Linear Home Security System DF 31 EC User Manual

1. SENSOR & MAGNET DETAIL  
2. SET SENSOR SWITCH  
3. EXAMPLE SENSOR LOCATIONS  
SENSOR HAS BUILT-IN SWITCH ON SIDE WITH NOTCH.  
MAGNET CAN ACTIVATE SWITCH UP TO 1/2" AWAY.  
WHEN MOUNTING SENSOR, ALIGN MAGNET TO NOTCH.  
SENSOR  
ON FRAME  
DF-31/EC  
MAGNET  
ON DOOR  
REMOVE PLASTIC BATTERY TAB  
PRIOR TO INSTALLATION BY  
PULLING STRAIGHT OUT  
DOOR/WINDOW  
SENSOR  
For Use with DF-16/EC  
Security Console  
SENSOR  
NOTCH ON  
SIDE OF  
SENSOR  
Installation  
Instructions  
SET SWITCH TO DELAYED  
FOR ENTRY/EXIT DOOR  
ALIGN MAGNET  
NEXT TO NOTCH  
ON SENSOR  
SET SWITCH TO INSTANT  
FOR WINDOWS OR  
NON-ENTRY DOORS  
MAGNET  
ON WINDOW  
MAGNET  
1/2" SPACE  
MAXIMUM  
(760) 438-7000 • FAX (760) 438-7043  
SENSOR  
ON FRAME  
4. PROGRAM SENSOR INTO CONSOLE  
5. EXAMPLE SENSOR MOUNTING ON DOOR  
6. EXAMPLE SENSOR MOUNTING ON WINDOW  
7. OPTIONAL MAGNET SPACER  
START IN  
OFF MODE  
SEND SIGNAL  
FROM SENSOR  
USE SPACER WHEN  
SURFACES ARE  
UNEVEN  
ENTER YOUR  
SECRET CODE  
PRESS  
LEARN UNUSED SENSOR  
NUMBER  
ENTER AN  
MOUNT SENSOR  
PLATE TO FRAME  
ALIGN MAGNET  
PLATE NEXT TO  
SENSOR PLATE  
AND ATTACH TO  
WINDOW  
LEARN BUTTON  
SPACE BELOW  
PLATE IS REQUIRED  
TO SNAP SENSOR  
ONTO PLATE  
MOUNT SENSOR  
PLATE TO FRAME  
HOOK SPACER TO  
MAGNET PLATE  
AND ROTATE TO  
LOCK IN PLACE  
1/2" MAXIMUM  
SPACE BETWEEN  
SENSOR AND  
1/2" MINIMUM  
1
ALIGN MAGNET  
PLATE NEXT TO  
SENSOR PLATE  
AND ATTACH TO  
DOOR  
MAGNET PLATES  
R&TTE VAEE 28357, EMC, SFT, ETS  
SNAP SENSOR ONTO  
MOUNTING PLATE  
PRESS SENSOR  
OR MOVE MAGNET  
TO SEND SIGNAL  
HOLD OFF BUTTON  
SNAP SENSOR ONTO  
MOUNTING PLATE  
Linear Corporation declares that the apparatus DF-31/EC  
complies with the essential requirements and other relevant  
provisions of Directive 1995/5/EC.  
FOR 3 SECONDS WHEN  
FINISHED TO EXIT  
LEARN MODE  
8. TEST SENSOR  
9. LABEL SENSORS  
STATUS INDICATOR  
SHOULD LIGHT  
10. CHANGING BATTERIES  
INTERNATIONAL WARRANTY  
This Linear product is warranted against defects in material and workmanship for twelve (12) months. The  
Warranty Expiration Date is labeled on the product. This warranty extends only to wholesale customers who  
buy direct from Linear or through Linear’s normal distribution channels. Linear does not warrant this product  
to consumers. Consumers should inquire from their selling dealer as to the nature of the dealer’s warranty, if  
any. There are no obligations or liabilities on the part of Linear Corporation for consequential damages  
arising out of or in connection with use or performance of this product or other indirect damages with  
respect to loss of property, revenue, or profit, or cost of removal, installation, or reinstallation. All implied  
warranties, including implied warranties for merchantability and implied warranties for fitness, are valid only until  
Warranty Expiration Date as labeled on the product. This Linear Corporation Warranty is in lieu of all other  
warranties express or implied.  
WHEN CONSOLE INDICATES A SENSOR  
SENSOR LIGHT  
SHOULD  
GLOW FOR  
WHEN SENSOR IS OPEN  
LOW BATTERY, OPEN SENSOR CASE AND  
GENTLY LIFT UP END OF BATTERY CLAMP,  
SLIDE BATTERIES OUT  
OPEN DOOR  
OR WINDOW  
TWO SECONDS  
For warranty service on Linear equipment return product, at sender’s expense to: Linear Hong Kong  
19/F Hounor Industrial Centre,6 Sun Yip Street Chai Wan, Hong Kong Attention: Repairs Department  
REPAIRS POLICY  
NOTE: USE OF EXCESSIVE FORCE ON  
BATTERY CLAMP WILL RESULT IN DAMAGE  
1
Charges will be made for equipment that is not of warranty, shows customer abuse, or is damaged by the effects  
of lightning, water, fire, or other abnormal happenings.  
Customer’s equipment sent in for repair may be repaired or replaced with new or remanufactured equipment  
at Linear’s discretion.  
The customer is always responsible for shipping and handling charges to the repairs facility. Linear will pay return  
shipping and handling charges on “in warranty” products shipped back to the customer. The customer will be  
billed for the return shipping and handling charges on “out of warranty” products.  
+
-
+
USE LABELS PROVIDED  
TO IDENTIFY SENSORS  
LIFT  
-
There will be a 50% expedite fee for any express requests.  
The International Sales Manager must be notified prior to the return of product to Linear. All international returns  
must have an International Repair Authorization number (IRA#). The number must be marked on all packages.  
Failure to do so will cause delays in processing.  
INSTALL TWO  
DURACELL  
TYPE DL 2032  
BATTERIES (+)  
SIDE UP  
IMPORTANT !!!  
Linear radio controls provide  
a
signaling. However, there are some limitations which must be observed.  
reliable communications link and fill an important need in portable wireless  
The radios are required to comply with local rules and regulations as radio devices. As such, they have limited  
transmitter power and therefore limited range.  
CONSOLE IN  
CHIME MODE  
SHOULD DING-DONG  
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that  
occur on or near their operating frequencies, regardless of code settings.  
Changes or modifications to the device may void regulatory compliance.  
Infrequently used radio links should be tested regularly to protect against undetected interference or fault.  
A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or  
dealer, and these facts should be communicated to the ultimate users.  
REMOVE BATTERIES  
FROM THIS END  
IF NECESSARY  
PUSH IN SLOT TO REMOVE  
SENSOR FROM MOUNTING PLATE  
Copyright © 2003 Linear Corporation  
220837 A  
 

Kyocera All in One Printer FS 920 User Manual
LaCie Blu ray Player d2 Blu ray User Manual
Lennox International Inc Gas Heater cariable capacity gas furnace User Manual
LG Electronics Air Conditioner L6004 1 User Manual
LG Electronics Cell Phone VM701 User Manual
LG Electronics Refrigerator LRSC21951ST User Manual
Life Fitness Stepper Machine 95SW User Manual
Logitech Headphones UE 6000 User Manual
Makita Power Hammer HM1203C User Manual
Maytag Cooktop W10268392A User Manual