air pressure displayed in inHg or hPa
Air pressure tendency indicator for the past 12 hours (bar graph
SETTING UP:
format)
•
•
•
•
LCD contrast selectable
Low battery indicator
Wind direction displayed in 16 steps
Wind speed and gust displayed in mph, km/h, or m/s, and Beaufort
scale
Wireless transmission
•
Wind chill displayed in °F of °C
at 915 MHz - thermo-
hygro and rain sensor
to the Weather Center
•
•
High alarm function for wind speed
Manual reset of outdoor temperature, outdoor humidity, dew point,
wind chill, pressure, wind speed, gust, and 24h rainfall
24h rainfall display in inch or mm
Total rainfall display in inch or mm
Storm warning alarm
Buzzer on/off selectable
Storage of 140 sets of history weather data recorded in 3-hour
intervals
Weather Center
•
•
•
•
•
•
•
•
Wireless transmission at 915 MHz
Transmission range up to 330 feet (100 meters)
Back –light? (To be confirmed by LCU)
Rain sensor
Wind sensor
Thermo-hygro Sensor
Cable connection between the wind
sensor and the thermo-hygro sensor
•
Remote transmission of the outdoor temperature
and humidity to the Weather Center at 915 MHz
Weather-resistant casing
Note:
•
•
Wall mounting case (to be mounted in a sheltered
place. Avoid direct rain and sunshine)
When putting the Weather Center into operation, it is important to perform
in close proximity (e.g. on a table) a complete wiring and set-up of the
system. This step is important to test all components for correct function
before placing and mounting them at their final destinations (See
Positioning below) Spin the wind vane and tip the rain gauge to test.
1.
Unwind the cables of the Wind sensor. Connect the Wind sensor to
the Thermo-hygro transmitter by plugging the connector head into the
socket of the Thermo-hygro sensor.
Wind Sensor
•
•
Connected to the thermo-hygro sensor
by cable
Can be installed onto a mast or a
horizontal panel
Sockets for wind sensor
Rain Sensor
•
Remote transmission of the rainfall
data to the Weather Center at 915 MHz
To be mounted onto a horizontal panel
•
2.
3.
First insert the batteries into the Thermo-hygro sensor and Rain
sensor “How to install and replace the batteries into the Thermo-
hygro sensor“ and “How to install and replace the batteries into
the Rain sensor” below).
Then insert the batteries into the Weather Center (see “How to
install and replace the batteries into the Weather Center” below).
Once the batteries are installed, all segments of the LCD will light up
briefly and a short signal tone will be heard. It will then display the
time as 00:00, the date as 1.1.05, the weather icons, and air pressure
value. "- - -" will be shown for outdoor data.
Download from Www.Somanuals.com. All Manuals Search And Downl7o5ad.
74
*In normal display user may press the SET key shortly to toggle between
Mode 1 and Mode 2 display:
LCD SCREEN
The LCD screen is split into 5 sections displaying the following information:
1.
2.
3.
4.
Time and date/ indoor temp/ second
Wind data
Outdoor temperature, Dew point and humidity,
Air pressure, Rainfall data, Air pressure history and Weather forecast
icon.
Mode 1 : Wind speed, outdoor temperature and relative pressure reading
are shown.
Wind speed icon
Time alarm icon
Low battery Indicator (weather center)
Outdoor temp
In Mode 1, this reception
icon is showing the
condition of the
icon
Time display
Calendar display
reception of the signal
Buzzer off indicator
Rel Pressure
from Thermo-hygro
icon
transmitter
Wind direction display
and wind speed in
Beaufort scale
Mode 2 : Wind Gust, Dew Point temperature and Rainfall reading are
shown.
Wind speed Hi
alarm icon
Wind gust icon
Wind Chill in
°F or °C
Outdoor temperature
or dew point
Wind speed or gust
in mph, km/h or m/s
Dew point icon
in °F or ºC
Outdoor relative
humidity in %
Outdoor temp.
alarm icon
In Mode 2, this
Outdoor Humidity
alarm icon
Rainfall icon
reception icon is
showing the condition
of the reception of the
signal from Rain
sensor
Relative air pressure
display in inHg or hPa,
or total and 24h rainfall
display in inch or mm
Transmitter signal
reception icon
Weather tendency
indicator
Air pressure
histogram
MANUAL SETTING:
The following manual settings can be changed once the SET key is
pressed and hold for about 3 seconds:
Weather forecast
icon
•
•
•
•
•
•
•
•
•
•
•
•
LCD contrast setting
Manual time setting
12/24 hour time display
Calendar setting
°F/ °C temperature unit setting
Wind speed unit
Low battery
Indicator (rain sensor)
Low battery Indicator (Thermo-hygro)
* When the signal from the transmitter/ or Rain sensor is successfully
received by the Weather Station, this icon will be switched on. (If not
successful, the icon will not be shown on the LCD). User can therefore
easily see whether the last reception was successful (“ON” icon) or not
(“OFF” icon). On the other hand, the short blinking of the icon shows that a
reception is being done at that time.
Rainfall unit setting
Air pressure unit setting
Relative pressure reference value setting
Weather tendency threshold value
Storm warning threshold value
Alarm On/ Off setting
LCD CONTRAST SETTING
Flashing
The LCD contrast can be set within 8 levels, from "LCD 1" to "LCD 8"
(default setting is LCD 5):
1.
2.
3.
Press the SET key, the contrast level digit will start flashing.
Use the + or MIN/MAX key to adjust the level of contrast.
Confirm with the SET key and enter the MANUAL TIME SETTING.
80
81
MANUAL TIME SETTING:
WIND SPEED UNIT SETTING
MPH
You then may manually set the time of the clock by following the steps
below:
Minutes flashing
Flashing
Hour
flashing
The wind speed unit can be set as mph (mile per hour), km/h (kilometer per
hour), or m/s (meter per second). The default unit is mph.
1.
Use the + or MIN/MAX key to toggle between the unit “mph”, “km/h”
or “m/s”
Confirm with the SET key and enter the RAINFALL UNIT SETTING.
1.
2.
3.
The hour digit will start flashing.
Use the + or MIN/MAX key to set the hour.
Press the SET key to switch to the minutes. The minute digit will start
flashing.
Use the + or MIN/MAX key to set the minute.
Confirm the time with the SET key and enter the 12/24 HOUR TIME
DISPLAY SETTING.
2.
RAINFALL UNIT SETTING
4.
5.
Flashing
The rainfall unit can be set as inch or mm. The default unit is inch.
12/24 HOUR TIME DISPLAY SETTING:
1.
2.
Use the + or MIN/MAX key to toggle between the unit “inch” or “mm”
Confirm the unit with the SET key and enter the RELATIVE AIR
PRESSURE UNIT SETTING
Digit flashing
The time can be set to view as 12-hour or 24-hour format. The default time
display mode is 12-h. To set to 24-h time display:
RELATIVE AIR PRESSURE UNIT SETTING
1.
2.
Use the + or MIN/MAX key to toggle the value.
Confirm with the SET key and enter the CALENDAR SETTING.
Flashing
CALENDAR SETTING:
"Date. Month." (for 24h time display)
"Month. Date." (for 12h time display)
The relative air pressure can be set as inHg or hPa. The default unit is inHg.
1.
2.
Use the + or MIN/MAX key to toggle between the unit “inHg" or “hPa”
Confirm the unit with the SET key and enter the RELATIVE
PRESSURE REFERENCE VALUE SETTING.
Année
RELATIVE PRESSURE REFERENCE VALUE SETTING
The date default of the Weather Center is 1. 1. of year 2005. The date can
be set manually by proceeding as follows.
Note:
The default reference pressure value of the barometer is 29.91inHg when
batteries are first inserted. For an exact measurement, it is necessary to
first adjust the barometer to your local relative air pressure (related to
elevation above sea level). Ask for the current atmospheric pressure of
your home area (Local weather service, www, optician, calibrated
instruments in public buildings, airport).
1.
2.
The year digit starts flashing.
Use the + or MIN/MAX key to set the year. The range runs from "00"
(2000) to "99" (2099).
3.
Press the SET key to confirm the year and enter the month setting.
The month digit will start flashing.
4.
5.
Use the + or MIN/MAX key to set the month.
Press the SET key to confirm the month and enter the date setting
mode. The date digit will start flashing.
The relative air pressure can be manually set to another value within the
range of 27.17 to 31.90 inHg (919 to 1080 hPa) for a better reference.
6.
7.
Use the + or MIN/MAX key to set the date.
Confirm all calendar settings with the SET key and enter the °F/°C
TEMPERATURE UNIT SETTING.
Flashing
°F/°C TEMPERATURE UNIT SETTING
1.The current relative pressure value will start flashing
2.Use the + or MIN/MAX key to increase or decrease the value. Continually
holding the key will allow the value to increase faster.
3.Confirm with the SET key and enter the WEATHER TENDENCY
SENSITIVITY VALUE SETTING.
Flashing
The temperature display can be selected to show temperature data in °F or
°C. (default °F)
Note:
1.
2.
3.
The temperature unit is flashing
This feature is useful for those who live at elevations above sea level, but
want their air pressure display to be based on sea level elevation.
Use the + or MIN/MAX key to toggle between “°F” or “°C”.
Confirm with the SET key and enter the WIND SPEED UNIT
SETTING.
Download from Www.Somanuals.com. All Manuals Search And Downl8o3ad.
82
WEATHER TENDENCY SENSITIVITY LEVEL SETTING
Flashing
Alarm time digit
Alarm-On icon
Flashing
2.
Press and hold the SET key for about 2 seconds. The hour digit of
the alarm time will start flashing. Press the + or MIN/MAX key to set
the hour of the alarm time.
You may select a definite switching sensitivity value, .06, .09, or .12 inHg
for the change in the display of weather icons. This represents the
"sensitivity" of the weather forecast (the smaller the value selected, the
more sensitive the weather forecast). The default value is 0.09 inHg.
3.
4.
Press the SET key to confirm and advance to the minute setting. The
minute digit will be flashing.
Press the + or MIN/MAX key to set the minute of the alarm time.
Press the ALARM key to confirm. Wait for about 30 seconds and the
display will return to normal display mode automatically.
In the normal display mode, press the ALARM once key to go to the
time alarm setting mode again. Then press shortly the SET key to
switch on or off the time alarm. (The showing of the icon (((y))) means
that the time alarm is switched on.)
1.
2.
3.
The sensitivity value will start flashing
Use the + or MIN/MAX key to select the value.
Confirm with the SET key and enter the STORM WARNING
SENSITIVITY SETTING.
5.
STORM WARNING THRESHOLD VALUE SETTING
You may also define a switching sensitivity value for the Storm warning
display at a decrease of air pressure from .09 inHg to .27 inHg over 6 hours
(Default 0.15 inHg).
6.
Press the HISTORY key or wait for about 30 seconds and the display
will return to normal display mode automatically.
Note:
The alarm ringing duration is 2 minutes. To stop the alarm, press any key
during the alarm ringing.
Flashing
Flashing
WEATHER ALARM OPERATIONS
The Weather alarms can be set when certain weather conditions are met
according to your requirements. For example, you can set the thresholds
for the outdoor temperature to +104°F (high) and 14°F (low), while only
enabling the high alarm and disabling the low alarm (i.e. temperatures
<14°F won’t trigger alarm, but temperatures >+104°F will).
1.
2.
3.
The sensitivity value will start flashing.
Use the + or MIN/MAX key to select the value.
Confirm with the SET key and enter the STORM ALARM ON/OFF
SETTING.
STORM ALARM ON/ OFF SETTING
You may also choose to switch On or Off the acoustic Storm warning alarm
(Default OFF).
1.
2.
The digit "AOF" will start flashing.
Use the + key to switch On or Off the alarm. ("AOF" = OFF; "AON" =
On)
High wind speed
Alarm-On icon
3.
Confirm with the SET key and the normal display mode will be shown.
Flashing
Outdoor temp
Alarm-On icon
Note:
Outdoor humidity
Alarm-On icon
In case a storm warning alarm is activated, the downward weather
tendency arrow will be flashing. (Also see WEATHER TENDENCY
INDICATOR below)
TO EXIT THE MANUAL SETTING MODE
To exit the manual setting anytime during the manual setting modes, press
the ALARM key (or HISTORY key) or wait for the automatic timeout. The
mode will return to the normal time display.
The Weather Center can be set to alert when a specific weather condition
is reached.
TIME ALARM SETTING
The following Weather Alarm settings can be adjusted in the ALARM
setting mode.
The alarm time can be set by the use of the ALARM and SET key.
1.
Press the ALARM key once. The “ALARM” icon and time digits are
•
•
•
High outdoor temperature alarm
Low outdoor temperature alarm
High outdoor humidity alarm
shown at the top right of the LCD.
84
85
•
•
Low outdoor humidity alarm
High wind speed alarm
Set the Outdoor temperature alarm value (High or Low alarm value):
1.
In the normal display mode, press the ALARM key 4 times. The High
Outdoor Humidity alarm display will be shown.
Default alarm values:
Low
32°F
104°F
45%
70%
62.0mph
Temperature
High
Low
High
High
Relative
Humidity
Wind speed
2.
3.
Press and hold the SET key for about 2 seconds. The humidity digit
will start flashing. Press the + or MIN/MAX key to set the high outdoor
humidity alarm value.
Press the ALARM key to confirm the setting. The digit will stop
flashing. Press the SET key to switch on or off the alarm. (The
showing of the icon (((y))) means that the alarm is switched on.)
Press the ALARM key once. The Low Outdoor humidity alarm display
will be shown.
Press and hold the SET key for about 2 seconds. The humidity digit
will start flashing. Press the + or MIN/MAX key to set the low outdoor
humidity alarm value.
Press the ALARM key to confirm the setting. The digit will stop
flashing. Press the SET key to switch on or off the alarm. (The
showing of the icon (((y))) means that the alarm is switched on.)
Press the HISTORY key or wait for about 30 seconds and the display
will return to normal display mode automatically.
HIGH AND LOW OUTDOOR TEMPERATURE ALARM
SETTING
Note:
4.
5.
The High and Low outdoor temperature alarm can be set On/Off
independently, according to your needs.
Set the Outdoor temperature alarm value (High or Low alarm value) :
1.
In the normal display mode, press the ALARM key twice. The High
6.
7.
Outdoor Temperature alarm display will be shown.
High alarm icon
Alarm-On icon
In case the humidity value meets the condition for high alarm or low alarm,
the value will be blinking, along with the corresponding icon ("HI AL"/ "LO
AL"). And the buzzer will ring for 2 minutes. User may press any key to stop
the sound.
2.
3.
Press and hold the SET key for about 2 seconds. The temperature
digit will start flashing. Press the + or MIN/MAX key to set the high
outdoor temp alarm value. (Keep holding the key will allow the value
to increase faster.)
Press the ALARM key to confirm the setting. The digit will stop
flashing. Press the SET key to switch on or off the alarm. (The
showing of the icon (((y))) means that the alarm is switched on.)
Press the ALARM key once. The Low Outdoor Temperature alarm
display will be shown.
Press and hold the SET key for about 2 seconds. The temperature
digit will start flashing. Press the + or MIN/MAX key to set the low
outdoor temp alarm value. (Keep holding the key will allow the value
to increase faster.)
WIND SPEED ALARM SETTING
The High wind speed alarm can be set by following the steps below.
1.
In the normal display mode, press the ALARM key six times. The
4.
5.
High wind speed alarm display will be shown.
6.
7.
Press the ALARM key to confirm the setting. The digit will stop
flashing. Press the SET key to switch on or off the alarm. (The
showing of the icon (((y))) means that the alarm is switched on.)
Press the HISTORY key or wait for about 30 seconds and the display
will return to normal display mode automatically.
2.
3.
4.
Press and hold the SET key for about 2 seconds. The wind speed
digit will start flashing. Press the + or MIN/MAX key to set the high
wind speed alarm value.
Press the ALARM key to confirm the setting. The digit will stop
flashing. Press the SET key to switch on or off the alarm. (The
showing of the icon (((y))) means that the alarm is switched on.)
Press the ALARM key once to return to the normal display mode.
In case the temperature value meets the condition for high alarm or low
alarm, the value will be blinking, along with the corresponding icon ("HI AL"/
"LO AL").
And the buzzer will ring for 2 minutes. User then may press any key to stop
the ring.
In case the wind speed exceeds the condition for high wind speed alarm,
the value will be flashing, along with the corresponding high alarm icon ("HI
AL"). And the buzzer will ring for 2 minutes. User may press any key to stop
the sound.
User may quit the alarm setting and return to the normal display mode by
pressing the HISTORY key.
HYSTERESIS
HIGH AND LOW OUTDOOR HUMIDITY ALARM SETTING
To compensate for fluctuation of the measured data, which may cause the
weather alarm to sound constantly if the measured reading is close to your
set level, a hysteresis function has been implemented for each weather
alarm. For example, if the high temperature alarm is set to +77°F and the
current value moves to +77°F, the alarm will be activated (if it has been
enabled). Now when the temperature drops to +76.8°F or below and
Note:
The High and Low outdoor humidity alarm can be set On/Off independently
according to your needs.
Download from Www.Somanuals.com. All Manuals Search And Downl8o7ad.
86
thereafter again increases to beyond +77°F, the data will be blinking, but
no alarm will be activated. It has to drop to below +75.2°F (with a pre-set
hysteresis of 1.8°F) so that the alarm can be produced again. Hysteresis
values for the various weather data types are given in the following table:
about 75% due to the varying areas the Weather Center has been
designed for use. In areas that experience sudden changes in weather (for
example from sunny to rain), the Weather Center will be more accurate
compared to use in areas where the weather is stagnant most of the time
(for example mostly sunny).
If the Weather Center is moved to another location significantly higher or
lower than its initial standing point (for example from the ground floor to the
upper floors of a house), discard the weather forecast for the next 48-60
hours, as the Weather Center may mistake the new location as being a
possible change in air-pressure when really it is due to the slight change of
altitude.
Weather data
Temperature
Humidity
Hysteresis
1.8°F
3% RH
Wind speed
3.1 mph
Note:
The temperature or humidity data will keep on flashing even after a key has
been pressed to stop the alarm or buzzer has been switched off, to indicate
that the current weather condition is out of the pre-set limit(s)
WEATHER TENDENCY INDICATOR
Working together with the weather icons is the weather tendency indicators
(arrow located on the left and right sides of the weather icons). When the
indicator points upwards, it means that the air-pressure is increasing and
the weather is expected to improve, but when indicator points downwards,
the air-pressure is dropping and the weather is expected to become worse.
WEATHER FORECAST AND WEATHER TENDENCY
WEATHER FORECASTING ICONS:
Weather forecasting icons are displayed in any of the following
combinations at the right bottom part of LCD:
Taking this into account, one can see how the weather has changed and is
expected to change. For example, if the indicator is pointing downwards
together with cloud and sun icons, then the last noticeable change in the
weather was when it was sunny (the sun icon only). Therefore, the next
change in the weather will be cloud with rain icons since the indicator is
pointing downwards.
TENDENCY
TENDENCY
TENDENCY
Rainy
Cloudy with sunny
intervals
Sunny
Note:
Once the weather tendency indicator has registered a change in air
pressure, it will remain permanently visualized on the LCD.
For every sudden or significant change in the air pressure, the weather
icons will update accordingly to represent the change in weather.
AIR PRESSURE HISTORY (ELECTRONIC BAROMETER WITH
BAROMETRIC PRESSURE TREND)
(Every time a new average pressure value has been obtained (once per
minute), this value is compared with an internal reference value. If the
difference between these values is bigger than the selected weather
tendency sensitivity, the weather-icon changes, either for worse or for
better. In this case, the current pressure value becomes the new weather
tendency reference.)
The bottom section of the LCD also shows the relative air pressure value
and the air pressure history.
Depending on programming conditions, display of the history of air
pressure in form of a graph consisting of vertical bars.
The bar graph of the electronic barometer shows the air pressure history of
the past 12 hours in five 3-hour steps.
If the icons do not change, either the air pressure has not changed or the
change has been too small for the Weather Center to register. So you may
adjust the "sensitivity" of the pressure change checking in the setting
mode –see WEATHER TENDENCY SENSITIVITY VALUE SETTING
above.
However, if the icon displayed is a sun or raining cloud, there will be no
change of icon if the weather gets any better (with sunny icon) or worse
(with rainy icon) since the icons are already at their extremes.
The icons displayed forecasts the weather in terms of getting better or
worse and not necessarily sunny or rainy as each icon indicates. For
example, if the current weather is cloudy and the rainy icon is displayed, it
does not mean that the product is faulty because it is not raining. It simply
means that the air pressure has dropped and the weather is expected to
get worse but not necessarily rainy.
Air pressure
changes in inHg
Air pressure
changes in hPa
The horizontal axis represents the last 12 hours air pressure recording (-12,
-9, -6, -3 and 0 hour). The bars are plotted at each of the 5 steps and give
the trend over the recorded period. The scale on the right compares the
result. The "0" in the middle of this scale determines the current air
pressure.
Note:
The vertical axis represents the air pressure changes in inHg (+0.12, +0.06,
0, -0.06, -0.12. The “0” represents the current air pressure). The newly
measured pressure was compared to the previously recorded pressure
reading. The pressure change is expressed by the difference between the
current ("0h") and the past readings in division of ±2 hPa or ±0.06 inHg. If
the bars are rising it indicates that the weather is getting better due to an
increase in air pressure. If the bars go down it indicates a drop of the air
After setting up, readings for weather forecasts should be disregarded for
the next 48-60 hours. This will allow sufficient time for the Weather station
to collect air pressure data at a constant altitude and therefore result in a
more accurate forecast.
Common to weather forecasting, absolute accuracy cannot be guaranteed.
The weather forecasting feature is estimated to have an accuracy level of
88
89
pressure and the weather is expected to get worse from the present time
"0".
At every full hour, the current air pressure is used as a basis for the display
of a new graph bar. The existing graph is then moved one column to the
left.
18:00 and 21:00. For instance, if user has manually set the time as 14:52
after installing batteries, the first history record will be made at the coming
15:00 automatically. Then the second record will be on 18:00 and so on.
Each weather record includes the Wind direction, Wind speed/ gust in
Beaufort scale, Wind chill temperature, wind speed/gust, dew point,
Outdoor temp and humidity, relative pressure, 24-hour rainfall and total
rainfall, pressure history and weather tendency. Also, the time and date of
recording will be displayed.
Note:
For accurate barometric pressure trend, the Weather Center should
operate at the same altitude. For example, it should not be moved. Should
the unit be moved, for instance from the ground to the second floor of the
house, the readings for the next 48-60 hours shall be discarded.
Note:
In order to acquire the correct time of recording of the history records, you
shall manually set the current time as soon as installing batteries to the
weather station. Afterwards, you should avoid changing the pre-set time as
it will also alter the recorded "time of recording" of each history record,
which may lead to confusion.
WIND DIRECTION AND WIND SPEED MEASUREMENT
In normal display mode, the second section of the LCD shows the following
wind data.
•
Wind direction (shown on the a compass scale of 16 divisions) and
wind speed/ gust in Beaufort scale
To view the weather history:
1.
In normal display, press the HISTORY key. The latest weather
record will be shown with the date and time of recording. The
"HISTORY" icon will be displayed at the bottom of the LCD.
When viewing History records, user may shift to see the Mode 1 or
Mode 2 data by pressing the SET key.
•
•
•
Wind chill in °F or °C
Wind Speed in km/h, mph or m/s
Gust in km/h, mph or m/s (displayed when in Mode 2, by pressing the
SET key shortly)
2.
Text showing wind speed
in Beaufort scale
(Mode 1: with wind speed + outdoor Temp + Rel. pressure;
Mode 2 : with wind gust + Dew point + rainfall data)
Note: If user wants to choose to view total rainfall or 24-hour rainfall in
history records, he shall first in normal display choose to show the
particular rainfall data, the press History key and SET key to view the
particular rainfall data in History records.
Pointer indicates the
currently detected wind
direction
This alarm symbol
indicates that the alarm
is set On
Wind speed or gust will be show
Wind chill
RAINFALL MEASUREMENT
The total rainfall and 24 hour rainfall measurement is displayed in the fourth
section of the LCD, in the unit of mm or inch.
To View the 24-hour rainfall or the Total rainfall reading:
1.
In normal display, press SET key once and the display will shift to
Mode 2.
2.
Press + key consecutively key to toggle between the 24-hour rainfall,
Total rainfall and Rel. pressure reading.
24 hour
rainfall icon
HISTORY icon
24 hour rainfall
amount
3.
When viewing History records, press MIN/ MAX to view older
records.
(Press MIN/MAX and + key to view "Previous" and "Next" record
respectively. The records are made at 3-hour intervals)
Total rainfall
icon
Note:
•
The stored history records will not be retained after battery change or
whenever battery is removed.
Total rainfall amount
•
The total rainfall value will be exhibited in whole number (no decimal
place) in the history record.
VIEWING THE HISTORY DATA
The weather station can store up to 140 sets of weather data which are
recorded automatically at 3-hour intervals after the weather station is
powered up, at the nearest time of 0:00, 03:00, 06:00, 09:00, 12:00, 15:00,
VIEWING THE MAXIMUM/ MINIMUM WEATHER DATA
The weather station will record the maximum and minimum value of the
various weather data with time and date of recording automatically. The
Download from Www.Somanuals.com. All Manuals Search And Downl9o1ad.
90
following stored maximum and minimum weather data can be viewed by
pressing the MIN/MAX key in normal display mode.
7.
Min Wind chill temperature with the date and time of recording
Time and date
of recording
1.
Min outdoor temperature with the date and time of recording
Time and date of
recording
MIN wind chill
value
MIN outdoor
temperature
value
MIN icon
8.
9.
Max Wind chill temperature with the date and time of recording
Min Relative pressure with the date and time of recording
MIN icon
10. Max Relative pressure with the date and time of recording
2.
3.
Max outdoor temperature with the date and time of recording
Min dew point temperature with the date and time of recording
Time and date
or recording
Time and date
of recording
MIN dew point
value
MAX relative
pressure value
MAX icon
MIN icon
11. Maximum wind speed with the date and time of recording
4.
5.
6.
Max dew point temperature with the date and time of recording
Min outdoor humidity with the date and time of recording
Max outdoor humidity with the date and time of recording
Time and date
of recording
Time and date
of recording
MAX wind
speed value
MAX outdoor
humidity value
MAX icon
12. Maximum Gust with the date and time of recording
MAX icon
92
93
Time and date
of recording
The total rainfall value is
counted from this time and
date
MAX wind gust
value
Total rainfall
icon
Total rainfall amount
MAX icon
13. Max 24 hour rainfall with the date and time of recording
To reset the rainfall reading, press the + key once when the Rainfall value
and "Reset" icon is shown. Then the total rainfall amount will be reset to 0,
and the time updated to current time.
Note:
After power up, the time and date and total rainfall are displayed as "- - -".
After time is adjusted manually, the set time will be shown.
SWITCHING ON/OFF THE BUZZER
User may choose to turn off the buzzer so that when the time alarm is
switched on and activated, the buzzer will not sound but we can still see
the alarm icon (((y))) flashing on the LCD for time alarm.
On the other hand, when the buzzer is turned off and any weather alarm is
activated, the particular weather digits will flash to show user that the
weather condition is being out of the preset threshold value, yet the buzzer
will not sound.
24h rainfall value
To switch off the buzzer:
MAX icon
1.
In normal display mode, press and hold the SET key until the icon
"BUZZER OFF" is shown at the right side above the Wind direction
scale. The LCD will change to setting mode.
RESET THE MAXIMUM AND MINIMUM WEATHER DATA
To reset the aforementioned maximum or minimum weather data 1. to 13.,
you shall need to reset each of the data independently.
2.
Press ALARM key once to return to the normal display mode. The
"BUZZER OFF" icon will still be shown.
1.
Press MIN/MAX key to show the desired weather data. For instance,
if you want to reset the minimum humidity, in the normal display you
shall press the MIN/MAX key three times to show the min humidity
value.
BUZZER OFF icon
2.
3.
4.
Press and hold the SET key for about 2 seconds, then the "RESET"
icon will appear at the bottom part of the LCD.
Press the + key once, then the stored value will be reset to the
current value and current time.
To re-enable the buzzer:
1.
When the BUZZER OFF icon is shown on LCD, press and hold the
SET key until the BUZZER OFF icon disappears.
Press ALARM key once to return to the normal display mode. The
"BUZZER OFF" icon will no longer be shown. Then the alarm will
sound normally.
Press the ALARM key to return to normal display mode.
2.
14. Total rainfall amount
The total rainfall measurement is displayed in the fourth section of the LCD,
in the unit of mm or inch. It shows the total rainfall accumulated since last
reset of the weather station.
LOW BATTERY INDICATOR
In normal display mode, press the MIN/MAX key fourteen times to show the
total rainfall value. The "RESET" icon will also be shown at the same time.
The low battery indicator of the weather station and the transmitter will be
displayed at the top and bottom portion of the LCD respectively when the
Download from Www.Somanuals.com. All Manuals Search And Downl9o5ad.
94
battery power is low. It is recommended to replace the batteries in all units
on an annual basis to ensure optimum accuracy of the system.
La Crosse Technology Sensor Extension Cable
When you require additional length to properly mount your sensor, you can
use La Crosse Technology extension cable. The extension cable is 32 feet
in length and comes with the appropriate connecter attached. Please visit
Note:
•
After battery change, both the Weather Station and the transmitters
need to be reset (see note ”Setting up”)
•
The History data record will be clear after the battery change.
Phone cables and connections have much more resistance than our
extension cable and are not recommended for use. Using phone
cable/connection may damage your sensors.
OUTDOOR TRANSMITTER 915 MHz RECEPTION CHECK
The outdoor temperature, humidity, wind data are transmitted from thermo-
hygro transmitter every 4.5 seconds; the rainfall data are transmitted from
the rain sensor every 6.25 seconds. The receiver will be synchronized to
the thermo-hygro transmitter and rain sensor then. The transmission range
(supposedly up to about 330 feet /100 meters) of the thermo-hygro
transmitter/ rain sensor may be affected by the ambient temperature. At
cold temperatures, the transmitting distance may be decreased. Please
keep this in mind when placing the transmitter and the rain sensor.
Note: Using extension cables will shorten battery life.
Warning: Never cut, splice, shorten or modify your sensor cables or
extension cables. Doing so may damage your sensors and will void your
warranty.
If (1) the outdoor data are not being received within first several minutes
after setting up; (2) the outdoor display always show “- - -“ on the outdoor
display; or (3) the reception icon of thermo-hygro transmitter (Mode 1) and
rain sensor (Mode 2) is not displayed on the display, user shall check the
following points:
The Weather Center
The Weather Center has been designed to be hung onto wall or free
standing.
To wall mount
Choose a sheltered place. Avoid direct rain and
sunshine.
Before wall mounting, please check that the outdoor
values can be received from the desired locations. To
wall mount:
1.
The distance of the Weather Center or transmitter/ rain sensor should
be at least 5 to 6.5 feet (1.5 to 2 meters) away from any interfering
sources such as computer monitors or TV sets.
Avoid positioning the Weather Center onto or in the immediate
proximity of metal doors or window frames.
Using other electrical products such as headphones or speakers
operating on the same signal frequency (915 MHz) may prevent
correct signal transmission and reception.
Neighbors using electrical devices operating on the 915 MHz signal
frequency can also cause interference.
2.
3.
1.
Fix a screw (not supplied) into the desired wall,
leaving the head extended out the by about 5mm.
Hang the station onto the screw. Remember to
ensure that it locks into place before releasing.
2.
4.
5.
“Visibility” of weather center and transmitters (e.g. through a window)
increases the range. (Delete, b/c Windows often reflect the signal)
The Thermo-hygro Sensor
Note:
When the 915 MHz signal is received, do not re-open the battery
compartment cover of either the transmitter/ rain sensor or Weather Center,
as the batteries may spring free from the contacts and force a false reset.
Should this happen accidentally then reset all units (see Setting up above)
otherwise transmission problems may occur.
Rain Cover
During normal operation, after the outdoor display shows "- - -", the
weather center will change to receive the outdoor data every 15 minutes,
until the data is read. Then the reception period for thermo-hygro
transmitter will return to 4.5 seconds (6.25 seconds for rain sensor).
Main nit
If no reception is possible despite the observation of these factors, all
system units have to be reset (see Setting up).
Wall Bracket
An ideal mounting place for the thermo-hygro sensor would be the outer
wall beneath the extension of a roof, as this will protect the sensor from
direct sunlight and other extreme weather conditions.
POSITIONING:
Prior to permanently affixing any of the units, please ensure the following
points are considered:
•
Cable lengths of the units meet with your distance requirements at
the point of fixing
Signals from the sensors can be received by the base station at
points of mounting
To wall mount, use the 2 screws to affix the wall bracket to the desired wall,
plug in the thermo-hygro sensor to the bracket and secure both parts by the
use of the supplied screw and ensure that the cables from the wind and
rain sensors are correctly plugged in otherwise data transmission errors
could occur.
•
96
97
•
•
Extreme temperatures, vibration and shock should be avoided as
these may cause damage to the unit and give inaccurate forecasts
and readings.
Precautions shall be taken when handling the batteries. Injuries,
burns, or property damage may be resulted if the batteries are in
contact with conducting materials, heat, corrosive materials or
explosives. The batteries shall be taken out from the unit before the
product is to be stored for a long period of time.
The Wind Sensor
Wind
vane
Vertical
mast
•
•
Immediately remove all low powered batteries to avoid leakage and
damage. Replace only with new batteries of the recommended type.
When cleaning the display and casings, use a soft damp cloth only.
Do not use solvents or scouring agents as they may mark the LCD
and casings.
Wind fan
•
•
Do not submerge the unit in water.
Special care shall be taken when handling a damaged LCD display.
The liquid crystals can be harmful to user's health.
Horizontal
panel
•
Do not make any repair attempts to the unit. Return them to their
original point of purchase for repair by a qualified engineer. Opening
and tampering with the unit may invalidate their guarantee.
Never touch the exposed electronic circuit of the device as there is a
danger of electric shock should it become exposed.
Do not expose the units to extreme and sudden temperature changes,
this may lead to rapid changes in forecasts and readings and thereby
reduce their accuracy.
Firstly, check that the wind-cups and the wind-vane can rotate freely before
fixing the unit. For correct and accurate readings, it is important to mount
the sensor so that the front (marked E) is pointing in East-West direction.
The wind sensor should now be mounted using the screw or cable tie
provided onto a solid wall/ panel mast or mast to allow the wind to travel
around the sensor unhindered from all directions (ideal mast size should be
from diameter 0.62” to 1.29” (16mm to 33mm). Do not over tighten.
Once the wind sensor is fixed onto the mast, connect the cable to the
corresponding thermo-hygro sensor socket so that operating power supply
can be received and data can be transmitted to the base station. Secure
cord from blowing. Do not us staples. Using PVC pipe or metal as a mast
may cause static. Wood is recommended.
•
•
SPECIFICATIONS:
Temperature measuring range:
Indoor
:
32°F to +140°F with 0.2°F resolution
0ºC to +59.9ºC with 0.1ºC resolution
(“OF.L” displayed if outside this range)
-40°F to +140°F with 0.2°F resolution
-40ºC to +59.9ºC with 0.1ºC resolution
(“OF.L” displayed if outside this range)
Outdoor / dew point :
The Rain Sensor
Relative humidity measuring range:
Outdoor
:
1% to 99% with 1% resolution
(“- -” displayed if < 1%, "99" displayed if ≥ 99%)
0 to 111.8 mph (0 to 50 m/s)
Wind speed/ gust
:
(displayed "OF.L" when > 111.8 mph; 50m/s)
-40°F to +140°F (-40ºC to +59.9ºC)
(displayed "OF.L" if outside this)
Wind chill/ dew point:
Relative pressure pre-set range
Rainfall
:
:
27.17 to 31.90 inHg (919 to 1080 hPa)
0" to 393.6" (0 to 9999 mm)
(displayed "OF.L" when > 9999mm)
Horizontal panel
For best results, the rain sensor should be securely mounted onto a
horizontal surface about 39.37” (1 meter) above the ground (or higher) and
in an open area away from trees or other coverings where rainfall may be
reduced causing inaccurate readings.
Outdoor data reception
:
every 4.5 seconds (from thermo-hygro
transmitter)
every 6.25 seconds (from rain sensor)
When securing into place, check that rain excess will not collect and store
at the base of the unit but can flow out between the base and the mounting
surface (test by pouring clean water).
Air pressure checking interval:every 15 seconds
Transmission range
Power consumption:
Weather Center
:
up to 330 feet (100 meters) in open space
:
3 x AA, IEC LR6, 1.5V
2 x AA, IEC LR6, 1.5V
After mounting the rain sensor and placing battery, the rain sensor is now
operable. For testing purposes, very slowly pour a small amount of clean
water into the rain sensor funnel. The water will act as rainfall and will be
received and displayed at the base station after about 2 minutes delay i.e.
when the reading interval is reached.
Thermo-hygro transmitter :
Rain sensor
Battery life
:
2 x AAA, IEC LR3, 1.5V
approximately 24 months (Alkaline batteries
recommended)
:
Dimensions (L x W x H):
Weather Center
Thermo-hygro transmitter : 2.25” x 2.44” x 6.18” (57.3 x 62 x 157mm)
Wind sensor 9.84” x 5.74” x1087” (250 x 145.9 x 276.2mm)
:
6.15” x 1.25” x 5.58” (165.4 x 31.8 x 141.9mm)
CARE AND MAINTENANCE:
:
Download from Www.Somanuals.com. All Manuals Search And Downl9o9ad.
98
Your La Crosse Technology, Ltd warranty covers all defects in material and
workmanship with the following specified exceptions: (1) damage caused
by accident, unreasonable use or neglect (including the lack of reasonable
and necessary maintenance); (2) damage occurring during shipment
(claims must be presented to the carrier); (3) damage to, or deterioration of,
any accessory or decorative surface; (4) damage resulting from failure to
follow instructions contained in your owner’s manual; (5) damage resulting
from the performance of repairs or alterations by someone other than an
authorized La Crosse Technology, Ltd authorized service center; (6) units
used for other than home use (7) applications and uses that this product
was not intended or (8) the products inability to receive a signal due to any
source of interference.. This warranty covers only actual defects within the
product itself, and does not cover the cost of installation or removal from a
fixed installation, normal set-up or adjustments, claims based on
misrepresentation by the seller or performance variations resulting from
installation-related circumstances.
Rain sensor
:
5.67” x 2.15” x3.46” (144 x 54.6 x 88mm)
LIABILITY DISCLAIMER
•
The electrical and electronic wastes contain hazardous substances.
Disposal of electronic waste in wild country and/or in unauthorized
grounds strongly damages the environment.
•
•
Please contact your local or/and regional authorities to retrieve the
addresses of legal dumping grounds with selective collection.
All electronic instruments must from now on be recycled. User shall
take an active part in the reuse, recycling and recovery of the
electrical and electronic waste.
•
•
The unrestricted disposal of electronic waste may do harm on public
health and the quality of environment.
As stated on the gift box and labeled on the product, reading the
“User manual” is highly recommended for the benefit of the user. This
product must however not be thrown in general rubbish collection
points.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR
DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION
OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR
MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS
PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
•
The manufacturer and supplier cannot accept any responsibility for
any incorrect readings and any consequences that occur should an
inaccurate reading take place.
•
•
This product is designed for use in the home only as indication of the
temperature.
This product is not to be used for medical purposes or for public
information.
This warranty gives you specific legal rights. You may also have other
rights specific to your State. Some States do no allow the exclusion of
consequential or incidental damages therefore the above exclusion of
limitation may not apply to you.
•
•
•
The specifications of this product may change without prior notice.
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written
authorization of the manufacturer.
For warranty work, technical support, or information contact:
La Crosse Technology, Ltd
2809 Losey Blvd. S.
La Crosse, WI 54601
Phone: 608.782.1610
Fax: 608.796.1020
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this
product against manufacturing defects in materials and workmanship.
e-mail:
(warranty work)
This limited warranty begins on the original date of purchase, is valid only
on products purchased and used in North America and only to the original
purchaser of this product. To receive warranty service, the purchaser must
contact La Crosse Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La Crosse
Technology, Ltd authorized service center. The original dated bill of sale
must be presented upon request as proof of purchase to La Crosse
Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
(information on other products)
web:
For more information, please visit:
La Crosse Technology, Ltd will repair or replace this product, at our option
and at no charge as stipulated herein, with new or reconditioned parts or
products if found to be defective during the limited warranty period
specified above. All replaced parts and products become the property of
La Crosse Technology, Ltd and must be returned to La Crosse Technology,
Ltd. Replacement parts and products assume the remaining original
warranty, or ninety (90) days, whichever is longer. La Crosse Technology,
Ltd will pay all expenses for labor and materials for all repairs covered by
this warranty. If necessary repairs are not covered by this warranty, or if a
product is examined which is not in need or repair, you will be charged for
the repairs or examination. The owner must pay any shipping charges
incurred in getting your La Crosse Technology, Ltd product to a La Crosse
Technology, Ltd authorized service center. La Crosse Technology, Ltd will
pay ground return shipping charges to the owner of the product to a USA
address only.
All rights reserved. This handbook must not be reproduced in any form,
even in excerpts, or duplicated or processed using electronic, mechanical
or chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information
in this handbook is regularly checked and corrections made in the next
issue. We accept no liability for technical mistakes or printing errors, or
their consequences.
All trademarks and patents are acknowledged.
100
101
|