K00106 ADAPTER KIT
Installation Instructions
1. The K00106 adapter kit is used for installing a B-0320 or B-0420 ice machine on a Manitowoc 30” wide series
dispenser.
2. Installation (dispenser to be level before starting):
A. Place adapters on dispenser, as shown.
B. Drill four 5/32” dia. holes in the dispenser, as shown (adapters must be compressed on foam and level with
dispenser).
C. Fasten each adapter with the two screws provided in kit.
D. Apply foam tape to the edge of adapters and on top of existing rear foam tape.
3. Ice machine installation:
A. Position ice machine on dispenser.
B. Proceed to ice machine installation manual for electrical and water hook-up and start-up procedure.
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
8008923
Rev. 09/03/97
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879
|