Specifications
OUTPUT .................................. 1/4” jack (unbalanced) THD .................................................................... 1.5%
OUTPUT LEVEL (max, nominal)......... 0dBv / -10dBv S/N RATIO .......................................................... 85dB
OUTPUT IMPEDANCE ................ 10K min - 70K max NOISE FLOOR ................................................... 34uV
INPUT ...................................... 1/4” jack (unbalanced) AC/AC ADAPTER ....................................... 95V-130V
INPUT LEVEL (max, nominal) ...... -30dBv / >+20dBv
INPUT IMPEDANCE ........................................... 1MΩ
AUDIO RESPONSE
Tube Type ............................................... (2x) 12AX7A
Dimensions ... 5.5” x 5.7” x 1.5” (14 x 14.5 x 3.75 cm)
Weight ................................................ 2.6 lbs (1.8 Kg)
(controls adjusted) ................ 50Hz-16kHz @ +/-3dB
OWNER’S MANUAL
General Notes
Although the TTV-2 is very ruggedly housed in heavy gauge steel, care should be taken in handling
the unit as the tube utilized is made from glass. Avoid physical abuse. The footswitch is all that is
needed to switch the unit.
Service for your Nady Audio Product
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service
Department via telephone at (510) 652-2411, or e-mail at [email protected].
(International) For service, please contact the NADY AUDIO distributor in your country
through the dealer from whom you purchased this product.
DO NOT ATTEMPT TO SERVICE THIS UNIT
YOURSELF AS IT CAN BE DANGEROUS AND
WILL ALSO VOID THE WARRANTY.
TTV-2
Dual Tube Vibrato and
Tremolo Effects Pedal
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411
•
|