Nortel Networks Telephone ICS 41 User Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •  
Compact ICS 4.1 Programming Record  
• • • • • • • • • • • • • • • • • • • • • • • • • •  
 
iv  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 1  
Customer/Company  
Supplier  
Address  
Customer service representative  
Telephone  
Telephone  
Billing number  
System coordinator  
Installer  
Installation date  
All defaults (for the Square template) are shown in bold and underlined text.  
Copying set programming  
You can use COPY to copy programming from one telephone to another set, a range of sets or all the sets. Depending on where  
the display button is pressed, you will copy either all the programming for a telephone or only the programming found under  
one of the individual sub-headings.  
For general set copying, you can choose what part of the programming will be used. The choices are:  
SYSTEM – the system administration programming (system data) of a set  
SYSTEM+USER – the system administration programming PLUS the programming for a particular set (user data)  
System Data which will be copied  
System data which will NOT be copied:  
Priority Calling  
Paging  
Redirect Ring  
Auxiliary Ringer  
DND on Busy  
Hotline  
Line access  
Line access  
Line assignment  
Private line appearances  
Answer DNs (unless Answer button DN is same as set being copied to)  
Line pool access  
Prime line designation  
Number of intercom keys  
Outgoing line identification (OLI)  
Capabilities  
Set Name  
Use ringback setting under ATA settings  
(for I-ATA only)  
Handsfree Answerback  
Handsfree Setting  
Direct-dial (which set is reached by  
Restrictions  
Telco features  
Log password  
Log space  
the D-Dial digit)  
Set restrictions  
Pickup Group  
Paging Zone  
SLR redirection  
ATA settings (except Use ringback  
setting)  
Set Lock  
Allow Last Number Redial  
Allow Saved Number Redial  
Allow Link  
CAP assignment  
Direct-dial set designation  
ExtraDial set designation  
Service mode ringing set designation  
Prime set designation for a line  
Hunt group appearances  
Line/set restrictions  
Telco Features  
Capabilities  
1stdisplay  
Allow Redirect  
Caller ID set (Auto call info)  
Call log set (Logging set)  
Call Forward No Answer (DN or Route + destination + delay)  
Call Forward Busy (DN or Route + destination)  
User data which will be copied:  
Language choice  
User data which will be copied if  
User data which will NOT be copied:  
CAP module memory button assignments  
Ring volume  
destination set type is the same as the  
source set type:  
Ring type  
Calls log options (  
Display contrast  
External autodial button assignments  
Internal autodial button assignments  
Programmable button assignments  
Auto logging)  
User speed dial entries  
Dialing options (automatic, predial,  
standard)  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 2  
Installed equipment  
0x16 ICS  
Telephones  
Quantity Equipment  
Quantity Equipment  
M7100  
Compact ICS (Integrated Communications System)  
Trunk Cartridge, Loop Start  
M7208  
Trunk Cartridge, CI (Call Information)  
2-line Basic Rate ST I/F line card (Profiles 2 and 3 only)  
4-line Basic Rate ST I/F line card  
M7310  
M7310 with Busy Lamp Field (BLF)  
M7324  
2-line Basic Rate U I/F line card (Profiles 1 and 4 only)  
4-line Basic Rate U I/F line card (Profiles 1 and 4 only)  
Expansion Cartridge (8-port, no clocking)  
Expansion Cartridge with Clocking  
Clocking Cartridge  
M7324 with 1 Central Answering Position (CAP)  
M7324 with 2 Central Answering Positions (CAP)  
International set (Profiles 2, 3 and 4)  
Single-line telephone  
Emergency telephone  
Feature Cartridge  
Data terminals  
Auxiliary equipment  
Quantity Equipment  
Quantity Equipment  
External paging equipment  
External music source  
Station auxiliary power supply  
Auxiliary ringer  
Shoulder rest  
CTA 500dm  
Headset  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 3  
Defaults are shown in bold and underlined  
Programming overview (Profiles 1 and 4)  
Name  
221  
Remote restrns  
Normal  
04  
31  
32  
33  
00  
00  
00  
Profile  
PROF 1  
Lines  
User prefernces  
Night  
Evening  
Lunch  
Show line:_  
Model  
M7208  
Button prgrming  
User speed dial  
Call log opt’ns  
Trunk/Line data  
Dialpad  
Startup  
Q, Z:0  
Sched 4  
Sched 5  
Sched 6  
(If Loopstart)  
Trunk Type  
Line type  
Dial mode  
PrimeSet  
Auto privacy  
Trunk mode  
(if Trunk mode=Super)  
Ans mode  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Full AutoHold  
Loop  
Public  
Tone  
21  
No one answered  
Telco features  
Dialing opt’ns  
Standard dial  
VMsg center  
1
Template  
Start DN  
Square  
21  
Language  
Display cntrst  
Ring type  
English  
Y
4
1
Services  
Unspr  
Restrictions  
Ringing service  
Manual  
Terminals&Sets  
Restrn filters  
Show filter:_  
Restrn 00  
Ringing groups  
Show group:_  
Y
Show set:_  
N
N
Ring grp 01  
Show set:_  
21  
Line access  
No restrictions  
Restrn 01:0  
Deny  
LossPkg  
(If BRI-ST, BRI-U2 or BRI-U4)  
MediumCO  
Line assignment  
Show line:_  
Assigned  
0
Sched: Night  
Service  
Trunk Type  
Line type  
PrimeSet  
Auto privacy  
Ans mode  
BRI-ST  
Public  
21  
No overrides  
Appr&Ring  
L001  
Off  
Y
Set restrns  
Filters  
LinePool access  
Line Pool A  
Trunk answer  
ExtraDial  
N
N
N
21  
Y
02  
11  
Normal  
Night  
Line Pool B  
Line settings  
Show line:_  
Manual  
Line Pool C  
12  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Full AutoHold  
(If Target Line 049-074)  
Target line  
Line type  
Rec’d #  
If busy  
Prime line  
Intercom keys  
Answer DNs  
Show set:_  
None  
2
01  
N
Ring grp  
Aux. ringer  
13  
Y
N
N
00  
Sched:Evening  
Sched:Lunch  
Sched:Sched 4  
Sched:Sched 5  
Sched:Sched 6  
00  
00  
Unassigned  
21  
OLI #  
OLI as calld #  
Set lock  
None  
Y
None  
N
Allow last no  
Allow saved no  
Allow link  
Public  
None  
To prime  
21  
Y
Capabilities  
Y
Restrn service  
Line/set rstrns  
Show line:_  
Fwd no answer  
Fwd to  
PrimeSet  
Auto privacy  
Aux. ringer  
None  
4
Y
None  
None  
None  
None  
None  
None  
None  
Normal  
Night  
Sched:Night  
Service  
Forward delay  
N
Off  
Fwd on busy  
Fwd to  
Name  
Line001  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Sched:Evening  
Sched:Lunch  
Sched:Sched 4  
Sched:Sched 5  
Sched:Sched 6  
None  
N
DND on Busy  
Handsfree  
HF answerback  
Pickup grp  
Page zone  
Paging  
D-Dial  
Priority Call  
Hotline  
Restrictions  
None  
Y
Restrn filters  
Show filter:  
Restrn 00  
None  
1
Telco features  
No restrictions  
Restrn 01:0  
Deny  
Routing service  
Y
CLASS assignmnt  
Show line:_  
Set1  
N
0
N
N
Caller ID set  
Call log set  
Extl VMsg set  
1st Display  
Called ID  
Routes  
Show route:_  
No overrides  
None  
Line restrns  
Normal  
Night  
N
(if Hotline=Extrnl and number  
Rte 000  
DialOut  
Use  
03  
21  
22  
23  
00  
00  
00  
Name  
N
specified)  
Use prime line  
No numbr  
Pool A  
Aux. ringer  
Allow redirect  
Redirect ring  
ATA settings  
ATA ans timer  
(if DN=I-ATA  
ATA use  
N
N
Y
Evening  
Lunch  
Log space  
Dest codes  
Show DstCode:_  
Normal  
Log  
0
Pool  
250  
Sched 4  
Sched 5  
Sched 6  
000  
All  
AbsorbLength  
Night  
Evening  
7
3
None  
None  
Off Site  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
 
Page 4  
(if number is programmed)  
None  
None  
None  
None  
Lunch  
Line assignment  
Show line:_  
Lnnn:  
Mode:  
Hunt delay:  
If busy:  
DISA DN  
None  
Use prime line  
Y
Sched 4  
Sched 5  
Sched 6  
Auto Attendant  
Display digits  
Unassigned  
Broadcast  
4
(if Display digits=N)  
Auto Attend  
Attd Set  
Language  
First  
Off  
21  
Name  
Bypass restr’n  
Sys Spd Dial 01  
N
Sched:Night  
Service  
Off  
N
BusyTone  
60  
Overflow  
Timeout:  
Overflow:  
English  
NONE  
<DN>or  
Sched:Evening  
Sched:Lunch  
Sched:Sched 4  
Sched:Sched 5  
Sched:Sched 6  
Second  
Passwords  
<hunt group DN>  
System Answer  
After  
Name:  
<7 characters>  
3 rings  
Off  
COS pswds  
Change DNs  
Fax Switch  
CCR  
After  
Show pswd #:_  
Pswd 00  
Old DN:_ Max. 7 digits  
New DN:_ Max. 7 digits  
3 rings  
NO  
None  
None  
None  
None  
Common settings  
CCR lines  
User flt  
Featr settings  
Line flt  
L001 Answer  
CCR groups  
Control sets  
For lines  
Remote pkg  
Backgrnd music  
On hold  
Receiver volume  
N
Show group:_  
CCR group 1  
Show DN:_  
21  
Show line:_  
L001  
Call log pswds  
Tones  
21  
21  
For sets  
Show set:_  
Log pswd  
Use sys volume  
None  
Unassgnd  
Off  
Show set:_  
21  
Schedule names  
Sched 1  
Camp timeout  
Park timeout  
Park mode  
Trnsfr callbk  
DRT to prime  
DRT delay  
Held reminder  
(if Held reminder=Y)  
Remind delay  
Directd pickup  
Page tone  
Page Timeout  
Daylight time  
AutoTime&Date  
Call log space  
Reset all logs?  
45  
Fax Switch  
Progrming pswds  
45  
Fax DN  
None  
Lowest  
Installer  
(CONFIG)  
SysCoord+  
(SCPLUS)  
Sys coord  
(ADMIN)  
266344  
727587  
23646  
Night  
Evening  
Lunch  
4
Y
4
Sched 2  
Remote access  
Sched 3  
Remote access pkgs  
Show pkg:_  
Sched 4  
Sched 4  
Sched 5  
Sched 6  
Sched 5  
N
LinePool access  
Pool A  
Sched 6  
( ) N  
N
Schedule times  
Monday  
Basic  
(BASIC)  
22742  
60  
Y
Remote page  
Remote admin  
Remote monitor  
Rem line access  
Show line:_  
N
Sched:Night  
Start time  
Stop time  
Sched:Evening  
Start time  
Stop time  
Sched:Lunch  
Start time  
Stop time  
Sched:Sched 4  
Start time  
Stop time  
Sched:Sched 5  
Start time  
Stop time  
Sched:Sched 6  
Start time  
Stop time  
Tuesday  
Y
IRAD pswd  
Hospitality  
< Sys ID>  
N
23:00  
07:00  
180  
Y
Y
Rem pkg 00  
L001  
IRAD  
Desk pswd  
(HOSP)  
4677  
17:00  
23:00  
Answer line  
None  
Cond pswd  
None  
Space/log  
After  
5 rings  
12:00  
13:00  
Host delay  
Link Time  
AlarmSet  
Set relocation  
Anskey:  
1000  
600  
21  
Rec’d # length  
DN length  
2
2
Time&Date  
00:00  
00:00  
Hour  
01  
00  
99  
01  
01  
N
Basic  
Nat’nl length  
Release reasons  
10  
Minutes  
Year  
00:00  
00:00  
Direct-dial  
D-Dial 1  
Intrnl#  
Intrnl  
21  
Text:  
None  
Fast  
Month  
Day  
00:00  
00:00  
Intrnl modem  
CAP assignment  
(if remote administration is enabled)  
CAP1  
None  
Wednesday  
Alarm reporting  
Auto-report  
Thursday  
Access codes  
System prgrming  
Hunt groups  
Friday  
Off  
None  
None  
None  
15  
Line pool codes  
Line pool A  
Saturday  
Phone #1  
Phone #2  
Use line  
Retry time  
Num. retries  
None  
None  
None  
Sunday  
Line pool B  
Show group:_  
HGnn:<DN>  
Member DNs  
M001:  
Line pool C  
Sys speed dial  
Park prefix  
Extrnl code  
Direct-dial  
Auto DN  
1
9
5
Speed dial #:_  
Appr&Ring  
0
01:  
No number  
None  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 5  
Hospitality  
Room/desk info  
Loop  
Type  
201  
T
(if Loop type is T)  
Show set:___  
Room #: _  
Adm pwd req’d:  
Call restrns  
Vacant:  
001-002  
Lines  
No SPIDs assigned  
Y
(if SPIDs are assigned)  
SPID1  
00  
1
# of B-channls  
Network DNs  
Use flt:__  
Basic:  
Mid:  
00  
00  
00  
No DNs assigned  
(if Loop type is S)  
Full:  
Sampling  
Fixed  
Service time  
Hour:  
DNs on Loop 201  
00  
00  
Assign DNs  
Loop DN  
Minutes:  
None  
Alarm  
(if DNs are assigned)  
3
4
Attn attempts:  
Retry intrvl:  
Attn duration:  
Time format  
Both  
Call type  
Card type  
BRI-U4  
15  
(if Loop type is NT)  
12hr  
D-packet servce  
N
D-packet servc  
Lp201  
None  
Telco features  
TEIs  
No TEIs on loop  
VMsg ctr tel#s  
SuprsBit  
ONN blk  
(if Loop type is LT)  
VMsg center 1  
Tel#  
DNs on Loop 201  
No number  
Assign DNs  
Loop DN  
VMsg center 2  
VMsg center 3  
VMsg center 4  
VMsg center 5  
None  
(if system uses standard feature cartridge)  
Cd2-KSU  
Loop  
ONN blocking  
Maintenance  
Analog VSC  
Tone  
Pulse  
BRI VSC  
Code  
None  
None  
System version  
Port/DN status  
Module status  
Sys test log  
None  
Software Keys  
SysID (8 digits)  
Sys admin log  
Provisioning  
Tests  
Password Keys  
Key 1 (8 digits)  
Key 2 (8 digits)  
Key 3 (8 digits)  
Remote montr  
Off  
Hardware  
Cd1-KSU  
Usage Metrics  
Loop  
Hunt groups  
Call by call  
Card type  
Lines  
Discon timer  
(If BRI card)  
Card type  
Loops  
Loop  
001-004  
460  
BRI-ST  
201-204  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 6  
Defaults are shown in bold and underlined  
Programming overview (Profiles 2 and 3)  
Name  
221  
Remote restrns  
Normal  
04  
Profile  
PROF 1  
Lines  
User prefernces  
Night  
31  
32  
33  
00  
00  
00  
Evening  
Lunch  
Show line:_  
Model  
M7208  
Button prgrming  
User speed dial  
Call log opt’ns  
Trunk/Line data  
Dialpad  
Startup  
Q, Z:0  
Sched 4  
Sched 5  
Sched 6  
(If Loopstart)  
Trunk Type  
Line type  
Dial mode  
PrimeSet  
Auto privacy  
Trunk mode  
(if Trunk mode=Super)  
Ans mode  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Full AutoHold  
Loop  
Public  
Tone  
21  
No one answered  
Telco features  
Dialing opt’ns  
Standard dial  
VMsg center  
1
Template  
Start DN  
Square  
21  
Language  
Display cntrst  
Ring type  
English  
Y
4
1
Services  
Unspr  
Restrictions  
Ringing service  
Manual  
Terminals&Sets  
Restrn filters  
Show filter:_  
Restrn 00  
Ringing groups  
Show group:_  
Y
Show set:_  
N
N
Ring grp 01  
Show set:_  
21  
Line access  
No restrictions  
Restrn 01:0  
Deny  
LossPkg  
(If BRI-2 or BRI-ST)  
MediumCO  
Line assignment  
Show line:_  
Assigned  
0
Sched: Night  
Service  
Trunk Type  
Line type  
PrimeSet  
Auto privacy  
Ans mode  
BRI-ST  
Public  
21  
No overrides  
Appr&Ring  
L001  
Off  
Y
Set restrns  
Filters  
LinePool access  
Line Pool A  
Trunk answer  
ExtraDial  
N
N
N
21  
Y
02  
11  
Normal  
Night  
Line Pool B  
Line settings  
Show line:_  
Manual  
Line Pool C  
12  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Full AutoHold  
(If Target Line 049-074)  
Target line  
Line type  
Rec’d #  
If busy  
Prime line  
Intercom keys  
Answer DNs  
Show set:_  
None  
2
01  
N
Ring grp  
Aux. ringer  
13  
Y
N
N
00  
Sched:Evening  
Sched:Lunch  
Sched:Sched 4  
Sched:Sched 5  
Sched:Sched 6  
00  
00  
Unassigned  
None  
21  
OLI #  
Set lock  
None  
Y
Allow last no  
Allow saved no  
Allow link  
Public  
None  
To prime  
21  
Capabilities  
Y
Y
Fwd no answer  
Fwd to  
Restrn service  
Line/set rstrns  
Show line:_  
None  
4
PrimeSet  
Auto privacy  
Aux. ringer  
Forward delay  
Y
None  
None  
None  
None  
None  
None  
None  
Normal  
Night  
Sched:Night  
Service  
Fwd on busy  
Fwd to  
N
Off  
None  
N
Name  
Line001  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Sched:Evening  
Sched:Lunch  
Sched:Sched 4  
Sched:Sched 5  
Sched:Sched 6  
DND on Busy  
Handsfree  
HF answerback  
Pickup grp  
Page zone  
Paging  
D-Dial  
Priority Call  
Hotline  
None  
Y
Restrictions  
Restrn filters  
Show filter:  
Restrn 00  
None  
1
Telco features  
Y
No restrictions  
Restrn 01:0  
Deny  
Routing service  
Set1  
N
CLASS assignmnt  
Show line:_  
0
None  
N
N
Caller ID set  
Call log set  
Extl VMsg set  
1st Display  
Called ID  
Routes  
Show route:_  
No overrides  
(if Hotline=Extrnl and number  
Line restrns  
Normal  
Night  
specified)  
Use prime line  
N
Rte 000  
DialOut  
Use  
03  
21  
22  
23  
00  
00  
00  
Name  
N
Aux. ringer  
Allow redirect  
Redirect ring  
ATA settings  
ATA ans timer  
(if DN=I-ATA  
ATA use  
N
N
Y
No numbr  
Pool A  
Evening  
Lunch  
Log space  
Dest codes  
Show DstCode:_  
Normal  
Log  
0
Pool  
250  
Sched 4  
Sched 5  
Sched 6  
000  
All  
7
3
AbsorbLength  
Night  
Evening  
None  
None  
Off Site  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 7  
(if number is programmed)  
None  
None  
None  
None  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Sched:Night  
Service  
Line assignment  
Show line:_  
Lnnn:  
Mode:  
Hunt delay:  
If busy:  
DISA DN  
None  
Use prime line  
Y
Auto Attendant  
Display digits  
Unassigned  
Broadcast  
4
(if Display digits=N)  
Auto Attend  
Attd Set  
Language  
First  
Off  
21  
Name  
Bypass restr’n  
Sys Spd Dial 01  
N
Off  
N
BusyTone  
60  
Overflow  
Timeout:  
Overflow:  
English  
NONE  
<DN>or  
Sched:Evening  
Sched:Lunch  
Sched:Sched 4  
Sched:Sched 5  
Sched:Sched 6  
Second  
Passwords  
<hunt group DN>  
System Answer  
After  
Name:  
<7 characters>  
3 rings  
Off  
COS pswds  
Change DNs  
Fax Switch  
CCR  
After  
Show pswd #:_  
Pswd 00  
Old DN:_ Max. 7 digits  
New DN:_ Max. 7 digits  
3 rings  
NO  
None  
None  
None  
None  
Common settings  
CCR lines  
User flt  
Featr settings  
Line flt  
L001 Answer  
CCR groups  
Control sets  
For lines  
Remote pkg  
Backgrnd music  
On hold  
Receiver volume  
N
Show group:_  
CCR group 1  
Show DN:_  
21  
Show line:_  
L001  
Call log pswds  
Tones  
21  
21  
For sets  
Show set:_  
Log pswd  
Use sys volume  
None  
Unassgnd  
Off  
Show set:_  
21  
Schedule names  
Sched 1  
Camp timeout  
Park timeout  
Park mode  
Trnsfr callbk  
DRT to prime  
DRT delay  
Held reminder  
(if Held reminder=Y)  
Remind delay  
Directd pickup  
Page tone  
Page Timeout  
Daylight time  
AutoTime&Date  
Call log space  
Reset all logs?  
45  
Fax Switch  
Progrming pswds  
45  
Fax DN  
None  
Lowest  
Installer  
(CONFIG)  
SysCoord+  
(SCPLUS)  
Sys coord  
(ADMIN)  
266344  
727587  
23646  
Night  
Evening  
Lunch  
4
Y
4
Sched 2  
Remote access  
Sched 3  
Remote access pkgs  
Show pkg:_  
Sched 4  
Sched 4  
Sched 5  
Sched 6  
Sched 5  
N
LinePool access  
Pool A  
Sched 6  
( ) N  
N
Schedule times  
Monday  
Basic  
(BASIC)  
22742  
60  
Y
Remote page  
Remote admin  
Remote monitor  
Rem line access  
Show line:_  
N
Sched:Night  
Start time  
Stop time  
Sched:Evening  
Start time  
Stop time  
Sched:Lunch  
Start time  
Stop time  
Sched:Sched 4  
Start time  
Stop time  
Sched:Sched 5  
Start time  
Stop time  
Sched:Sched 6  
Start time  
Stop time  
Tuesday  
Y
IRAD pswd  
Hospitality  
< Sys ID>  
N
23:00  
07:00  
180  
Y
Y
Rem pkg 00  
L001  
IRAD  
Desk pswd  
(HOSP)  
4677  
17:00  
23:00  
Answer line  
None  
Cond pswd  
None  
Space/log  
After  
5 rings  
12:00  
13:00  
Host delay  
Link Time  
AlarmSet  
Set relocation  
Anskey:  
1000  
600  
21  
Rec’d # length  
DN length  
2
2
Time&Date  
00:00  
00:00  
Hour  
01  
00  
99  
01  
01  
N
Basic  
Nat’nl length  
Mk / Br  
10  
Minutes  
Year  
00:00  
00:00  
Direct-dial  
40/60  
D-Dial 1  
Intrnl#  
Intrnl  
21  
Release reasons  
Month  
Day  
00:00  
00:00  
CAP assignment  
Text:  
None  
Fast  
Intrnl modem  
CAP1  
None  
Wednesday  
Thursday  
Access codes  
(if remote administration is enabled)  
System prgrming  
Hunt groups  
Friday  
Alarm reporting  
Auto-report  
Line pool codes  
Line pool A  
Saturday  
None  
None  
None  
Sunday  
Off  
None  
None  
None  
15  
Line pool B  
Phone #1  
Phone #2  
Use line  
Retry time  
Num. retries  
Show group:_  
HGnn:<DN>  
Member DNs  
M001:  
Line pool C  
Sys speed dial  
Park prefix  
Extrnl code  
Direct-dial  
Auto DN  
1
9
Speed dial #:_  
Appr&Ring  
0
01:  
No number  
5
None  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 8  
Hospitality  
Room/desk info  
Loop  
Type  
201  
T
(if Loop type is T)  
Show set:___  
Room #: _  
Adm pwd req’d:  
Call restrns  
Vacant:  
001-002  
Lines  
ONN blk  
SuprsBit  
Y
Ovlap recving:  
Public digit length:  
(if Loop type is S)  
Sampling  
N
8
00  
Use flt:__  
Basic:  
Mid:  
Fixed  
None  
00  
00  
00  
Assign DNs  
Loop DN  
Full:  
(if system uses standard feature cartridge)  
Service time  
Hour:  
Cd2-KSU  
Loop  
00  
00  
Minutes:  
Alarm  
Maintenance  
3
4
Attn attempts:  
Retry intrvl:  
Attn duration:  
Time format  
System version  
Port/DN status  
Module status  
Sys test log  
15  
12hr  
Telco features  
VMsg ctr tel#s  
Sys admin log  
Provisioning  
Tests  
VMsg center 1  
Tel#  
No number  
VMsg center 2  
VMsg center 3  
VMsg center 4  
VMsg center 5  
Remote montr  
Off  
ONN blocking  
Usage Metrics  
Analog VSC  
Tone  
Pulse  
BRI VSC  
Code  
None  
None  
Hunt groups  
Call by call  
None  
Software Keys  
SysID (8 digits)  
Password Keys  
Key 1 (8 digits)  
Key 2 (8 digits)  
Key 3 (8 digits)  
Hardware  
Cd1-KSU  
Loop  
Card type  
Lines  
Discon timer  
(If BRI-2 or BRI-ST card)  
Card type  
Loops  
Loop  
001-004  
460  
BRI-ST  
201-204  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 9  
Installed telephones and other devices  
Name or location  
Telephone Model  
BLF  
CAP  
ATA  
Port No. Default DN  
New DN †  
(max. 7 digits)  
(max. 7 digits)  
Extension numbers are changed at System prgrming: Change DNs  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
   
Page 10  
Photocopy pages before using.  
Profile  
Profile  
PROF 1  
Q, Z:0  
PROF 2  
PROF 3  
PROF 4  
Dialpad  
Dialpad  
Q, Z:7,9  
Startup  
Template  
Start DN  
Square  
21  
Hybrid  
PBX  
__________________________  
Terminals&Sets  
Line Access  
(Terminals&Sets: Line access)  
Sets: (max. 7 digits)  
Line assignment  
001  
002  
A R  
A R  
001  
002  
A R  
A R  
001  
002  
A R  
A R  
001  
002  
A R  
A R  
001  
002  
A R  
A R  
001  
002  
A R  
A R  
001  
002  
A R  
A R  
List 3 digit line number and  
circle line assignment.  
AR = Appear&Ring  
A = Appear only  
R = Ring only  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
_ _ _ A R  
blank = Unassigned  
Line pool access  
Prime Line  
A
B C  
A
B C  
A
B C  
A
B C  
A
B C  
A
B C  
A
B C  
None  
None  
None  
None  
None  
None  
None  
I/C  
I/C  
I/C  
I/C  
I/C  
I/C  
I/C  
Line # __  
Pool ____  
Line # __  
Pool ____  
Line # __  
Pool ____  
Line # __  
Pool ____  
Line # __  
Pool ____  
Line # __  
Pool ____  
Line # __  
Pool ____  
Intercom Keys  
0
4
8
1
5
2
6
3
7
0
4
8
1
5
2
6
3
7
0
4
8
1
5
2
6
3
7
0
4
8
1
5
2
6
3
7
0
4
8
1
5
2
6
3
7
0
4
8
1
5
2
6
3
7
0
4
8
1
5
2
6
3
7
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
         
Page 11  
Answer DNs  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
A R  
Enter DNs of sets to be  
answered and circle Answer  
DN type.  
AR = Appear&Ring  
A = Appear only  
blank = Unassigned  
OLI#  
None  
None  
None  
None  
None  
None  
None  
________  
________  
________  
________  
________  
________  
________  
OLI as calld #*  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
* Profile 1and 4 only  
Capabilities  
(Terminals&Sets: Capabilities)  
Sets: (max. 7 digits)  
Fwd no answer  
None  
None  
None  
None  
None  
None  
None  
to:  
to:  
to:  
to:  
to:  
to:  
to:  
Fwd delay  
2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10 2 3 4 6 10  
Fwd on busy  
None  
None  
None  
None  
None  
None  
None  
to:  
to:  
to:  
to:  
to:  
to:  
to:  
DND on Busy  
Handsfree  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Auto  
Std  
Auto  
Std  
Auto  
Std  
Auto  
Std  
Auto  
Std  
Auto  
Std  
Auto  
Std  
None  
None  
None  
None  
None  
None  
None  
HF answerback  
Pickup grp  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
1 2 3 4  
1 2 3 4  
1 2 3 4  
1 2 3 4  
1 2 3 4  
1 2 3 4  
1 2 3 4  
None  
None  
None  
None  
None  
None  
None  
Page zone  
Paging  
1 2 3 None 1 2 3 None 1 2 3 None 1 2 3 None 1 2 3 None 1 2 3 None 1 2 3 None  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
D-Dial  
Set1  
Set1  
Set1  
Set1  
Set1  
Set1  
Set1  
Set __  
None  
Set __  
None  
Set __  
None  
Set __  
None  
Set __  
None  
Set __  
None  
Set __  
None  
Priority call  
Hotline  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
None  
None  
None  
None  
None  
None  
None  
Intrnl# ___  
Extrnl# ___  
Intrnl# ___  
Extrnl# ___  
Intrnl# ___  
Extrnl# ___  
Intrnl# ___  
Extrnl# ___  
Intrnl# ___  
Extrnl# ___  
Intrnl# ___  
Extrnl# ___  
Intrnl# ___  
Extrnl# ___  
Use Hotline on:  
Use prime  
line  
Use prime  
line  
Use prime  
line  
Use prime  
line  
Use prime  
line  
Use prime  
line  
Use prime  
line  
(If Hotline = Extrnl)  
Use line #: __  
Pool code:  
Use line #: __  
Pool code:  
Use line #: __  
Pool code:  
Use line #: __  
Pool code:  
Use line #: __  
Pool code:  
Use line #: __  
Pool code:  
Use line #: __  
Pool code:  
Use routing tabl:  
Use routing tabl: Use routing tabl: Use routing tabl: Use routing tabl: Use routing tabl: Use routing tabl:  
Aux. ringer  
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Allow redirect  
Redirect ring  
ATA settings  
(if DN=ATA)  
ATA ans timer  
3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10  
3 5 7 10  
3 5 7 10  
ATA use  
On site  
On site  
On site  
On site  
On site  
On site  
On site  
Off site  
Off site  
Off site  
Off site  
Off site  
Off site  
Off site  
Use ringback  
Use ringback  
Use ringback  
Use ringback  
Use ringback  
Use ringback  
Use ringback  
(if DN=IATA)  
ATA ans timer  
3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10 3 5 7 10  
3 5 7 10  
3 5 7 10  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
 
Page 12  
Name  
(Terminals&Sets: Name)  
Name (max. 7 char.)  
21  
_________  
21  
21  
21  
21  
21  
21  
_________  
_________  
_________  
_________  
_________  
_________  
User prefernces  
(Terminals&Sets: User preferences)  
Model  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
M7324 CAP  
M7310  
M7208  
M7100  
ATA  
Intl set  
Intl set  
Intl set  
Intl set  
Intl set  
Intl set  
Intl set  
Button prgrming  
Record button programming starting on page 13.  
Record user speed dial numbers starting on page 16.  
User speed dial  
(71-94)  
Call log opt’ns  
Log all calls... Log all calls... Log all calls... Log all calls... Log all calls... Log all calls... Log all calls...  
No autolog-  
ging...  
No autolog-  
ging...  
No autolog-  
ging...  
No autolog-  
ging...  
No autolog-  
ging...  
No autolog-  
ging...  
No autolog-  
ging...  
No one  
No one  
No one  
No one  
No one  
No one  
No one  
answerd...  
answerd...  
answerd...  
answerd...  
answerd...  
answerd...  
answerd...  
Unanswerdby Unanswerdby Unanswerdby Unanswerdby Unanswerdby Unanswerdby Unanswerdby  
me...  
me...  
me...  
me...  
me...  
me...  
me...  
Dialing opt’ns  
Standard  
dial  
Standard  
dial  
Standard  
dial  
Standard  
dial  
Standard  
dial  
Standard  
dial  
Standard  
dial  
Pre-dial  
Pre-dial  
Pre-dial  
Pre-dial  
Pre-dial  
Pre-dial  
Pre-dial  
Automatic dial Automatic dial Automatic dial Automatic dial Automatic dial Automatic dial Automatic dial  
(Profiles 1, 3 and 4)  
Language  
Langue  
English  
Français  
Español  
English  
Français  
Español  
English  
Français  
Español  
English  
Français  
Español  
English  
Français  
Español  
English  
Français  
Español  
English  
Français  
Español  
Idioma  
(Profile 2 only)  
Language  
Langue  
English  
Français  
Español  
Turkish  
English  
Français  
Español  
Turkish  
English  
Français  
Español  
Turkish  
English  
Français  
Español  
Turkish  
English  
Français  
Español  
Turkish  
English  
Français  
Español  
Turkish  
English  
Français  
Español  
Turkish  
Idioma  
Display cntrst  
Ring type  
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
5 6 7 8 9 5 6 7 8 9 5 6 7 8 9 5 6 7 8 9 5 6 7 8 9 5 6 7 8 9 5 6 7 8 9  
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
   
Page 13  
Button prgrming  
M7100  
Prgrming  
Default  
B01  
Last No.  
M7208  
B01  
B02  
B03  
B04  
B05  
B06  
B07  
B08  
Prgrming  
Default  
Grp Pickup  
Transfer  
Last No.  
Page Genrl  
Conf/Trans  
Speed Dial  
Intercom  
Intercom  
M7324  
B01  
B02  
B03  
B04  
B05  
B06  
B07  
B08  
B09  
B10  
B11  
B12  
B13  
B14  
B15  
B16  
B17  
B18  
B19  
B20  
B21  
B22  
B23  
B24  
Prgrming  
Default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
Call Fwd  
Speed Dial  
Last No.  
Saved No.  
Conf/Trans  
Transfer  
DND  
Grp Pickup  
Voice Call  
Page Grnrl  
Intercom  
Intercom  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
   
Page 14  
M7310  
B01  
Prgrming  
Default  
DND  
B02  
Transfer  
Call Fwd  
Grp Pickup  
Page Grnr  
Conf/Trans  
Last No.  
Voice Call  
Intercom  
Intercom  
Set 21  
B03  
B04  
B05  
B06  
B07  
B08  
B09  
B10  
B11  
B12 (shift)  
B13  
Set 33  
Set 22  
B14 (shift)  
B15  
Set 34  
Set 23  
B16 (shift)  
B17  
Set 35  
Set 24  
B18 (shift)  
B19  
Set 36  
Set 25  
B20 (shift)  
B21  
Set 37  
Set 26  
B22 (shift)  
B23  
Set 38  
Set 27  
B24 (shift)  
B25  
Set 39  
Set 28  
B26 (shift)  
B27  
Set 240  
Set 29  
B28 (shift)  
B29  
Set 241  
Set 30  
B30 (shift)  
B31  
Set 242  
Set 31  
B32 (shift)  
B33  
Set 243  
Set 32  
B34 (shift)  
Set244  
CAP  
B01  
B02  
B03  
B04  
B05  
B06  
B07  
B08  
Prgrming  
Default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 15  
B09  
B10  
B11  
B12  
B13  
B14  
B15  
B16  
B17  
B18  
B19  
B20  
B21  
B22  
B23  
B24  
B25  
B26  
B27  
B28  
B29  
B30  
B31  
B32  
B33  
B34  
B35  
B36  
B37  
B38  
B39  
B040  
B041  
B042  
B043  
B044  
B045  
B046  
B047  
B048  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
No default  
Intl set  
B01  
Prgrming  
Default  
Last No.  
Call Fwd  
Transfer  
Conf  
B02  
B03  
B04  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 16  
User speed dial  
(Terminals&Sets: User speed dial)  
Spd#  
(71-94)  
Speed dial number (max. 24 digits)  
Use prime line  
Use line: ____  
Pool code ____  
Use routing tabl  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
   
Page 17  
Restrictions  
(Terminals&Sets: Restrictions)  
Restrn filters  
(Terminals&Sets: Restrictions; Restrn filters)  
Restrn flt  
Restrn  
Default Overrides  
(Number)  
(Value)  
(Number)  
(Value)  
00  
01  
No restrictions  
(only filter that cannot be changed)  
01  
02  
0
1
001  
002  
003  
001  
1800  
1877  
1888  
911  
03  
04  
05  
06  
07  
911  
411  
976  
1976  
1•••976  
08  
09  
1900  
1•••900  
10  
5551212  
02-99  
No restrictions  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
   
Page 18  
Restrn filters (continued)  
(Terminals&Sets: Restrictions; Restrn filters))  
Restrn flt  
Restrn nn  
Override  
(01-99)  
# (2digits)  
Restriction (max. 15 digits)  
# (3 digits)  
Overrides (max. 16 digits)  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 19  
Set restrns  
(Terminals&Sets; Restrictions; Set restrns)  
Sets: (max. 7 digits)  
names (max. 7 char.)  
Filters  
Normal  
Night  
02 02, _______ 02, _______ 02, _______ 02, _______ 02, _______ 02, _______ 02, _______  
11 11, _______ 11, _______ 11, _______ 11, _______ 11, _______ 11, _______ 11, _______  
12 12, _______ 12, _______ 12, _______ 12, _______ 12, _______ 12, _______ 12, _______  
13 13, _______ 13, _______ 13, _______ 13, _______ 13, _______ 13, _______ 13, _______  
00 00, _______ 00, _______ 00, _______ 00, _______ 00, _______ 00, _______ 00, _______  
00 00, _______ 00, _______ 00, _______ 00, _______ 00, _______ 00, _______ 00, _______  
00 00, _______ 00, _______ 00, _______ 00, _______ 00, _______ 00, _______ 00, _______  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Set lock  
None  
Partial  
Full  
None  
Partial  
Full  
None  
Partial  
Full  
None  
Partial  
Full  
None  
Partial  
Full  
None  
Partial  
Full  
None  
Partial  
Full  
Allow last no  
Allow saved no  
Allow link  
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Y
Y
Y
N
N
N
Line/set restrns  
(Terminals&Sets; Restrictions; Line/set restrns)  
Normal  
Night  
None  
None  
__________ __________ __________ __________ __________ __________ __________  
__________ __________ __________ __________ __________ __________ __________  
__________ __________ __________ __________ __________ __________ __________  
__________ __________ __________ __________ __________ __________ __________  
__________ __________ __________ __________ __________ __________ __________  
__________ __________ __________ __________ __________ __________ __________  
__________ __________ __________ __________ __________ __________ __________  
Evening None  
Lunch None  
Sched 4 None  
Sched 5 None  
Sched 6 None  
Telco features  
(Terminals&Sets:Telco features)  
CLASS assignmnt  
(Terminals&Sets;Telco features; CLASS assignmnt)  
Sets:(max. 7 digits)  
names:(max. 7 char.)  
Caller ID set  
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Call log set  
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Extl VMsg set  
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
Line#:  
Y
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
       
Page 20  
1stDisplay  
(Terminals&Sets;Telco features;1st Display)  
Name  
Numbr  
Line  
Name  
Numbr  
Line  
Name  
Numbr  
Line  
Name  
Numbr  
Line  
Name  
Numbr  
Line  
Name  
Numbr  
Line  
Name  
Numbr  
Line  
Called ID  
(Terminals&Sets;Telco features;Called ID)  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
Log space  
(Terminals&Sets;Telco features; Log space)  
Log space  
Log:  
Log:  
Log:  
Log:  
Log:  
Log:  
Log:  
(Log:0 Pool: 250)  
Pool:  
Pool:  
Pool:  
Pool:  
Pool:  
Pool:  
Pool:  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
     
Page 21  
Lines  
Trunk/Line Data  
Record settings for lines (Loop: 001-004 and 025-028) (BRI: 001-008 and 025-032) (Target lines 049-074)  
If Loop, BRI-2, BRI-ST, BRI-U2 or BRI-U4  
(BRI-2 for Profiles 2 and 3 only)(BRI-U2 and BRI-U4 for Profiles 1 and 4 only)  
Line no.(3 digits)  
Telephone number  
Trunk type  
001  
002  
003  
004  
Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
Line type  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
(if card=Loop)  
Tone  
Tone  
Tone  
Tone  
Dial mode  
PrimeSet  
21  
21  
21  
21  
Auto privacy  
Y
N
Y
N
Y
N
Y
N
(if card=Loop)  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Trunk mode  
(if Trunk mode=Super)  
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Ans mode  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Full AutoHold  
(if card=Loop)  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
LossPkg  
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
001  
002  
003  
004  
Restrictions  
Line restrns (Tables for recording Restriction filters are provided under Terminals&Sets)  
Normal  
Night  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
         
Page 22  
Remote restrns  
Normal  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Remote restrns (Remote access packages are programmed under System prgrming: Remote access: Rem access pkgs  
Remote pkg  
00  
00  
00  
00  
Telco features  
VMsg center  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
Line no.(3 digits)  
Telephone number  
Trunk type  
005  
006  
007  
008  
Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
Line type  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
(if card=Loop)  
Tone  
Tone  
Tone  
Tone  
Dial mode  
PrimeSet  
21  
21  
21  
21  
Auto privacy  
Y
N
Y
N
Y
N
Y
N
(if card=Loop)  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Trunk mode  
(if Trunk mode=Super)  
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Ans mode  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Full AutoHold  
(if card=Loop)  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
LossPkg  
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
005  
006  
007  
008  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 23  
Restrictions  
Line restrns (Tables for recording Restriction filters are provided under Terminals&Sets)  
Normal  
Night  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Remote restrns  
Normal  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Remote restrns (Remote access packages are programmed under System prgrming: Remote access: Rem access pkgs  
Remote pkg  
00  
00  
00  
00  
Telco features  
VMsg center  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
Line no.(3 digits)  
Telephone number  
Trunk type  
025  
026  
027  
028  
Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
Line type  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
(if card=Loop)  
Tone  
Tone  
Tone  
Tone  
Dial mode  
PrimeSet  
21  
21  
21  
21  
Auto privacy  
Y
N
Y
N
Y
N
Y
N
(if card=Loop)  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Trunk mode  
(if Trunk mode=Super)  
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Ans mode  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Full AutoHold  
(if card=Loop)  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
LossPkg  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 24  
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
025  
026  
027  
028  
Restrictions  
Line restrns (Tables for recording Restriction filters are provided under Terminals&Sets)  
Normal  
Night  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Remote restrns  
Normal  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Remote restrns (Remote access packages are programmed under System prgrming: Remote access: Rem access pkgs  
Remote pkg  
00  
00  
00  
00  
Telco features  
VMsg center  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 25  
Line no.(3 digits)  
Telephone number  
Trunk type  
029  
030  
031  
032  
Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST Loop BRI-2 BRI-ST  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
BRI-U2  
Public  
BRI-U4  
Pool:  
Line type  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
Private to:  
Pulse  
(if card=Loop)  
Tone  
Tone  
Tone  
Tone  
Dial mode  
PrimeSet  
21  
21  
21  
21  
Auto privacy  
Y
N
Y
N
Y
N
Y
N
(if card=Loop)  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Unspr  
Super  
Trunk mode  
(if Trunk mode=Super)  
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Manual  
Y
Auto  
N
Ans mode  
(if Ans mode=Auto)  
Ans with DISA  
Aux. ringer  
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Y
Y
N
N
Full AutoHold  
(if card=Loop)  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
ShortCO MediumCO  
LongCO ShortPBX  
LongPBX  
LossPkg  
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
029  
030  
031  
032  
Restrictions  
Line restrns (Tables for recording Restriction filters are provided under Terminals&Sets)  
Normal  
Night  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
03  
21  
22  
23  
00  
00  
00  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Remote restrns  
Normal  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
04  
31  
32  
33  
00  
00  
00  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 26  
Remote restrns (Remote access packages are programmed under System prgrming: Remote access: Rem access pkgs  
Remote pkg  
00  
00  
00  
00  
Telco features  
VMsg center  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
1 2 3 4 5 N  
If Target lines  
Record settings for lines 049 to 074.  
Line no.(3 digits)  
Telephone number  
Line type  
049  
050  
051  
052  
Public Private to:  
Public Private to:  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
N
N
Y
N
Y
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
Telephone number  
Line type  
053  
054  
055  
056  
Public Private to:  
Public Private to:  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
N
N
Y
N
Y
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 27  
Line no.(3 digits)  
Telephone number  
Line type  
057  
058  
059  
060  
Public Private to:  
Public Private to:  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
N
N
Y
N
Y
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
Telephone number  
Line type  
061  
062  
063  
064  
Public Private to:  
Public Private to:  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
N
N
Y
N
Y
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
Telephone number  
Line type  
065  
066  
067  
068  
Public Private to:  
Public Private to:  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
N
N
Y
N
Y
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 28  
Line no.(3 digits)  
Telephone number  
Line type  
069  
070  
071  
072  
Public Private to:  
Public Private to:  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
N
N
Y
N
Y
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
Line no.(3 digits)  
Telephone number  
Line type  
073  
074  
Public Private to:  
Public Private to:  
Rec’d #  
None __ __ __ __ __  
None __ __ __ __ __  
If busy  
To prime  
BusyTone  
To prime  
BusyTone  
Prime set  
21  
Y
21  
Y
Auto privacy  
Aux. ringer  
N
N
Y
N
Y
N
Name  
Name (max. 7 char.)  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 29  
Services  
Ringing service  
(Services: Ringing service) For more than 3 ring groups, photocopy this page BEFORE using.  
Ring group 01  
Ring group 02  
Ring group 03  
Schedule  
21  
21  
21  
Schedule 1  
Schedule 2  
Schedule 3  
Schedule 4  
Schedule 5  
Schedule 6  
(change names under  
Sevices: Common  
settings)  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Service  
Off Auto  
Off Auto  
Off Auto  
Off Auto  
Off Auto  
Off Auto  
Manual  
Manual  
Manual  
Manual  
Manual  
Manual  
Trunk answer  
ExtraDial  
Y
N
Y
N
Y
N
Y
N
Y
N
Y
N
21  
21  
21  
21  
21  
21  
Line settings  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Ring grp: _ _  
Ring grp: _ _  
Ring grp: _ _  
Ring grp: _ _  
Ring grp: _ _  
Ring grp: _ _  
Aux. ringer: Y N Aux. ringer: Y N Aux. ringer: Y N Aux. ringer: Y N Aux. ringer: Y N  
Aux. ringer: Y N  
Restriction service  
(Services: Restrn service)  
Schedule 1  
Schedule 2  
Schedule 3  
Schedule 4  
Schedule 5  
Schedule 6  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
Off  
Auto  
Off  
Auto  
Off  
Auto  
Off  
Auto  
Off  
Auto  
Off  
Auto  
Manual  
Manual  
Manual  
Manual  
Manual  
Manual  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
     
Page 30  
Routing service  
(Services: Routing service)  
Route #  
(001-999)  
DialOut  
(max. 24 digits or characters)  
Use pool  
000  
Route 000 has no DialOut and uses Pool A; it cannot be changed.  
A
A
B
B
C
C
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 31  
Dest codes  
(Services: Routing service: Dest codes)  
Service Schedule  
name  
(max. 7 char.)  
Normal Rte  
Night Rte  
Evening Rte  
Lunch Rte  
_____________  
_____________  
_____________  
_____________  
DestCode  
(max. 7 digits)  
Use route  
(000-999)  
Digit  
Absorb  
Length  
Use route  
(000-999)  
Digit  
Absorb  
Length  
Use route  
(000-999)  
Digit  
Absorb  
Length  
Use route  
(000-999)  
Digit  
Absorb  
Length  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
000  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
 
Page 32  
Dest codes (continued)  
Service Schedule name  
(max. 7 char.)  
Sched 4 Rte  
Sched 5 Rte  
Sched 6 Rte  
_____________  
_____________  
_____________  
DestCode  
(max. 7 digits)  
Use route  
(000-999)  
Digit  
Absorb  
Length  
Use route  
(000-999)  
Digit  
Absorb  
Length  
Use route  
(000-999)  
Digit  
Absorb  
Length  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
All  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 33  
Common settings  
(Services; Common settings)  
Control sets  
(Services; Common settings; Control sets)  
For line  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _  
Line: _ _ _ Line: _ _ _ Line: _ _ _ Line: _ _ _  
Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _  
Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _  
For sets  
Set: _ _ _  
Set: _ _ _  
Control set: _ _ _  
(for more than  
24 sets, enter  
a range of sets  
or photocopy  
this table)  
Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _  
Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _  
Set: _ _ _  
Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _  
Set: _ _ _  
Set: _ _ _  
Set: _ _ _  
Set: _ _ _  
Set: _ _ _  
Set: _ _ _  
Control set: _ _ _  
Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _  
Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _ Set: _ _ _  
Set: _ _ _  
Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _ Control set: _ _ _  
Schedule names  
(Services; Common settings; Schedule names)  
Schedule  
Sched  
Sched  
Sched  
Sched  
Sched  
Sched  
Night  
Evening  
Lunch  
Sched 4  
Sched 5  
Sched 6  
_____________  
_____________  
_____________  
_____________  
_____________  
_____________  
Schedule  
times:  
Start  
Stop  
Start  
Stop  
Start  
Stop  
Start  
Stop  
Start  
Stop  
Start  
Stop  
Monday  
23:00  
07:00  
17:00  
23:00  
12:00  
13:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
Tuesday  
Wednesday  
Thursday  
Friday  
23:00  
23:00  
23:00  
23:00  
23:00  
23:00  
07:00  
07:00  
07:00  
07:00  
07:00  
07:00  
17:00  
17:00  
17:00  
17:00  
17:00  
17:00  
23:00  
23:00  
23:00  
23:00  
23:00  
23:00  
12:00  
12:00  
12:00  
12:00  
12:00  
12:00  
13:00  
13:00  
13:00  
13:00  
13:00  
13:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
00:00  
Saturday  
Sunday  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
     
Page 34  
Sys speed dial  
Speed dial Number to dial  
Use prime line  
Pool code:___  
Display  
Name (max. 16 char.)  
Default is speed dial code  
Bypass  
restr’n  
#: (01-70)  
Use routing tabl:___ Use Line: ___ digits  
(max. 24 digits)  
Use prime line  
Pool code:___  
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Use prime line Pool code:___  
Use routing tabl:___ Use Line: ___  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 35  
Passwords  
COS pswds  
(Passwords; COS pswds)  
Pswd #  
(00-99)  
Assigned to  
(owner of password)  
Password  
(6 digits)  
User filter  
(2 digits)  
Line filter  
(2 digits)  
Remote pkg  
(00-15)  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
   
Page 36  
Call log paswds  
(Passwords; Call log pswds)  
Set:  
Log pswd  
Set:  
Log pswd  
Set:  
Log pswd  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
____________________  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 37  
Progrming pswds  
(Passwords; Progrming pswds)  
Installer  
266344  
727587  
23646  
CONFIG  
SCPLUS  
ADMIN  
BASIC  
Sys Coord+  
Sys Coord  
Basic  
22742  
IRAD password  
(Passwords; IRAD pswd)  
IRAD pswd  
Sys ID  
Hospitality  
(Passwords; Hospitality)  
Desk pswd  
4677  
HOSP  
Cond pwsd  
None  
Time&Date  
Hour:  
Minutes:  
Year:  
Month:  
Day:  
01  
00  
99  
01  
01  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
       
Page 38  
System prgrming  
Hunt groups  
(System prgrming: Hunt groups)  
Group  
Name:  
(7 characters)  
Number:  
Members  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
DN _______  
Appr only  
Appr&Ring  
Ring only  
Assigned lines  
Mode  
_______  
_______  
_______  
_______  
Rotary  
_______  
_______  
_______  
_______  
_______  
Broadcast  
Sequential  
Hunt delay  
If busy  
1
2
3
4
5
6
7
8
9
10  
BusyTone  
15 30  
_______  
Overflow  
Queue  
180  
Q timeout  
Overflow DN  
45  
60  
120  
Change DNs  
(System prgrming: Change DNs)  
(Record Change DNs on page 9.)  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
     
Page 39  
Featr settings  
(System prgrming; Featr settings)  
Background music  
Y
N
On hold  
Tones  
Music  
Silence  
Receiver volume  
Camp timeout  
Part timeout  
Park mode  
Use sys volume  
Use set volume  
30  
30  
45  
45  
60  
60  
90  
90  
120  
120  
150  
150  
180  
180  
300  
300  
600  
600  
Lowest Cycle  
Trnsfr callbk  
DRT to prime  
DRT delay  
3
4
5
6
3
12  
Y
1
N
2
4
6
10  
Held reminder  
Remind delay  
Directed pickup  
Page tone  
Y
N
30  
Y
Y
60  
N
90  
120  
150  
180  
N
Page Timeout  
15 30 60 120 180 300 2700  
Daylight time  
AutoTime&Date  
Call log space  
Space/log  
Y
Y
N
N
__________________  
Host delay  
Link time  
200  
100  
21  
400  
200  
600  
300  
800  
400  
1000  
1200  
600  
1400 1600 1800 2000  
500  
700  
800  
900 1000  
Alarm set  
_______________________  
Set relocation  
Ans. key  
Y
N
Basic  
Enhanced Extended  
Direct-dial  
(System prgrming: Direct-dial)  
D-Dial1  
Intrnl # (if D-Dial=Intrnl)  
Extrnl # (if D-Dial=Extrnl)  
Use (if D-Dial=Extrnl)  
D-Dial  
Intrnl  
Extrnl  
21  
None  
None  
Prime Line  
Line # ______  
None  
#:____________  
#:____________  
Pool code _____Routing tabl  
CAP assignment  
(System prgrming: CAP assignment)  
CAP 1  
None  
__ __ __ __ __ __ __  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
     
Page 40  
Access codes  
(System prgrming: Access codes)  
Line pool codes  
Park prefix  
Extrnl code  
Direct-dial  
A:______  
B: ______  
C:______  
0
0
0
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
7
7
7
8
9
9
9
None  
None  
None  
6
6
8
8
Auto DN  
None  
None  
Received #______________________________  
DISA DN  
Received #______________________________  
Auto Attendant  
(System prgrming: Auto Attendant)  
Auto Attend  
On  
Off  
Attd Set  
21  
First:  
Second: English  
_________  
Language  
English  
French  
French  
Spanish  
Spanish  
None  
System Answer  
After  
(number of rings)  
2
3
4
4
5
6
6
7
8
9
10  
10  
11  
11  
12  
12  
Fax Switch  
CCR  
On  
Off  
After  
2
3
5
7
8
9
(number of rings)  
For line  
Line: _ _ _  
Answer:  
Line: _ _ _  
Answer:  
Line: _ _ _  
Answer:  
Line: _ _ _  
Answer:  
Line: _ _ _  
Answer:  
Line: _ _ _  
Answer:  
YES NO  
YES NO  
YES NO  
YES NO  
YES NO  
YES NO  
CCR groups  
Group 1  
DN:  
Group 2  
DN:  
Group 3  
DN:  
Group 4  
DN:  
Group 5  
Group 6  
Group 7  
DN:  
Group 8  
Group 9  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
DN:  
Fax Switch  
On  
Off  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
   
Page 41  
Auto Attendant greetings  
Note: Programmable prompts/customized greetings are only available with the CICS 4.1 Standard Software, I-RAD enabled, Auto Attendant  
with programmable prompts configuration.  
Auto att. grtngs  
User-recorded or pre-recorded greeting  
Source  
Used by  
feature  
(greeting)  
A
User  
SA  
(Company greeting)  
CCR  
B
User  
User  
CCR  
CCR  
SA  
(Business closed)  
C
(Caller menu)  
D
User or  
(Operators busy)  
pre-recorded  
E
User or  
SA  
(Dial the extension)  
pre-recorded  
CCR  
F
User or  
SA  
(Hold the line)  
pre-recorded  
CCR  
G
User or  
CCR  
(Thank you)  
pre-recorded  
Fax DN  
(System prgrming: Fax DN)  
Fax DN  
None  
_________  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
   
Page 42  
Remote access  
(System prgrming: Remote access)  
Pkg  
Line pools  
Remote page  
Remote admin  
Remote monitor  
00  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
Package 00 permits no access to line pools  
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
Rem line access  
(Default=00)  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Rem pkg: _ _  
Rem pkg: _ _  
Rem pkg: _ _  
Rem pkg: _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Rem pkg: _ _  
Rem pkg: _ _  
Rem pkg: _ _  
Rem pkg: _ _  
IRAD  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
Line: _ _ _  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
After: 1 2 3 4 5 6 7  
8 9 10 11 12 rings  
Rec’d # length  
(System prgrming; Rec’d # length)  
Rec’d # length  
2
3
3
4
4
5
5
6
6
7
7
DN length  
(System prgrming; DN length)  
DN length  
2
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
     
Page 43  
National length  
(System prgrming; Nat’nl length)  
Nat’nl length  
0
1
2
3
4
5
6
7
8
9
10  
Make/Break ratio  
(System prgrming; Mk / Br) (Profiles 2 and 3 only)  
Make/Break ratio  
40/60  
30/70  
Release reasons  
(System prgrming; Release reasons)  
Release reasons  
____________________________________  
Intrnl modem  
(System prgrming; Intrnl modem)  
Intrnl modem  
Fast  
Slow  
Alarm reporting  
(System prgrming; Alarm reporting)  
Alarm report  
On  
Off  
Phone #1  
None  
_ _ _ _ _ _ _ _ _ _ _ _  
None  
Phone #2  
Use line  
_ _ _ _ _ _ _ _ _ _ _ _  
None  
_ _ _  
Retry time  
15  
__ __  
(1-50 minutes)  
Num. retries  
0
1
2
3
4
5
6
7
8
9
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
         
Page 44  
Photocopy pages before using.  
Hospitality  
(System prgrming; Hospitality)  
Room/desk info  
Sets: (max. 7 digits)  
Room #:  
Adm pwd req’d  
Call restrns  
Vacant:  
Y
N Y  
N Y  
N Y  
N Y  
N Y  
N Y  
N Y  
N
Use flt: __  
Use flt: __  
Use flt: __  
Use flt: __  
Hour:  
Basic:  
Mid:  
Full:  
Service time  
Minutes:  
Alarm  
Attn attempts:  
1
2
3
4
5
Retry intervl:  
2
4
6
8
(in minutes)  
Attn duration:  
10 15 20 30 40 50  
(in seconds)  
Telco Features  
VMsg ctr tel#s  
(Telco features; ONN blocking)  
VMsg ctr tel#s  
VMsg center 1  
____________  
VMsg center 2  
____________  
VMsg center 3  
____________  
VMsg center 4  
____________  
VMsg center 5  
____________  
ONN blocking  
(Telco features; ONN blocking)  
Analog VSC  
Tone:  
None  
________________ F78, (0-9), *, #  
________________ (0-9)  
Pulse:  
None  
BRI VSC  
Code  
None  
________________ F78, (0-9), *, #  
Software Keys  
Sys ID  
(8 digits)  
____________  
Key 1  
____________  
Password Keys  
(8 digits)  
Key 2  
Key 3  
____________  
____________  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
         
Page 45  
Hardware  
Cd1-KSU  
(for Profiles 1 and 4)  
For Loopstart Trunk Cartridges  
Card type  
Lines  
Loop  
001-004  
Discon timer  
60  
100  
260 460 600  
For BRI Cartridges  
Card type  
BRI-U2  
201-202  
201  
BRI-U4  
BRI-ST  
Loops  
203-204  
202  
S
203  
S
204  
S
Loop  
Type  
S
T
LT NT  
T
LT NT  
T
LT NT  
T
LT NT  
Lines  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
SPID1  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
# of B-channls  
Network DN 1  
Call type  
1
2
1
2
1
2
1
2
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 2  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 3  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 4  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 5  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 6  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 7  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 8  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
   
Page 46  
SPID2  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
# of B-channls  
Network DN 1  
Call type  
1
2
1
2
1
2
1
2
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 2  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 3  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 4  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 5  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 6  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 7  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 8  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
D-packet srvc  
Y
N
Y
N
Y
N
Y
N
(if D-packet  
srvc=Y)  
(if card is BRI-ST)  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
S-loop  
(if card is BRI-U2  
or BRI-U4)  
LT-loop  
TEIs  
(0-63)  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
ONN blk  
SrvcCode  
SrvcCode  
SrvcCode  
SrvcCode  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 47  
if Loop is S  
Sampling  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
if Loop is S or LT  
DNs on Loop  
(7 ISDN DNs max. for  
the system)  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Loop DN  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Cd2-KSU  
(for Profiles 1 and 4)  
For Loopstart Trunk Cartridges  
Card type  
Lines  
Loop  
025-028  
Discon timer  
For BRI Cartridges  
Card type  
Loops  
60  
100  
260 460 600  
BRI-U2  
225-226  
225  
BRI-U4  
BRI-ST  
227-228  
226  
S
227  
228  
Loop  
Type  
S
T
LT NT  
T
LT NT  
S
T
LT NT  
S
T
LT NT  
Lines  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
SPID1  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
# of B-channls  
Network DN 1  
Call type  
1
2
1
2
1
2
1
2
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 2  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 3  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 4  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 5  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
 
Page 48  
Call type  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 6  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 7  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 8  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
SPID2  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___  
# of B-channls  
Network DN 1  
Call type  
1
2
1
2
1
2
1
2
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 2  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 3  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 4  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 5  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 6  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 7  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
Network DN 8  
Call type  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Voice  
Data  
Both  
Both  
Both  
Both  
D-packet srvc  
Y
N
Y
N
Y
N
Y
N
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 49  
(if D-packet  
srvc=Y)  
(if card is BRI-ST)  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
S-loop  
(if card is BRI-U2  
or BRI-U4)  
LT-loop  
TEIs  
(0-63)  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
__ __  
SuprsBit  
__ __  
__ __  
__ __  
__ __  
__ __  
ONN blk  
SrvcCode  
SrvcCode  
SrvcCode  
SrvcCode  
if Loop is S  
Sampling  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
if Loop is S or LT  
DNs on Loop  
(7 ISDN DNs max. for  
the system)  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Loop DN  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Cd1-KSU  
(for Profiles 2 and 3)  
For Loopstart Trunk Cartridges  
Card type  
Lines  
Loop  
001-004  
Discon timer  
For BRI Cartridges  
Card type  
Loops  
60  
100  
260 460 600  
BRI-2  
201-202  
201  
BRI-ST  
203-204  
202  
S
203  
204  
Loop  
Type  
S
T
T
S
T
S
T
Lines  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
if Loop is S  
Sampling  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 50  
DNs on Loop  
(7 ISDN DNs max. for  
the system)  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Loop DN  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
if Loop is T  
ClockSrc  
Primary  
Scndry  
Primary  
Scndry  
Primary  
Scndry  
Primary  
Scndry  
TimMstr  
TimMstr  
TimMstr  
TimMstr  
Ovlap recving  
Y
N
Y
N
Y
N
Y
N
Public Digit length  
1 2 3 4 5 6 7 8 9 10  
1 2 3 4 5 6 7 8 9 10  
1 2 3 4 5 6 7 8 9 10  
1 2 3 4 5 6 7 8 9 10  
11 12 13 14 15  
11 12 13 14 15  
11 12 13 14 15  
11 12 13 14 15  
Cd2-KSU  
(for Profiles 2 and 3)  
For Loopstart Trunk Cartridges  
Card type  
Lines  
Loop  
025-028  
Discon timer  
For BRI Cartridges  
Card type  
Loops  
60  
100  
260 460 600  
BRI-2  
225-226  
225  
BRI-ST  
227-228  
226  
S
227  
228  
Loop  
Type  
S
T
T
S
T
S
T
Lines  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
__ __ __  
if Loop is S  
Sampling  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
Adaptve  
Fixed  
DNs on Loop  
(7 ISDN DNs max. for  
the system)  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Loop DN  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
__ __ __ __ __ __ __  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 51  
if Loop is T  
ClockSrc  
Primary  
Scndry  
Primary  
Scndry  
Primary  
Scndry  
Primary  
Scndry  
TimMstr  
TimMstr  
TimMstr  
TimMstr  
Ovlap recving  
Y
N
Y
N
Y
N
Y
N
Public Digit length  
1 2 3 4 5 6 7 8 9 10  
1 2 3 4 5 6 7 8 9 10  
1 2 3 4 5 6 7 8 9 10  
1 2 3 4 5 6 7 8 9 10  
11 12 13 14 15  
11 12 13 14 15  
11 12 13 14 15  
11 12 13 14 15  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 52  
Maintenance  
System version  
(Maintenance; System version)  
System Version  
Port/DN Status  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
Device:  
SP:  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
   
Page 53  
Sys test log  
(Maintenance; Sys test log)  
Sys Test Log  
Log item  
Time of log item  
Number of repetitions  
Time and date that log was checked  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
 
Page 54  
Sys Admin Log  
(Maintenance; Sys Admin Log)  
Sys Admin Log  
Log item  
Time of log item  
Number of repetitions  
Time and date that log was checked  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 55  
Template specific defaults  
For the Norstar CICS 4.1system, the Square template is the default template. The Square default  
values are used throughout the Programming Record. The Hybrid and PBX templates are also  
available as an option at startup. The following charts show the sections of the Programming Record  
where the Hybrid and PBX default values differ from the Square template default values.  
Terminals&Sets defaults  
Line Access  
Setting  
Square  
Hybrid  
PBX  
Line assignment Lines001 to002: Set 21  
All external lines  
Appear & Ring  
Line001:Appear and target lines:  
& Ring  
Unassigned  
All other external  
lines and target  
lines:  
All other external  
lines and target  
lines:  
Unassigned  
Unassigned  
All other sets  
Line001:Appear  
Only  
All other external  
lines and target  
lines:  
Unassigned  
LinePool access No  
Prime line None  
Yes (Pool A)  
Intercom  
Intercom  
Lines defaults  
Trunk/Line data (physical lines)  
Setting  
Square  
Hybrid  
PBX  
Line type  
Public  
Pool A (Lines 1-8)  
Pool B (Lines 25-32)  
Pool A (Lines 1-8)  
Pool B (Lines 25-32)  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
 
Page 56  
Glossary of programming headings and settings  
The dots next to each heading in this glossary, represent the programming hierarchy in the Norstar Compact ICS.  
Select the Profile.  
Profile  
Select the Dialpad layout.  
Dialpad  
Startup  
Select the template to assign the default values for the system.  
Template  
• Start DN  
Enter the DN of the first telephone. The Start DN must be between 2 and 7 digits in length. The  
default DN length and default Received number length are also defined by the Start DN. If the  
first digit of a DN is the same as the Direct-dial digit, the Call Park prefix, or the first digit of a  
line pool access code, it sets them to None.  
This programming section lets you assign settings to each telephone.  
Enter the DN of the telephone you want to program.  
Terminals & Sets  
Show set:_  
Assign lines to individual telephones. You can copy the settings from one telephone to another.  
• Line access  
Line assignment allows you to determine which lines are assigned to the telephone and how  
incoming calls on those lines will be handled.  
•• Line assignment  
Enter the line numbers of the lines to be assigned to the telephone.  
••• Show line:_  
•• Prime line  
Select a prime line for the telephone. The prime line is the first line selected automatically for  
making calls from the telephone. To select a line or line pool as prime line, the line or line pool  
must have been assigned to the telephone.  
Select the number of intercom buttons on a telephone for accessing internal lines and line pools.  
For each line pool (A to C), select whether a telephone will have access.  
•• Intercom keys  
•• LinePool access  
•• Answer DNs  
Assigns answer buttons to a telephone so that it can monitor and answer calls for another  
telephone. You can assign up to five answer DNs.  
Enter the DN of the telephone for which this telephone will have an answer button.  
••• Show set  
•• OLI #  
Enter a Network DN to be used for the Call Display information when this telephone makes an  
outgoing call on a BRI line.  
For some ISDN sets (for example, video conference sets) this allows the OLI digits to replace the  
ISDN set’s internal DN digits for proper call setup. (Profile 1 & 4 only.)  
•• OLI as calld #  
A programming section that lets you select the capabilities for each telephone.  
Redirect all incoming calls when this telephone does not answer.  
• Capabilities  
•• Fwd no answer  
••• Fwd to  
Enter the external number or the DN of the Norstar telephone to which you want to redirect all  
incoming calls.  
Select the number of rings before an unanswered call is forwarded. The heading appears only  
if a Forward no answer external number or DN is assigned.  
••• Forward delay  
Redirect all incoming calls when this telephone is busy with another call.  
•• Fwd on busy  
••• Fwd to  
Enter the external number or the DN of the Norstar telephone to which you want calls to be  
redirected when this telephone is busy.  
Select whether or not an incoming call rings if the user is already on another call.  
Select whether Handsfree will be available to a telephone.  
•• DND on Busy  
•• Handsfree  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
 
Page 57  
Select whether a user can automatically answer a voice call without lifting the receiver or  
•• HF answerback  
•• Pickup grp  
pressing the Handsfree/Mute button. This setting is always turned off for an M7100 telephone.  
Select one of four pickup groups to which the telephone will belong. Any user in a pickup group  
can answer calls to any other telephone in his or her group using the Call Pickup - group feature  
(ÄàÞ). Choose “None” to disable the feature for this telephone.  
Select one of three page zones to which this telephone will belong. Choose “None” to prevent  
pages at this telephone.  
•• Page zone  
Select whether paging announcements can be made from this Norstar telephone.  
•• Paging  
•• D-Dial  
Select whether you can call the Direct-dial telephone from this telephone using the Direct-dial  
digit.  
Select whether to allow this telephone to interrupt calls or to override Do Not Disturb at another  
Norstar telephone. A priority call (Äßá) can be refused by the person whose call  
you are trying to interrupt by using Do Not Disturb (Ä¡Þ). A priority call cannot be  
blocked by a person whose telephone is already in Do Not Disturb.  
•• Priority call  
Select whether a telephone number will be dialed automatically when a user lifts the receiver or  
presses ©. Choose Intrnl to enter an internal Norstar telephone as the hotline. Choose  
Extrnl to enter an external telephone as the hotline.  
•• Hotline  
Select whether an auxiliary ringer (if installed) will ring for incoming calls at this telephone.  
Select whether to allow lines at this telephone to be redirected.  
•• Aux. ringer  
•• Allow redirect  
•• Redirect ring  
Select whether a telephone rings briefly when a call on one of its lines is redirected by the Line  
Redirection feature (Ä¡Ý).  
Programming settings which are used with an analog terminal adapter (ATA) or the internal  
analog terminal adapter (I-ATA).  
•• ATA settings  
••• ATA ans timer  
••• Use ringback  
••• ATA use  
Select the delay between the last digit you dial on a device connected to an ATA and when the  
analog device is ready to receive DTMF tone from the far end analog device.  
Select whether the I-ATA detects ringback or waits a pre-programmed number of seconds  
before the call is connected.  
Select whether or not the device attached to the ATA is an off-premise extension (located off  
site) or located in the same place as the ICS. This setting is not available for the I-ATA.  
A programming section that lets you assign names (up to 7 characters long) to telephones.  
• Name  
A programming section that lets you program the user features, such as external autodialers,  
language choice and display contrast, which personalize the operation of the user’s set.  
• User prefernces  
Allows you to pre-program the model of Norstar set which will use this DN.  
•• Model  
Lets you program the buttons with internal and external autodialers and/or programmed  
feature keys.  
•• Button prgrming  
Section where user speed dialers can be programmed.  
Select whether the set will log all calls, no calls, or only unanswered calls.  
Select standard dial, pre-dial or automatic dial.  
Choose the display language: English, French or Spanish.  
Select a display contrast level.  
•• User speed dial  
•• Call log opt’ns  
•• Dialing opt’ns  
•• Language  
•• Display cntrst  
•• Ring type  
Select a ring type.  
Lets you create and assign restriction filters which prevent a user from making certain kinds of  
calls from a telephone, and copy the restrictions from this set to other sets.  
• Restrictions  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 58  
These are sets or groups of restrictions and associated overrides that specify the external  
numbers or feature codes that cannot be dialed from a telephone or line.  
•• Restrn filters  
Enter the two-digit restriction filter number.  
••• Show filter:_  
•••• Restrn 00  
•••• Restrn 01  
••••• Deny  
Filter 00 is pre-set with no restrictions.  
First programmable restriction. For each filter, enter up to 48 restrictions.  
Enter the digits you wish to be restricted when this filter is used.  
••••• No overrides  
•• Set restrns  
••• Filters  
Enter the dialing sequences which are allowed to override this filter, if any.  
Select restrictions for a specific set.  
Select the restriction filters for a specific set.  
Enter the number (two-digit) of the restriction filter to apply during normal service and each of  
the schedules.  
•••• Normal  
•••• Night  
•••• Evening  
•••• Lunch  
•••• Sched 4  
•••• Sched 5  
•••• Sched 6  
••• Set lock  
Select the level of personal programming and customizing that can be performed at a  
telephone.  
Select whether a telephone can use Last Number Redial (ÄÞ).  
••• Allow last no  
••• Allow saved no  
••• Allow link  
Select whether a telephone can use Saved Number Redial (Äßà).  
Select whether a telephone can use Link (ÄàÚ) to access the features of a private  
branch exchange.  
Assign restriction filters to certain lines on each set in your system.  
Select the line on this telephone for which the restriction will apply.  
•• Line/set rstrns  
••• Show line:_  
•••• Normal  
For each line, enter the number (two-digit) of the restriction filter to apply during normal service  
and each of the schedules.  
•••• Night  
•••• Evening  
•••• Lunch  
•••• Sched 4  
•••• Sched 5  
•••• Sched 6  
This programming section lets you program the way the Norstar system works with features and  
services that are based in the public network or other outside source, namely Call Display and  
an external voice message service.  
Telco features  
In this programming section, you can assign CLASS services, such Call Display, in order to  
capture information about incoming and outgoing calls.  
•• CLASS assignment  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 59  
Enter the number of the line for which the telephone will log Call Display information.  
••• Show line:_  
Select whether the telephone displays the Call Display information when a call is ringing on the  
specified external line.  
•••• Caller ID set  
Select whether the telephone will automatically log Call Display information for calls on the  
specified external line.  
•••• Call log set  
•••• Extl VMsg set  
••• 1stDisplay  
Select whether this telephone will display a message indicator provided to the specified line by  
an external voice message service.  
Select call information to be displayed first: name of caller, number of caller, or name of line in  
your Norstar system that the call is on.  
Allocate a number of Call log spaces from a system-wide pool of spaces to the telephone.  
Assign this telephone its log spaces.  
••• Log space  
•••• Log: Pool:  
Lines  
A programming section that lets you assign settings to each line.  
Enter the line number of the line you want to program.  
Show line:_  
The programming section that lets you program settings for physical lines and target lines that  
affect how the line is used by the Norstar system.  
• Trunk/Line data  
The trunk type is determined by the cartridge or card installed in the slot.  
•• Trunk type  
•• Line type  
Select how a line will be used by telephones in the system. Choose Public to be able to assign  
the line to any telephone. Choose Private to make the line private to a telephone. Enter the DN  
of the telephone you want to assign the line. Choose Pool to place the line in a line pool (A to C).  
Enter the Received number for this target line. When the system automatically answers an  
incoming call on auto-answer Loopstart or BRI lines, it collects the number of digits specified by  
the Rec’d # length setting, matches these digits to a Received number, and routes the call to the  
appropriate target line. A Received number cannot be the same as, or be the start digits of a  
line pool access code, a destination code, the DISA DN, or the Auto DN.  
•• Rec’d #  
Select the appropriate dial mode for the line. The dial mode you select here must match the dial  
mode setting of the line at the central office (the public network). The default is tone. This setting  
does not appear for target lines.  
•• Dial mode  
Enter the DN of a prime telephone as a backup to answer calls on this line.  
•• PrimeSet  
Select whether a line will be private to the individual on a call, or whether it can be shared by  
other users while a call is in progress. The Privacy setting can be suspended for individual calls  
using the privacy feature (Ä¡Ü).  
•• Auto privacy  
Select whether the line operates with disconnect supervision. Auto answer and DISA lines must  
be supervised. This setting does not appear for target lines.  
•• Trunk mode  
•• Ans mode  
Select whether the line will be answered manually (normal call answering method) or  
automatically by the system. Auto answer allows remote access to your Norstar system. This  
setting only appears if Trunk mode is supervised.  
Select whether a line programmed for auto answer will be answered with Direct Inward System  
Access (DISA) or with system dial tone. This setting only appears if Ans mode is Auto. This  
setting does not appear for target lines.  
•• Ans with DISA  
Select whether an auxiliary ringer (if installed) will ring for incoming calls on this specific line.  
•• Aux. ringer  
Select whether an idle line will be put on hold when another line is selected. This setting does  
not appear for target lines.  
•• Full AutoHold  
Select the appropriate loss/gain and impedance package for analog loop lines only. Select the  
package based on the terminating switch type (PBX or CO) and the distance from the switch  
(Short, Medium, or Long). This setting only appears if the line is on a loopstart cartridge. It does  
not appear for target lines.  
•• LossPkg  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 60  
You can name a line, if applicable, or the name defaults to the line number (for example,  
Line001).  
• Name  
Lets you create and assign restriction filters which prevent a user from making certain kinds of  
calls using a line.  
• Restrictions  
These are sets or groups of restrictions and associated overrides that specify the external  
numbers or feature codes that cannot be dialed from a telephone or line.  
•• Restrn filters  
Enter the two-digit filter number.  
••• Show filter:_  
•••• Restrn 00  
•••• Restrn 01  
••••• Deny  
Filter 00 is pre-set with no restrictions.  
First programmable restriction. For each filter, enter up to 48 restrictions.  
Enter the digits you wish to be restricted when this filter is used.  
••••• No overrides  
•• Line restrns  
••• Normal  
Enter the dialing sequences which are allowed to override this filter, if any.  
Designate restriction filters to the lines.  
For each line, enter the number (two-digit) of the restriction filter to apply during normal service  
and each of the schedules.  
••• Night  
••• Evening  
••• Lunch  
••• Sched 4  
••• Sched 5  
••• Sched 6  
In this section, you can assign restriction filters that apply only to remote users of the line.  
Enter the number for the line you want to program.  
•• Remote restrns  
••• Show line:_  
•••• Normal  
For each line assigned to this telephone, enter the number (two-digit) of the restriction filter to  
apply to remote use during normal service and each of the schedules.  
•••• Night  
•••• Evening  
•••• Lunch  
•••• Sched 4  
•••• Sched 5  
•••• Sched 6  
Telco features  
•• VMsg center  
Services  
This programming section lets you assign settings for an external voice message service.  
Assign a VMsg center to be used for voice message service for the line.  
A programming section that lets you create services for night ringing, routing and restrictions  
for making external calls.  
Assign additional telephones to ring for a line during specified periods of the day or night.  
Define groups of extended ringing sets.  
• Ringing service  
•• Ringing groups  
••• Show group:_  
Enter the number of the Ring group you want to program (01-20).  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 61  
Enter the valid ring group number from 01 to 20. All ring groups have DN 21 assigned to them.  
•••• Ring grp 01  
••••• Show set:_  
Enter the number of the set you wish to assign to this Ring group or use LIST to display the valid  
sets added to this Ring group.  
In this setting, you select options for your ringing service.  
Select how you want your service activated.  
•• Sched:Night  
••• Service  
Select Y (Yes) to allow you use the Trunk Answer feature (Ä¡ââ) to answer, from  
any telephone, an external call ringing at any other telephone in the system when ringing  
service is on.  
••• Trunk answer  
Enter the internal telephone number of the Extra-Dial telephone. This allows you to assign an  
additional Direct-dial telephone in the Norstar system for each schedule you use.  
••• ExtraDial  
Select ringing service options for each line.  
Enter a valid line number.  
••• Line settings  
•••• Show line:_  
••••• Ring grp  
••••• Aux. ringer  
Enter the line number of a pre-defined ring group between 01 and 20.  
Indicate whether the auxiliary ringer (if installed) also rings for this line when Ringing service is  
on.  
Select the ringing service settings for each of these schedules as you have done for Night sched.  
•• Sched:Evening  
•• Sched:Lunch  
•• Sched:Sched 4  
•• Sched:Sched 5  
•• Sched:Sched 6  
• Restrn service  
•• Sched:Night  
Programming section where you can select the method for activating alternate restrictions.  
In this section you can indicate how alternate call routing should be activated for each of the  
schedules.  
Select how you want your service activated.  
••• Service  
Set up activation method for each of these schedules, as you have with Night sched.  
•• Sched:Evening  
•• Sched:Lunch  
•• Sched:Sched 4  
•• Sched:Sched 5  
•• Sched:Sched 6  
• Routing service  
A programming section that lets you create up to 500 destination codes and 999 routes to  
provide a dialing plan or “least cost routing”.  
Create the routes to be used when a destination code is dialed.  
Enter the number of the route you want to create.  
•• Routes  
••• Show route:_  
•••• DialOut  
•••• Use  
Enter the number (up to 24 digits or characters) you want this route to dial out (if required).  
Select the line pool you want this route to use.  
Define which routes are used when a destination code is dialed.  
•• Dest codes  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 62  
Up to 500 destination codes are programmable.  
••• Show DstCode:_  
Enter the digits (up to 7 digits) of the destination code that you want to define. No two  
destination codes can be identical. A destination code cannot begin with a digit assigned as  
the Call Park prefix, or a Direct-dial digit. It cannot be the same as, or be the start digits of a  
DN, the DISA DN or the Auto DN, a line pool code, or a received number.  
For the last destination code, define the normal service. You will usually use the route that has  
the lowest cost for the times when normal service is in use.  
•••• Normal  
Enter the number of digits from the destination code that will not be dialed as part of the  
outgoing number.  
•••• AbsorbLength  
For this destination code, define a route for each of the schedules, as you have done for normal  
service.  
•••• Night  
•••• Evening  
•••• Lunch  
•••• Sched 4  
•••• Sched 5  
•••• Sched 6  
•• Sched:Night  
••• Service  
This schedule can be activated automatically or manually, or it can be left in the default Off.  
Select how you want this service activated, if applicable.  
For each schedule, choose whether you want a destination code to use the route assigned to  
normal service when the route assigned to the schedule is busy.  
••• Overflow  
Select how you want each of the scheduled services to be activated, and whether a destination  
code uses the route used with normal service when the route used with the schedule is busy.  
•• Sched:Evening  
•• Sched:Lunch  
•• Sched:Sched 4  
•• Sched:Sched 5  
•• Sched:Sched 6  
• Common settings  
•• Control sets  
••• For lines  
In this programming section, you can assign settings that are shared by different services.  
Assign control telephones to turn services on or off.  
Select a control set for each line.  
Enter the number of the line you want to program.  
•••• Show line:_  
••••• L001  
Assign a control telephone to each external line. This telephone is where you turn services on  
and off for the line.  
Select a control set for each set.  
••• For sets  
Enter the number of the telephone you want to program.  
•••• Show set:_  
••••• <internal #>  
Assign a control telephone to each telephone. This telephone controls Restriction service and  
Routing service for the set.  
The schedule name is shown on the display of the control telephone when the schedule is turned  
on. It identifies the active schedule.  
•• Schedule names  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 63  
Enter the name of the schedule, or use the default name or number.  
••• Sched 1  
••• Sched 2  
••• Sched 3  
••• Sched 4  
••• Sched 5  
••• Sched 6  
Enter automatic start and stop times for schedules.  
Assign the schedule times for Monday.  
Select the schedule for which you want to program start and stop times.  
Enter the start time.  
•• Schedule times  
••• Monday  
•••• Sched:Night  
••••• Start time  
••••• Stop time  
••• Tuesday  
Enter the stop time.  
Assign scheduled start and stop times for each scheduled service and day of week, as you have  
done for Monday.  
••• Wednesday  
••• Thursday  
••• Friday  
••• Saturday  
••• Sunday  
Enter the two-digit speed dial code (01-70) that you want to program, then enter the telephone  
number (up to 24 digits) that you want to assign to it.  
Sys speed dial  
Enter the two-digit speed dial code (01-70) that you want to program.  
Enter the telephone number (up to 24 digits) that you want to assign to it.  
• Speed dial #  
•• 01:  
Select the line to use for dialing this speed dial number. If you select Use routing table, the  
number dialed is treated as a destination code and is routed according to the routing tables.  
•• Use prime line  
Select whether a telephone displays the number dialed when a speed dial code is used.  
•• Display digits  
•• Name  
Enter a name (up to 16 characters) for a speed dial number. When the number is dialed, the  
telephone displays this name, not the number. This heading only appears if Display digits is N.  
Select whether a programmed system speed dial number can bypass restrictions programmed  
for a line and/or a telephone.  
•• Bypass restr’n  
Passwords  
A programming section that lets you assign passwords to restrict access to programming and  
system features.  
Create up to 100 six-digit passwords that control access and use of the Norstar system by  
internal and remote users.  
• COS pswds  
Enter the two-digit Class of Service password number (00-99).  
Enter a six-digit password.  
•• Show pswd#:_  
••• Pswd  
Assign a restriction filter to the Class of Service password.  
••• User flt  
••• Line flt  
Select whether a Class of Service password will use the default line filter or a different line filter  
(enter the two-digit filter number).  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 64  
Select whether a Class of Service password will use the default remote package or a different  
remote package (enter the two-digit remote package number).  
••• Remote pkg  
A programming section that allows you to clear any Call Log password programmed with the  
Call Log feature.  
• Call log pswds  
Enter the DN of the telephone you want to program.  
•• Show set:_  
••• Log pswd  
• Programing pswds  
•• Installer  
Erase the call log password for this telephone.  
In this section you can create your own programming password rather than use the default.  
Enter the new installer password which gives you access all the programming settings.  
Enter the new system coordinator password which gives you access to selected programming  
settings.  
•• SysCoord+  
Enter the new system coordinator password which gives you access to everyday programming  
settings.  
•• Sys coord  
•• Basic  
Enter the new basic password which gives you access to the most commonly used programming  
settings.  
View or change the password used for remote programming.  
• IRAD pswd  
• Hospitality  
A programming section that allows to create Hospitality services passwords if required, rather  
than use the defaults.  
Enter the new Desk password which gives access to all Hospitality services programming  
settings.  
•• Desk pswd  
•• Cond pswd  
Enter a Condition password which gives certain employees access to the Room condition  
programming settings in Hospitality services.  
A programming section that lets you set the system's clock to the correct time and date.  
Time&Date  
A programming section that lets you change system-wide settings, Auto Attendant, and CCR  
programming  
System prgrming  
A programming section that lets you set up incoming calls on a specific DN to be routed to a  
group of sets.  
• Hunt groups  
Enter the DN of the telephone you want to program.  
•• Show group:_  
••• Member DNs  
•• Line assignment  
•• Mode:  
Enter the DN of the telephone you want to add to the group.  
Allows you to assign or unassign a line to a particular hunt group.  
Allows you to determine how an incoming call will be handled by the hunt group.  
Select a delay value to determine how long a set rings before the call moves on the next member  
set.  
•• Hunt delay:  
Allows you to determine how an incoming call is to be treated when all hunt group member sets  
are busy.  
•• If busy:  
Allows you to set the number of seconds the incoming call remains in the hunt group call queue  
before it is offered to the overflow position.  
•• Q Timeout:  
Enter the DN of the set you want the hunt group overflow calls to be presented.  
•• Overflow:  
• Change DNs  
Change the DN of a telephone. All DNs must be the same length. The first digit of a new DN  
cannot be the same as the external line access code, the Call Park prefix, the Direct-dial digit,  
or the first digit of a line pool access code. If you change an individual DN, you must quit  
programming for the change to take effect. If you have additional programming to do, quit and  
then begin a new programming session.  
Programming for features that are used system-wide.  
• Featr settings  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 65  
Select whether users can listen to music through their telephone speaker using the Background  
Music feature (Ä¡ß). A music source must be connected to the ICS.  
•• Backgrnd music  
•• On hold  
Select whether a caller on hold hears music (from a source such as a radio connected to the  
ICS), periodic tones, or silence.  
Select whether the volume of a telephone receiver/headset automatically resets to the system  
default level, or retains the level set at the telephone.  
•• Receiver volume  
•• Camp timeout  
•• Park timeout  
•• Park mode  
Select the number of seconds a call can remain camped before it returns to the telephone that  
camped it.  
Select the number of seconds a call on an external line can remain parked before it returns to  
the telephone that parked it.  
Select whether the system will use Call Park codes in a sequence from lowest to highest, or use  
the lowest numbered code that is available when the call is parked.  
Select the number of times a transferred call rings before it returns to the telephone that  
transferred it.  
•• Trnsfr callbk  
Select whether to automatically transfer unanswered external calls to a prime telephone.  
•• DRT to prime  
•• DRT delay  
Select the number of times a call rings before Delayed Ring Transfer transfers it to a prime  
telephone. This setting only appears if DRT to prime is Yes.  
Select whether the telephone reminds you when a call is on hold.  
•• Held reminder  
•• Remind delay  
Select the number of seconds before the telephone reminds you that a call is on hold. The setting  
only appears if Held reminder is Yes.  
Select whether users can answer calls at any telephone using the directed call pickup feature  
(Äàß).  
•• Directd pickup  
Select whether users can hear a Page Announcement tone (Äßâ) over the system.  
Select the number of seconds before a Page is automatically disconnected.  
Select whether daylight savings time is automatically applied to the system clock.  
Customize how Call log space is allocated to telephones in the system.  
•• Page tone  
•• Page Timeout  
•• Daylight time  
•• Call log space  
••• Reset all logs?  
This programming step confirms that you want to reallocate the Call log space equally to all  
telephones in your system.  
Select the Call log space that will be given to all telephones in the system.  
••• Space/log  
•• Host delay  
Select the delay, in milliseconds, between the selection of an outgoing line and the moment that  
Norstar sends dialed digits or codes on that line.  
Select the duration, in milliseconds, of the link signal used to access features on a remote system.  
•• Link time  
•• AlarmSet  
Enter the DN of the telephone used to display alarm messages when a problem occurs in the  
Norstar system.  
Select whether telephones in the system can be moved without losing their programming.  
Allows you to assign up to eight answer keys. Settings are Basic, Enhanced, and Extended.  
Select whether an internal or external number is used for the Direct-dial telephone.  
•• Set relocation  
•• Ans. key:  
• Direct-dial  
•• D-Dial 1  
Enter the internal or external number that the system will automatically dial when someone  
enters the Direct-dial digit.  
Select the telephone to be assigned as the central answering position (CAP). The CAP must be  
a M7234 telephone.  
• CAP assignment  
Enter the DN of the CAP telephone.  
•• CAP 1  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 66  
In this section, you can enter the access codes for Line pool, Park prefix, Extrnl code, Direct-  
Dial, Auto DN, and DISA DN.  
• Access Codes  
Enter a line pool access code for each line pool. A code can be one to four digits in length. A  
line pool access code cannot start with the same digits as the Call Park prefix or the Direct-dial  
digit, any DN (including Rec'd #s, the DISA DN, or the Auto DN), or a destination code.  
•• Line pool codes  
Select the first digit of the Call Park retrieval code.  
•• Park prefix  
•• Extrnl code  
Enter the one-digit external line access code. This code allows an M7100 telephone or a device  
connected to an ATA to access external lines. The external line access code cannot be the same  
as the Call Park prefix, the Direct-dial digit, or the first digit used by an internal DN.  
Select the digit used to dial a Direct-dial telephone. The digit cannot be the same as the first  
digit of a DN, of a line pool access code, the external line access code or the Call Park prefix.  
It cannot be the first digit of a destination code.  
•• Direct-dial  
•• Auto DN  
Enter the DN that a remote user can dial on an auto answer line so that the line is answered  
with system dial tone. A remote user can then use the system resources allowed by the remote  
access package assigned to the line. The length of the Auto DN is the same as the Rec'd #  
length.The Auto DN cannot be the same as a line pool access code or a destination code.  
Enter the DN that a remote user can dial on an auto answer line so that the line is answered  
with stuttered dial tone. A remote user must then enter a Class of Service password to gain  
access to system resources. The remote access package assigned to the Class of Service  
password determines which resources they can use. The length of the DISA DN is the same as  
the Rec'd # length. The DISA DN cannot be the same as a line pool access code or a destination  
code.  
•• DISA DN  
This programming section lets you access the Auto Attendant features (System Answer and  
Custom Call Routing).  
• Auto Attendant  
Set to On to make the Auto Attendant features available for use.  
•• Auto Attend  
•• Attd Set  
Enter the DN of the set which will have its lines answered by System Answer. It should not be  
the DN for an external ATA or the internal ATA.  
Select the language used for announcements: English, French, or Spanish.  
Select the first language choice.  
•• Language  
••• First  
Select the second language, if applicable.  
••• Second  
This feature answers external calls and places them on hold at the attendant set until the  
attendant/receptionist can answer them.  
•• System Answer  
Select the number of rings that the caller will hear before the system answers.  
••• After  
Select whether the Fax detection switch is active or not with the Auto Attendant’s System Answer  
feature. The default is set to Off.  
••• Fax Switch  
Custom Call Routing(CCR) allows calls on certain lines to be directed to groups of telephones  
according to the instructions from the caller.  
•• CCR  
Select the number of rings that the caller will hear before the system answers.  
Activate Custom Call Routing for each line.  
••• After  
••• CCR lines  
••• CCR groups  
Create groups to be used with the CCR. There can be up to 9 groups made up of DNs in the  
system.  
Enter the number of the first group.  
•••• Show group:_  
••••• CCR grp 1  
••••• Show DN:_  
Assign a DN to a CCR group.  
Enter the DN of a telephone to be assigned to this CCR group.  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 67  
Select whether the Fax detection switch is active or not with the Auto Attendant’s Custom Call  
••• Fax Switch  
• Fax DN  
Routing feature. The default is set to Off.  
Enter the DN of the fax machine that functions with the Auto Attendant’s System Answer or  
Custom Call Routing feature, when the Fax switch detection is active.  
In this programming section, you can create a system of controlled access to your Norstar  
system.  
• Remote access  
•• Remote access pkgs  
Create packages to apply to lines that allow or restrict the remote access to Norstar line pools,  
paging, and remote administration.  
Enter the two-digit remote package number (00-15). Package 00 is pre-set to allow no access.  
For each package, select whether the user will have access to your system’s line pools.  
For each line pool, select whether a remote user can have access.  
••• Show pkg:_  
•••• LinePool access  
••••• Pool <pool letter (pool  
code)>  
For each package, select whether a remote user can access the Page feature.  
For each package, select whether a remote user can see and change programming.  
For each package, select whether a remote user can monitor the system.  
Select the remote access packages to be applied.  
•••• Remote page  
•••• Remote admin  
•••• Remote monitor  
•• Rem line access  
••• Show line:_  
•• IRAD  
Enter the line number.  
Program a line to be automatically answered by the I-RAD after a set number of rings.  
Any line that is programmed to be manually answered (including target lines), and that is not  
answered by CCR, can be programmed to answered by the I-RAD.  
••• Answer line  
Select the number of times the line will ring before I-RAD will answer.  
••• After  
Select the number of digits received on auto-answer lines. These digits are used to identify the  
Auto DN and DISA DNs, and to route calls to target lines.  
• Rec’d # length  
Select the length of DNs. DN length can be three to seven digits. Each increase in DN length  
adds the digit “2” to an existing DN (for example: DN 344, increased to five digits becomes  
22344).  
• DN length  
The length of the telephone number dialed to reach a person within the same country.  
Select the Make/Break ratio. The default Make/Break ratio is 40 / 60.  
Release reasons.  
• Nat’nl length  
• Make/Break:  
• Release reasons  
• Internal modem  
• Alarm reporting  
•• Auto report  
•• Phone #1  
Setting for internal modem when used for remote administration.  
Set up the system to automatically transmit alarm codes using the I-RAD.  
Turn automatic alarm reporting on or off.  
Enter the telephone number the system will dial to transmit an alarm code.  
Enter an additional telephone number the system will dial to transmit an alarm code.  
Enter the number of the line the system will use to transmit an alarm code.  
•• Phone #2  
•• Use line  
Enter the length of time in minutes the system will wait before retrying a telephone number used  
for transmitting alarm codes.  
•• Retry time  
Select the number of times the system will retry its transmission of an alarm code.  
Hospitality services programming.  
•• Num. retries  
• Hospitality  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 68  
Setting that allows the installer to assign sets to a room.  
Indicate the set you wish to configure.  
•• Room/desk information  
••• Show set:_  
Indicate the room associated with the set.  
••• Room #:_  
Indicate whether the set requires the use of the Hospitality Desk Admin password to access  
Hospitality Desk features.  
••• Adm pwd req’d:  
Setting that allows the installer to assign dialing filters to room occupancy states.  
Setting that indicates the Room is empty.  
•• Call Restrns  
••• Vacant  
•••• Use flt:  
••• Basic  
Enter the dialing filter for the room state. The filters range from 00 to 99.  
Indicates the filter to be assigned for that level of room occupancy.  
Indicates the filter to be assigned for that level of room occupancy.  
Indicates the filter to be assigned for that level of room occupancy.  
••• Mid  
••• Full  
Setting that allows for the installer or system coordinator to program a system-wide time when  
occupied rooms change state from Service done to Needs service.  
•• Service time  
Enter the hour.  
••• Hour  
Enter the minutes.  
••• Minutes  
•• Alarm  
Setting that allows the installer to configure the Alarm operation.  
Number of times the Alarm time feature attempts to get the attention of the occupant before  
cancelling.  
••• Attn attempts:  
The interval period in minutes, between each Alarm attempt.  
••• Retry intrvl  
••• Attn duration  
••• Time format  
Telco features  
The period programmed in seconds for which a set alerts on each alarm attempt.  
Choose if alarm times are entered using a 12 hour or 24 hour clock.  
This programming section lets you assign settings for external voice messaging services.  
Enter the telephone numbers (up to 24 digits) of the voice message centers. You can enter  
numbers for up to five voice message centers.  
• VMsg ctr tel#s  
•• VMsg center 1  
••• Tel#  
•• VMsg center 2  
•• VMsg center 3  
•• VMsg center 4  
•• VMsg center 5  
• ONN blocking  
Allows outgoing name and number to be blocked at the called party end on both analog and  
digital lines.  
Analog Vertical service code.  
•• Analog VSC  
••• Tone  
Vertical service code for analog tone dialing trunks.  
Vertical service code for analog pulse dialing trunks.  
Basic Rate Interface Vertical service code.  
••• Pulse  
•• BRI VSC  
••• Code:  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Page 69  
In this section, you can access optional features and services.  
Software Keys  
• SysID  
This number can be viewed on any M7324 or M7310 telephone display. Record the number,  
which you will be asked to provide when you call the Nortel Customer Response Center.  
The keys are obtained by calling the Nortel Customer Response Center at 1-800-321-2649.  
The keys are required for some system expansion activities and to activate the remote  
monitoring capability.  
• Password Keys  
Enter the eight-digit password.  
Enter the eight-digit password.  
Enter the eight-digit password.  
•• Key 1  
•• Key 2  
•• Key 3  
Hardware  
In this section, you can view and configure the Trunk Cartridges and BRI Cards installed in the  
ICS.  
Configure the cartridge or card that occupies the left-most slot in the ICS.  
The display shows the current card type.  
• Cd1-KSU  
•• Card type  
•• Lines  
View the line-number range for the lines on an LS/DS or CI Analog Trunk Cartridge.  
Specify the duration of an Open Switch Interval for an LS/DS or CI Analog Trunk Cartridge.  
View the loops on this BRI Card.  
•• Discon timer  
•• Loops  
View the settings for a particular loop on this BRI Card.  
View or change the loop type.  
•• Loop  
••• Type  
View the lines on this loop (only for S, T, and U-NT loops).  
•••• Lines  
••• No SPIDs assignd  
Assign one or two service profile identifiers (SPIDs) as supplied by your service provider. SPID  
settings appear only for S, T, and U-NT loops.  
Enter the SPID supplied by your service provider.  
••• SPID1  
Select the number of B-channels that are associated with the SPID.  
Enter the Network DNs that are associated with the SPID.  
••• # of B-channls  
••• Network DNs  
•••• Call type  
Select the Call type used with the Network DN. For each Network DN, use only one of each of  
the Voice and Data call type settings, or a single Both call type setting.  
Enter the second SPID supplied by your service provider, if applicable.  
Configure the D-packet service for this loop.  
••• SPID2  
••• D-packet srvce  
•••• D-packet srvc  
•••• Lp201  
Turn the D-packet service for this loop on or off.  
Select the S-loop (for BRI-ST Card) or U-LT loop (for BRI-U2 or BRI-U4 Card) that supports the  
D-packet service.  
Add up to eight Terminal Endpoint Identifiers (TEIs). Each TEI is supplied by your service  
provider and is associated with an ISDN device.  
•••• TEIs  
Enter the two-digit TEIs supplied by your service provider.  
Determine the ONN blocking for BRI loops.  
••••• No TEIs on loop  
••• ONN blk  
Select the sampling used by an S loop.  
••• Sampling  
Assign the ISDN DNs that use this S loop or U-LT loop.  
Enter up to seven ISDN DNs for each S loop or U-LT loop.  
••• DNs on Loop 201  
•••• Assign DNs  
P0906186 Issue 02  
Compact ICS 4.1 Programming Record  
 
Page 70  
Designate one of the ISDN DNs assigned to the loop as the main ISDN DN.  
••• Loop DN  
• Cd2 on KSU  
Select the type of cartridge or card that occupies the second slot in the ICS (The slots are  
numbered from left to right). If your system is using restricted software which has not been  
upgraded, this setting does not appear.  
This programming section lets you make diagnostic checks on the system.  
Record the system version shown on the display after entering the maintenance section.  
View the Port/DN status.  
Maintenance  
• System version  
• Port/DN status  
• Module status  
• Sys test log  
• Sys admin log  
• Provisioning  
Tests  
View the Module status.  
View items in Sys test log.  
View items in log.  
Place BRI loops in or out of service.  
Run and list any BERT set tests.  
Select whether or not the system can be monitored remotely.  
This section allows you to gather statistical information on Hunt group usage.  
• Remote montr  
Usage metrics  
Compact ICS 4.1 Programming Record  
P0906186 Issue 02  
 
Meridian, Norstar, and Companion are trademarks of Nortel Networks Corporation.  
Meridian Norstar Business Communication System is manufactured by Nortel Networks Corporation.  
This document is for use with Norstar Compact ICS 4.1.  
© 1999 Nortel Networks Corporation  
All rights reserved  
P0906186 Issue 02  
Printed in Canada  
 

MSi Computer Hardware MS 6834B User Manual
Murray Lawn Mower 425015x92A User Manual
National Instruments Switch NI USB 6221 User Manual
NETGEAR Network Card XAV1601 User Manual
Nokia Stereo System DKU 5 User Manual
NuVision Graphics Tablet TM1318 User Manual
Onkyo CD Player CDR 205X User Manual
Palsonic Flat Panel Television PDP3280HD User Manual
Panasonic Camera Accessories AK HRP200G User Manual
Parrot Bluetooth Headset MK6100 User Manual