Issued May 2008 • Index No. EX/5.2
Engine Driven
®
Welding Generator
Big Blue 401DX
Industrial Applications
Structural Work
Mining
Processes
Rated Output at 40˚C (104˚F) 400 A at 30 VDC, 40% Duty Cycle
DC Stick (DC SMAW)
Air Carbon Arc (CAC-A)
Cutting and Gouging
thru 6 mm (1/4 in)
DC TIG (GTAW)
300 A at 32 VDC, 100% Duty Cycle
Quick
DC Amperage Range 40–400 A
Maintenance and Repair
Piping
Specs
Generator Power 3 kVA, 120/240 VAC, 26/13 A, 50/60 Hz while welding
Weight Net: 670 kg (1475 lb) Ship: 685 kg (1510 lb)
Flux Cored (FCAW)
®
The Power of Blue.
Rugged controls with no printed
circuit boards.
The F3L2011, 3-cylinder Deutz diesel
engineprovides 30 HP at 1850 RPM.
Single side service. Direct fuel injection
for fuel economy and easy starts. Air/oil
double-cooled diesel for maximum
reliability in all environments.
Remote control facility allows
precise adjustment of amperage
without walking back to the machine.
3 kW/kVA auxiliary power while
welding is available from one
120 VAC duplex receptacle and one
240 VAC duplex receptacle that are
circuit breaker protected.
Five welding ranges provide
overlapping ranges and fine current
control in each range for easy set-up
and control of welding amperage.
Compact and lightweight, this low-
speed diesel measures in at 625 x
927 x 1422 mm (24-5/8 x 36-1/2 x
56 in).
3-phase, 4-pole revolving field
technology provides efficient welding
current with less horsepower than DC
generator technology—less horsepower
per welding amp saves fuel—as much
as 20 to 30 percent. Easily connects in
parallel with no special kits for heavy
gouging or stud welding applications.
Note: Parts and labor warranted for three years.
Engine warranted by Deutz for three years.
Specifications
(Subject to change without notice.)
Weld
Mode
Weld Output
Range
Weld Output Rated at
40˚C (104˚F)
Max. Open-Circuit Generator Power Output
Voltage
Rated at 40˚C (104˚F)
Dimensions
Weight (without fuel)***
40– 400 A
CC/DC
400 A, 30 VDC, 40% Duty Cycle
300 A, 32 VDC, 100% Duty Cycle*
95 (90)
3 kVA, 120/240 VAC,
26/13 A, 50/60 Hz while
welding
H: 927 mm (36 in)**
W: 625 mm (24-5/8 in) Ship: 685 kg (1510 lb)
D: 1422 mm (56 in)
Net: 670 kg (1475 lb)
*NEMA output rating. **Height is 1029 mm (40-1/2 in) with muffler. ***Additional 136.5 kg (80.5 lb) with tank is full
Engine Specifications (Subject to change without notice.)
Engine Brand Features
HP
Type
Engine Speeds
Fuel Capacity Oil Capacity Automatic Engine Shutdown
Deutz
F3L2011
Tier 0, direct-injected, air/oil-cooled
30.3
Three-cylinder, Run: 1850 RPM 43 L
5.5 L
(6 qt)
Low Oil Pressure
High Oil Temperature
engine. Right-side service access
with service intervals of 1000 hours
for oil and filters.
industrial,
liquid-cooled
diesel
(11.3 gal)
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
International Headquarters Web Site
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Trailers and Hitches
OFR-224 Trailer #043 802
A 1202 kg (2650 lb) capacity off road
trailer. Welded steel tubing frame, heavy-
duty axle with roller bearing hubs and
leaf spring suspension. The OFR-224
comes with jack stand and 50 mm (2 in)
ball hitch.
HWY-224 Trailer #043 805
4 West Four-Wheel Steerable Off-Road
Trailer #042 801
Lunette Eye 64 mm (2-1/2 in) #043 824
For use with both 224 trailers.
A 1202 kg (2650 lb) capacity highway
trailer. Welded steel tubing frame, heavy-
duty axle with roller bearing hubs and
leaf-spring suspension. The HWY-224
comes with jack stand, 50 mm (2 in)
ball hitch, fenders and lights.
A heavy-duty 1166 kg (2570 lb) capacity
trailer designed for use in mines, quarries,
and other rough terrain. Has narrow 6.7 m
(22 ft) turning radius. Includes 76 mm (3 in)
lunette eye, universal hitch and safety chains.
Cable Tree #043 826
Provides an area to conveniently wrap weld
cables and extension cords. Works on all
224 and 430 trailers.
Note: Trailers are shipped unassembled.
Trailer Specifications (Subject to change without notice.)
Gross Axle
Weight
Rating
Gross
Vehicle
Weight Rating Payload
Track
(Center to
Standard Tires
(Standard rating
Net
Height
of Bed
Road
Net
Weight
Model
Clearance center of tires) or P-size rating) Dimensions
HWY-224 1588 kg
OFR-224 (3500 lb)
1343 kg
(2960 lb)
1202 kg
(2650 lb) (470 mm)
18-1/2 in
191 mm
(7-1/2 in)
1321 mm
(52 in)
B78-13C
Length:3112 mm (122-1/2 in)
Width: HWY– 1549 mm (61 in)*
OFR–1486 mm (58-1/2 in)
161 kg
(355 lb)
4 West
907 kg/axle
(2000 lb/axle) (3000 lb)
1361 kg
1166 kg
(2570 lb) (21-1/4 in)
540 mm
203 mm
(8 in)
1403 mm
(55-1/4 in)
B78-13
Length:2311 mm (91 in)**
Width: 1556 mm (61-1/4 in)
1950 kg
(430 lb)
*Width at outside of fenders. **Does not include tongue.
What Makes Miller Industrial Engine Drives So
Every component in a Miller industrial engine drive is engineered and built to assure
ultimate reliability in the most punishing conditions. And they are rigorously tested to
the toughest real-world conditions to keep working in a tough world.
?
Similar models to consider:
Big Blue® 400 X
See Lit. No. EDX/10.1
Ultimate Circuit Board Protection
For the professional
heavy-duty construction
contractor, pipeline, rental
company or anyone wanting
No matter how well it’s built, any machine can fail if its critical circuit boards are
compromised. Miller makes two types of industrial engine drives, both of which ensure
that no critical circuit boards are left vulnerable.
a fuel-efficient low-speed diesel-powered
“CC” Stick and TIG Models — Miller’s robust, efficient constant current (CC) industrial
engine drives for Stick and TIG welding are designed with no circuit boards that are critical
to the machine’s operation. That means no boards can shut down the machine if they fail.
multiprocess welder/generator with precise arc
control. The heavy-duty, compact case easily
fits sideways in a standard pickup bed. This
model provides the quietest operation of Miller’s
engine-drive machines.
“CC/CV” Multiprocess Models — Miller’s Multiprocess
PRO 300 and Big Blue® models of industrial engine drives
include circuit boards for superior arc control and welding
versatility. These boards are protected by the Vault, a
hermetically-sealed aluminum case that is impenetrable to
dust, salt, and moisture.
Big Blue® 500 X and
600 X
See Lit. No. EDX/10.11
For fleet owners, heavy-duty
construction contractors,
and rental companies who
want a low-speed diesel-
powered welder/generator with rugged reliability
and proven performance. Ideal for really tough
jobs that may be using larger electrodes for Stick
welding or Carbon Arc gouging. Available in either
a Stick/TIG CC only model, or a more versatile
CC/CV multiprocess model. Easy to maintain and
always ready to weld no matter what the job or
conditions demand.
“Other machines would cut out when we gouged too long
with them. With the Miller, I gouged hard all day in 98 degree
heat and never had a shutdown when we were running
3/8-in carbons.” When welding, “The Big Blue starts out
hot, where I want it, and stays steady on its heat all day.”
— Welder Tommy Langley, Fluor Daniel/Chevron Oil Refinery
3
Ordering Information
Power Source
Stock No.
#903 175
Description
Qty.
Price
Big Blue 401DX CC
Dry Battery, 50/60 Hz
Accessories
Spark Arrestor (Muffler) Kit
Weld Meter Kit
#042 317
#041 567
#042 596
Field
Field
CC-10 Canvas Cover
Stick Accessories
Accessory Kits
#173 851
#043 952
2/0, 350 A, 100% duty cycle, 15 m (50 ft) stinger, 15 m (50 ft) work clamp
2/0, 300 A, 100% duty cycle, 30.5 m (100 ft) stinger, 15 m (50 ft) work clamp
Remote Controls
RHC-3GD34A
#041 122
Includes 6m (20 ft) cord
Trailers and Hitches
HWY-224 Trailer
OFR-224 Trailer
#043 805
#043 802
#043 824
#043 826
#042 801
Lunette Eye, 64 mm (2-1/2 in)
Cable Tree
For use with both 224 trailers
Works on all 224 and 430 trailers
4 West Trailer
Date:
Total Quoted Price:
Distributed by:
Litho in USA
|