Panasonic Cell Phone KX PR2110 KX PRW120 User Manual
Smartphone Connect Setup Guide  
Premium Design Phone with Smartphone Connect  
Model No.  
KX-PRW110  
KX-PRW120  
Wi-Fi  
KX-PRW110  
KX-PRW120  
What is Smartphone Connect?  
Smartphone Connect is a free app provided by Panasonic that turns your  
smartphone into an extension of your phone system. You can use Smartphone  
Connect to:  
– make and receive landline calls with your smartphone  
– copy data from your smartphone to your phone system  
– and more!  
Plus, you can even use your base unit to extend the range of your existing wireless  
network (see page 6), perfect for larger homes.  
How does it work?  
Your smartphone and your phone system’s base unit communicate with each other  
using your wireless router, allowing you to use phone system features over Wi-Fi.  
 
Smartphone Connect Setup Guide  
5.  
6.  
Enter the password required to access the wireless network and  
then press MOKN.  
Password  
Wait for the base unit to connect to your wireless router. When  
“Connected to” and your wireless router’s SSID are  
Wi-Fi Setup  
displayed, press M  
N to finish.  
Connected to  
Simplified configuration (WPS, DHCP)  
This procedure requires a wireless router that supports WPS. If your wireless router supports  
WPS, make sure the feature is turned on, and locate its WPS button before beginning this  
procedure. The WPS button is typically labelled “WPS” or has two curved arrows on it.  
1.  
2.  
Using one of the handsets supplied with your phone system,  
press MMenuN (right soft key) and then press #523.  
Press MDN or MCN to select “WPS (Easy Setup)” and then  
press MOKN.  
Connect  
Search for Networks  
WPS (Easy Setup)  
3.  
4.  
Press the WPS button on your wireless router and then press  
MOKN on the handset.  
Wi-Fi Setup  
Press WPS button  
on your router  
Wait for the base unit to connect to your wireless router. When  
“Connected to” and your wireless router’s SSID (wireless  
Wi-Fi Setup  
network name) are displayed, press M  
N to finish.  
Connected to  
3
 
Smartphone Connect Setup Guide  
Downloading the Smartphone Connect app  
2
After you have configured the base unit’s Wi-Fi and network settings, you are ready to download  
the Smartphone Connect app. You can download the app directly from your smartphone  
platform’s app download service by searching for “Panasonic Smartphone Connect”. You can  
also find download information at the web page listed below.  
Support page for this product on the Panasonic Global web site  
www.panasonic.net/pcc/support/tel/air  
For information about using the app, refer to the Smartphone Connect App Guide, which is  
available for download from the support page.  
Supported devices  
R iPhone 4, iPhone 4S, iPhone 5, iPad, and iPad mini (iOS 5.0 or later)  
R Devices running Android™ 4.0 or later  
Functionality information  
R The app may not function properly depending on system environment, such as your  
smartphone model, peripherals connected to your smartphone, and the apps installed on your  
smartphone.  
4
 
 
Smartphone Connect Setup Guide  
Starting the app for the first time  
3
After you have installed the Smartphone Connect app on your smartphone, you are ready to start  
the app and register your smartphone to the base unit. Use your smartphone to perform this step.  
1.  
Make sure that your smartphone’s Wi-Fi feature is enabled and  
that your smartphone is connected to the same wireless network  
as your base unit.  
2.  
Start the Smartphone Connect app by tapping its icon (shown  
here on the right).  
3.  
4.  
When prompted to register your smartphone to the base unit, tap  
[Start].  
R Illustrations shown here depict the Android version of the app.  
Confirm  
To begin registering this mobile  
phone to the base unit, tap "Start".  
Cancel  
Start  
Wait for the registration process to be end.  
R The app’s [Keypad] screen will be displayed.  
R You can confirm that your smartphone is connected to the  
base unit.  
iPhone/iPad  
Check the information in the Notifications Centre.  
Android  
Check that  
panel.  
is displayed in the status bar and notifications  
Note:  
R In order to use most of the app’s features, your smartphone needs an active Wi-Fi connection.  
If your smartphone’s Wi-Fi feature is disabled, or if it is configured to suspend (sleep) its Wi-Fi  
connection to save power, you will not be able to make or answer calls.  
5
 
 
Smartphone Connect Setup Guide  
Configuring your base unit as a Wi-Fi range extender  
(Wi-Fi repeater mode)  
If you use your phone system in a large home, you can use the base unit’s built-in Wi-Fi repeater  
mode feature to extend the range of your existing wireless network. This is useful if the wireless  
signal of your wireless router does not cover all areas of your house.  
Should I use Wi-Fi repeater mode?  
Wi-Fi repeater mode is recommended for larger buildings, such as those shown below.  
For smaller buildings, we recommend you do not use Wi-Fi repeater mode.  
Wide, single-storey buildings  
Three-storey buildings  
Note:  
R Do not place the base unit and wireless router too close to each other.  
If they are too close, using Wi-Fi repeater mode can cause the sound to cut out briefly during  
landline calls.  
– For a single-storey building, place the base unit and your wireless router in different rooms,  
at least one room-width away from each other.  
– For a three-storey building, place the base unit and wireless router on different floors.  
R Do not use Wi-Fi repeater mode if you already have a Wi-Fi range extender.  
If you already have a Wi-Fi range extender, using Wi-Fi repeater mode can cause network  
problems such as not being able to access the Internet, and the sound may cut out briefly  
during landline calls.  
6
 
 
Smartphone Connect Setup Guide  
Turning Wi-Fi repeater mode on  
1.  
Using one of the handsets supplied with your phone system,  
press MMenuN (right soft key) and then press #538.  
2.  
Press MDN or MCN to select “On” and then press MOKN.  
Repeater  
On  
Off  
Important information  
R A router is required to use Wi-Fi repeater mode.  
If the router function of your wireless router is not enabled and if there is no other routing  
device connected to your network, Wi-Fi repeater mode will not function.  
R The base unit does not have a router feature.  
Wi-Fi repeater mode allows the base unit to function as a wireless access point. It does not  
replace the functionality of a wireless router, and it does not have a router feature.  
Open source software notice  
R Parts of this product use open source software supplied based on the relevant conditions of  
the Free Software Foundation’s GPL and/or LGPL and other conditions. Please read all  
licence information and copyright notices related to the open source software used by this  
product. This information is available at the following web page:  
www.panasonic.net/pcc/support/tel/air  
At least three (3) years from delivery of this product, Panasonic System Networks Co., Ltd. will  
give to any third party who contacts us at the contact information provided below, for a charge  
of no more than the cost of physically distributing source code, a complete machine-readable  
copy of the corresponding source code and the copyright notices covered under the GPL and  
the LGPL. Please note that software licensed under the GPL and the LGPL is not under  
warranty.  
www.panasonic.net/pcc/support/tel/air  
Software information  
R The End User License Agreement (EULA) for the Smartphone Connect app is available at the  
following web page:  
www.panasonic.net/pcc/support/tel/air  
7
 
Troubleshooting information  
R If you experience any trouble when performing the procedures found in this document, refer  
to the network connection troubleshooting section of the Operating Instructions supplied  
with your phone system.  
R If you experience any trouble when using the Smartphone Connect app, refer to the  
troubleshooting section of the Smartphone Connect App Guide, which is available for  
download from our web site.  
Trademarks  
R Android is a trademark of Google Inc.  
R iPhone and iPad are trademarks of Apple Inc.  
®
R Wi-Fi is a registered mark of the Wi-Fi Alliance.  
R All other trademarks identified herein are the property of their respective owners.  
Other information  
R Design and specifications are subject to change without notice.  
R The illustrations in this document may vary slightly from the actual product.  
R The suffix is omitted from model numbers listed in this document.  
R Please refer to the base unit’s operating instructions for sales department and customer  
support information.  
1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan  
© Panasonic System Networks Co., Ltd. 2013  
*PNQX6094XA*  
*PNQX6094XA*  
PNQX6094XA CC0513MG2063 (E)  
 

Miller Electric Welder RPC IP User Manual
Milwaukee Sander 6080 20 User Manual
MTD Blower 240 688A User Manual
NEC Computer Monitor NLT 15 User Manual
NETGEAR Switch FS516 User Manual
NordicTrack Home Gym NTST07900 User Manual
Nordyne Electric Heater Q4 Series User Manual
Onkyo Radio TX NR900 User Manual
Panasonic Telephone KX G2200A User Manual
Panasonic Telephone KXTGA630 User Manual