Panasonic Smoke Alarm 3378 User Manual

Fire alarm systems  
Addressable  
sounder base  
3378  
High or low sound output  
Three different tones and priority levels  
Connected directly on the COM loop  
General  
Address & Mode setting  
3378 consists of an analog base (a modified  
3312) mounted together with a sounder,  
which gives an ultra slim profile. Two  
flying leads from the sounder are plugged  
into two flying leads from the base. The  
base is thereafter mounted on the sounder in  
the ceiling, so that the detector can be  
plugged in the base. The base is connected  
directly to the COM loop like the base 3312.  
For COM loop address setting, the address  
setting tool 3314 is used. The sounder has  
one address and the detector plugged in the  
base has one address. There are two address  
labels where the address respectively can be  
written.  
3314 is also used to set the mode:  
NORMAL mode:  
Win512 / Win128).  
3378 (3378 in  
2330 mode: Can not be used.  
2312 mode: Can not be used.  
High or low sound output  
The volume is selected via a jumper in the  
sounder (high or low sound output).  
Miscellaneous  
The address setting tool 3314 is connected to  
the COM loop terminals (SA / SB) to set the  
sounder's COM loop address. The detector's  
COM loop address is set in the detector.  
Tones  
Three tones are available:  
Continuous 510 Hz  
3378 is power supplied via the COM loop,  
i.e. the number of sounder bases is  
depending on the other units connected to  
the same COM loop.  
Pulsed (Intermittent) 510 Hz,  
0.5s / 0.5s  
Two-tone (Alternating) 510/610 Hz,  
0.25s / 0.25s  
Two 8 mm spacers are supplied for easier  
access of surface mounted cables to the unit.  
Priority levels  
Three priority levels are available in system  
EBL512 and two in system EBL128. For  
each level an output control expression and a  
tone is programmed (via Win512 / Win  
128). The sounder can, for example, be used  
for pre-warning, fire alarm and general fire  
alarm with a different tone for each type of  
alarm.  
Product applications  
Used in the systems EBL512 (SW version >  
2.2) and EBL128 when a sounder is  
required in the same room as a detector (e.g.  
a hotel room). The sounder base is intended  
for indoor use and in dry premises.  
Panasonic Electric Works Fire & Security Technology Europe AB  
Jungmansgatan 12, SE-211 19 Malmö, Sweden  
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99  
 

Miele Clothes Dryer T 7744 C User Manual
Miele Cooktop KM82 2 User Manual
Multiquip Septic System MQ D206H User Manual
NEC Computer Hardware uPD75P3116 User Manual
NetComm Network Router NB6 NB6W NB6PLUS4 NB6PLUS4W User Manual
Nortel Networks Telephone Accessories M7100N User Manual
Oki All in One Printer 1624n MFP User Manual
Panasonic CRT Television CT 31SF24 User Manual
Paradigm Speaker Paradigm In Wall Subwoofer User Manual
Patton electronic Home Theater Server 1195 User Manual