Panasonic Switch MA3SE020G User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Schottky Barrier Diodes (SBD)  
MA3SE020G  
Silicon epitaxial planar type  
For cellular phone  
Package  
Features  
Code  
High-frequency wave detection is possible  
SSMini3-F3  
Pin Name  
Low forward voltage VF  
Small terminal capacitance Ct  
1: Anode 1  
2: Cathode 2  
3: Cathode 1  
Anode 2  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Reverse voltage  
Maximum peak reverse voltage  
Symbol  
VR  
Rating  
Unit  
V
20  
Marking Symbol: M6B  
VRM  
IF  
20  
V
Forward current  
Single  
35  
25  
mA  
Internal Connection  
Series   
Single  
3
Peak forward  
IFM  
100  
mA  
current  
Series   
70  
Junction temperature  
Storage temperature  
Tj  
125  
°C  
1
2
Tstg  
55 to +125  
°C  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Forward voltage  
Symbol  
Conditions  
Min  
Typ  
Max  
0.40  
1.0  
Unit  
VF1  
VF2  
IR  
IF = 1 mA  
V
IF = 35 mA  
Reverse current  
VR = 15 V  
200  
1.2  
nA  
pF  
Terminal capacitance  
Forward dynamic resistance  
Ct  
VR = 0 V, f = 1 MHz  
rf  
IF = 5 mA  
9
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.  
2. This product is sensitive to electric shock (static electricity, etc.). Due attention must be paid on the charge of a human body  
and the leakage of current from the operating equipment.  
 
3. Absolute frequency of input and output is 2 GHz  
Publication date: October 2007  
SKH00213AED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
MA3SE020G  
SSMini3-F3  
Unit: mm  
1.60 +0.05  
0.26 +0.05  
0.03  
0.02  
3
1
2
0.13 +0.05  
0.02  
(0.50)  
(0.50)  
1.00 0.05  
(5°)  
SKH00213AED  
 
3
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Milwaukee Drill 4202 User Manual
National Instruments Tool Storage Toolkit User Manual
NDC comm Stereo System NWA0518 User Manual
Nikon Camcorder d2xmode1 User Manual
Nostalgia Electrics Frozen Dessert Maker RSM 602 User Manual
OmniWare Scanner Pro 12 ScanSoft User Manual
Onkyo Stereo System PA MC5500 User Manual
Oricom Telephone TP68 User Manual
Palsonic CRT Television 3499 User Manual
Paradyne Network Card UIM 10 100 User Manual