Omron Healthcare Blood Pressure Monitor HEM 711 User Manual

R
INSTRUCTION MANUAL  
Automatic Blood Pressure Monitor  
with IntelliSense™  
For Customer Service  
Call Toll Free  
1-800-634-4350  
Model  
HEM-711  
A
O
U
D
T
E
O
L H  
M
M
A
E
T
IC  
-7  
11  
B
L
O
O
M
D
P
R
E
S
S
U
R
E
SYSTOLIC  
M
O
N
IT  
O
R
D
IA  
S
T
O
LIC  
R
EAD  
M
EASURE  
Y TO  
R
E
T
P
E
LA  
R
B
A
C
E
S
T
IE  
P
R
PULSE/min  
O
G
R
E
S
S
ON/OFF  
Manufactured by OMRON  
Distributed by:  
START  
OMRON HEALTHCARE, INC.  
300 Lakeview Parkway  
Vernon Hills, Illinois 60061  
Copyright © 2001 OMRON HEALTHCARE, INC.  
711INST  
 
INTRODUCTION  
NOTES ON SAFETY  
The warning signs and the sample icons shown here are listed for you to use the product safely and  
correctly as well as to prevent the risk and the damage to you and others from happening.  
The icons and meanings are as follow.  
Thank you for purchasing the Omron Automatic Blood Pressure  
Monitor with IntelliSense, HEM-711. Although your blood pressure  
fluctuates throughout the day, no self-adjustment is necessary as  
the monitor intelligently adjusts to your changing conditions. The  
IntelliSensemonitor uses fuzzy logic intelligence to sense both  
your systolic and diastolic blood pressure values, and the result is  
personalized inflation with every reading. Arm discomfort and  
misreading due to improper cuff inflation are virtually eliminated.  
Warning sign  
Contents  
Indicates matters in which bodily harm or material damage* may arise as a result  
of incorrect handling.  
Caution  
* Material damage refers to a wide range of damage involving your house, household  
goods, domestic animals, and pets.  
Examples of signs  
The  
icon indicates prohibitions (what you cannot do).  
Matters involving actual prohibitions are indicated by text or pictures in or near  
left icon refers to "prohibition to disassemble".  
. The  
The  
icon indicates something compulsory (always follow). Matters involving actual  
Your new OMRON monitor uses the oscillometric method of blood  
pressure measurement. This means the monitor detects your  
blood's movement through your brachial artery and converts the  
movements into a digital reading. At the push of a button, the monitor  
automatically fills the cuff with air, starts deflation, then displays  
your systolic, diastolic, and pulse readings on an extra large display  
panel.  
compulsory actions are indicated by text or pictures in or near  
"general compulsion".  
. The left icon refers to  
Caution  
Self-diagnosis of measured results and treatment are dangerous.  
Please follow the instructions of your doctor.  
Do not use the unit on infants or persons who cannot express one's  
intention.  
Please read this instruction manual thoroughly before using  
this unit. For specific information on your own blood pressure,  
CONTACT YOUR PHYSICIAN.  
Do not use the unit for any purpose other than measuring blood  
pressure.  
Do not use a cellular phone near the unit.  
Improper operation may result.  
Do not disassemble, repair, or remodel the main unit or the arm cuff of  
the blood pressure monitor.  
The battery liquid may leak and damage the main unit. Please observe the following points.  
When you are not going to use the unit for a long period of time (approximately three  
months or more), take out the batteries.  
Replace the worn batteries with new ones immediately.  
Do not use worn and new batteries together.  
Do not insert the batteries with their polarities in wrong direction.  
Do not force to bend the arm cuff or the air tube excessively.  
When removing the air tube, pull at the connector.  
Do not apply strong shock or drop the main unit.  
Do not inflate the arm cuff without it being wrapped on the arm.  
5
4
 
QUICK REFERENCE GUIDE  
KNOWYOUR UNIT  
1. Avoid eating, smoking, and exercising for at least 30 minutes  
before taking a measurement.  
Heart Symbol  
Systolic Blood  
Pressure Display  
2. Remove tight-fitting clothing from your upper arm.  
R
O
ON/OFF Button  
START Button  
IT  
N
O
M
E
R
U
S
S
E
R
ON/OFF  
3. Sit in a chair with your feet flat on the floor and place your arm  
on a table so that the cuff is at the same level as your heart.  
P
D
O
O
T
U
S
A
LO  
Y
E
R
B
M
D
A
E
IC  
E
T
E
R
M
A
-711  
M
D
TO  
U
L H  
A
E
O
M
REPLACE  
BATTERIES  
GRESS  
PRO  
SYSTOLIC  
START  
4. Put your arm through the cuff loop making sure that the bottom  
edge of the cuff is approximately one-half inch above the elbow  
and that the Green Marker on the cuff is above brachial artery.  
IC  
L
O
T
S
IA  
D
PULSE/min  
1/2 inch  
Memory Call Button  
Air Jack  
Diastolic Blood Pressure Display /  
Pulse Display  
Green Marker  
Air Plug  
(Connects to the air jack)  
5. Pull the end of the cuff so that the entire cuff is evenly tightened  
around your arm and press the hook material firmly against the  
pile side of the cuff.  
6. Press the ON/OFF button.  
Arm Cuff  
7. After the Heart Symbol ( ) appears on the digital panel, press  
the Start button, and remain still until the measurement is complete.  
Air Tube  
Green Marker  
8. When measurement is complete, the monitor displays your blood  
pressure and pulse rate, and automatically deflates the cuff.  
9. Wait 2-3 minutes before taking another blood pressure  
measurement. You may require more rest time between readings  
depending on your individual physiological characteristics.  
Carrying Case  
7
6
 
HOW TO APPLYTHE ARM CUFF  
BATTERY INSTALLATION/REPLACEMENT  
H
U
L
A
E
D
O
M
1. If the cuff is assembled correctly,  
the hook material will be on the  
outside of the cuff loop and the  
metal D-ring will not touch your  
skin.  
IC  
L
O
T
1. Slide the battery cover off in  
the direction of the arrow.  
S
Y
S
LIC  
TO  
IAS  
LS  
U
P
D
2. Install or replace 4 "AA" size  
batteries so the + (positive)  
and (negative) polarities  
match the polarities of the  
battery compartment as  
indicated.  
2. If the cuff is not assembled, pass  
the end of the cuff furthest from  
the tubing through the metal D-  
ring to form a loop. The smooth  
cloth should be on the inside of  
the cuff loop.  
Pile Side Material  
Sewn Hook Material  
3. Replace the battery cover.  
3. Sit in a chair with your feet flat  
on the floor and place your arm  
on a table so that the cuff is at  
the same level as your heart.  
D-Ring  
Notes:  
4. Put your arm through the  
cuff loop. The bottom of  
the cuff should be  
If the Low Battery Indicator  
(
replace all four batteries.  
Long-life alkaline batteries  
are recommended.  
) appears on the display,  
Bottom Edge 1/2 Inch  
approximately 1/2"  
above the elbow. The  
Green Marker on the cuff  
should lie over the  
brachial artery on the  
inside of the arm. Tube  
should run down center of arm  
approximately even with middle  
finger.  
Cuff Tube  
Remove the batteries if the  
monitor will not be used for  
an extended period of time.  
Green Marker  
9
8
 
HOW TO TAKEA READING  
HOW TO APPLYTHE ARM CUFF  
5. Pull the cuff so that the top  
and bottom edges are  
tightened evenly around  
your arm.  
1. Press the ON/OFF button.  
a) All display symbols appear for approximately  
one second.  
b) When the monitor becomes ready to measure,  
the Heart Symbol appears on the display.  
2. Press the START button and  
remain still.  
6. When the cuff is positioned  
correctly, press the sewn  
hook material FIRMLY  
against the pile side of the  
cuff.  
Initial LCD Test  
As the cuff begins to inflate, the monitor  
automatically determines your ideal inflation  
level. Because this monitor detects the pulse  
even during inflation, do not move your arm  
and remain still until the entire measurement  
completes.  
7. Make certain the cuff fits  
snugly around your arm.  
The cuff should make good  
contact with your skin.  
3. Inflation stops automatically and  
measurement is started.  
Ready to Measure  
As the cuff slowly deflates, decreasing  
numbers appear on the display and the Heart  
Symbol ( ) flashes at every heartbeat. In rare  
circumstances, a higher inflation may be  
necessary. In those cases, the monitor  
reinflates the cuff up to 30 mmHg higher than  
initial inflation and restarts the measurement.  
You should be able to fit  
one finger between the  
cuff and your arm.  
Inflation started.  
4. When the measurement is complete,  
the arm cuff completely deflates and  
your blood pressure and pulse rate  
are displayed.  
8. Relax your arm and turn  
your palm upward.  
9. Be sure there are no kinks  
in the air tubing.  
NOTE: The monitor automatically stores blood  
pressure and pulse rate into the memory.  
5. Press the ON/OFF button to turn  
the monitor off.  
NOTE: If you forget to turn the monitor off, it  
will automatically shut itself off after five  
minutes.  
11  
10  
 
HOW TO USE THEMEMORY FUNCTION  
HOW TO TAKEA READING  
This monitor has a memory capable of storing fourteen sets of readings.  
Every time you complete the measurement, the monitor automatically  
stores blood pressure and pulse rate.  
Instructions for special conditions:  
If your systolic pressure is known  
to be more than 220 mmHg,  
push and hold the START button  
until the monitor inflates 30 to 40  
mmHg higher than your suspected  
systolic pressure.  
Push the  
button to recall stored readings while the  
Heart Symbol ( ) is displayed.  
When the memory is holding fourteen sets of readings, the  
oldest set will be deleted to store a new set.  
NOTE: Do not apply more  
pressure than necessary.  
The monitor will not  
inflate above 300 mmHg.  
Last reading  
If you want to stop the  
measurement, push the ON/OFF  
button. The monitor will stop  
inflating and start deflating  
rapidly, then the monitor will  
power off.  
START  
Value before  
the last reading  
Value of fourteen  
readings before  
Continue to press button  
To delete stored readings, press the  
button and the  
Start button at once, then all the readings will be deleted.  
NOTE: You can not delete the stored readings partially.  
START  
Press these two buttons  
at the same time.  
Display of memory deletion  
13  
12  
 
HOW TO USE THE OPTIONAL AC ADAPTER  
TROUBLESHOOTING  
(ACCESSORY ITEM SOLD SEPARATELY)  
To avoid potential damage to the monitor, use only the exclusive  
AC adapter (Model HEM-ADPT1) which can be purchased from:  
Error Indicator  
Cause  
Correction  
Omron Healthcare, Inc.  
300 Lakeview Parkway  
Vernon Hills, IL 60061  
Toll Free Phone #: 1-800-634-4350  
Turn monitor off, wait 2-3 minutes  
and take another measurement.  
Repeat steps listed under "How to  
Take a Reading." If "EE" is displayed  
again, take another measurement  
by pressing and holding the START  
button as instruction page 12 under  
"How to Take a Reading", instructions  
for special conditions.  
Cuff under-inflated.  
Movement during  
measurement.  
To connect AC adapter  
Plug  
1. Insert the AC adapter plug  
into the jack on the side of the  
monitor.  
Turn the monitor off, carefully read  
and repeat steps listed under "How  
to Take a Reading."  
Cuff over-inflated (more than  
300 mmHg).  
2. Insert the AC adapter plug  
into a 120V AC outlet (50 - 60  
cycles).  
Jack  
Option AC Adapter  
To remove the AC adapter  
Battery voltage is excessively Replace all four "AA" batteries with  
low. new batteries.  
To remove the AC adapter, disconnect the adapter plug from the  
AC outlet first and then disconnect the cord from the monitors  
jack.  
NOTE: The monitor is designed not to draw power from the batteries  
Problem caused by abnormal Contact OMRON Customer Service  
memory function. Toll Free 1-800-634-4350  
when the AC adapter is in use.  
If you continue to have difficulty obtaining a reading, call  
OMRON HEALTHCARE CUSTOMER SERVICE TOLL FREE 1-800-634-4350.  
Please tell the representative you have an OMRON Model HEM-711.  
15  
14  
 
CAUTION  
CARE ANDMAINTENANCE  
CAUTION:  
To protect your monitor from damage, please AVOID the following:  
Changes or modifications not expressly approved by Omron Healthcare, Inc.  
could void the users warranty.  
Subjecting your monitor and cuff to extreme temperatures,  
humidity, moisture, and direct sunlight.  
NOTE:  
Folding the cuff and tubing tightly.  
Inflating the monitor over 280 mmHg.  
Disassembling the monitor.  
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)  
This product has been tested and found to comply with the limits for a Class B  
digital device, pursuant to part 15 of the FCC rules.  
These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. The product generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If the product does cause harmful interference to radio or television  
reception, which can be determined by turning the product on and off, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
Subjecting the monitor to strong shocks (for example,  
dropping the monitor on the floor.)  
Do not clean the monitor with volatile liquids.  
THE MONITOR SHOULD BE CLEANED WITH A SOFT,  
DRY CLOTH.  
Reorient or relocate the receiving antenna.  
Increase the separation between the product and receiver.  
Connect the product into an outlet on a circuit different from that to  
which the receiver is connected.  
Do not clean cuff.  
Consult the dealer or an experienced radio/TV technician for help.  
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the interference-causing  
equipment standard entitled "Digital Apparatus", ICES-003 of the Canadian  
Department of Communications.  
Cet appareil numérique respecte les limites de bruits radioeléctriques  
applicables aux appareils numériques de Classe B prescrites dans la norme  
sur le matériel brouilleur: "Appareils Numériques", ICES-003 èdictée par le  
ministre des communications.  
17  
16  
 
FIVE YEAR LIMITED WARRANTY  
SPECIFICATIONS  
Your HEM-711 IntelliSenseAutomatic Blood Pressure Monitor is  
warranted to be free from manufacturing defects for a period of five  
years under normal use. The five year warranty excludes the  
monitor cuff. The cuff is warranted for a one year period. This  
warranty extends only to the original retail purchaser.  
Model:  
HEM-711  
Display:  
LCD Digital Display  
Measurement Range:  
Pressure: 0 to 280 mmHg  
Pulse: 40 to 180/minute  
Pressure: ±3 mmHg or 2% of reading  
Pulse: ±5% of reading  
Accuracy/Calibration:  
Should repair be needed within the warranty period, ship the unit  
prepaid to Omron Healthcare, Inc., 300 Lakeview Parkway,  
Vernon Hills, IL 60061, Attn: Repair Dept., together with $5.00 for  
return shipping and insurance. Be sure to include the model  
number of your unit and your phone number on any  
correspondence.  
Inflation:  
Automatic by electric pump  
Active electronic control valve  
Deflation:  
Rapid Pressure Release:  
Pressure Detection:  
Measurement Method:  
Pulse Wave Detection:  
Power Source:  
Active electronic control valve  
Capacitive pressure sensor  
Oscillometric method  
We will either repair or replace (at our option) free of charge any  
parts necessary to correct defects in the materials or workmanship.  
Capacitive pressure sensor  
4 "AA" batteries or AC adapter (sold separately)  
Approximately 300 uses  
Battery Life:  
The above warranty is complete and exclusive. The warrantor  
expressly disclaims liability for incidental, special, or consequential  
damages of any nature. (Some states do not allow the exclusion or  
limitation of incidental or consequential damages, so the above  
warranty may not apply to you.)  
Operating Temperature/Humidity: 50°F to 104°F (10°C to 40°C)  
30 to 85% RH maximum  
Storage Temperature/Humidity:  
4°F to 140°F (20°C to 60°C)  
10 to 95% RH maximum  
Main Unit Weight:  
Approximately 12.3 oz (350g) not including batteries  
Approximately 4 1/4" (l) x 6 2/3" (w) x 2 3/5" (h)  
(109 mm x 170 mm x 66 mm)  
Any implied warranties arising by the operation of law shall be  
limited in duration to the term of this warranty. (Some states do not  
allow limitations on how long an implied warranty lasts, so the  
above limitation may not apply to you.)  
Main Unit Dimensions:  
Cuff Dimensions:  
Cuff Circumference:  
Accessories:  
Approximately 5 1/2" x 19" (140 mm x 480 mm)  
Fits arm circumference 9" to 13"  
This warranty gives you specific legal rights, and you may have  
other rights which vary from state to state. As a condition to  
operation of your warranty, the enclosed registration card must be  
completed and sent to us within 10 days from the date of purchase.  
Arm cuff, carrying case, instruction manual  
NOTE: These specifications are subject to change without notice.  
*Optional accessories: large cuff (fits arms 13" to 17" in circumference) and small cuff  
(fits arms 7to 9in circumference) are sold separately.  
FOR CUSTOMER SERVICE CALL TOLL FREE:  
1-800-634-4350  
19  
18  
 

MPC Automobile Parts 50 ATD 313186 User Manual
Musical Fidelity Stereo Amplifier M1 DAC User Manual
Nady Systems Microphone 401XQ2HT2LTE4FHE User Manual
NETGEAR Network Router WG602 User Manual
Nortel Networks Cordless Telephone 4075 User Manual
Nortel Networks IP Phone NN40050 107 User Manual
Numark Industries Mixer DM3050 User Manual
Nu Vu Food Saver AMP 12 User Manual
ParaBody Home Gym 8661O2 User Manual
Patriot Products Chipper 10F CSV User Manual