Installation and Assembly- Encore™ Projector Mount
Protected by U.S. Patent No. 6,042,068
Model: PJRL411
This product contains all mounting hardware for direct attachment to a wood joist
ceiling. Concrete anchors (accessory kit ACC200, see page 2) sold separately.
IMPORTANT! Read entire
instruction sheet before you
start installation and assembly.
This product is to be used in combination with one of several Projector Adapter
Plates (PAP models).
WARNING! Installer must verify
that the ceiling will safely
support the combined weight of
the Base Unit, Projector Adapter
Plate, and video projector.
To order Projector Adapter Plates, Extension Columns, or additional mounting
hardware call customer service at 1-800-729-0307 or 708-865-8870.
Before you start check the parts list below to make sure all of the parts shown
are included.
This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.
Peerless Industries, Inc., 1980 Hawthorne Avenue, Melrose Park, IL 60160
R
A
Parts List
Description
Part Number
Qty.
*
A
B
projector mount ceiling plate
054-1003
1
2
washer head wood screw
#14 x 2.5 (6mm x 65mm)
5S1-015-C03
C
M6 x 1 x 20mm socket head screw
w/ flat and lock washer
security allen wrench
M5 x .8 x 8mm socket pin screw
main bracket assembly
fiber washer
520-1029
9
D
E
F
G
H
I
560-9646
520-1062
054-1044
540-9432
1800-375
520-1164
054-1050
055-1251
1
2
1
1
1
3
1
1
retaining collar
J
M5 x .8 x 10mm socket pin screw
roll adapter bracket
J
K
interface bracket
Note: Actual parts may appear slightly different than illustrated.
Four .406 dia. holes provided for threaded rod
installations. Materials and procedure for such
installations are the sole responsibility of the installer.
F
*
K
B
D
E
C
I
G
H
Parts G, H, and I are used only for installations that
©2003PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
EncoreisatrademarkofPeerlessIndustries,Inc.
incorporate an extension column.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
1 of 5
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03
For customer service call 1-800-729-0307 or 708-865-8870.
Extension column applications only:
ceiling plate
(sold separately)
Insert end of extension column into threaded fitting in
ceiling plate. Tighten securely - four or five complete
turns. Align slot in extension column with one of the
small holes in the side of the threaded fitting. Insert
and tighten one M5 x .8 x 10mm socket pin screw ( I )
into hole to lock extension column to threaded fitting.
Tighten screw allen wrench (D).
threaded
fitting
I
slot
WARNING:Forsafety, extensioncolumnmustbe
locked to threaded fitting with screw ( I )!
extension
column (sold
separately)
Attach projector mount ceiling plate (A) with fiber
washer (G) and retaining collar (H). Tighten retaining
collar securely, four or five complete turns, aligning
one hole in the side of retaining collar with slot in the
end of extension column. From inside insert and
tighten one M5 x .8 x 10mm socket pin screw ( I ) into
hole in retaining collar. Tighten screw with allen
wrench (D).
A
Note: You may need to thread the socket pin screw
from the outside first (approximately 3 turns) to
loosen any buildup that may be on the threads.
I
G
H
WARNING:Forsafety, retainingcollarmustbe
locked to extension column with screw ( I )!
Attach roll adaptor bracket (J) to ceiling plate (A) using four M6 x 1 x 20mm socket head security screws (C).
Tighten using 4mm allen wrench provided. Next attach main bracket (F) using remaining fasteners (C). Tighten
using 4mm allen wrench provided.
IMPORTANT: Do not lose or dispose of allen wrench.
It will be required to attach the Projector Adapter Plate.
NOTE: Arrow indicates front of main bracket (F).
A
C
J
F
3 of 5
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03
For customer service call 1-800-729-0307 or 708-865-8870.
Note: Attach adapter plate to projector (see PAP instructions) prior to proceeding to step 5
Note: The Projector Adapter Plate and projector you are installing may differ in appearance from the sample illustrated
below.
K
Place interface bracket (K) on top of adapter
plate as shown.
NOTE: # Notch on interface bracket indicates front of projector.
*Notch on adapter bracket indicates front of projector.
Rotate interface bracket until the two holes line up with two holes
on adapter plate. Make sure that both front of interface bracket (K)
and projector adapter plate are closely aligned.
#
*
Fasten interface bracket (K) to adapter plate using two
M5 socket-pin screws (E). Tighten screws (E) using
4mm allen wrench (K).
E
4 of 5
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03
For customer service call 1-800-729-0307 or 708-865-8870.
SECURITY OPTION
Position four tabs in interface bracket (K) behind four
tabs in base unit. Slide forward to engage latch. BE
SURETHATLATCHISENGAGED!
Lock the latch by tightening M6 x 1 x 20mm socket
head security screw (C) through hole in base unit,
into threaded hole in latch. Tighten using 4mm
allen wrench.
WARNING:
Do not lift more weight than you can handle! Use
additional man power or mechanical lifting
equipment to safely handle placement of the
videoprojector!
IMPORTANT: Allen wrench is your key for projector
removal. Store it in a safe place.
ceiling
(cutaway)
ceiling
(cutaway)
latch
K
C
latch
Final Alignment
To adjust Yaw (swivel) for flush mounting applications: Loosen wood screws until projector mount can be rotated.
Rotate mount to desired position and retighten screws.
To adjust Yaw (swivel) for extension column applications: Rotate mount to desired position. Insert and tighten one
remaining socket pin screw ( I ) into tab in projector mount ceiling plate (A) as shown below.
To adjust pitch (forward and backward tilt), loosen the two screws on each side of the main bracket assembly (F).
Tilt mount to desired position and tighten screws.
To adjust roll (side to side tilt), loosen the two screws on each side of the roll adapter bracket (J). Tilt mount to
desired position and tighten screws.
I
Peerless offers several Projector Mounts to fit various video projectors. New Projector Mounts are continually being
developed to meet the demands of a growing projector market. To find out if a mount is available for your particular
projector call Peerless customer service at 1-800-729-0307 or 708-865-8870.
5 of 5
ISSUED: 09-09-02 SHEET #: 054-9122-3 11-11-03
For customer service call 1-800-729-0307 or 708-865-8870.
|