Parker Hannifin Home Security System AR 04CE User Manual

Compliance  
UL Recognized Component, 508c  
Aries  
Controller  
Product Type . . . . . . . . . . . . . . . . . Aries AR-04CE, AR-08CE, and AR-13CE  
Quick Reference Guide  
Aries AR-04CE, AR-08CE, and AR-13CE Servo Drive/Controllers  
The above equipment conforms with the protection requirements of Council Directive  
89/336/EEC (EMC Directive) as amended by Directive 92/31/EEC on the approximation of the  
laws of the Member States relating to Electromagnetic Compatibility when installed, operated,  
and maintained as intended. Also, the above equipment conforms with the requirements of  
Council Directive 73/23/EEC (Low Voltage Directive) as amended by 92/59/EEC, and CE  
Marking Directive 93/68/EEC, provided the installation requirements described in the  
Aries-ACR Drive/Controller Hardware Installation Guide are met, when installed, operated,  
and maintained as intended.  
Aries Controller  
Customer PC  
Ethernet Cable  
In accordance with IEC 61800-3:1997 (adjustable-speed electrical power drive systems) this  
product is of the restricted sales distribution class which meets the needs of an industrial  
environment when installed as directed. However, further measures may need to be taken for  
use of the product in a domestic environment.  
Motor Feedback  
Cable  
The installation requirements are detailed in the Information supplied with the equipment. The  
equipment is sold only to competent system builders.  
Control Power  
Cable  
Safety Warning!  
!
!
Motor Power  
Mains Cable  
High-performance motion control equipment is capable of producing rapid movement and  
very high forces. Unexpected motion may occur especially during the development of controller  
programs. KEEP WELL CLEAR of any machinery driven by servo motors. Never touch any part  
of the equipment while it is in operation.  
Motor  
Cable  
This product is sold as a motion control component to be installed in a complete system  
using good engineering practice. Care must be taken to ensure that the product is installed and  
used in a safe manner according to local safety laws and regulations. In particular, the product  
must be positioned so that no part is accessible while power may be applied.  
R-Clamp snugly  
attached to braided  
shield  
Motor  
This and other information from Parker Hannifin Corporation, its subsidiaries, and authorized  
distributors provides product or system options for further investigation by users having tech-  
nical expertise. Before you select or use any product or system, it is important that you analyze  
all aspects of your application and review the information concerning the product in the current  
product catalog. The user, through its own analysis and testing, is solely responsible for making  
the final selection of the system and components and assuring that all performance, safety, and  
warning requirements of the application are met.  
Electromechanical Division  
Parker Hannifin Corporation  
p/n 88-028905-01A  
Effective: October 2007  
If the equipment is used in any manner that does not conform to the instructions given in this  
user guide, then the protection provided by the equipment may be impaired.  
 

Miele Microwave Oven M 8201 1 User Manual
Miele Ventilation Hood DA5341D User Manual
MTD Doll 26J User Manual
MTD Lawn Mower 820 829 Series User Manual
Multiplex Technology DVR 4CH H264 User Manual
Nikon Camera Lens NIK2180 User Manual
NordicTrack Treadmill NTL070072 User Manual
Onkyo Marine GPS System PR SC5507 User Manual
Palm Network Card ETHERNET HUB User Manual
Panasonic Vacuum Cleaner MC CG902 User Manual