Part Number
Component
Specifications
3880-DIN
47609-EMP
Telephone Patching Expansion Board
See ELECTRONIC FILES for CAD files (.DXF, .DWG, MS-DOS.EPS) on disk
APPLICATION
Leviton’s Telephone Patching Expansion Board features a 110-Type
IDC connector that brings telephone service in from the demarcation
point, distributing the line to seven RJ-45 ports. Route telephone
service to remote locations, or link the Patching Expansion Board to
additional modules, such as Leviton's Category 5e Voice & Data
Board or Telephone Line Distribution Board. Suitable for phone, fax
or modem.
STANDARDS COMPLIANCE
Meets all applicable standards: cULus Listed; FCC Part compliant.
PHYSICAL SPECIFICATIONS
Materials:
Printed circuit board with one 110-Type IDC
connector bridged to seven 8P8C connectors or
RJ45-style connectors.
Dimensions:
5.75”H x 1.75”W x .63”D
For ELECTRONIC Typical Specs see (.TXT) file on disk.
DESIGN CONSIDERATIONS
•
Use with Category 5e Voice and Data Board and/or Telephone
Line Distribution Board.
Fits easily into any Leviton Structured Media™ enclosure.
TYPICAL SPECIFICATION
•
The Telephone Patching Expansion Board shall meet all
applicable standards: cULus Listed; FCC Part compliant. The
board shall feature a 110-Type IDC connector that brings
telephone service in from the demarcation point, and distributes
the line to seven RJ-45 ports. The board shall route telephone
service to remote locations, or link to a Category 5e Voice & Data
Board or Telephone Line Distribution Board. It shall fit into
Leviton’s Structured Media enclosure. The manufacturer shall
provide a one-year limited product warranty.
UNIQUE FEATURES
•
4-line bridged module with patching via modular plug, not 110
IDC punchdown.
WARRANTY INFORMATION
•
One-year limited product warranty.
For Applications Engineering Support – Call 1-425-485-4288; in USA call 1-800-824-3005
2222 – 222nd St. SE • Bothell, WA 98021 USA • Tel: 1-800-722-2082 / 1-425-485-4288 • Fax: 1-425-483-5270 • Int'l Fax: 1-425-485-9170 • GSA# GS-35F-4785G
|