S P E C
F I L E
ET-PKD75
Ceiling Mount Bracket
Description
This ceiling mount bracket is to be used when mounting DLP™-based projectors to the high
ceiling.
Specifications
Vertical correction angle:
+5°, -17°
Horizontal correction angle:
Dimensions (W x H x D):
±2.5°
509 x 345 x 343 mm
(20-1/32˝ x 13-9/16˝ x 13-1/2˝)
7.5 kg (16.5 lbs)
Weight:
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Digital Light Processing and DLP are trademarks of Texas Instrumets.
Parts
Attachment plate . . . . . . . . . . . . . . . .1
Pole fixer . . . . . . . . . . . . . . . . . . . . . .1
Safety fitting . . . . . . . . . . . . . . . . . . . .1
Washer-fitted screws (M6 x 12) . . . . .29
Washer-fitted screws (M4 x 8) . . . . . . .4
Angle adjuster . . . . . . . . . . . . . . . . . .1
Adjuster pole A . . . . . . . . . . . . . . . . .1
Adjuster pole B . . . . . . . . . . . . . . . . .1
Projector mount bracket . . . . . . . . . . .1
Caution:
Mounting should be done by a qualified technician. Make sure that the mounting (ceiling) area has
sufficient strength. Read the enclosed mounting instructions thoroughly before starting.
Dimensions
The assembled ET-PKD75 with a projector
and the ET-D75LE1 optional lens mounted
Attachment Plate
Ø11 (7/16˝)
Ø49 (1-15/16˝)
Ø43 (1-11/16˝)
29
(1-5/32˝)
237
(9-11/32˝)
175 (6-7/8˝)
220 (8-21/32˝)
149
175
(5-7/8˝) (6-7/8˝)
unit: mm (inch)
(Dimensions given in inches are approximate.)
Note: This illustration is not drawn to scale.
As of September 2004
1
|