MD6885.O/M.QXD 1/15/02 10:07 PM Page 18
PERSONAL AM/FM STEREO/COMPACT DISC
PLAYER WITH 45 SECOND DIGITAL ANTI-SHOCK
PROTECTION
MODEL: MD6885
BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE
INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
MD6885.O/M.QXD 1/15/02 10:07 PM Page 2
SAFETY PRECAUTIONS (CONTINUED)
INFORMATION:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Do not open the CD compartment while the CD is rotating.
• Always keep the CD compartment closed when not in use.
• Keep all foreign objects out of the CD compartment.
• Place the unit on a stable surface.
• Avoid installing the unit in locations described below:
• Places exposed to direct sunlight or close to heat radiating
appliances such as electric heaters.
• On top of other stereo equipment that radiates too much
heat.
• Placed lacking ventilation or dusty places.
• Places subject to constant vibration.
• Humid or moist places.
2
MD6885.O/M.QXD 1/15/02 10:07 PM Page 3
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of
your musical enjoyment. Now it’s time to consider how you can maximize the fun and
excitement your equipment offers. This manufacturer and the Electronic Industries
Association’s Consumer Electronics Group want you to get the most out of your equipment
by playing it at a safe level. One that lets the sound come through loud and clear without
annoying blaring or distortion and, most importantly, without affecting your sensitive
hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard
against this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without
distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since
hearing damage from loud noise is often undetectable until it is too late, this manufacturer
and the Electronic Industries Association’s Consumer Electronics Group recommend you
avoid prolonged exposure to excessive noise. This list of sound levels is included for your
protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT
EXPOSURE:
We
WantYou
LISTENING
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
ForALifetime
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
3
MD6885.O/M.QXD 1/15/02 10:07 PM Page 4
LOCATION OF CONTROLS
12. PLAY/PAUSE (
ON Button
) /POWER
1. Display
2. MODE Button
13. PRESET UP Button
14. STOP ( )/ POWER OFF
Button
3. ESP/BAND Button
4. PROG. (Program) Button
5. PRESET DOWN Button
6. SKIP/SEARCH/Tuning –
15. SKIP/SEARCH/Tuning +
(
) Button
(
) Button
16. Battery Compartment
(Bottom of Unit)
17. FUNCTION (CD/RADIO)
Switch
7. LINE OUT Jack (Side of Unit)
8. PHONES Jack (Side of Unit)
9. VOLUME Control
10. DBBS (Bass Boost) Switch
11. DC 4.5V Jack (Rear of Unit)
18. CD Door Open Button
+
–
4
MD6885.O/M.QXD 1/15/02 10:07 PM Page 5
POWER SOURCES
This CD player requires either two “AA” cell batteries (not included) or a AC
adapter(notincluded).
BATTERY INSTALLATION
The battery indicator ( ) will appear in the CD display when the batteries
needreplacing.
1. Open the battery compartment door on the
bottom of the unit by sliding it out and then
lifting it. To prevent the possibility of losing
the cover, it cannot be removed.
+
–
+
–
2. Insert two (2) “AA” cell batteries (not included)
according to the polarity diagram inside the
battery compartment. Alkaline batteries are
recommended for the longest playing time.
–
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
AC OPERATION
To operate the unit using AC power, connect the AC adapter (not included) to
an AC outlet having 120V, 50/60Hz AC only. Plug the small end into the DC
4.5V jack on the unit and connect the other end into the AC outlet. The
batteriesareautomaticallydisconnectedwhentheACadapterisused.
CAUTION: When not using AC power, disconnect the AC adapter from the
wall outlet by pulling the plug ( not the cord ). Do not touch the AC adapter
withwethands.Fullyinserttheplugwithoutexposinganypartoftheblade.
DC4.5V
5
MD6885.O/M.QXD 1/15/02 10:07 PM Page 6
RADIO OPERATION
TO LISTEN TO THE RADIO
1
2
Set the VOLUME control ❶ to minimum
and plug the headphone into the PHONES
Slide the FUNCTION switch ❶ to the
RADIO position. Press the ESP/BAND
button ❷ to select a band (AM or FM).
If listening to FM, press the MODE button
❸ to turn FM Stereo ON or OFF.
jack. Press the PLAY/PAUSE
)
(
/POWER ON button ❷ to turn the unit on.
3
4
Press and release the SKIP/SEARCH – Adjust the VOLUME control ❶ and DBBS
switch ❷ as desired. If FM STEREO
reception is weak/noisy, press the MODE
button ❸ to turn off Stereo, in this case
the reception will be monaural.
❶ or +
station. Press and hold the
SKIP/SEARCH – ❶ or +
button ❷ to tune a
button ❷ for rapid search tuning.
ANTENNAS
5
AM – This unit has a built-in ferrite bar
antenna, which provides adequate reception
in most areas. If reception is weak, turn the
unit to improve reception.
FM – The headphones act as an antenna for
FM. Extend the headphone wire for best FM
reception.
To turn the radio off, press the STOP
(I)/POWER OFF button.
AUTO SCAN
Press and hold the SKIP/SEARCH –
or
+
button for approximately 1 second and
the unit will automatically search for the next
available station.
6
MD6885.O/M.QXD 1/15/02 10:07 PM Page 7
RADIO OPERATION (CONTINUED)
TO SET AND RECEIVE A STATION INTO MEMORY
1
2
While the PROG. indicator is blinking,
select the desired preset using the
PRESET UP ❶ or DOWN button ❷, then
press the PROG button ❸ to set the
memory.
Tune a desired station as described in
the previous section. Press the
PROG. button; the PROG. indicator
and preset number will blink in the
display.
3
To receive a preset station, simply
press the PRESET UP ❶ or DOWN
button ❷ to select the desired preset.
Radio Sound Through a Home Audio System
By using a home audio connection cable (not included), superb radio sound can
be heard through your home audio system. Before making any connections, turn
off the power to all equipment.
Plug a connection cable (not included) between the LINE OUT jack on the side of
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the
amplifier’s PHONO jack.)
NOTE: If the radio interferes with TV reception, move the unit away from the TV or
turn off the power to this unit.
7
MD6885.O/M.QXD 1/15/02 10:07 PM Page 8
CD OPERATION
TO REMOVE A CD
TO INSERT A CD
1
1
Open the CD compartment lid by Make sure the CD has stopped and
sliding the CD Open switch to the open the CD compartment lid. Hold the
right. Gently press a disc, label side edge and gently press the center pivot,
up, onto the spindle until it locks in then pick up the disc.
place. Close the CD compartment lid.
BASS BOOST
TURNING POWER ON /OFF
1
1
To emphasize the bass, slide the To turn the unit on, press the
DBBS switch to the ON position. For
normal bass, slide the DBBS switch to
the OFF position.
PLAY/PAUSE (
button ❶.
To turn unit off, Press the STOP (I)
)/POWER ON
/POWER OFF button ❷.
AUTO POWER OFF
When the unit is stopped (Standby mode) for approximately 1 minute, the power
will automatically turn off.
8
MD6885.O/M.QXD 1/15/02 10:07 PM Page 9
CD OPERATION (CONTINUED)
TO PLAY A CD
2
1
Insert a CD as described on the While the unit is off, press the
previous page. Insert headphones into
the PHONES jack. Slide the
FUNCTION switch to the CD position.
PLAY/PAUSE (
button to start playback. To pause
PLAYBACK, press the PLAY/PAUSE
)/POWER ON
(
)/POWER ON button again, the
display will blink.
4
3
Adjust the VOLUME control ❶ and When the disc is through playing, it will
stop. Press the STOP (I)/POWER
OFF button to stop the disc before it is
finished; the total number of tracks and
playing time will appear. Press the
STOP (I)/POWER OFF button again
while in the stop mode or wait
approximately 60 seconds to turn the
unit off.
DBBS switch ❷ as desired. To skip
forward or backward through the tracks
on the disc, press the SKIP/SEARCH –
❸ or +
button ❹. To search
forward or backward through the tracks
on the disc, press and hold the
SKIP/SEARCH –
❸ or +
button ❹.
9
MD6885.O/M.QXD 1/15/02 10:07 PM Page 10
CD OPERATION (CONTINUED)
NOTES:
• This unit is capable of playing standard CDs or 3” singles; no adapter is required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will
show “no disc”.
• As each track is played, the track number and elapsed time are shown in the display.
• To remove the disc, open the CD Compartment, hold the edge of the CD and gently
press the center pivot and lift the CD.
• The maximum time of a CD is 74 minutes for this unit.
ELECTRONIC ANTI-SHOCK SYSTEM
This CD player has a built-in Anti-Shock System that cuts down on CD skipping,
which is useful when using the CD player in the car. Follow the steps below to
activate and understand the Anti-Shock System.
2
1
Insert a CD as described in the TO With a CD inserted, press the
INSERT A CD section and slide the
FUNCTION switch to the CD position.
PLAY/PAUSE (
button to turn the unit on.
)/POWER ON
4
3
The Anti-Shock System will start Within a few seconds, the Anti-Shock
automatically, the sound will mute for indicator will fill to indicate music
a moment and the display will show signals are stored in memory.
the Anti-shock indicator with no bars
in it.
CONTINUED ON THE NEXT PAGE
10
MD6885.O/M.QXD 1/15/02 10:07 PM Page 11
CD OPERATION (CONTINUED)
6
5
If the CD player is subject to vibration If all the bars disappear and the CD
during playback, the bars will player is subject to immediate vibration,
disappear one by one. During the the unit may skip.
vibration, the music should continue to
play the signals stored in the memory
until the CD player can read the music
data properly from the disc. At this
time, the indicator will probably show
fewer bars indicating the music signals
stored in memory are low.
8
7
If no more vibration occurs, the To turn the Anti-Shock System off,
music signals are once again stored press the ESP/BAND button.
into the memory and the indicator To turn the Anti-Shock System on,
returns to full. When the memory is press the ESP/BAND button again.
full, the top bar will blink and the
disc rotation speed will drop to save
power consumption.
NOTES:
•
•
When the CD player is used in a stable location, turn the Anti-Shock System
off by pressing the ESP/BAND button. When the Anti-Shock System is Off,
battery consumption is less.
The Anti-Shock System provides for continuous sound output when unit is
subject to vibration, but it will not correct errors, such as a defective dirty CD.
11
MD6885.O/M.QXD 1/15/02 10:07 PM Page 12
CD OPERATION (CONTINUED)
TO REPEATEDLY PLAY BACK ONE TRACK
2
1
With a CD inserted, press the The unit will then play the same track
over and over until the STOP
(I)/POWER OFF button ❶ is pressed.
Adjust the VOLUME control ❷ and
DBBS switch ❸ as desired.
PLAY/PAUSE (
button ❶ to turn the unit on. Press the
MODE button ❷ once; the Repeat 1
)/POWER ON
indicator
will appear in the display.
TO REPEATEDLY PLAY BACK ALL TRACKS
1
2
With a CD inserted, press the
The unit will then play all the tracks on
the CD over and over until the STOP
(I)/POWER OFF button ❶ is pressed.
Adjust the VOLUME control ❷ and
DBBS switch ❸ as desired.
PLAY/PAUSE (
)/POWER ON
button ❶ to turn the unit on. Press the
MODE button ❷ twice; the Repeat All
ALL
indicator
display.
will appear in the
TO CANCEL OR STOP REPEAT PLAYBACK
• TO STOP REPEAT PLAYBACK, press the STOP (I)/POWER OFF button once.
• TO CANCEL REPEAT PLAYBACK, press the MODE button so that the
Repeat 1 or Repeat ALL indicator disappears in the display. The unit will
continue normal playback.
12
MD6885.O/M.QXD 1/15/02 10:07 PM Page 13
CD OPERATION (CONTINUED)
INTRO PLAY
2
1
With a CD inserted, press the
Press the PLAY/PAUSE (
)/POWER
PLAY/PAUSE (
)/POWER ON ON button ❶ to begin playback. The unit
button ❶ to turn the unit on and press
will play the first 10 seconds of each
the STOP (I)/POWER OFF button ❷ track. Adjust the VOLUME control ❷
to stop auto playback. Press the and DBBS switch ❸ as desired. Press
MODE button ❸ 3 times; the INTRO
the STOP (I)/POWER OFF button ❹
indicator will blink in the display.
to stop Intro playback.
TO RANDOMLY PLAY BACK A CD
1
2
With a CD inserted, press the
Press the PLAY/PAUSE (
)/POWER
PLAY/PAUSE (
)/POWER ON ON button ❶ to begin playback. The
button ❶ to turn the unit on and press
unit will play all the tracks in random
the STOP (I)/POWER OFF button ❷ order. Adjust the VOLUME control ❷
to stop auto playback. Press the and DBBS switch ❸ as desired. When
MODE button ❸ 4 times; the RAND
indicator will blink in the display.
all the tracks have been played, the
unit will stop. Press the STOP
(I)/POWER OFF button ❹ to stop
Random playback.
13
MD6885.O/M.QXD 1/15/02 10:07 PM Page 14
CD OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
2
1
With
PLAY/PAUSE
a
CD inserted, press the
)/POWER ON
(
Select the first track to be played back
button ❶ to turn the unit on and press
the STOP (I)/POWER OFF button ❷ to
stop auto playback. Press the PROG.
button ❸; the PROG indicator will
appear in the CD display.
using the SKIP/SEARCH –
❶ or +
button ❷, then press the PROG.
button ❸ again. Repeat this step to
program additional tracks up to a
maximum of 24 tracks.
4
3
To skip forward or backward through
the programs, press the SKIP/SEARCH
Press the PLAY/PAUSE
/POWER ON button ❶ to begin
(
)
–
❶ or +
button ❷. When the
Program playback and adjust the
VOLUME control ❷ and DBBS switch disc is through playing, it will stop.
❸ as desired.
NOTES:
•
•
•
Press the STOP (I)/POWER OFF button to stop the disc before it is finished.
As each program is played, the track number is shown in the display.
To clear the memorized program: press the STOP (I)/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will turn
off or open the CD compartment.
•
•
Programming is the ability to preselect the order in which a series of tracks
will be played.
Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
14
MD6885.O/M.QXD 1/15/02 10:07 PM Page 15
CARE AND MAINTENANCE
Caring for Compact Discs
•
Treat the compact disc carefully. Handle the
compact disc only by its edges. Never allow your
fingers to come in contact with the shiny,
unprinted side of the compact disc.
•
•
Do not attach adhesive tape, stickers, etc. to
the compact disc label.
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use
detergents or abrasive cleaners to clean the compact disc. If necessary, use a
CD cleaning kit.
•
If a compact disc skips or gets stuck on a section of the disc, it is probably dirty
or damaged (scratched).
Z
COMPACT
•
•
When cleaning the compact disc, wipe in straight lines from the
center of the compact disc to the outer edge of the compact disc.
Never wipe in circular motions.
DIGITAL AUDIO
This unit is designed to play only compact discs bearing the identification logo
as shown here. Other compact discs may not conform to the CD standard and
may not play properly.
•
•
Compact discs should be stored in their cases after each use to avoid
damage.
Do not expose compact discs to direct sunlight, high humidity, high
temperatures, or dust, etc. Prolonged exposure or extreme temperatures can
warp the compact disc.
•
Do not stick or write anything on either side of the compact disc. Sharp writing
instruments, or the ink may damage the surface.
Cleaning the unit
•
•
•
To prevent fire or shock hazard, disconnect your unit from the AC power
source when cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other
furniture. Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
15
MD6885.O/M.QXD 1/15/02 10:07 PM Page 16
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
Unit will not
turn on.
CAUSE
SOLUTION
Weak or dead batteries Replace batteries and insert
or inserted incorrectly. correctly.
Weak or dead Re-
chargeable batteries.
AC adapter
not connected.
CD compartment
not closed.
Recharge or replace
batteries.
Check AC adapter
connection.
Disc will not play.
Close CD compartment.
Disc inserted
incorrectly.
Dirty or defective
disc.
Reinsert disc correctly.
Try another disc.
Moisture
condensation
on disc.
Wipe disc with soft
cloth.
Erratic CD playback.
Dirty or defective
disc.
Clean or replace disc.
No sound from
headphones.
Headphone
plug not inserted
correctly.
Reinsert headphone
plug correctly.
VOLUME control
set to minimum.
Weak batteries.
Defective disc.
ESP is not activated.
Station not tuned
Increase volume.
Replace batteries.
Try another disc.
Press the ESP/BAND button.
Retune AM or FM
ESP not working.
Noise or sound
distorted on radio.
properly for AM or FM
.
broadcast station.
FM: Headphone wire
not extended.
Extend Headphone wire.
AM: Unit is not
Rotate unit until best
reception is obtained.
Retune station.
Press MODE button to turn
Stereo on.
positioned correctly.
Poor FM signal.
FM MODE button
not set to Stereo.
FM STEREO indicator
does not light.
No sound.
FUNCTION switch is not Set FUNCTION switch to the
in the desired position. desired function.
16
MD6885.O/M.QXD 1/15/02 10:07 PM Page 17
Memcorp, Inc.
Weston, Fl
Printed in Hong Kong
|