Lindy Webcam 32444 User Manual

English Manual  
English Manual  
Introduction  
2. By using the DOS command line under Windows  
Please check the package contents before proceeding, you should  
find the following items included.  
Start a DOS Window and type the following commands:  
Syntax:  
arp –s <IP address> <MAC address>  
ping <IP address>  
1. The LINDY NetCam  
2. Power supply unit  
3. Mounting bracket  
Example:  
4. I/O Terminal block connector  
5. This user manual  
LINDY NetCam  
6. CD-ROM containing driver, software and user manual  
User Manual  
English  
Benutzerhandbuch  
Deutsch  
Description and Installation  
The following elements can be found on the front of the camera: The  
lens, the microphone and the status LED. On the back panel you can  
find: the power connector, the I/O terminal block, the Ethernet jack  
and the label containing the serial number. To connect the camera  
via a hub to an existing network, please use a standard 1:1 patch  
cable, to connect it directly to a PC, please use a crossover patch  
cable. If you wish to connect any external components (e.g. sensors/  
alarms) then please refer to user manual on the CD-ROM. You can  
now proceed to the installation and applying power to the LINDY  
NetCam.  
Setting the IP Address for the Camera  
Please record the serial number from the label on the unit. This serial  
number is the MAC address for the camera, for example  
0002D11000520 = 00-02-D1-10-00-52. There are two ways to assign  
an IP address to this MAC address.  
Type the arp command and press ‘enter’  
Type the ping command and press ‘enter’  
1. By using the ‘Installer.exe’ software on the CD-ROM  
If you see the reply message, the unit has been installed  
successfully  
Run the ‘Installer.exe’ first, then power on the unit.  
Viewing the Camera via a Web browser  
Click on the serial  
number that  
corresponds to your  
Type the IP address that you’ve assigned. The required password is the  
serial number (mind upper and lower cases), the login name is ‘root’  
camera  
Assign a free IP address  
If you want to fix the  
IP address of the unit,  
check the option ‘Use  
this IP whenever the  
system boots’  
LINDY No. 32444  
Click ‘Set IP Address’ to start the installation process  
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH  
-
FIRST EDITION (Feb-2003)  
Click on the ’Configuration’ button for further adjustments  
 

La Crosse Technology Clock WS8157U User Manual
LG Electronics Cell Phone VI 5225 User Manual
LG Electronics Clothes Dryer DLEX8000 User Manual
Linksys Switch SRW2024P User Manual
Lochinvar Water Heater JR SUB 07 User Manual
Mackie Musical Instrument Pro Audio Lab User Manual
Magic Chef Toaster MCSTO6B User Manual
Magnavox Portable CD Player AZ 9430 User Manual
Maytag Dishwasher DWC8330 User Manual
Maytag Washer BRAVOSTM User Manual