Lytecaster® Recessed Downlighting 1000P1
Page 1 of 1
5" Aperture Incandescent Standard Frame-In Kit
14”
Ceiling Opening
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Enclosed
Diffusers
Wall
Washer
1000P1
Satin
Cone
Baffles
Basic
White
Pinhole
Adjustable
Eyeball
Reflector Cone
1045
1012
1008
1005
1071
1011
1029
1082
1021
1035
1046
1046CD
1012NM
1013
1008NM
1010
1010NM
1005NM
1005BNM
1005WH
1076
1029NM
1029BK
1029BKNM
1029CD
1029CDNM
1029CL
1029CLNM
1029GD
1023
1023WH
1024
1078
1035WH
1085
1013NM
1013CD
1013BKNM
1013CDNM
1013BK
1013WH
1076WH
1029GDNM
1029BNM
PAR30 lamps do not require socket extender. Long neck PAR30 lamps are not compatible with the 1029 series trims.
Features
Labels
1. Housing: .026" galvanized steel. Access door for inspection of junction box.
2. Mounting Frame: .036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to 1" thick. Four slots are positioned 90° apart to simplify
alignment. Push-in/twist-out rotoclips hold reflector flush to ceiling.
3. Junction Box: 4" X 3 1/2" X 2" (22 cu. in.) .063" (#14 ga.) galvanized
steel. U.L. listed for maximum of 8 No. 12 ga. 75° C through branch circuit
conductors (60° C end of run). Integral cable clamps permit attachment
of non-metallic Romex® or armored cable without need of additional
connectors.
UL (Suitable for Damp Locations), I.B.E.W.
®
Romex is a registered Trademark of General Cable Industries Inc.
US Patent No's.: 5,045,985
Job Information
Type:
4. Mounting Bars: .059" (#16 ga.) galvanized steel. 13" long bars extend to
27", rotatable and lockable, with integral T-bar tabs. Attach to wood joist or
T-bar ceilings without the need of accessories.
5. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 leads to junction box.
Job Name:
Cat. No.:
6. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat. Located inside housing.
Lamp(s):
Notes:
Options & Accessories
Mounting Bars:
1964 - 20" set of (2)
Plaster Ceiling Ring:
Extra-Thick Ceiling
Mounting Ring:
1960 - 7 /8" depth for wet plaster ceilings.
Lightolier a Genlyte company
1967B - up to 2" thick ceilings.
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • H0906
|