DX8100 DVR
DX9200HDDI SUPPORT LIMITATIONS
October 23, 2006
Tech Tips
Helpful Tips for Pelco Products
DX9200HDDI WORKS WITH DX8108 AND DX8116
There has been confusion recently as to whether the DX9200HDDI is compatible with the DX8100.
A SCSI card recently qualified that works with the DX8100 and DX9200HDDI, however, due to hard-
ware limitations the card only works with the DX8108 and DX8116 units.
NOTE: The DX9200HDDI does not work with the DX8124 and DX8132 because these units
do not have a viable slot available for the SCSI card.
To connect the DX9200HDDI to the DX8100 do the following:
1. Install the optional DX8100-ISCI internal SCSI interface card in slot 2.
2. Move the main Capture card to slot 3.
This procedure will be covered in detail in the DX8100-ISCI Installation manual.
World Headquarters
Pelco and the Pelco logo are registered trademarks of Pelco.
Information subject to change without notice.
©Copyright 2006, Pelco. All rights reserved.
3500 Pelco Way, Clovis, California 93612 USA
USA & Canada Tel: 800/289-9100 Fax: 800/289-9150
International Tel:1-559/292-1981 Fax:1-559/348-1120
Page 1 of 1
DX8100_DX9200HDD1.fm
|