NETGEAR Roku Player (NTV250)
Installation Guide
Package Contents
2 AAA batteries
NETGEAR Roku Player
Remote control
Power adapter
A/V cable
3
Your Player at a Glance
4
1: Connect to the TV
Choose the setup that matches the ports on your TV. For best
picture quality, use an HDMI connection (if available). Make
sure your TV is on and set to display the correct video input.
HDMI (preferred)
Connect an HDMI cable (sold separately) to the HDMI port on
your player and to the HDMI IN port on your TV.
TV
NOTE: HDMI supports 5.1 surround sound ( if available). You
don’t need a separate audio cable.
5
AV
Connect the yellow connectors on the A/V cable (included) to
the VIDEO port on your player and the VIDEO IN (Composite)
port on your TV. Connect the red and white connectors to the R-
AUDIO-L ports on your player and the L/R AUDIO IN ports on
your TV.
TV
6
2: Power Up
Insert the batteries in the remote
Slide the bottom half of the remote downward to open the
remote. Insert two AAA batteries (included) in your remote.
Connect the power adapter to your player.
7
3: Get Your Home Network Ready
To use your player, you must connect it to your home network
with either a wireless or a wired connection. We recommend
using a router or wireless access point for your network, in
addition to your broadband modem. After you get your network
ready, Guided Setup helps you connect your player to your
network.
IMPORTANT: Don’t place anything on top of your Roku
player. Placing objects on top of your player may interfere
with the wireless signal or cause the player to overheat.
If you’re using a Wired connection, use an Ethernet cable
(sold separately) to connect your player to your router.
Router
8
If you’re using a Wireless connection, place your player
within range of your wireless network and avoid enclosing your
player in a cabinet. If you use a password, have it ready.
Router
Tip: If you don’t receive a strong signal during
Guided Setup, try rotating your player or
moving it closer to your router.
9
4: Complete Guided Setup
On your TV:
•
Use the remote to follow the onscreen instructions. Your
player may download software updates or restart during
setup.
•
When Guided Setup prompts you to enter your Roku linking
code, use your computer to go to roku.com/link. Enter the
code that appears on your TV screen and then create a
Roku account, if you do not already have one.
•
•
Once you complete setup, select a channel icon (such as
Netflix or Amazon Video On Demand) to view, or visit the
Roku Channel Store to add more channels (such as the
Pandora Internet radio channel).
Some Roku partners may require you to activate your Roku
player to access their content. Just follow the onscreen
instructions when you launch a channel for the first time.
Tip: Point your remote
directly at your player.
10
5: Basic Remote Functions
NOTE: The
button on the remote control is reserved for
future use.
11
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the
label of your product and use it to register your product at http://
can use our telephone support service. Registration via our
website is strongly recommended.
support.
GPL may be included in this product; to view the GPL license
For complete DoC, please visit the NETGEAR EU Declarations of
detail/a_id/11621
12
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
August 2010
|