Lindy Computer Drive SD CBALINEC 4E6I User Manual

User Manual  
Firewire IEEE 1394A + USB 2.0 Combo Card  
SD-CBALINEC-4E6I  
All other company and product names are trademarks or registered trademarks of their respective owners.  
 
Pin Assignment for Internal USB connectors (If available)  
Installing the ALi Firewire IEEE 1394A + USB 2.0 Combo card  
Installing this ALi Firewire IEEE1394A + USB 2.0 Combo card to your computer is simple, just simply  
follow these steps.  
Turn off your computer and all external devices connect to it.  
Disconnect your computer from the power sources.  
Open the computer case. Refer to your computer user manual for more details.  
Find an available PCI slot and remove the slot bracket. Save the bracket screw for later use.  
Align the combo card horizontally with respect to the PCI slot and insert it into the slot firmly and  
evenly. Take care not to force it into the slot. Once you have properly positioned the combo card  
into the slot, fasten it to the computer case with the bracket screw you have saved.  
Secure the computer case and switch on your computer.  
Driver Installation  
You need to install three types of driver before the combo card function properly.  
1. 1394 Bus Controller driver  
2. ALi PCI to USB Open Host Controller driver  
3. ALi PCI to USB Enhanced Host Controller driver  
For Windows 98/98SE/ME/2000 & XP Operating System  
Note: Make sure you have your Microsoft Windows O/S Installation CD ready before installing this  
Firewire IEEE 1394A + USB 2.0 Combo card.  
1. Installing 1394 Bus Controller driver  
This combo card is compliant to IEEE 1394 OpenHCI Specifications and compatible with Microsoft  
OHCI, DV, and SBP-2 driver in Windows 98, Windows 98SE, Windows Me, Windows 2000, and  
Windows XP operating system. Full driver support by Microsoft OpenHCI based drivers, no additional  
driver required. Simply have your Windows O/S Installation CD ready when Windows Installation  
Wizard prompts for the location of the driver.  
2. Installing ALi PCI to USB Open Host Controller driver  
Windows should detect three “ALi PCI to USB Open Host Controller”, no additional driver required.  
Full driver support by Microsoft OpenHCI based drivers. Simply have your Windows O/S Installation  
CD ready when Windows Installation Wizard prompts for the location of the driver.  
2
 
3. Installing ALi PCI to USB Enhanced Host Controller driver  
Installing Windows XP driver  
For Windows XP, you can use Microsoft EHCI driver for Windows XP or install the ALI EHCI driver  
we provided with this card.  
If you have decided to use the Microsoft EHCI driver, you need to download Windows XP Service  
Pack 1 for the Microsoft EHCI drivers. Please refer to “To download Windows XP Service Pack 1”  
on how to download the driver. If you have already installed Windows XP Service Pack 1 in your  
system, Windows XP will automatically install all the drivers for you.  
If you have decided to install the ALI EHCI driver we provided with the combo card, please refer to  
Installing Windows XP/2000/ME/98SE/98 driver”.  
To download Windows XP Service Pack 1  
1. Make sure you are connected to the internet.  
2. Click Start and select Windows Update.  
3. Windows XP will launch Microsoft Internet Explorer and open the link to Microsoft Windows  
Update. Click Scan for updates.  
4. Microsoft Windows Update will list all available updates on the web. At Critical Updates and  
Service Packs, select Windows XP Service Pack 1 for download.  
5. Once Windows XP Service Pack 1 is downloaded and installed into your system, you need to  
restart Windows XP before the Microsoft EHCI drivers are installed into your system.  
Installing Windows XP/2000/ME/98SE/98 driver  
Make sure the combo card has been installed correctly on your system.  
1. If your card is installed correctly, Windows will automatically detects these items:  
a) Three ALi PCI to USB Open Host Controller” devices – Full driver support by Microsoft  
OpenHCI based drivers, no additional driver required. Simply follow the Windows instructions  
to install the Microsoft ALI Open Host Controller driver.  
b) Windows should also detect a “PCI Universal Serial Bus” device and prompt you for the  
driver. Please the “Cancel” button to end installation.  
2. Insert the supplied Driver Installation CD into the CDROM drive.  
3. Execute the setup program by double clicking on the SETUP.EXE file in D:\ALI\M527X folder of  
the Driver Installation CD (Assuming your CDROM drive is Drive D).  
4. Follow the setup program instructions to finish installing the ALi EHCI drivers. Once the drivers  
are installed, you need to restart your Windows.  
After you have installed the driver, go to the Device Manager to check if these items are added:  
1. Under 1394 Bus Controller” in Device Manager, this item is added.  
PCI OHCI Compliant IEEE1394 Host Controller  
2. Under Universal Serial Bus Controller” in Device Manager, these items are added.  
Standard Enhanced PCI to USB Host Controller (If MS Windows XP EHCI driver is installed)  
ALi PCI to USB Enhanced Host Controller (If ALI EHCI driver is installed)  
ALi PCI to USB Open Host Controller  
ALi PCI to USB Open Host Controller  
ALi PCI to USB Open Host Controller  
USB 2.0 Root Hub  
USB Root Hub  
USB Root Hub  
USB Root Hub  
If there is no yellow exclamation mark next to any of the above items then you have successfully  
installed the drivers for the ALi Firewire IEEE 1394A + USB 2.0 Combo card.  
3
 

KTI Networks Switch KS 2260 User Manual
Learning Resources Baby Toy LER 2434 User Manual
Lenovo Server 387 User Manual
Lexmark All in One Printer 90P3000 User Manual
Life Fitness Home Gym AK53 00053 0000 User Manual
Link electronic Switch AVS 816 VHD User Manual
LST Smoke Alarm 2251CTLE User Manual
Makita Cordless Drill 60921 User Manual
Melissa Mixer 646 061 User Manual
Metra Electronics Music Mixer 99 5806 User Manual