TSB-9137B
Revised 04-06
Catalog Section 10
(00-02-0051)
Direct Mount Temperature Switch
Model TSB
■
Limit Switch for Critical Temperature
■
Operate Alarms or
Shutdown Equipment
■
■
SPDT Snap-Acting Switch
Fits Most Engine Applications
**
Description
Applications
• Engine Coolant
• Irrigation Systems
• Compressors
• Oil Field Systems
• Engine Lubrication
• Construction equipment
• Mobile Equipment
• Marine Engines
• Generators
Specifications
The TSB switch is a direct mount switch for
temperature sensing. It has one limit contact
that can be used to activate an alarm, actuate
indicator lights or shut down equipment.
Housing: Plated steel.
Connections: Popular NPT and metric
(specify).
Diaphragm: Formed beryllium copper (heat
treated).
Sensing Bulb: Copper.
Terminal Block: Three # 4-40 screws.
Accuracy: See chart on page 2.
Contact Rating: SPDT 3 A @ 30 VDC
inductive.
Maximum Temperature: 325°F (163°C).
Factory Trip Point Setting: 210°F (99°C)
Rising.
Contact: Operates on rising temperature
only.
Shipping Weight: 10 oz (0.31 kg).
The construction of this instrument is the
same as our time-proven Swichgage . A
®
precision machined brass mounting plate and
port captures a high quality stamped
beryllium copper diaphragm. The single-
pole, double-throw (SPDT) snap switch is
operated directly from the diaphragm, for
quick acting and positive switching. Trip
point is factory preset according to your
specifications.
• Electric Motors
Features
•
Fits most engine applications
• SPDT snap-switch
• Activates indicator lights, alarms or shut
Housing is weather sealed to prevent entry of
moisture, dust, etc. A glass-filled nylon
terminal block with quick-screw terminal
connections gives the TSB switch a real
advantage in industrial engine applications.
The TSB is ideal when reading is not
desired, but temperature is critical to
operational efficiency.
down equipment
Shipping Dimensions: 4-3/4 x 4-3/4 x
2-5/8 in. (121 x 121 x 67 mm).
• Time-proven Swichgage construction
• Easy wiring terminal block
• Steel housing specially coated to
resist corrosion
NOTE: No customer replacement parts.
• Trip point is factory preset to your
specifications (minimum quantities apply)
Intended for use in general purpose non-
classified areas.
**Products covered by this bulletin comply with EMC Council directive 89/336/EEC regarding
electromagnetic compatibility except as noted.
TSB-9137B page 1 of 2
|