PMI Phoenix Speaker PX1122M User Manual

Phoenix Series  
Loudspeaker  
User Instructions  
Safety First  
The Electro-Voice® PX1122M, PX1152M, PX2122, and PX2152 have threaded points that can be used for suspension.  
Please consult the user instructions that are supplied with the suspension kits for proper use prior to installation.  
WARNING: Suspending any object is potentially dangerous and should only be attempted by individuals who have a  
thorough knowledge of the techniques and regulations of rigging objects overhead. Electro-Voice® strongly  
recommends that all speakers be suspended taking into account all current national, federal, state and local regulations.  
It is the responsibility of the installer to ensure that all speakers are safely installed in accordance with all such  
regulations. If Phoenix speakers are suspended, Electro-Voice® strongly recommends that the system be inspected at  
least once a year. If any sign of weakness or damage is detected, remedial action should be taken immediately. Any  
hardware used to suspend a Phoenix speaker that is not associated with Electro-Voice® is the responsibility of others.  
Ground Stack:  
When using multiple Electro-Voice® Phoenix speakers  
in a ground stack configuration, the feet of each  
enclosure is designed to fit into grooves of the enclosure  
below it. This is both for the safety of the ground stack  
and serves as an alignment for properly arraying multiple  
loudspeakers. Always check that the feet are resting in  
the grooves when using multiple speakers (Figure 1).  
Unless you can safely lift the weight of the loudspeaker  
Foot on Bottom  
of Second  
Enclosure  
on to the ground stack, have another person to help you  
place it. The ground stack should be placed on a solid,  
Groove on Top  
of First  
level surface. When using subs on a surface that is hard  
or slick, use a piece of carpet or other material between  
the feet and supporting surface to prevent the subs (and  
stacks) from “walking”. When using a ground stack in  
windy outdoor conditions, when the surface is slippery, or  
Enclosure  
when  
in  
adverse  
conditions,  
Electro-Voice®  
recommends using a ratchet strap to secure the  
speakers. For a complete list of the configurations  
possible with an Electro-Voice® Phoenix system, please  
Figure 1: Groundstacking Configuration  
Stand Mount:  
The Electro-Voice® PX1122M and PX1152M include 1-3/8" stand mounts for use with tripod stands. Check the  
specifications of the speaker stand to be certain it is capable of supporting the weight of the speaker. Place the speaker  
stand on a flat, stable surface and be sure to fully extend the legs of the stand. Do not try to make the stand “taller” and  
compromise its structural integrity. Do not attempt to suspend more than one speaker on a stand designed for a single  
speaker. Unless you are confident that you can safely handle lifting the weight of the speaker onto the stand, ask another  
person to help you place it. Route cables and position the stand so that performers, production crew and audience  
members will not trip over the stand or cables and pull the speaker system over. Secure the cables with wire ties or tape  
whenever possible.  
Moisture:  
Electro-Voice® does not recommend using Phoenix loudspeakers in the rain or in high moisture environments without  
protection.  
Hearing Exposure:  
Electro-Voice® Phoenix loudspeakers are capable of producing sound pressure levels sufficient to produce permanent  
hearing damage. Caution should be taken to avoid prolonged exposure to sound pressure levels exceeding 90 dB.  
Processor Settings:  
Processor settings for Phoenix loudspeaker configurations are available for Electro-Voice® speaker processors. Please  
 
Technical Specifications:  
PX1122M  
PX1152M  
PX2122  
PX2152  
PX2181  
Freq. Response1 (-3 dB):  
Freq. Range1 (-10 dB):  
Rec. Hipass Frequency:  
Axial Sensitivity1:  
Max Calculated SPL1:  
Horizontal Coverage:  
Vertical Coverage:  
70 Hz - 15 kHz  
55 Hz - 19 kHz  
50 Hz  
TBA  
TBA  
TBA  
TBA  
TBA  
90 Hz - 11 kHz  
70 Hz - 18 kHz  
80 Hz  
60 Hz - 11 kHz  
50 Hz - 18 kHz  
40 Hz  
45 Hz - 160 Hz  
40 Hz - 180 Hz  
35 Hz  
98 dB (1W/1m)  
132 dB  
102 dB (1W/1m)  
101 dB (1W/1m)  
105 dB (1W/1m)  
141 dB  
138 dB  
90°  
45°  
30°, or 45°  
45°, or 30°  
60°, or 45°  
45°, or 60°  
Omnidirectional  
Omnidirectional  
Power Handling  
(Passive):  
1200W Continuous, 4800W  
Peak  
600W Continuous, 2400W Peak  
500W Continuous, 2000W Peak  
N/A  
N/A  
LF Power Handling  
(Biamp):  
1000W Continuous, 4000W Peak  
HF Power Handling  
(Biamp):  
80W Continuous, 320W Peak  
N/A  
(1) DVX3121, 12 in.  
(305 mm) Driver  
(2) DVX3121, 12 in.  
(305 mm) Driver  
(2) DVX3150, 15 in.  
(381 mm) Driver  
(2) DVX3180, 18 in.  
(457 mm) Driver  
LF Transducer:  
TBA  
HF Transducers:  
Crossover Frequency:  
Impedance (Passive):  
LF Impedance (Biamp):  
HF Impedance (Biamp):  
Connectors:  
(2) ND2-16, 2 in. (50mm) Diaphragm Compression Drivers  
1400 Hz  
TBA  
1600 Hz  
N/A  
1900Hz  
80 Hz - 125 Hz  
N/A  
8 Ohms Nominal  
4 Ohms Nominal  
4 Ohms Nominal  
8 Ohms Nominal  
8 Ohms Nominal  
N/A  
N/A  
(3) Neutrik Speakon NL4's  
(2) Neutrik Speakon NL4's  
Enclosure Material:  
Suspension:  
18mm Plywood with Black EVCoatTM  
Rigging Point for PX-SAM Strong-Arm Accessory  
(8) M10 Points - (6) on Top and (2) on Bottom of Enclosure  
Grille:  
Polyester Powder Coated, 16GA Galvanized Steel, with Rotatable Logo  
546mm x 366mm x 305mm  
(21.50" x 14.42" x 12.04")  
1219mm x 457mm x 445mm  
(48.00" x 18.00" x 17.50")  
1219mm x 569mm x 758mm  
(48.00" x 22.42" x 29.85")  
Dim (H x W x D):  
TBA  
Net Weight:  
Shipping Weight:  
23.1 kg (51 lbs)  
25.2 kg (56 lbs)  
TBA  
TBA  
50.9 kg (112 lbs)  
53.1 kg (117 lbs)  
45.6 kg (100.5 lbs)  
47.9 kg (105.5 lbs)  
88.5 kg (195 lbs)  
90.7 kg (200 lbs)  
Recommended Amplifier:  
Electro-Voice® CP3000S  
Electro-Voice® CP4000S  
PX-D1 Dolly Kit  
Accessories:  
PX-SAM Strong-Arm Kit  
PX-G1 Phoenix Grid  
EBK-M10 Eyebolt Kit  
PX-D2 Dolly Kit  
1 Half Space measurement.  
U.S.A. and Canada only. For customer orders,  
contact the Customer Service department at  
800/392-3497 Fax: 800/955-6831  
12000 Portland Avenue South, Burnsville, MN 55337  
Phone: 952/884-4051, Fax: 952/884-0043  
Europe, Africa and Middle East only. For customer orders,  
contact the Customer Service department at  
49 9421-706 0 Fax: 49 9421-706 265  
© Telex Communications, Inc. 6/2006  
Part Number 38110-533 Rev 2  
For warranty information, contact the Service Repair department at:  
616/695-6831 or 800/685-2606  
For technical assistance, contact Technical Support at:  
866/78AUDIO  
Specifications subject to change without notice.  
 

Pelco Security Camera C626M B User Manual
Philips Car Video System SDV7225T 55 User Manual
Philips Cell Phone CTM600RED User Manual
Pinnacle Speakers Portable Generator DEKO500 User Manual
Pioneer Car Stereo System AVR W6100 User Manual
Pioneer Stereo System VSX 518 K User Manual
Planar Computer Monitor PV150 User Manual
Polk Audio Speaker PSW202 User Manual
POSIFLEX Business Machines Computer Monitor LM 6200 User Manual
Poulan Tiller 163760 User Manual