E X E C U T I V E
D R A U G H T S M A N B E E R D I S P E N S E R
M o d e l :
BDM001
AC: 65W /
DC: 52W
PLEASE READ ALL INSTRUCTIONS BEFORE USE
2 y e a r g u a r a n t e e
MW_BDM001_Beer Dispenser_IM.indd 1
2008/07/22 08:46:50 AM
Fig.1
Fig.2
Fig.3
MW_BDM001_Beer Dispenser_IM.indd 3
2008/07/22 08:46:50 AM
Description:
sources, oil, sharp edges or moving parts.
- Check the state of the electrical connection
cable. Damaged or tangled cables increase the
risk of electric shock.
A Body
B Lid
C Dispenser lever and handle
D Rubber connectors and clips
E Removable drip-tray with grill
F 12V DC cable (connects to cigarette lighter
slot)
- Do not touch the plug with wet hands.
Use and care:
- Fully extend the appliance’s power cable before
each use.
G 230V AC cable with plug (for home use)
H 12V DC connection
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the on/ off switch
does not work.
- Do not move the appliance while in use.
- Do not turn the appliance over while it is in use
or connected to the mains.
I
230V AC connection
J Temperature selector control
K Power voltage and selector control and stop
- Unplug the appliance from the mains when not
in use and before undertaking any cleaning task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.
- This appliance is intended for adult use only.
Ensure that this product is not used by the
disabled, children or anyone under the age of 18
years of age.
Safety tips and precautions
- Read these instructions carefully before
switching on the appliance and keep them for
future reference. Failure to follow and observe
these instructions could lead to an accident.
- Clean all the parts of the product that will be in
contact with food, as indicated in the cleaning
section, before use.
Use or working environment:
- Do not place the appliance on hot surfaces like
cooking plates, gas burners, ovens or similar.
- Place the appliance on a horizontal, flat and
stable surface.
- This appliance should be stored out of reach of
children and/or the disabled.
- Do not put the appliance away in a horizontal
position.
- Do not put the appliance away if it is still hot.
- Do not expose the appliance to extreme
temperatures.
- Check that the lid is closed properly before
starting the appliance.
- Do not use the appliance to store open beer
kegs.
- Any misuse or failure to follow the instructions
for use renders the guarantee and the
manufacturer’s liability null and void.
Electrical safety:
- Do not use the appliance if the cable or plug is
damaged.
- Ensure that the voltage indicated on the rating
label and voltage selector matches the mains
voltage before plugging in the appliance.
- The appliance’s plug must fit into the mains
socket properly. Do not alter the plug. Do not use
plug adaptors.
- Only use the appliance with the specific plugs
and cables provided.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain
or exposed to moisture. If water gets into the
appliance, this will increase the risk of electric
shock.
- If any of the appliance’s casing breaks,
immediately disconnect the appliance from the
mains to prevent the likelihood of an electric
shock.
- Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
Installation:
- Do not cover or obstruct any of the openings of
the appliance.
Installing the beer keg:
- The appliance is suitable for use with 4, 5 and
6 litre beer kegs (pressurised), which are sold in
most major liquor outlets.
- Read the installation procedure and
instructions for use, as provided by the beer keg
manufacturer, very carefully before installing the
keg into this appliance.
- Make sure the use by date of the beer keg has
not passed.
- Do not force the electrical connection wire.
Never use the electric wire to lift up, carry or
unplug the appliance.
- Open the lid (B) and place the beer keg in the
cavity of the appliance (Fig.1)
- Do not wrap the power cord around the
appliance.
- Ensure that the electric cable does not get
trapped or tangled.
- Keep the appliance well away from heat
- Ensure that the tap of the keg is in the “Close”
position
- Attach the rubber connectors to the beer keg
outlet hose (Fig.2 & Fig.3) making sure the
clamps are secured tightly.
MW_BDM001_Beer Dispenser_IM.indd 4
2008/07/22 08:46:50 AM
- Turn the tap of the beer keg to the “Open”
position
- Close the lid (B).
appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- Do not use this device before operating any type
of machinary or motorised vehicle.
- The beer expiry dates (printed on the keg) must
be adhered to.
- Most kegs will not go “flat”, once opened, for up
30 days (depending on the type of keg).
- To obtain optimum cold temperatures, it is
recommended that the keg is placed in the
refrigerator before use.
- To obtain optimum pressure levels, it is
recommended that the beer is consumed within 5
hours after opening the keg.
- Remember to open the tap on the keg before
using the dispenser nozzle.
Anomalies and repair:
- Take the appliance to an authorized technical
support service if problems arise. Do not try
to dismantle or repair the appliance yourself,
as this may be dangerous and will render the
manufacturer’s guarantee void.
- If the connection to the mains has been
damaged, it must be replaced and you should
proceed as you would in the case of damage.
Ecology and recyclability of the product:
- The materials of which the packaging of this
appliance consists are recyclable. Should you
wish to dispose of them, use appropriate public
waste containers for each type of material.
- The product does not contain concentrations
of substances that could be considered harmful
to the environment. Should you wish to dispose
of the product once its working life has ended,
take it to an authorised waste collection agent for
recycling.
Instructions for use
Before use:
- Make sure that all of the product’s packaging
has been removed.
- Ensure that the selected the voltage selector
coincides with the mains.
Use:
- Extend the cable completely before plugging it
in.
- Ensure that the electronic connector is properly
attached to the appliance.
- Connect the appliance to the mains.
- Open the cover
- Insert keg
- Close cover
- Turn the thermostat control to the desired
temperature position.
Practical recommendations:
- To speed up the cooling and start up of the
appliance we recommend you buy previously
cooled kegs of beer, or place your keg in the
refrigerator prior to use in this appliance.
Once you have finished using the appliance:
- Stop the appliance; turn the power control/
switch to the 0 position.
- Unplug the appliance from the mains.
- Remove the keg of beer.
- Close the lid.
- Always clean the appliance after each use.
Cleaning:
- Once the appliance is switched off disconnected
from the mains, allow it to cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use harsh solvents, or products with
an acid or base pH such as bleach, or abrasive
products for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of the
MW_BDM001_Beer Dispenser_IM.indd 5
2008/07/22 08:46:50 AM
27 Nourse
Avenue Epping
2
Cape Town
P.O. Box 975 Eppindust 7475 South Africa
Tel: +27 21 534 8114 Fax: +27 21 534 8086
Service Centre Share Call: 086 111 5006
w e b : w w w. c r e a t i v e h o u s e w a r e s . c o . z a
MW_BDM001_Beer Dispenser_IM.indd 6
2008/07/22 08:46:51 AM
|