Lytecaster® Recessed Downlighting 1100DICM
Page ꢀ of ꢀ
6 3/4” Aperture Deep Insulated Ceiling Incandescent Frame-In Kit
Reflector Trim
Frame-in Kit
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Adjustable
Enclosed Wall
Reflector
Satin Sloped
Cone Ceiling
Baffles
Basic
White
Cross
Blade
Recessed Recessed
Diffuers
Washer
Line Volt.
Low Volt.
1100DICM
1143
1108† 1131
1105†
1170M1
1171
1132
1132A
1127
1152
1121
1135
1135WH
1185
1186
1186WH
1144
1110† 1131WH 1105WH
1127BK
1127WH
1129†
1155
1124
1144CD
1145
1146
1146CD
1131GD
1131CL
1131BK
1133
1133WH 1105BNM
1133GD
1176
1155WH
1161
1161WH
1163
1164
1126
1176WH
1179M1
1179WH
1128
1129CD†
1129WH
1129CL†
1129BK†
1129GD†
1138
1134
1177SH
1178SH
1190
Cone:
1112†
1113†
1113BK†
1113CD†
1113WH
1133CL
1133BK
1148
Eyeball:
1122
1122WH
1123
1123WH
1182
† Add NM to catalog
number for Natural
Metal Flange finish
Features
Options & Accessories
1. Housing: Walls .032” aluminum. Cover .026” galvanized steel. UL listed
for direct contact with thermal insulation reduces heat loss. Access door
for inspection of junction box.
Extra-Thick Ceiling Mounting Ring:
277V Remote Step-Down Transformer:
1967A - up to 2” thick ceiling.
7997 - 277v down to ꢀ20v
300W max. load.
2. Mounting Frame: .036” (#20 ga.) galvanized steel. Accommodates all
ceilings up to ꢀ” thick. 3/8” deep integral lip. Four slots are positioned 90°
apart to simplify alignment. Push-in/twist-out rotoclips hold reflector flush
to ceiling.
3. Junction Box: 2” X 4” X 4”: .063” (#ꢀ4 ga.) galvanized steel. UL listed for
maximum of 6 No. ꢀ2 ga., 90° C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside
of housing allows easy inspection of wiring without removal of housing.
Integral cable clamps permit attachment of nonmetallic, Romex® without
the need for additional connectors.
Labels
UL (Suitable for Damp Locations).
Romex® is a registered trademark of General Cables Industries Inc.
US Patent Nos. 4,313,154; 5,045,985; 4,751,624
Job Information
Type:
Job Name:
Cat. No.:
4. Mounting Bars: .059” (#ꢀ6 ga.) galvanized steel. Bars pivot for easy
attachment and wire-in below ceiling line. Bars extend to accommodate
ꢀ6” to 24” O. C. joist spacing and feature integral nail for secure attachment
to wood construction. Attaches to T-bar ceilings without the need of
accessories.
Lamp(s):
Notes:
5. Socket Housing: Galvanized steel.
6. Socket: Porcelain medium base; nickel plated screw shell.
Pre-wired with #ꢀ8 ga. SFꢀ leads to junction box.
7. Thermal Protector: Meets NEC and UL requirements. Located inside
housing.
Lightolier a Genlyte company
63ꢀ Airport Road, Fall River, MA 02720 • (508) 679-8ꢀ3ꢀ • Fax (508) 674-47ꢀ0
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • F0906
|