Pelco Flat Panel Television PMCL219 User Manual

I N S T A L L A T I O N / O P E R AT I O N  
200 Series Flat Panel  
LCD Monitors  
C2925M-B (12/06)  
 
Contents  
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Desktop Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Rear Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Video and Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
OSD Control Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Display Adjust Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Color Temperature Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
OSD Adjust Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Audio Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Supported Input Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
List of Illustrations  
1 Rear Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
2 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
3 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
4 Display Adjust Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
5 Color Temperature Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
6 OSD Adjust Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
7 Audio Control Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
C2925M-B (1/07)  
3
 
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one blade wider than the  
other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the points where they exit from  
the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury from tip-over.  
13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as  
power-supply cord or plus is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
14. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the  
apparatus.  
15. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.  
16. Installation should be done only by qualified personnel and conform to all local codes.  
17. Unless this unit is specifically marked as NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not  
be installed where exposed to rain and moisture.  
18. Use only installation methods and materials capable of supporting four times the maximum specified load.  
19. Only use replacement parts recommended by Pelco.  
20. Avoid touching the screen directly with your fingers as the oils from your skin may be difficult to remove from the LCD.  
21. Do not apply direct pressure on the screen.  
22. Keep the monitor in a dust-free environment and away from strong electromagnetic fields.  
23. Do not use attachments, such as mounts, that are not recommended by Pelco. They may be hazardous.  
24. Do not place the monitor on an unstable stand, bracket, or mount. The unit may fall, causing serious damage to the unit or injury to a  
person. Only use mounts recommended by Pelco.  
25. A CCC-approved power cord must be used to power this equipment when used in China.  
The product and/or manual may bear the following marks:  
This symbol indicates that dangerous voltage constituting a risk of electric shock is present  
within this unit.  
CAUTION:  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
This symbol indicates that there are important operating and maintenance instructions in  
the literature accompanying this unit  
4
C2925M-B (1/07)  
 
Regulatory Notices  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  
RADIO AND TELEVISION INTERFERENCE  
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio  
communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This  
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.  
Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this  
equipment under Federal Communications Commission’s rules.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
C2925M-B (1/07)  
5
 
Description  
The 200 Series LCD monitors provide high resolution display of VGA signals. These 17- and 19-inch monitors use a color, thin film transfer (TFT)  
active matrix 1280 x 1024 LCD panel that automatically adapts to the appropriate input resolution.  
The 200 Series’ ergonomic design, autoranging internal power supply, and low power consumption, combined with quick panel response time to  
minimize ghosting in motion video, make the 200 Series an ideal choice for use with any DVR (digital video recorder) or PC application.  
In addition, the 200 Series features a folding picture frame-style desktop stand, optional rack mount kits, and VESA®-compliant mounting holes  
to easily adapt to the available wall mount.  
Adjustments of standard monitor display parameters are made using user-friendly, on-screen menus and front panel controls.  
MODELS  
PMCL217  
17-inch (432 mm) active TFT LCD monitor  
19-inch (483 mm) active TFT LCD monitor  
PMCL219  
PACKAGE CONTENTS  
1
1
1
1
1
1
17- or 19-inch TFT LCD monitor  
VGA cable with 15-pin, D-sub connector  
US standard power cable  
EU standard power cable  
Sound cable  
Installation/Operation manual  
TFT LCD MONITOR  
INSTALLATION  
OPERATION MANUAL  
VGA CABLE W/15 PIN  
D-SUB CONNECTOR  
SOUND CABLE  
US STANDARD  
POWER CABLE  
EU STANDARD  
POWER CABLE  
6
C2925M-B (1/07)  
 
Installation  
The monitor can be placed on any flat surface (desk or table), or it can be rack mounted or wall mounted.  
NOTE: Only use a recommended rack mount kit, such as PMCL-RM17, PMCL-RM19, or PMCL-WM. To rack-mount the monitor, follow the  
instructions supplied with the rack mount kit. Refer to manual C2220M for rack mount kit instructions or C2219M for wall mount kit instructions.  
DESKTOP STAND  
You can manually adjust the 200 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor.  
REAR PANEL CONNECTORS  
Figure 1. Rear Panel Connectors  
1. AC IN: Can be connected to a 100-240 VAC, 50/60 Hz source.  
2. VGA IN: Can be connected to the VGA cable (supplied).  
3. AUDIO IN: Can input stereo audio from any sound source.  
4. Speakers: The unit has two built-in speakers.  
VIDEO AND POWER CONNECTIONS  
Refer to Figure 1 for video, audio, and power connections.  
1. Connect a PC or DVR to VGA IN on the back panel of the monitor.  
2. Connect audio. Connect the audio cable from the stereo output source to the AUDIO IN connection on the back panel.  
3. Connect power. Plug the provided power cord into the AC IN connection on the back panel. Plug the other end of the cord into a power  
receptacle.  
C2925M-B (1/07)  
7
 
 
Operation  
FRONT PANEL CONTROLS  
CH  
ᕡ ᕣ ᕥ  
ᕢ ᕤ ᕦ  
ᕧ ᕨ  
Figure 2. Front Panel Controls  
1. Automatically selects the input signal.  
2. Decreases the value of a selected menu item or opens the Volume menu and decreases volume.  
3. Increases the value of a selected menu item or opens the Volume menu and increases volume.  
4. Moves the highlighter downward through a menu.  
5. Moves the highlighter upward through a menu.  
6. Button accesses the pop-up menu and is also used to select a highlighted menu item.  
7. Turns on or off power to the monitor.  
8. Receives the remote control system. Infrared sensor (400 Series monitors only).  
8
C2925M-B (1/07)  
 
OSD CONTROL MENUS  
Unless otherwise noted, the menus are the same for the PMCL217 and PMCL219.  
To use the menus:  
1. Press the menu button to access the Main menu.  
2. Use the up and down arrow buttons to highlight a selection.  
3. Press the menu button to select an item.  
4. Use the left and right arrow buttons to adjust the setting on a selected item.  
MAIN MENU  
MAIN MENU  
VGA IN: 1280x1024  
H.SYNC: -48.3KHz  
V.SYNC: -60.8Hz  
BRIGHTNESS  
CONTRAST  
DISPLAY ADJUST  
COLOR TEMPERATURE  
LANGUAGE  
OSD ADJUST  
AUDIO CONTROL  
RESET  
LANGUAGE  
ENGLISH  
SPANISH / ESPAÑOL  
GERMAN / DEUTSCH  
ITALIAN / ITALIANO  
FRENCH / FRANÇAIS  
RETURN  
EXIT  
Figure 3. Main Menu  
The Main menu is accessed by pressing the menu button on the monitors front panel. After selecting a highlighted item with the menu button,  
use the left and right arrow buttons to adjust the setting.  
Main Menu Field Definitions  
Brightness: Adjusts the black level of the video screen image.  
Contrast: Adjusts the white level of the video screen image.  
Display Adjust: Accesses the Display Adjust menu.  
Color Temperature: Adjusts the color temperature to 9300K, 7500K, 6500K, or User Preset.  
Language: Lets you choose among five languages: English, Spanish, German, Italian, or French.  
OSD Adjust: Accesses the OSD (on-screen display) Adjust menu.  
Audio Control: Accesses the Audio Control menu.  
Reset: Returns all controls to factory settings.  
Exit: Exits the menu system.  
C2925M-B (1/07)  
9
 
DISPLAY ADJUST MENU  
DISPLAY ADJUST  
V-POSITION  
H-POSITION  
PITCH  
050  
080  
050  
058  
000  
PHASE  
SHARPNESS  
AUTO TUNING  
RECALL  
RETURN  
Figure 4. Display Adjust Menu  
Display Adjust Menu Field Definitions  
V-Position: Moves the screen image up or down.  
H-Position: Moves the screen image left or right.  
Pitch: Adjusts image distortion appearing as vertical bars or noise on the screen.  
Phase: Adjusts image distortion appearing as horizontal noise on the screen.  
Sharpness: Adjusts the picture softer or sharper.  
Auto Tuning: Adjusts the above settings automatically for the best display.  
Recall: Restores this submenu’s settings to the factory defaults.  
Return: Takes you back to the Main menu.  
COLOR TEMPERATURE MENU  
COLOR TEMPERATURE  
9300K  
7500K  
6500K  
USER PRESET  
USER PRESET  
RECALL  
RETURN  
RED  
050  
050  
050  
GREEN  
BLUE  
RETURN  
Figure 5. Color Temperature Menu  
Color Temperature Menu Field Definitions  
9300K, 7500K, 6500K: These settings change the color temperature to suit your preference. Low color temperature implies warmer (more  
yellow/red) light while high color temperature implies a colder (more blue) light. The unit of measurement is Kelvin (K).  
User Preset: Accesses the User Preset submenu. The options are as follows:  
Red, Green, Blue: These settings let you customize the color temperature to your own preference by adjusting the amount of red, green,  
and blue.  
Return: Takes you back to the previous menu.  
Recall: Restores this menu’s settings to the factory default.  
Return: Takes you back to the main menu.  
10  
C2925M-B (1/07)  
 
OSD ADJUST MENU  
OSD ADJUST  
OSD H-POS  
OSD V-POS  
OSD TIMER  
OSD TRANSPARENCY  
RECALL  
049  
049  
020  
054  
RETURN  
Figure 6. OSD Adjust Menu  
OSD Adjust Menu Field Definitions  
OSD H-Pos: Moves the OSD menu box left or right.  
OSD V-Pos: Moves the OSD menu box up or down.  
OSD Timer: Sets the number of seconds the menu remains on the screen. The maximum setting is 104.  
OSD Transparency: Adjusts the transparency of the OSD menu box.  
Recall: Restores this submenu’s settings to the factory defaults.  
Return: Takes you back to the Main menu.  
AUDIO CONTROL MENU  
AUDIO CONTROL  
OFF  
050  
MUTE  
VOLUME  
RECALL  
RETURN  
Figure 7. Audio Control Menu  
Audio Control Menu Field Definitions  
Mute: Toggles muting on or off. Use the arrow keys to toggle on or off and press the menu button to select.  
Volume: Controls the volume. Highlight and use the left or right arrow keys to increase or decrease the volume. Press the menu button to select.  
Recall: Restores this submenu’s settings to the factory defaults.  
Return: Takes you back to the Main menu.  
C2925M-B (1/07)  
11  
 
Maintenance  
If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and  
cable runs.  
WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No user-serviceable parts are inside.  
Refer servicing to qualified personnel, or contact the Pelco Customer Service Department for assistance, 1-800-289-9100. Refer to the  
Product Warranty and Return Information located on the back inside cover of this manual.  
CLEANING  
Gently wipe your screen with a clean camel hair brush or a soft, clean, lint-free cloth.  
Gently apply pressure to the screen surface to clean the display.  
Do not spray any liquid directly on the screen or the LCD monitor casing.  
Chemical cleaners can damage the screen or the LCD monitor casing.  
12  
C2925M-B (1/07)  
 
Supported Input Modes  
Mode  
Resolution H Freq (kHz) V Freq (Hz)  
0
1
720 x 350  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 1024  
1280 x 1024  
31.469  
31.469  
35.000  
37.861  
37.500  
31.469  
35.156  
37.879  
48.077  
46.875  
49.750  
48.363  
56.476  
58.038  
60.023  
64.000  
80.000  
70.087  
59.940  
66.667  
72.809  
75.000  
70.087  
56.250  
60.317  
72.188  
75.000  
74.500  
60.004  
70.069  
71.918  
75.029  
60.000  
75.000  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
C2925M-B (1/07)  
13  
 
Specifications  
MODELS  
PMCL217  
PMCL219  
17-inch (432 mm) active TFT LCD monitor  
19-inch (483 mm) active TFT LCD monitor  
GENERAL  
LCD Panel Pixel Array  
Panel Aspect Ratio  
Viewing Area  
PMCL217  
1280 X 1024, 75 Hz  
5:4 VGA  
338 x 270 mm  
376 x 301 mm  
PMCL219  
Pixel Pitch  
PMCL217  
PMCL219  
0.264 x 0.264 mm  
0.294 x 0.294 mm  
Brightness  
PMCL217  
PMCL219  
Contrast Ratio  
Backlight Type  
Panel Lamp Life  
Viewing Angle (H/V)  
PMCL217  
300 cd/m2  
250 cd/m2  
500:1  
4 CCFL  
40,000 hours  
140°/130°  
150°/130°  
<10° to >45°  
PMCL219  
Tilt  
Display Colors  
PMCL217  
16.2 million  
16.7 million  
PMCL219  
Response Time  
Speakers  
Front Panel Controls  
Indicators  
8 ms  
2, integrated, 1 W each  
Automatic tuning, menu, access and navigation, power  
LED (power on/off), on-screen (“no signal”)  
ELECTRICAL  
Input Voltage  
Power Consumption  
Input Interfaces  
Video  
100-240 VAC, 50/60 Hz, internal power supply  
<50 W (on), <5 W (standby)  
1, 15-pin D-sub  
1 (L/R), RCA  
Audio  
Horizontal Frequency  
Vertical Frequency  
30 kHz to 80 kHz  
56 Hz to 75 Hz  
PHYSICAL  
Dimensions  
PMCL217  
3.2" D x 15.0" W x 13.4" H (8.0 x 38.1 x 34.1 cm)  
3.3" D x 16.6" W x 14.7" H (8.3 x 42.1 x 37.4 cm)  
PMCL219  
Unit Weight  
PMCL217  
12.4 lb (5.6 kg)  
14.4 lb (6.5 kg)  
PMCL219  
Shipping Weight  
PMCL217  
16.0 lb (7.3 kg)  
19.0 lb (8.6 kg)  
PMCL219  
ENVIRONMENTAL  
Operating Temperature  
Storage Temperature  
Operating Humidity  
Storage Humidity  
32° to 104°F (0° to 40°C)  
-4° to 140°F (-20° to 60°C)  
20% to 85%, noncondensing  
5% to 90%, noncondensing  
14  
C2925M-B (1/07)  
 
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
Exceptions to this warranty are as noted below:  
1. Model and serial number  
Five years on FR/FT/FS Series fiber optic products and TW3000 Series unshielded twisted  
pair transmission products.  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Three years on Spectra® IV products.  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product when  
returned.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
Three years on PMCL200/300/400 Series LCD monitors.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series fixed  
dome products.  
Two years on Spectra III, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned for  
credit, and RA number if returned for repair).  
Two years on Esprit and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Two years (except lamp and color wheel) on Digital Light Processing (DLP®) displays.  
The lamp and color wheel will be covered for a period of 90 days. The air filter is not  
covered under warranty.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA num-  
ber and freight should be prepaid. Ship to the appropriate address below.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are instructed  
to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelcos liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product lia-  
bility, relating to the Products shall not exceed the price paid by the Dealer to Pelco for such  
Products. In no event will Pelco be liable for any special, incidental or consequential damages  
(including loss of use, loss of profit and claims of third parties) however caused, whether by  
the negligence of Pelco or otherwise.  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.  
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union  
regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.  
REVISION HISTORY  
Manual #  
C2925M  
C2925M-A  
C2925M-B  
Date  
12/05  
1/06  
Comments  
Original version.  
For the PMCL217, changed diagonal screen size to 432 mm. For the PMCL219, changed unit depth to 3.3 inches (8.3 cm).  
Changed all response times from 12 ms to 8 ms.  
12/06  
Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco.  
Endura and ExSite are trademarks of Pelco.  
© Copyright 2006, Pelco. All rights reserved.  
DLP is a registered trademark of Texas Instruments, Inc.  
VESA is a registered trademark of the Video Electronics Standards Association.  
 
Worldwide Headquarters  
3500 Pelco Way  
Clovis, California 93612 USA  
USA & Canada  
Tel: 800/289-9100  
Fax: 800/289-9150  
International  
Tel: 1-559/292-1981  
Fax: 1-559/348-1120  
ISO9001  
Australia Canada Finland France Italy Russia Singapore Spain Sweden The Netherlands United Arab Emirates United Kingdom United States  
|
|
|
|
|
|
|
|
|
|
|
|
 

Peerless Industries Projector EXA User Manual
Pelco Air Conditioner DX9000RM User Manual
Petsafe Electric Pet Fence PIF00 12917 User Manual
Philips Blu ray Player BDP7500 MK II User Manual
Philips Portable Radio AE6360 11 User Manual
Philips TV Cables SWV7114W User Manual
Phoenix Gold Speaker TI215D4 User Manual
Pioneer Satellite Radio GEX P900XM User Manual
Pitney Bowes Postal Equipment DM1000 User Manual
POSIFLEX Business Machines Video Game Keyboard KB3200 User Manual