INSTALLATION INSTRUCTIONS FOR PART 99-5808
APPLICATIONS
2004-2007 Ford Freestar
2004-2007 Mercury Monterey
2005-2007 Ford Focus
2005-2007 F Series Super Duty
99-5808
KIT FEATURES
• DIN Head Unit Provisions with Pocket
• ISO DIN Head Unit Provisions with Pocket
KIT COMPONENTS
A) Radio Housing
•
B) ISO Brackets
•
C) Trim Plate
C
B
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• Wiring Harness:
A
• 70-5520 - Ford harness 2003-up
• 70-5521 - Ford amplified harness 2003-up
• Antenna Adapter: Not required
TOOLS REQUIRED: Socket Wrench
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
99-5808
FORD FREESTAR 2004-2007
MERCURY MONTEREY 2004-2007
A
Disconnect the negative battery terminal
to prevent an accidental short circuit.
1
2
Unsnap and remove entire panel surrounding
radio and climate controls. (FIGURE A)
3
Remove (4) 7mm screws to remove
factory radio. (FIGURE B)
B
FORD FOCUS 2005-2007
1
2
Disconnect the negative battery terminal to
prevent accidental short circuit.
A
Unsnap and remove entire panel surrounding
the radio and climate controls.
(FIGURE A)
Remove (4) 7mm screws to remove factory
radio.
3
1
99-5808
F SERIES SUPER DUTY 2005-2007
Disconnect the negative battery terminal
to prevent an accidental short circuit.
1
2
A
Unsnap and remove entire panel sur-
rounding radio and climate controls.
(FIGURE A)
3
Remove (4) 7mm screws to remove
factory radio.
2
99-5808
DIN HEAD UNIT PROVISIONS:
Slide the DIN cage into the
Radio Housing and secure by
bending the metal locking tabs
down. (Figure A)
1
2
Slide the after-market head
unit into the cage and secure.
(Figure B)
ISO DIN Head Unit Provision
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit.
1
Slide the head unit into the radio
opening until the side clips engage.
2
3
Snap the Trim plate into the Radio
Housing.
3
99-5808
A
B
A)
B)
C)
D)
Strip wire ends back 1/2"
Twist ends together
Solder
Tape
C
D
Locate the factory wiring har-
ness in the dash. Metra recom-
mends using the proper mating
adapter and making the con-
nections as shown. (Isolate and
individually tape off the ends of
any unused wires to prevent
electrical short circuit)
1
Re-connect the negative battery
terminal and test the unit for
proper operation.
2
Reassemble radio and dash
assemblies in reverse order of
disassembly.
3
4
99-5808
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
5
INST995808
1-800-221-0932
REV. 04-20-09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION INST99-5808
|