Peavey Speaker 115MX User Manual

P E A V E Y E L E C T R O N I C S  
SPECS  
SP115MX  
SPECIFICATIONS  
Frequency response, 1 meter on-  
axis, swept-sine in anechoic  
environment:  
100 Hz - 14 kHz ( 3 dB)  
Usable low frequency limit  
(-10 dB point):  
66 Hz  
Power handling:  
Full Range:  
500 W continuous  
1,000 W program  
2,000 W peak  
Low Frequency Section:  
500 W continuous  
1,000 W program  
2,000 W peak  
High Frequency Section:  
60 W continuous  
120 W program  
240 W peak  
Sound pressure Level, 1 Watt,  
High Frequency Section:  
1x .875 in. exit/51mm voice coil  
compression driver on CD horn  
RX22 on a CH®-3  
1 meter in anechoic environment:  
Full Range:  
99.0 dB SPL, (2.83 V input)  
Low Frequency Section:  
100.0 dB SPL, (2.83 V input)  
High Frequency Section:  
106.0 dB SPL, (2.83 V input)  
Recommended active crossover  
frequency region and slope:  
Low Frequency - High Frequency:  
1,600 Hz at 18 dB/octave  
Harmonic distortion:  
1% rated power  
2nd Harmonic:  
Time offset:  
Low Frequency:  
High Frequency:  
0.00 ms  
0.25 ms  
100 Hz:  
1 kHz:  
0.61%  
0.39%  
Maximum sound pressure level  
(1 meter):  
Full Range:  
126.0 dB SPL continuous  
132.0 dB SPL peak  
Low Frequency Section:  
127.0 dB SPL continuous  
133.0 dB SPL peak  
Impedance (Z):  
Full Range:  
3rd Harmonic:  
100 Hz:  
1 kHz:  
Nominal:  
Minimum:  
8.0 Ω  
6.4 Ω  
0.49%  
0.39%  
Low Frequency:  
Nominal:  
Minimum:  
10% rated power  
2nd Harmonic:  
8.0 Ω  
7.1 Ω  
100 Hz:  
1 kHz:  
1.30%  
1.44%  
High Frequency:  
High Frequency Section:  
123.8 dB SPL continuous  
129.8 dB SPL peak  
Nominal:  
Minimum:  
8.0 Ω  
7.1 Ω  
3rd Harmonic:  
100 Hz:  
1 kHz:  
2.80%  
0.71%  
Input Connections:  
Transducer complement:  
Low Frequency Section:  
1x 15 in. woofer, sealed  
1508-8 HE BWX  
2x 1/4 in. phone jack and 1x Neutrik®  
NL4 Speakon® (bi-amp only)  
Crossover frequency (internal  
passive):  
Low Frequency - High Frequency:  
1,350 Hz  
 
minimum amplifier headroom of 3 dB.  
The nominal radiation geometry shall be  
45 degrees in the horizontal plane and 90  
degrees in the vertical plane. The outside  
dimensions shall be 15.25 inches high by  
24.50 inches wide by 16.00 inches deep.  
The weight shall be 57 pounds. The  
loudspeaker system shall be a Peavey  
model SP 115MX.  
Architectural & engineering  
specifications  
3 + 2 YEAR LIMITED WARRANTY  
NOTE: For details, refer to the  
warranty statement. Copies of  
this statement may be obtained  
by contacting Peavey Electronics  
Corporation, P.O. Box 2898, Meridian,  
Mississippi 39301-2898.  
The loudspeaker system shall have an  
operating bandwidth of 100 Hz - 14 kHz.  
The nominal output level shall be 99.0 dB  
when measured at a distance of one  
meter with an input of one Watt. The  
nominal impedance shall be 8.0 Ohms.  
The maximum continuous power handling  
shall be 500 Watts, maximum program  
power of 1,000 Watts and a peak power  
input of at least 2,000 Watts, with a  
Harmonic Distortion : 10% Rated Power  
120  
110  
100  
90  
80  
70  
60  
50  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
2nd Harmonic  
3rd Harmonic  
Figure 3  
Harmonic Distortion : 1% Rated Power  
110  
100  
90  
80  
70  
60  
50  
40  
20  
50  
100  
200  
500  
1k  
2k  
5k  
10k  
20k  
Frequency (Hz)  
2nd Harmonic  
3rd Harmonic  
Figure 4  
 
SP115MX INPUT  
Features and specifications subject to change without notice.  
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301  
©2001  
Printed in the U.S.A. 5/01  
80304857  
 

Peavey Guitar Horizon User Manual
Peavey Portable Speaker Quadra 10 User Manual
Phantom Tech Power Supply HCPH040000 User Manual
Philips Digital Camera SPC 300NC User Manual
Philips Indoor Furnishings PL T57W User Manual
Pioneer Car Stereo System MEH P6550 User Manual
Pioneer DVD Player CLD V2600 2400 LEVEL User Manual
Polycom Server DOC2559C User Manual
Pride Mobility Mobility Aid INFINFB2048 User Manual
Proson Home Theater System rv2600 dts User Manual