Ask the authorized dealer for the installation.
Supported Products (Customer-Provided)
(as of Dec. 2005)
Installation Guide
This product is a camera cover for the below cameras
.
For the latest information, please visit the Panasonic website at
Indoor Use Only (For Ceiling Installation)
Camera Cover
Compatible Cameras
Model No.: BB-HCE481A, BB-HCM381A, KX-HCM280A, KX-HCM280
Additional network camera models may become available for
use with this product.
Model No.
BB-HCA1A-B (Smoke)
Confirm that the following items
are included.
Useful Information
Dust on the camera cover affects the camera's image quality.
·
Especially when the camera is zoomed out at the end, it is difficult
to focus on the object due to the dust on the surface of the camera
cover. Remove the dust and wipe the camera cover with a dry cloth.
Note that wiping a dusty camera cover directly may cause scratch-
ing.
Included Items
Contact your dealer if you have a problem with the
included items.
In BB-HCE481A or BB-HCM381A, setting the automatic focus
·
..........
........................
❑ Camera Cover
1 pc.
❑ Caps
2 pcs.
range to [Normal] prevents the dust from affecting the image quality.
In KX-HCM280A or KX-HCM280, the image quality is improved in
the same way by manually focusing to the far side.
(See the camera's Operating Instructions for the settings.)
The permeability of the camera cover is 36 %. The minimum illumi-
nance of the object is 9 lx in normal mode (without the cover: 3 lx),
and 0.27 lx in color night view mode (without the cover: 0.09 lx).
·
✔
❑ Installation Guide
The camera's indicator or Panasonic logo may be reflected into the
image depending on the location, the indicator setting or the zoom
magnification.
·
..............
(this manual)
1 pc.
In certain zoom magnification, using the camera cover may
decrease the image quality.
·
Before using, remove the protective film. During shipment, the pro-
tective film should remain attached.
·
BB-HCA1A-B (Smoke)
This product is for indoor use only.
Do not install this product outdoors.
Outdoor Installation may cause damage to the device.
Remove the Ceiling Mounting Cover.
Move the Ceiling Mounting Cover to the left until the " " of it
fits to the " " of the main unit.
Remove the Ceiling Mounting Cover by pulling it down.
1
2
Ceiling Mounting Cover
Mark
© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.
KK1205RM0
PQQX14931ZA
|